Installing pagure

=================

There are two ways to install pagure:

* via the RPM package (recommended if you are using a RPM-based GNU/Linux distribution)

* via the setup.py

Installing pagure via RPM

-------------------------

Here as well there are two ways of obtaining the RPM:

* From the main repositories

Pagure is packaged for Fedora since Fedora 21 and is available for RHEL and

its derivative via the `EPEL repository <https: epel="" fedoraproject.org="" wiki="">`.</https:>

So installing it is as easy as:

::

    dnf install pagure pagure-milters pagure-ev pagure-webhook

or

::

    yum install pagure pagure-milters pagure-ev pagure-webhook

The ``pagure`` package contains the core of the application and the doc server.

(See the ``Overview`` page for a global overview of the structure of the

project).

The ``pagure-milters`` package contains, as the name says, the milter (a

mail filter to hook into a MTA).

The ``pagure-ev`` package contains the eventsource server.

The ``pagure-webhook`` package contains the web-hook server.

.. note:: The last three packages are optional, pagure would work fine without

        them but the live-update, the webhook and the comment by email

        services will not work.

* From the sources

If you wish to run a newer version of pagure than what is in the repositories

you can easily rebuild it as RPM.

Simply follow these steps:

# Clone the sources::

    git clone https://pagure.io/pagure.git

# Go to the folder::

    cd pagure

# Build a tarball of the latest version of pagure::

    python setup.py sdist

# Build the RPM::

    rpmbuild -ta dist/pagure*.tar.gz

This will build pagure from the version present in your clone.

Once, the RPM is installed the services ``pagure_milter`` and ``pagure_ev``

are ready to be used but the database and the web-application parts still

need to be configured.

Installing pagure via setup.py

------------------------------

Pagure includes in its sources a ``setup.py`` automating the installation

of the web applications of pagure (ie: the core + the doc server).

To install pagure via this mechanism simply follow these steps:

# Clone the sources::

    git clone https://pagure.io/pagure.git

# Go to the folder::

    cd pagure

# Install the latest version of pagure::

    python setup.py build

    sudo python setup.py install

.. note:: To install the eventsource server or the milter, refer to their

        respective documentations.

# Install the additional files as follow:

+------------------------------+------------------------------------------+

|         Source               |             Destination                  |

+=============================+===========================================+

| ``files/pagure.cfg.sample``  | ``/etc/pagure/pagure.cfg``               |

+------------------------------+------------------------------------------+

| ``files/alembic.ini``        | ``/etc/pagure/alembic.ini``              |

+------------------------------+------------------------------------------+

| ``files/pagure.conf``        | ``/etc/httpd/conf.d/pagure.conf``        |

+------------------------------+------------------------------------------+

| ``files/pagure.wsgi``        | ``/usr/share/pagure/pagure.wsgi``        |

+------------------------------+------------------------------------------+

| ``createdb.py``              | ``/usr/share/pagure/pagure_createdb.py`` |

+------------------------------+------------------------------------------+

Set-up pagure

-------------

Once pagure's files are installed, you still need to set up some things.

* Create the folder release

This folder is used by project maintainers to upload the tarball of the

releases of their project.

This folder must be accessible by the user under which the application is

running (in our case: ``git``).

::

    mkdir -p /var/www/releases

    chown git:git /var/www/releases

* Create the folders where the repos, forks and checkouts will be stored

Pagure stores the sources of a project in a git repo, offers a place to

store the project's documentation in another repo, stores a JSON dump of all

issues and of all pull-requests in another two repos, and keeps a local

checkout of remote projects when asked to do remote pull-requests.

All these repositories are stored in different folders that must be

created manually.

For example you can place them under ``/srv/git/repositories/`` which would

make ``/srv/git`` the home of your gitolite user.

You would then create the folders with:

::

    mkdir /srv/git/repositories/{docs,forks,tickets,requests,remotes}

* Configure apache

If installed by RPM, you will find an example apache configuration file

at: ``/etc/httpd/conf.d/pagure.conf``.

