# Makefile.in generated by automake 1.12.4 from Makefile.am.

# @configure_input@

# Copyright (C) 1994-2012 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation

# gives unlimited permission to copy and/or distribute it,

# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY, to the extent permitted by law; without

# even the implied warranty of MERCHANTABILITY or FITNESS FOR A

# PARTICULAR PURPOSE.

@SET_MAKE@

# Tag Image File Format (TIFF) Software

#

# Copyright (C) 2004, Andrey Kiselev <dron@ak4719.spb.edu></dron@ak4719.spb.edu>

#

# Permission to use, copy, modify, distribute, and sell this software and 

# its documentation for any purpose is hereby granted without fee, provided

# that (i) the above copyright notices and this permission notice appear in

# all copies of the software and related documentation, and (ii) the names of

# Sam Leffler and Silicon Graphics may not be used in any advertising or

# publicity relating to the software without the specific, prior written

# permission of Sam Leffler and Silicon Graphics.

# 

# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, 

# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY 

# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  

# 

# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR

# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,

# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,

# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF 

# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 

# OF THIS SOFTWARE.

# Process this file with automake to produce Makefile.in.

VPATH = @srcdir@

am__make_dryrun = \

  { \

    am__dry=no; \

    case $$MAKEFLAGS in \

      *\\[\ \	]*) \

        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \

          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \

      *) \

        for am__flg in $$MAKEFLAGS; do \

          case $$am__flg in \

            *=*|--*) ;; \

            *n*) am__dry=yes; break;; \

          esac; \

        done;; \

    esac; \

    test $$am__dry = yes; \

  }

pkgdatadir = $(datadir)/@PACKAGE@

pkgincludedir = $(includedir)/@PACKAGE@

pkglibdir = $(libdir)/@PACKAGE@

pkglibexecdir = $(libexecdir)/@PACKAGE@

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd

install_sh_DATA = $(install_sh) -c -m 644

install_sh_PROGRAM = $(install_sh) -c

install_sh_SCRIPT = $(install_sh) -c

INSTALL_HEADER = $(INSTALL_DATA)

transform = $(program_transform_name)

NORMAL_INSTALL = :

PRE_INSTALL = :

POST_INSTALL = :

NORMAL_UNINSTALL = :

PRE_UNINSTALL = :

POST_UNINSTALL = :

build_triplet = @build@

host_triplet = @host@

subdir = contrib

DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in \

	$(top_srcdir)/config/mkinstalldirs

ACLOCAL_M4 = $(top_srcdir)/aclocal.m4

am__aclocal_m4_deps = $(top_srcdir)/m4/acinclude.m4 \

	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \

	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \

	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac

am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \

	$(ACLOCAL_M4)

mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs

CONFIG_HEADER = $(top_builddir)/libtiff/tif_config.h \

	$(top_builddir)/libtiff/tiffconf.h

CONFIG_CLEAN_FILES =

CONFIG_CLEAN_VPATH_FILES =

AM_V_P = $(am__v_P_@AM_V@)

am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)

am__v_P_0 = false

am__v_P_1 = :

AM_V_GEN = $(am__v_GEN_@AM_V@)

am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)

am__v_GEN_0 = @echo "  GEN     " $@;

am__v_GEN_1 = 

AM_V_at = $(am__v_at_@AM_V@)

am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)

am__v_at_0 = @

am__v_at_1 = 

SOURCES =

DIST_SOURCES =

RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \

	html-recursive info-recursive install-data-recursive \

	install-dvi-recursive install-exec-recursive \

	install-html-recursive install-info-recursive \

	install-pdf-recursive install-ps-recursive install-recursive \

	installcheck-recursive installdirs-recursive pdf-recursive \

	ps-recursive uninstall-recursive

am__can_run_installinfo = \

  case $$AM_UPDATE_INFO_DIR in \

    n|no|NO) false;; \

    *) (install-info --version) >/dev/null 2>&1;; \

  esac

RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\

  distclean-recursive maintainer-clean-recursive

AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \

	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \

	distdir

ETAGS = etags

CTAGS = ctags

DIST_SUBDIRS = $(SUBDIRS)

DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

am__relativize = \

  dir0=`pwd`; \

  sed_first='s,^\([^/]*\)/.*$$,\1,'; \

  sed_rest='s,^[^/]*/*,,'; \

  sed_last='s,^.*/\([^/]*\)$$,\1,'; \

  sed_butlast='s,/*[^/]*$$,,'; \

  while test -n "$$dir1"; do \

    first=`echo "$$dir1" | sed -e "$$sed_first"`; \

    if test "$$first" != "."; then \

      if test "$$first" = ".."; then \

        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \

        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \

      else \

        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \

        if test "$$first2" = "$$first"; then \

          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \

        else \

          dir2="../$$dir2"; \

        fi; \

        dir0="$$dir0"/"$$first"; \

      fi; \

    fi; \

    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \

  done; \

  reldir="$$dir2"

