# Setting Up the Development Environment on MacOSX

## Necessary Software

- git

- brew

- Xcode

- cmake

  - Version 3.2.2 confirmed to work.

- Qt

  - http://download.qt.io/official_releases/qt/5.6/5.6.2/

    - qt-opensource-mac-x64-clang-5.6.2.dmg

- boost

  - http://www.boost.org/users/history/version_1_55_0.html (or later, though only 1.55.0 is supported)

## Building on MacOSX

### 0. Install Qt 5.6 (Most recent is 5.6.2)

### 1. Install Dependent Packages

With homebrew, you can install them with following command.

```

$ brew install glew lz4 libjpeg libpng lzo pkg-config libusb cmake git-lfs libmypaint

```

Or, you should build and install them manually.

### 2. Clone the Repository

```

$ git clone https://github.com/opentoonz/opentoonz

cd opentoonz

git lfs pull

```

### (Optional) Create the stuff Directory

If the directory `/Applications/OpenToonz/OpenToonz_1.1_stuff` does not exist, enter the following command:

```

$ sudo cp -r stuff /Applications/OpenToonz/OpenToonz_1.1_stuff

```

### 3. Build tiff in thirdparty

```

$ cd thirdparty/tiff-4.0.3

$ ./configure && make

```

### 4. Put Boost library into thirdpaty directory

The following assumes `boost_1_55_0.tar.bz2` was downloaded to `~/Downloads`.

```

$ cd ../boost

$ mv ~/Downloads/boost_1_55_0.tar.bz2 .

$ tar xjvf boost_1_55_0.tar.bz2

```

### 5. Update the path to your Qt 5.6 install in opentoonz/toonz/sources/CMakeLists.txt line 160 or 172 

If using Qt 5.6.2, this is unnecessary.

### 6. Copy the lzo header folder to the lzo driver directory

```

$ cd ../lzo

$ cp -r 2.03/include/lzo driver

```

### 6. Build Everything Together

```

$ cd ../../toonz

$ mkdir build

$ cd build

  CMAKE_PREFIX_PATH=~/Qt5.6.2/5.6/clang_64 cmake ../sources

$ make

```

Please be patient as the install will take a while.

### After Building

```

$ open ./toonz/OpenToonz_1.1.app

```