If not installed by RPM, the example file is present in the sources at:

``files/pagure.conf``.

Adjust it for your needs.

* Configure the WSGI file

If you installed by RPM, you will find example WSGI files at:

``/usr/share/pagure/pagure.wsgi`` for the core server and ``/usr/share/pagure/docs_pagure.wsgi``

for the doc server.

If you did not install by RPM, these files are present in the sources at:

``files/pagure.wsgi`` and ``files/doc_pagure.wsgi``.

Adjust them for your needs

* Give apache permission to read the repositories owned by the ``git`` user.

For the sake of this document, we assume that the web application runs under

the ``git`` user, the same user as your gitolite user, but apache itself

runs under the ``httpd`` (or ``apache2``) user. So by default, apache

will not be allowed to read git repositories created and managed by gitolite.

To give apache this permission (required to make git clone via http work),

we use file access control lists (aka FACL):

::

    setfacl -m user:apache:rx --default

    setfacl -Rdm user:apache:rx /srv/git

    setfacl -Rm user:apache:rx /srv/git

Where ``/srv/git`` is the home of your gitolite user (which will thus need

to be adjusted for your configuration).

* Set up the configuration file of pagure

This is an important step which concerns the file ``/etc/pagure/pagure.cfg``.

If you have installed pagure by RPM, this file is already there, otherwise

you can find an example one in the sources at: ``files/pagure.cfg.sample``

that you will have to copy to the right location.

Confer the ``Configuration`` section of this documentation for a full

explanation of all the options of pagure.

* Create the database

You first need to create the database itself. For this, since pagure can

work with: `PostgreSQL <http: www.postgresql.org="">`_,</http:>

`MySQL <http: www.mysql.com="">`_ or `MariaDB <http: mariadb.org="">`_, we</http:></http:>

would like to invite you to consult the documentation of your database system

for this operation.

Once you have specified in the configuration file the to url used to connect

to the database, and create the database itself, you can now create the

tables, the database scheme.

To create the database tables, you need to run the script

``/usr/share/pagure/pagure_createdb.py`` and specify the configuration

to use for pagure and for alembic.

For example:

::

    python /usr/share/pagure/pagure_createdb.py -c /etc/pagure/pagure.cfg -i /etc/pagure/alembic.ini

This will tell ``/usr/share/pagure/pagure_createdb.py`` to use the database

information specified in the file ``/etc/pagure/pagure.cfg`` and to stamp

the database at the last alembic revision.

.. warning:: Pagure's default configuration is using sqlite. This is fine

        for development purpose but not for production use as sqlite does

        not support all the operations needed when updating the database

        schema. Do use PostgreSQL, MySQL or MariaDB in production.

For changes to existing tables, we rely on `Alembic <http: alembic.readthedocs.org="">`_.</http:>

It uses `revisions` to perform the upgrades, but to know which upgrades are

needed and which are already done, the current revision needs to be saved

in the database. This will allow alembic to know apply the new revision when

running it.

In the ``alembic.ini`` file, one of the configuration key is most important:

``script_location`` which is the path to the ``versions`` folder containing

all the alembic migration files. The ``sqlalchemy.url`` configuration key if

missing will be replaced by the url filled in the configuration file of

pagure.

.. warning:: Calling ``pagure_createdb.py`` is asked regularly, especially

        to handle database schema changes upon upgrades, but the ``--initial``

        argument should only be used the first time as it will otherwise

        break upgrading the database schema via alembic.

Set up virus scanning

---------------------

Pagure can automatically scan uploaded attachments for viruses using Clam.

To set this up, first install clamav-data-empty, clamav-server,

clamav-server-systemd and clamav-update.

Then edit /etc/freshclam.conf, removing the Example line and run freshclam once

to get an up to date database.

Copy /usr/share/doc/clamav-server/clamd.conf to /etc/clamd.conf and edit that

too, again making sure to remove the Example line. Make sure to set LocalSocket

to a file in a directory that exists, and set User to an existing system user.

Then start the clamd service and set VIRUS_SCAN_ATTACHMENTS = True in the

Pagure configuration.