/*****************************************************************************

Copyright (c) 2011, Lab of Parallel Software and Computational Science,ICSAS

All rights reserved.

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions are

met:

   1. Redistributions of source code must retain the above copyright

      notice, this list of conditions and the following disclaimer.

   2. Redistributions in binary form must reproduce the above copyright

      notice, this list of conditions and the following disclaimer in

      the documentation and/or other materials provided with the

      distribution.

   3. Neither the name of the ISCAS nor the names of its contributors may 

      be used to endorse or promote products derived from this software 

      without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 

AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 

ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 

LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 

DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 

SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 

CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 

OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 

USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

**********************************************************************************/

/*********************************************************************/

/* Copyright 2009, 2010 The University of Texas at Austin.           */

/* All rights reserved.                                              */

/*                                                                   */

/* Redistribution and use in source and binary forms, with or        */

/* without modification, are permitted provided that the following   */

/* conditions are met:                                               */

/*                                                                   */

/*   1. Redistributions of source code must retain the above         */

/*      copyright notice, this list of conditions and the following  */

/*      disclaimer.                                                  */

/*                                                                   */

/*   2. Redistributions in binary form must reproduce the above      */

/*      copyright notice, this list of conditions and the following  */

/*      disclaimer in the documentation and/or other materials       */

/*      provided with the distribution.                              */

/*                                                                   */

/*    THIS  SOFTWARE IS PROVIDED  BY THE  UNIVERSITY OF  TEXAS AT    */

/*    AUSTIN  ``AS IS''  AND ANY  EXPRESS OR  IMPLIED WARRANTIES,    */

/*    INCLUDING, BUT  NOT LIMITED  TO, THE IMPLIED  WARRANTIES OF    */

/*    MERCHANTABILITY  AND FITNESS FOR  A PARTICULAR  PURPOSE ARE    */

/*    DISCLAIMED.  IN  NO EVENT SHALL THE UNIVERSITY  OF TEXAS AT    */

/*    AUSTIN OR CONTRIBUTORS BE  LIABLE FOR ANY DIRECT, INDIRECT,    */

/*    INCIDENTAL,  SPECIAL, EXEMPLARY,  OR  CONSEQUENTIAL DAMAGES    */

/*    (INCLUDING, BUT  NOT LIMITED TO,  PROCUREMENT OF SUBSTITUTE    */

/*    GOODS  OR  SERVICES; LOSS  OF  USE,  DATA,  OR PROFITS;  OR    */

/*    BUSINESS INTERRUPTION) HOWEVER CAUSED  AND ON ANY THEORY OF    */

/*    LIABILITY, WHETHER  IN CONTRACT, STRICT  LIABILITY, OR TORT    */

/*    (INCLUDING NEGLIGENCE OR OTHERWISE)  ARISING IN ANY WAY OUT    */

/*    OF  THE  USE OF  THIS  SOFTWARE,  EVEN  IF ADVISED  OF  THE    */

/*    POSSIBILITY OF SUCH DAMAGE.                                    */

/*                                                                   */

/* The views and conclusions contained in the software and           */

/* documentation are those of the authors and should not be          */

/* interpreted as representing official policies, either expressed   */

/* or implied, of The University of Texas at Austin.                 */

/*********************************************************************/

#if defined(__WIN32__) || defined(__WIN64__) || defined(__CYGWIN32__) || defined(__CYGWIN64__)

#define OS_WINDOWS

#endif

#include <stdio.h></stdio.h>

#include <string.h></string.h>

#ifdef OS_WINDOWS

#include <windows.h></windows.h>

#endif

#if defined(__FreeBSD__) || defined(__APPLE__)