ACLOCAL = @ACLOCAL@

AMTAR = @AMTAR@

AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@

AR = @AR@

AS = @AS@

AUTOCONF = @AUTOCONF@

AUTOHEADER = @AUTOHEADER@

AUTOMAKE = @AUTOMAKE@

AWK = @AWK@

CC = @CC@

CCDEPMODE = @CCDEPMODE@

CFLAGS = @CFLAGS@

CPP = @CPP@

CPPFLAGS = @CPPFLAGS@

CXX = @CXX@

CXXCPP = @CXXCPP@

CXXDEPMODE = @CXXDEPMODE@

CXXFLAGS = @CXXFLAGS@

CYGPATH_W = @CYGPATH_W@

DEFS = @DEFS@

DEPDIR = @DEPDIR@

DLLTOOL = @DLLTOOL@

DSYMUTIL = @DSYMUTIL@

DUMPBIN = @DUMPBIN@

ECHO_C = @ECHO_C@

ECHO_N = @ECHO_N@

ECHO_T = @ECHO_T@

EGREP = @EGREP@

EXEEXT = @EXEEXT@

FGREP = @FGREP@

GLUT_CFLAGS = @GLUT_CFLAGS@

GLUT_LIBS = @GLUT_LIBS@

GLU_CFLAGS = @GLU_CFLAGS@

GLU_LIBS = @GLU_LIBS@

GL_CFLAGS = @GL_CFLAGS@

GL_LIBS = @GL_LIBS@

GREP = @GREP@

INSTALL = @INSTALL@

INSTALL_DATA = @INSTALL_DATA@

INSTALL_PROGRAM = @INSTALL_PROGRAM@

INSTALL_SCRIPT = @INSTALL_SCRIPT@

INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@

LD = @LD@

LDFLAGS = @LDFLAGS@

LIBDIR = @LIBDIR@

LIBOBJS = @LIBOBJS@

LIBS = @LIBS@

LIBTIFF_ALPHA_VERSION = @LIBTIFF_ALPHA_VERSION@

LIBTIFF_DOCDIR = @LIBTIFF_DOCDIR@

LIBTIFF_MAJOR_VERSION = @LIBTIFF_MAJOR_VERSION@

LIBTIFF_MICRO_VERSION = @LIBTIFF_MICRO_VERSION@

LIBTIFF_MINOR_VERSION = @LIBTIFF_MINOR_VERSION@

LIBTIFF_RELEASE_DATE = @LIBTIFF_RELEASE_DATE@

LIBTIFF_VERSION = @LIBTIFF_VERSION@

LIBTIFF_VERSION_INFO = @LIBTIFF_VERSION_INFO@

LIBTOOL = @LIBTOOL@

LIPO = @LIPO@

LN_S = @LN_S@

LTLIBOBJS = @LTLIBOBJS@

MAINT = @MAINT@

MAKEINFO = @MAKEINFO@

MANIFEST_TOOL = @MANIFEST_TOOL@

MKDIR_P = @MKDIR_P@

NM = @NM@

NMEDIT = @NMEDIT@

OBJDUMP = @OBJDUMP@

OBJEXT = @OBJEXT@

OTOOL = @OTOOL@

OTOOL64 = @OTOOL64@

PACKAGE = @PACKAGE@

PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

PACKAGE_NAME = @PACKAGE_NAME@

PACKAGE_STRING = @PACKAGE_STRING@

PACKAGE_TARNAME = @PACKAGE_TARNAME@

PACKAGE_URL = @PACKAGE_URL@

PACKAGE_VERSION = @PACKAGE_VERSION@

PATH_SEPARATOR = @PATH_SEPARATOR@

PTHREAD_CC = @PTHREAD_CC@

PTHREAD_CFLAGS = @PTHREAD_CFLAGS@

PTHREAD_LIBS = @PTHREAD_LIBS@

RANLIB = @RANLIB@

SED = @SED@

SET_MAKE = @SET_MAKE@

SHELL = @SHELL@

STRIP = @STRIP@

VERSION = @VERSION@

XMKMF = @XMKMF@

X_CFLAGS = @X_CFLAGS@

X_EXTRA_LIBS = @X_EXTRA_LIBS@

X_LIBS = @X_LIBS@

X_PRE_LIBS = @X_PRE_LIBS@

abs_builddir = @abs_builddir@

abs_srcdir = @abs_srcdir@

abs_top_builddir = @abs_top_builddir@

abs_top_srcdir = @abs_top_srcdir@

ac_ct_AR = @ac_ct_AR@

ac_ct_CC = @ac_ct_CC@

ac_ct_CXX = @ac_ct_CXX@

ac_ct_DUMPBIN = @ac_ct_DUMPBIN@

am__include = @am__include@

am__leading_dot = @am__leading_dot@

am__quote = @am__quote@

am__tar = @am__tar@

am__untar = @am__untar@

ax_pthread_config = @ax_pthread_config@

bindir = @bindir@

build = @build@

build_alias = @build_alias@

build_cpu = @build_cpu@

build_os = @build_os@

build_vendor = @build_vendor@

builddir = @builddir@

datadir = @datadir@

datarootdir = @datarootdir@

docdir = @docdir@

dvidir = @dvidir@

exec_prefix = @exec_prefix@

host = @host@

host_alias = @host_alias@

host_cpu = @host_cpu@

host_os = @host_os@

host_vendor = @host_vendor@

htmldir = @htmldir@

includedir = @includedir@

infodir = @infodir@

install_sh = @install_sh@

libdir = @libdir@

libexecdir = @libexecdir@

localedir = @localedir@

localstatedir = @localstatedir@

mandir = @mandir@

mkdir_p = @mkdir_p@

oldincludedir = @oldincludedir@

pdfdir = @pdfdir@

prefix = @prefix@

program_transform_name = @program_transform_name@

psdir = @psdir@

sbindir = @sbindir@

sharedstatedir = @sharedstatedir@

srcdir = @srcdir@

sysconfdir = @sysconfdir@

target_alias = @target_alias@

tiff_libs_private = @tiff_libs_private@

top_build_prefix = @top_build_prefix@

top_builddir = @top_builddir@

top_srcdir = @top_srcdir@

EXTRA_DIST = README

SUBDIRS = addtiffo dbs iptcutil mfs pds ras stream tags win_dib

all: all-recursive

.SUFFIXES:

$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)

	@for dep in $?; do \

	  case '$(am__configure_deps)' in \

	    *$$dep*) \

	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \

	        && { if test -f $@; then exit 0; else break; fi; }; \

	      exit 1;; \

	  esac; \

	done; \

	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign contrib/Makefile'; \

	$(am__cd) $(top_srcdir) && \

	  $(AUTOMAKE) --foreign contrib/Makefile

.PRECIOUS: Makefile

Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status

	@case '$?' in \

	  *config.status*) \

	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \

	  *) \

	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \

	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \

	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)

	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)

	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)

	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(am__aclocal_m4_deps):

mostlyclean-libtool:

	-rm -f *.lo

clean-libtool:

	-rm -rf .libs _libs

# This directory's subdirectories are mostly independent; you can cd

# into them and run 'make' without going through this Makefile.

# To change the values of 'make' variables: instead of editing Makefiles,

# (1) if the variable is set in 'config.status', edit 'config.status'

#     (which will cause the Makefiles to be regenerated when you run 'make');

# (2) otherwise, pass the desired values on the 'make' command line.

$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):

	@fail= failcom='exit 1'; \

	for f in x $$MAKEFLAGS; do \

	  case $$f in \

	    *=* | --[!k]*);; \

	    *k*) failcom='fail=yes';; \

	  esac; \

	done; \

	dot_seen=no; \

	target=`echo $@ | sed s/-recursive//`; \

	case "$@" in \

	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \

	  *) list='$(SUBDIRS)' ;; \

	esac; \

	for subdir in $$list; do \

	  echo "Making $$target in $$subdir"; \

	  if test "$$subdir" = "."; then \

	    dot_seen=yes; \

	    local_target="$$target-am"; \

	  else \

	    local_target="$$target"; \

	  fi; \

	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \

	  || eval $$failcom; \

	done; \

	if test "$$dot_seen" = "no"; then \

	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \

	fi; test -z "$$fail"

tags-recursive:

	list='$(SUBDIRS)'; for subdir in $$list; do \

	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \

	done

ctags-recursive:

	list='$(SUBDIRS)'; for subdir in $$list; do \

	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \

	done

cscopelist-recursive:

	list='$(SUBDIRS)'; for subdir in $$list; do \

	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \

	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)