#include <sys types.h=""></sys>

#include <sys sysctl.h=""></sys>

#endif

#ifdef linux

#include <sys sysinfo.h=""></sys>

#endif

/* #define FORCE_P2		*/

/* #define FORCE_KATMAI		*/

/* #define FORCE_COPPERMINE	*/

/* #define FORCE_NORTHWOOD	*/

/* #define FORCE_PRESCOTT	*/

/* #define FORCE_BANIAS		*/

/* #define FORCE_YONAH		*/

/* #define FORCE_CORE2		*/

/* #define FORCE_PENRYN		*/

/* #define FORCE_DUNNINGTON	*/

/* #define FORCE_NEHALEM	*/

/* #define FORCE_ATHLON		*/

/* #define FORCE_OPTERON	*/

/* #define FORCE_OPTERON_SSE3	*/

/* #define FORCE_BARCELONA	*/

/* #define FORCE_SHANGHAI	*/

/* #define FORCE_ISTANBUL	*/

/* #define FORCE_SSE_GENERIC	*/

/* #define FORCE_VIAC3		*/

/* #define FORCE_NANO		*/

/* #define FORCE_POWER3		*/

/* #define FORCE_POWER4		*/

/* #define FORCE_POWER5		*/

/* #define FORCE_POWER6		*/

/* #define FORCE_PPCG4		*/

/* #define FORCE_PPC970		*/

/* #define FORCE_PPC970MP	*/

/* #define FORCE_PPC440		*/

/* #define FORCE_PPC440FP2	*/

/* #define FORCE_CELL		*/

/* #define FORCE_SICORTEX	*/

/* #define FORCE_LOONGSON3A      */

/* #define FORCE_LOONGSON3B      */

/* #define FORCE_ITANIUM2	*/

/* #define FORCE_GENERIC	*/

/* #define FORCE_SPARC		*/

/* #define FORCE_SPARCV7	*/

#ifdef FORCE_P2

#define FORCE

#define FORCE_INTEL

#define ARCHITECTURE    "X86"

#define SUBARCHITECTURE "PENTIUM2"

#define ARCHCONFIG   "-DPENTIUM2 " \

		     "-DL1_DATA_SIZE=16384 -DL1_DATA_LINESIZE=32 " \

		     "-DL2_SIZE=512488 -DL2_LINESIZE=32 " \

		     "-DDTB_DEFAULT_ENTRIES=64 -DDTB_SIZE=4096 " \

		     "-DHAVE_CMOV -DHAVE_MMX"

#define LIBNAME   "p2"

#define CORENAME  "P5"

#endif

#ifdef FORCE_COPPERMINE

#define FORCE

#define FORCE_INTEL

#define ARCHITECTURE    "X86"

#define SUBARCHITECTURE "PENTIUM3"

#define ARCHCONFIG   "-DPENTIUM3 " \

		     "-DL1_DATA_SIZE=16384 -DL1_DATA_LINESIZE=32 " \

		     "-DL2_SIZE=262144 -DL2_LINESIZE=32 " \

		     "-DDTB_DEFAULT_ENTRIES=64 -DDTB_SIZE=4096 " \

		     "-DHAVE_CMOV -DHAVE_MMX -DHAVE_SSE "

#define LIBNAME   "coppermine"

#define CORENAME  "COPPERMINE"

#endif

#ifdef FORCE_KATMAI

#define FORCE

#define FORCE_INTEL

#define ARCHITECTURE    "X86"

#define SUBARCHITECTURE "PENTIUM3"

#define ARCHCONFIG   "-DPENTIUM3 " \

		     "-DL1_DATA_SIZE=16384 -DL1_DATA_LINESIZE=32 " \

		     "-DL2_SIZE=524288 -DL2_LINESIZE=32 " \

		     "-DDTB_DEFAULT_ENTRIES=64 -DDTB_SIZE=4096 " \

		     "-DHAVE_CMOV -DHAVE_MMX -DHAVE_SSE "

#define LIBNAME   "katmai"

#define CORENAME  "KATMAI"

#endif

#ifdef FORCE_NORTHWOOD

#define FORCE

#define FORCE_INTEL

#define ARCHITECTURE    "X86"

#define SUBARCHITECTURE "PENTIUM4"

#define ARCHCONFIG   "-DPENTIUM4 " \

		     "-DL1_DATA_SIZE=8192 -DL1_DATA_LINESIZE=64 " \

		     "-DL2_SIZE=524288 -DL2_LINESIZE=64 " \

		     "-DDTB_DEFAULT_ENTRIES=64 -DDTB_SIZE=4096 -DL2_ASSOCIATIVE=8 " \

		     "-DHAVE_CMOV -DHAVE_MMX -DHAVE_SSE -DHAVE_SSE2 "

#define LIBNAME   "northwood"

#define CORENAME  "NORTHWOOD"

#endif

#ifdef FORCE_PRESCOTT

#define FORCE

#define FORCE_INTEL

#define ARCHITECTURE    "X86"

#define SUBARCHITECTURE "PENTIUM4"

#define ARCHCONFIG   "-DPENTIUM4 " \

		     "-DL1_DATA_SIZE=16384 -DL1_DATA_LINESIZE=64 " \

		     "-DL2_SIZE=1048576 -DL2_LINESIZE=64 " \

		     "-DDTB_DEFAULT_ENTRIES=64 -DDTB_SIZE=4096 -DL2_ASSOCIATIVE=8 " \

		     "-DHAVE_CMOV -DHAVE_MMX -DHAVE_SSE -DHAVE_SSE2 -DHAVE_SSE3"

#define LIBNAME   "prescott"

#define CORENAME  "PRESCOTT"

#endif

#ifdef FORCE_BANIAS

#define FORCE

#define FORCE_INTEL

#define ARCHITECTURE    "X86"

#define SUBARCHITECTURE "BANIAS"

#define ARCHCONFIG   "-DPENTIUMM " \

		     "-DL1_DATA_SIZE=32768 -DL1_DATA_LINESIZE=64 " \

		     "-DL2_SIZE=1048576 -DL2_LINESIZE=64 " \

		     "-DDTB_DEFAULT_ENTRIES=64 -DDTB_SIZE=4096 " \

		     "-DHAVE_CMOV -DHAVE_MMX -DHAVE_SSE -DHAVE_SSE2 "

#define LIBNAME   "banias"

#define CORENAME  "BANIAS"

#endif

#ifdef FORCE_YONAH

#define FORCE

#define FORCE_INTEL

#define ARCHITECTURE    "X86"

#define SUBARCHITECTURE "YONAH"

#define ARCHCONFIG   "-DPENTIUMM " \

		     "-DL1_DATA_SIZE=32768 -DL1_DATA_LINESIZE=64 " \

		     "-DL2_SIZE=1048576 -DL2_LINESIZE=64 " \

		     "-DDTB_DEFAULT_ENTRIES=64 -DDTB_SIZE=4096 " \

		     "-DHAVE_CMOV -DHAVE_MMX -DHAVE_SSE -DHAVE_SSE2 "

#define LIBNAME   "yonah"

#define CORENAME  "YONAH"

#endif

#ifdef FORCE_CORE2

#define FORCE

#define FORCE_INTEL

#define ARCHITECTURE    "X86"

#define SUBARCHITECTURE "CONRORE"

#define ARCHCONFIG   "-DCORE2 " \

		     "-DL1_DATA_SIZE=32768 -DL1_DATA_LINESIZE=64 " \

		     "-DL2_SIZE=1048576 -DL2_LINESIZE=64 " \

		     "-DDTB_DEFAULT_ENTRIES=256 -DDTB_SIZE=4096 " \

		     "-DHAVE_CMOV -DHAVE_MMX -DHAVE_SSE -DHAVE_SSE2 -DHAVE_SSE3 -DHAVE_SSSE3"

#define LIBNAME   "core2"

#define CORENAME  "CORE2"

#endif

#ifdef FORCE_PENRYN

#define FORCE

#define FORCE_INTEL

#define ARCHITECTURE    "X86"

#define SUBARCHITECTURE "PENRYN"

#define ARCHCONFIG   "-DPENRYN " \

		     "-DL1_DATA_SIZE=32768 -DL1_DATA_LINESIZE=64 " \

		     "-DL2_SIZE=1048576 -DL2_LINESIZE=64 " \

		     "-DDTB_DEFAULT_ENTRIES=256 -DDTB_SIZE=4096 " \

		     "-DHAVE_CMOV -DHAVE_MMX -DHAVE_SSE -DHAVE_SSE2 -DHAVE_SSE3 -DHAVE_SSSE3 -DHAVE_SSE4_1"

#define LIBNAME   "penryn"

#define CORENAME  "PENRYN"

#endif

#ifdef FORCE_DUNNINGTON

#define FORCE

#define FORCE_INTEL

#define ARCHITECTURE    "X86"

#define SUBARCHITECTURE "DUNNINGTON"

#define ARCHCONFIG   "-DDUNNINGTON " \

		     "-DL1_DATA_SIZE=32768 -DL1_DATA_LINESIZE=64 " \

		     "-DL2_SIZE=1048576 -DL2_LINESIZE=64 " \

		     "-DL3_SIZE=16777216 -DL3_LINESIZE=64 " \

		     "-DDTB_DEFAULT_ENTRIES=256 -DDTB_SIZE=4096 " \

		     "-DHAVE_CMOV -DHAVE_MMX -DHAVE_SSE -DHAVE_SSE2 -DHAVE_SSE3 -DHAVE_SSSE3 -DHAVE_SSE4_1"

#define LIBNAME   "dunnington"

#define CORENAME  "DUNNINGTON"

#endif

#ifdef FORCE_NEHALEM

#define FORCE

#define FORCE_INTEL

#define ARCHITECTURE    "X86"

#define SUBARCHITECTURE "NEHALEM"

#define ARCHCONFIG   "-DNEHALEM " \

		     "-DL1_DATA_SIZE=32768 -DL1_DATA_LINESIZE=64 " \

		     "-DL2_SIZE=262144 -DL2_LINESIZE=64 " \

		     "-DDTB_DEFAULT_ENTRIES=64 -DDTB_SIZE=4096 " \

		     "-DHAVE_CMOV -DHAVE_MMX -DHAVE_SSE -DHAVE_SSE2 -DHAVE_SSE3 -DHAVE_SSSE3 -DHAVE_SSE4_1 -DHAVE_SSE4_2"

#define LIBNAME   "nehalem"

#define CORENAME  "NEHALEM"

#endif

#ifdef FORCE_ATOM

#define FORCE

#define FORCE_INTEL

#define ARCHITECTURE    "X86"

#define SUBARCHITECTURE "ATOM"

#define ARCHCONFIG   "-DATOM " \

		     "-DL1_DATA_SIZE=24576 -DL1_DATA_LINESIZE=64 " \

		     "-DL2_SIZE=524288 -DL2_LINESIZE=64 " \

		     "-DDTB_DEFAULT_ENTRIES=64 -DDTB_SIZE=4096 -DL2_ASSOCIATIVE=4 " \

		     "-DHAVE_CMOV -DHAVE_MMX -DHAVE_SSE -DHAVE_SSE2 -DHAVE_SSE3 -DHAVE_SSSE3"

#define LIBNAME   "atom"

#define CORENAME  "ATOM"

#endif

#ifdef FORCE_ATHLON

#define FORCE

#define FORCE_INTEL

#define ARCHITECTURE    "X86"

#define SUBARCHITECTURE "ATHLON"

#define ARCHCONFIG   "-DATHLON " \

		     "-DL1_DATA_SIZE=65536 -DL1_DATA_LINESIZE=64 " \

		     "-DL2_SIZE=1048576 -DL2_LINESIZE=64 " \

		     "-DDTB_DEFAULT_ENTRIES=32 -DDTB_SIZE=4096 -DHAVE_3DNOW  " \

		     "-DHAVE_3DNOWEX -DHAVE_MMX -DHAVE_SSE "

#define LIBNAME   "athlon"

#define CORENAME  "ATHLON"

#endif

#ifdef FORCE_OPTERON

#define FORCE

#define FORCE_INTEL

#define ARCHITECTURE    "X86"

#define SUBARCHITECTURE "OPTERON"

#define ARCHCONFIG   "-DOPTERON " \

		     "-DL1_DATA_SIZE=65536 -DL1_DATA_LINESIZE=64 " \

		     "-DL2_SIZE=1048576 -DL2_LINESIZE=64 " \

		     "-DDTB_DEFAULT_ENTRIES=32 -DDTB_SIZE=4096 -DHAVE_3DNOW " \

		     "-DHAVE_3DNOWEX -DHAVE_MMX -DHAVE_SSE -DHAVE_SSE2 "

#define LIBNAME   "opteron"

#define CORENAME  "OPTERON"

#endif

#ifdef FORCE_OPTERON_SSE3

#define FORCE

#define FORCE_INTEL

#define ARCHITECTURE    "X86"

#define SUBARCHITECTURE "OPTERON"

#define ARCHCONFIG   "-DOPTERON " \

		     "-DL1_DATA_SIZE=65536 -DL1_DATA_LINESIZE=64 " \

		     "-DL2_SIZE=1048576 -DL2_LINESIZE=64 " \

		     "-DDTB_DEFAULT_ENTRIES=32 -DDTB_SIZE=4096 -DHAVE_3DNOW " \

		     "-DHAVE_3DNOWEX -DHAVE_MMX -DHAVE_SSE -DHAVE_SSE2 -DHAVE_SSE3"

#define LIBNAME   "opteron"

#define CORENAME  "OPTERON"

#endif

#if defined(FORCE_BARCELONA) || defined(FORCE_SHANGHAI) || defined(FORCE_ISTANBUL)

#define FORCE

#define FORCE_INTEL

#define ARCHITECTURE    "X86"

#define SUBARCHITECTURE "BARCELONA"

#define ARCHCONFIG   "-DBARCELONA " \

		     "-DL1_DATA_SIZE=65536 -DL1_DATA_LINESIZE=64 " \

		     "-DL2_SIZE=524288 -DL2_LINESIZE=64  -DL3_SIZE=2097152 " \

		     "-DDTB_DEFAULT_ENTRIES=48 -DDTB_SIZE=4096 -DHAVE_3DNOW " \

		     "-DHAVE_3DNOWEX -DHAVE_MMX -DHAVE_SSE -DHAVE_SSE2 -DHAVE_SSE3 " \

		     "-DHAVE_SSE4A -DHAVE_MISALIGNSSE -DHAVE_128BITFPU -DHAVE_FASTMOVU"

#define LIBNAME   "barcelona"

#define CORENAME  "BARCELONA"

#endif

#ifdef FORCE_SSE_GENERIC

#define FORCE

#define FORCE_INTEL

#define ARCHITECTURE    "X86"

#define SUBARCHITECTURE "GENERIC"

#define ARCHCONFIG   "-DGENERIC " \

		     "-DL1_DATA_SIZE=16384 -DL1_DATA_LINESIZE=64 " \

		     "-DL2_SIZE=524288 -DL2_LINESIZE=64 " \

		     "-DDTB_DEFAULT_ENTRIES=64 -DDTB_SIZE=4096 -DL2_ASSOCIATIVE=8 " \

		     "-DHAVE_CMOV -DHAVE_MMX -DHAVE_SSE -DHAVE_SSE2"

#define LIBNAME   "generic"

#define CORENAME  "GENERIC"

#endif

#ifdef FORCE_VIAC3

#define FORCE

#define FORCE_INTEL

#define ARCHITECTURE    "X86"

#define SUBARCHITECTURE "VIAC3"

#define ARCHCONFIG   "-DVIAC3 " \

		     "-DL1_DATA_SIZE=65536 -DL1_DATA_LINESIZE=32 " \

		     "-DL2_SIZE=65536 -DL2_LINESIZE=32 " \

		     "-DDTB_DEFAULT_ENTRIES=128 -DDTB_SIZE=4096 " \

		     "-DHAVE_MMX -DHAVE_SSE "

#define LIBNAME   "viac3"

#define CORENAME  "VIAC3"

#endif

#ifdef FORCE_NANO

#define FORCE

#define FORCE_INTEL

#define ARCHITECTURE    "X86"

#define SUBARCHITECTURE "NANO"

#define ARCHCONFIG   "-DNANO " \

		     "-DL1_DATA_SIZE=65536 -DL1_DATA_LINESIZE=64 " \

		     "-DL2_SIZE=1048576 -DL2_LINESIZE=64 " \

		     "-DDTB_DEFAULT_ENTRIES=128 -DDTB_SIZE=4096 -DL2_ASSOCIATIVE=8 " \

		     "-DHAVE_CMOV -DHAVE_MMX -DHAVE_SSE -DHAVE_SSE2 -DHAVE_SSE3 -DHAVE_SSSE3"

#define LIBNAME   "nano"

#define CORENAME  "NANO"

#endif

#ifdef FORCE_POWER3

#define FORCE

#define ARCHITECTURE    "POWER"

#define SUBARCHITECTURE "POWER3"

#define SUBDIRNAME      "power"

#define ARCHCONFIG   "-DPOWER3 " \

		     "-DL1_DATA_SIZE=65536 -DL1_DATA_LINESIZE=128 " \

		     "-DL2_SIZE=2097152 -DL2_LINESIZE=128 " \

		     "-DDTB_DEFAULT_ENTRIES=256 -DDTB_SIZE=4096 -DL2_ASSOCIATIVE=8 "

#define LIBNAME   "power3"

#define CORENAME  "POWER3"

#endif

#ifdef FORCE_POWER4

#define FORCE

#define ARCHITECTURE    "POWER"

#define SUBARCHITECTURE "POWER4"

#define SUBDIRNAME      "power"

#define ARCHCONFIG   "-DPOWER4 " \

		     "-DL1_DATA_SIZE=32768 -DL1_DATA_LINESIZE=128 " \

		     "-DL2_SIZE=1509949 -DL2_LINESIZE=128 " \

		     "-DDTB_DEFAULT_ENTRIES=128 -DDTB_SIZE=4096 -DL2_ASSOCIATIVE=6 "

#define LIBNAME   "power4"

#define CORENAME  "POWER4"

#endif

#ifdef FORCE_POWER5

#define FORCE

#define ARCHITECTURE    "POWER"

#define SUBARCHITECTURE "POWER5"

#define SUBDIRNAME      "power"

#define ARCHCONFIG   "-DPOWER5 " \

		     "-DL1_DATA_SIZE=32768 -DL1_DATA_LINESIZE=128 " \

		     "-DL2_SIZE=1509949 -DL2_LINESIZE=128 " \

		     "-DDTB_DEFAULT_ENTRIES=128 -DDTB_SIZE=4096 -DL2_ASSOCIATIVE=6 "

#define LIBNAME   "power5"

#define CORENAME  "POWER5"

#endif

#ifdef FORCE_POWER6

#define FORCE

#define ARCHITECTURE    "POWER"

#define SUBARCHITECTURE "POWER6"

#define SUBDIRNAME      "power"

#define ARCHCONFIG   "-DPOWER6 " \

		     "-DL1_DATA_SIZE=65536 -DL1_DATA_LINESIZE=128 " \

		     "-DL2_SIZE=4194304 -DL2_LINESIZE=128 " \

		     "-DDTB_DEFAULT_ENTRIES=128 -DDTB_SIZE=4096 -DL2_ASSOCIATIVE=8 "

#define LIBNAME   "power6"

#define CORENAME  "POWER6"

#endif

#ifdef FORCE_PPCG4

#define FORCE

#define ARCHITECTURE    "POWER"

#define SUBARCHITECTURE "PPCG4"

#define SUBDIRNAME      "power"

#define ARCHCONFIG   "-DPPCG4 " \

		     "-DL1_DATA_SIZE=32768 -DL1_DATA_LINESIZE=32 " \

		     "-DL2_SIZE=262144 -DL2_LINESIZE=32 " \

		     "-DDTB_DEFAULT_ENTRIES=128 -DDTB_SIZE=4096 -DL2_ASSOCIATIVE=8 "

#define LIBNAME   "ppcg4"

#define CORENAME  "PPCG4"

#endif

#ifdef FORCE_PPC970

#define FORCE

#define ARCHITECTURE    "POWER"

#define SUBARCHITECTURE "PPC970"

#define SUBDIRNAME      "power"

#define ARCHCONFIG   "-DPPC970 " \

		     "-DL1_DATA_SIZE=32768 -DL1_DATA_LINESIZE=128 " \

		     "-DL2_SIZE=512488 -DL2_LINESIZE=128 " \

		     "-DDTB_DEFAULT_ENTRIES=128 -DDTB_SIZE=4096 -DL2_ASSOCIATIVE=8 "

#define LIBNAME   "ppc970"

#define CORENAME  "PPC970"

#endif

#ifdef FORCE_PPC970MP

#define FORCE

#define ARCHITECTURE    "POWER"

#define SUBARCHITECTURE "PPC970"

#define SUBDIRNAME      "power"

#define ARCHCONFIG   "-DPPC970 " \

		     "-DL1_DATA_SIZE=32768 -DL1_DATA_LINESIZE=128 " \

		     "-DL2_SIZE=1024976 -DL2_LINESIZE=128 " \

		     "-DDTB_DEFAULT_ENTRIES=128 -DDTB_SIZE=4096 -DL2_ASSOCIATIVE=8 "

#define LIBNAME   "ppc970mp"

#define CORENAME  "PPC970"

#endif

#ifdef FORCE_PPC440

#define FORCE

#define ARCHITECTURE    "POWER"

#define SUBARCHITECTURE "PPC440"

#define SUBDIRNAME      "power"

#define ARCHCONFIG   "-DPPC440 " \

		     "-DL1_DATA_SIZE=32768 -DL1_DATA_LINESIZE=32 " \

		     "-DL2_SIZE=16384 -DL2_LINESIZE=128 " \

		     "-DDTB_DEFAULT_ENTRIES=64 -DDTB_SIZE=4096 -DL2_ASSOCIATIVE=16 "

#define LIBNAME   "ppc440"

#define CORENAME  "PPC440"

#endif

#ifdef FORCE_PPC440FP2

#define FORCE

#define ARCHITECTURE    "POWER"

#define SUBARCHITECTURE "PPC440FP2"

#define SUBDIRNAME      "power"

#define ARCHCONFIG   "-DPPC440FP2 " \

		     "-DL1_DATA_SIZE=32768 -DL1_DATA_LINESIZE=32 " \

		     "-DL2_SIZE=16384 -DL2_LINESIZE=128 " \

		     "-DDTB_DEFAULT_ENTRIES=64 -DDTB_SIZE=4096 -DL2_ASSOCIATIVE=16 "

#define LIBNAME   "ppc440FP2"

#define CORENAME  "PPC440FP2"

#endif

#ifdef FORCE_CELL

#define FORCE

#define ARCHITECTURE    "POWER"

#define SUBARCHITECTURE "CELL"

#define SUBDIRNAME      "power"

#define ARCHCONFIG   "-DCELL " \

		     "-DL1_DATA_SIZE=262144 -DL1_DATA_LINESIZE=128 " \

		     "-DL2_SIZE=512488 -DL2_LINESIZE=128 " \

		     "-DDTB_DEFAULT_ENTRIES=128 -DDTB_SIZE=4096 -DL2_ASSOCIATIVE=8 "

#define LIBNAME   "cell"

#define CORENAME  "CELL"

#endif

#ifdef FORCE_SICORTEX

#define FORCE

#define ARCHITECTURE    "MIPS"

#define SUBARCHITECTURE "SICORTEX"

#define SUBDIRNAME      "mips"

#define ARCHCONFIG   "-DSICORTEX " \

		     "-DL1_DATA_SIZE=32768 -DL1_DATA_LINESIZE=32 " \

		     "-DL2_SIZE=512488 -DL2_LINESIZE=32 " \

		     "-DDTB_DEFAULT_ENTRIES=32 -DDTB_SIZE=4096 -DL2_ASSOCIATIVE=8 "

#define LIBNAME   "mips"

#define CORENAME  "sicortex"

#endif

#ifdef FORCE_LOONGSON3A

#define FORCE

#define ARCHITECTURE    "MIPS"

#define SUBARCHITECTURE "LOONGSON3A"

#define SUBDIRNAME      "mips64"

#define ARCHCONFIG   "-DLOONGSON3A " \

       "-DL1_DATA_SIZE=65536 -DL1_DATA_LINESIZE=32 " \

       "-DL2_SIZE=512488 -DL2_LINESIZE=32 " \

       "-DDTB_DEFAULT_ENTRIES=64 -DDTB_SIZE=4096 -DL2_ASSOCIATIVE=4 "

#define LIBNAME   "loongson3a"

#define CORENAME  "LOONGSON3A"

#else

#endif

#ifdef FORCE_LOONGSON3B

#define FORCE

#define ARCHITECTURE    "MIPS"

#define SUBARCHITECTURE "LOONGSON3B"

#define SUBDIRNAME      "mips64"

#define ARCHCONFIG   "-DLOONGSON3B " \

       "-DL1_DATA_SIZE=65536 -DL1_DATA_LINESIZE=32 " \

       "-DL2_SIZE=512488 -DL2_LINESIZE=32 " \

       "-DDTB_DEFAULT_ENTRIES=64 -DDTB_SIZE=4096 -DL2_ASSOCIATIVE=4 "

#define LIBNAME   "loongson3b"

#define CORENAME  "LOONGSON3B"

#else

#endif

#ifdef FORCE_ITANIUM2

#define FORCE

#define ARCHITECTURE    "IA64"

#define SUBARCHITECTURE "ITANIUM2"

#define SUBDIRNAME      "ia64"

#define ARCHCONFIG   "-DITANIUM2 " \

		     "-DL1_DATA_SIZE=262144 -DL1_DATA_LINESIZE=128 " \

		     "-DL2_SIZE=1572864 -DL2_LINESIZE=128 -DDTB_SIZE=16384 -DDTB_DEFAULT_ENTRIES=128 "

#define LIBNAME   "itanium2"

#define CORENAME  "itanium2"

#endif

#ifdef FORCE_SPARC

#define FORCE

#define ARCHITECTURE    "SPARC"

#define SUBARCHITECTURE "SPARC"

#define SUBDIRNAME      "sparc"

#define ARCHCONFIG   "-DSPARC -DV9 " \

		     "-DL1_DATA_SIZE=65536 -DL1_DATA_LINESIZE=64 " \

		     "-DL2_SIZE=1572864 -DL2_LINESIZE=64 -DDTB_SIZE=8192 -DDTB_DEFAULT_ENTRIES=64 "

#define LIBNAME   "sparc"

#define CORENAME  "sparc"

#endif

#ifdef FORCE_SPARCV7

#define FORCE

#define ARCHITECTURE    "SPARC"

#define SUBARCHITECTURE "SPARC"

#define SUBDIRNAME      "sparc"

#define ARCHCONFIG   "-DSPARC -DV7 " \

		     "-DL1_DATA_SIZE=65536 -DL1_DATA_LINESIZE=64 " \

		     "-DL2_SIZE=1572864 -DL2_LINESIZE=64 -DDTB_SIZE=8192 -DDTB_DEFAULT_ENTRIES=64 "

#define LIBNAME   "sparcv7"

#define CORENAME  "sparcv7"

#endif

#ifdef FORCE_GENERIC

#define FORCE

#define ARCHITECTURE    "GENERIC"

#define SUBARCHITECTURE "GENERIC"

#define SUBDIRNAME      "generic"

#define ARCHCONFIG   "-DGENERIC " \

		     "-DL1_DATA_SIZE=32768 -DL1_DATA_LINESIZE=128 " \

		     "-DL2_SIZE=512488 -DL2_LINESIZE=128 " \

		     "-DDTB_DEFAULT_ENTRIES=128 -DDTB_SIZE=4096 -DL2_ASSOCIATIVE=8 "

#define LIBNAME   "generic"

#define CORENAME  "generic"

#endif

#ifndef FORCE

#if defined(__powerpc__) || defined(__powerpc) || defined(powerpc) || \

    defined(__PPC__) || defined(PPC) || defined(_POWER) || defined(__POWERPC__)

#ifndef POWER

#define POWER

#endif

#define OPENBLAS_SUPPORTED

#endif

#if defined(__i386__) || (__x86_64__)

#include "cpuid_x86.c"

#define OPENBLAS_SUPPORTED

#endif

#ifdef __ia64__

#include "cpuid_ia64.c"

#define OPENBLAS_SUPPORTED

#endif

#ifdef __alpha

#include "cpuid_alpha.c"

#define OPENBLAS_SUPPORTED

#endif

#ifdef POWER

#include "cpuid_power.c"

#define OPENBLAS_SUPPORTED

#endif

#ifdef sparc

#include "cpuid_sparc.c"

#define OPENBLAS_SUPPORTED

#endif

#ifdef __mips__

#include "cpuid_mips.c"

#define OPENBLAS_SUPPORTED

#endif

#ifndef OPENBLAS_SUPPORTED

#error "This arch/CPU is not supported by OpenBLAS."

#endif

#else

#endif

static int get_num_cores(void) {

#ifdef OS_WINDOWS

  SYSTEM_INFO sysinfo;

#elif defined(__FreeBSD__) || defined(__APPLE__)

  int m[2], count;

  size_t len;

#endif

#ifdef linux

  return get_nprocs();

#elif defined(OS_WINDOWS)

  GetSystemInfo(&sysinfo);

  return sysinfo.dwNumberOfProcessors;

#elif defined(__FreeBSD__) || defined(__APPLE__)

  m[0] = CTL_HW;

  m[1] = HW_NCPU;

  len = sizeof(int);

  sysctl(m, 2, &count, &len, NULL, 0);

  return count;

#else

  return 2;

#endif

}

int main(int argc, char *argv[]){

#ifdef FORCE

  char buffer[8192], *p, *q;

  int length;

#endif

  if (argc == 1) return 0;

  switch (argv[1][0]) {

  case '0' : /* for Makefile */

#ifdef FORCE

    printf("CORE=%s\n", CORENAME);

#else    

#if defined(__i386__) || defined(__x86_64__) || defined(POWER) || defined(__mips__)

    printf("CORE=%s\n", get_corename());

#endif

#endif

#ifdef FORCE

    printf("LIBCORE=%s\n", LIBNAME);

#else

    printf("LIBCORE=");

    get_libname();

    printf("\n");

#endif

    printf("NUM_CORES=%d\n", get_num_cores());

#if defined(__i386__) || defined(__x86_64__)

#ifndef FORCE

    get_sse();

#else

    sprintf(buffer, "%s", ARCHCONFIG);

    p = &buffer[0];

    while (*p) {

      if ((*p == '-') && (*(p + 1) == 'D')) {

	p += 2;

	while ((*p != ' ') && (*p != '\0')) {

	  if (*p == '=') {

	    printf("=");

	    p ++;

	    while ((*p != ' ') && (*p != '\0')) {

	      printf("%c", *p);

	      p ++;

	    }

	  } else {

	    printf("%c", *p);

	    p ++;

	    if ((*p == ' ') || (*p =='\0')) printf("=1");

	  }

	}

	printf("\n");

      } else p ++;

    }

#endif

#endif

#ifndef OS_WINDOWS

    printf("MAKE += -j %d\n", get_num_cores());

#endif

    break;

  case '1' : /* For config.h */

#ifdef FORCE

    sprintf(buffer, "%s -DCORE_%s\n", ARCHCONFIG, CORENAME);

    p = &buffer[0];

    while (*p) {

      if ((*p == '-') && (*(p + 1) == 'D')) {

	p += 2;

	printf("#define ");

	while ((*p != ' ') && (*p != '\0')) {

	  if (*p == '=') {

	    printf(" ");

	    p ++;

	    while ((*p != ' ') && (*p != '\0')) {

	      printf("%c", *p);

	      p ++;

	    }

	  } else {

	    printf("%c", *p);

	    p ++;

	  }

	}

	printf("\n");

      } else p ++;

    }

#else

    get_cpuconfig();

#endif

 break;

  case '2' : /* SMP */

    if (get_num_cores() > 1) printf("SMP=1\n");

    break;

  }

  fflush(stdout);

  return 0;

}