	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \

	unique=`for i in $$list; do \

	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

	  done | \

	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \

	      END { if (nonempty) { for (i in files) print i; }; }'`; \

	mkid -fID $$unique

tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \

		$(TAGS_FILES) $(LISP)

	set x; \

	here=`pwd`; \

	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \

	  include_option=--etags-include; \

	  empty_fix=.; \

	else \

	  include_option=--include; \

	  empty_fix=; \

	fi; \

	list='$(SUBDIRS)'; for subdir in $$list; do \

	  if test "$$subdir" = .; then :; else \

	    test ! -f $$subdir/TAGS || \

	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \

	  fi; \

	done; \

	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \

	unique=`for i in $$list; do \

	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

	  done | \

	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \

	      END { if (nonempty) { for (i in files) print i; }; }'`; \

	shift; \

	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \

	  test -n "$$unique" || unique=$$empty_fix; \

	  if test $$# -gt 0; then \

	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

	      "$$@" $$unique; \

	  else \

	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

	      $$unique; \

	  fi; \

	fi

ctags: CTAGS

CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \

		$(TAGS_FILES) $(LISP)

	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \

	unique=`for i in $$list; do \

	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

	  done | \

	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \

	      END { if (nonempty) { for (i in files) print i; }; }'`; \

	test -z "$(CTAGS_ARGS)$$unique" \

	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \

	     $$unique

GTAGS:

	here=`$(am__cd) $(top_builddir) && pwd` \

	  && $(am__cd) $(top_srcdir) \

	  && gtags -i $(GTAGS_ARGS) "$$here"

cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)

	list='$(SOURCES) $(HEADERS) $(LISP)'; \

	case "$(srcdir)" in \

	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \

	  *) sdir=$(subdir)/$(srcdir) ;; \

	esac; \

	for i in $$list; do \

	  if test -f "$$i"; then \

	    echo "$(subdir)/$$i"; \

	  else \

	    echo "$$sdir/$$i"; \

	  fi; \

	done >> $(top_builddir)/cscope.files

distclean-tags:

	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)

	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

	list='$(DISTFILES)'; \

	  dist_files=`for file in $$list; do echo $$file; done | \

	  sed -e "s|^$$srcdirstrip/||;t" \

	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \

	case $$dist_files in \

	  */*) $(MKDIR_P) `echo "$$dist_files" | \

			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \

			   sort -u` ;; \

	esac; \

	for file in $$dist_files; do \

	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \

	  if test -d $$d/$$file; then \

	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \

	    if test -d "$(distdir)/$$file"; then \

	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

	    fi; \

	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \

	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \

	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

	    fi; \

	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \

	  else \

	    test -f "$(distdir)/$$file" \

	    || cp -p $$d/$$file "$(distdir)/$$file" \

	    || exit 1; \

	  fi; \

	done

	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \

	  if test "$$subdir" = .; then :; else \

	    $(am__make_dryrun) \

	      || test -d "$(distdir)/$$subdir" \

	      || $(MKDIR_P) "$(distdir)/$$subdir" \

	      || exit 1; \

	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \

	    $(am__relativize); \

	    new_distdir=$$reldir; \

	    dir1=$$subdir; dir2="$(top_distdir)"; \

	    $(am__relativize); \

	    new_top_distdir=$$reldir; \

	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \

	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \

	    ($(am__cd) $$subdir && \

	      $(MAKE) $(AM_MAKEFLAGS) \

	        top_distdir="$$new_top_distdir" \

	        distdir="$$new_distdir" \

		am__remove_distdir=: \

		am__skip_length_check=: \

		am__skip_mode_fix=: \

	        distdir) \

	      || exit 1; \

	  fi; \

	done

check-am: all-am

check: check-recursive

all-am: Makefile

installdirs: installdirs-recursive

installdirs-am:

install: install-recursive

install-exec: install-exec-recursive

install-data: install-data-recursive

uninstall: uninstall-recursive

install-am: all-am

	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive

install-strip:

	if test -z '$(STRIP)'; then \

	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \

	      install; \

	else \

	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \

	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \

	fi

mostlyclean-generic:

clean-generic:

distclean-generic:

	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:

	@echo "This command is intended for maintainers to use"

	@echo "it deletes files that may require special tools to rebuild."

clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive

	-rm -f Makefile

distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am:

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive

	-rm -f Makefile

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am:

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \

	cscopelist-recursive ctags-recursive install-am install-strip \

	tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \

	all all-am check check-am clean clean-generic clean-libtool \

	cscopelist cscopelist-recursive ctags ctags-recursive \

	distclean distclean-generic distclean-libtool distclean-tags \

	distdir dvi dvi-am html html-am info info-am install \

	install-am install-data install-data-am install-dvi \

	install-dvi-am install-exec install-exec-am install-html \

	install-html-am install-info install-info-am install-man \

	install-pdf install-pdf-am install-ps install-ps-am \

	install-strip installcheck installcheck-am installdirs \

	installdirs-am maintainer-clean maintainer-clean-generic \

	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \

	ps ps-am tags tags-recursive uninstall uninstall-am

# Tell versions [3.59,3.63) of GNU make to not export all variables.

# Otherwise a system limit (for SysV at least) may be exceeded.

.NOEXPORT: