// TnzCore includes

#include "tmeshimage.h"

#include "tgl.h"

#include "tundo.h"

// TnzExt includes

#include "ext/plasticdeformerstorage.h"

// tcg includes

#include "tcg/tcg_macros.h"

#include "tcg/tcg_point_ops.h"

#include "tcg/tcg_iterator_ops.h"

#include "tcg/tcg_function_types.h"

#include "tcg/tcg_deleter_types.h"

#include "tcg/tcg_unique_ptr.h"

// boost includes

#include <boost unordered_set.hpp=""></boost>

#include <boost unordered_map.hpp=""></boost>

using namespace tcg::bgl;

#include <boost breadth_first_search.hpp="" graph=""></boost>

// STD includes

#include <stack></stack>

#include "plastictool.h"

using namespace PlasticToolLocals;

//****************************************************************************************

//    Local namespace  stuff

//****************************************************************************************

namespace {

typedef PlasticTool::MeshIndex MeshIndex;

typedef TTextureMesh::vertex_type vertex_type;

typedef TTextureMesh::edge_type edge_type;

typedef TTextureMesh::face_type face_type;

//------------------------------------------------------------------------

bool borderEdge(const TTextureMesh &mesh, int e) {

  return (mesh.edge(e).facesCount() < 2);

}

bool borderVertex(const TTextureMesh &mesh, int v) {

  const TTextureVertex &vx = mesh.vertex(v);

  tcg::vertex_traits<ttexturevertex>::edges_const_iterator et,</ttexturevertex>

      eEnd(vx.edgesEnd());

  for (et = vx.edgesBegin(); et != eEnd; ++et) {

    if (borderEdge(mesh, *et)) return true;

  }

  return false;

}

//============================================================================

bool testSwapEdge(const TTextureMesh &mesh, int e) {

  return (mesh.edge(e).facesCount() == 2);

}

//------------------------------------------------------------------------

bool testCollapseEdge(const TTextureMesh &mesh, int e) {

  struct Locals {

    const TTextureMesh &m_mesh;

    int m_e;

    const TTextureMesh::edge_type &m_ed;

    bool testTrianglesCount() {

      // There must be at least one remanining triangle

      return (m_mesh.facesCount() > m_ed.facesCount());

    }

    bool testBoundary() {

      // Must not join two non-adjacent boundary vertices

      return (!borderVertex(m_mesh, m_ed.vertex(0)) ||

              !borderVertex(m_mesh, m_ed.vertex(1)) || borderEdge(m_mesh, m_e));

    }

    bool testAdjacency() {

      // See TriMesh<>::collapseEdge()

      // Retrieve allowed adjacent vertices

      int f, fCount = m_ed.facesCount();

      int allowedV[6], *avt, *avEnd = allowedV + 3 * fCount;

      for (f = 0, avt = allowedV; f != fCount; ++f, avt += 3)

        m_mesh.faceVertices(m_ed.face(f), avt[0], avt[1], avt[2]);

      // Test adjacent vertices

      int v0 = m_ed.vertex(0), v1 = m_ed.vertex(1);

      const vertex_type &vx0 = m_mesh.vertex(v0);

      tcg::vertex_traits<vertex_type>::edges_const_iterator et,</vertex_type>

          eEnd = vx0.edgesEnd();

      for (et = vx0.edgesBegin(); et != eEnd; ++et) {

        int otherV = m_mesh.edge(*et).otherVertex(v0);

        if (m_mesh.edgeInciding(v1, otherV) >= 0) {

          // Adjacent vertex - must be found in the allowed list

          if (std::find(allowedV, avEnd, otherV) == avEnd) return false;

        }

      }

      return true;

    }

  } locals = {mesh, e, mesh.edge(e)};

  return (locals.testTrianglesCount() && locals.testBoundary() &&

          locals.testAdjacency());

}

}  // namespace

//****************************************************************************************

//    PlasticToolLocals  stuff

//****************************************************************************************

namespace PlasticToolLocals {

struct Closer {

  const TTextureMesh &m_mesh;

  TPointD m_pos;

  double dist2(const TTextureMesh::vertex_type &a) {

    return tcg::point_ops::dist2<tpointd>(a.P(), m_pos);</tpointd>

  }

  double dist2(const TTextureMesh::edge_type &a) {

    const TTextureMesh::vertex_type &avx0 = m_mesh.vertex(a.vertex(0)),

                                    &avx1 = m_mesh.vertex(a.vertex(1));

    return sq(tcg::point_ops::segDist<tpointd>(avx0.P(), avx1.P(), m_pos));</tpointd>

  }

  bool operator()(const TTextureMesh::vertex_type &a,

                  const TTextureMesh::vertex_type &b) {

    return (dist2(a) < dist2(b));

  }

  bool operator()(const TTextureMesh::edge_type &a,

                  const TTextureMesh::edge_type &b) {

    return (dist2(a) < dist2(b));

  }

};

//==============================================================================

std::pair<double, int=""> closestVertex(const TTextureMesh &mesh,</double,>

                                     const TPointD &pos) {

  Closer closer = {mesh, pos};

  int vIdx      = int(

      std::min_element(mesh.vertices().begin(), mesh.vertices().end(), closer)

          .index());

  return std::make_pair(closer.dist2(mesh.vertex(vIdx)), vIdx);

}

//------------------------------------------------------------------------

std::pair<double, int=""> closestEdge(const TTextureMesh &mesh,</double,>

                                   const TPointD &pos) {

  Closer closer = {mesh, pos};

  int eIdx =

      int(std::min_element(mesh.edges().begin(), mesh.edges().end(), closer)

              .index());

  return std::make_pair(closer.dist2(mesh.edge(eIdx)), eIdx);

}

//------------------------------------------------------------------------

std::pair<double, meshindex=""> closestVertex(const TMeshImage &mi,</double,>

                                           const TPointD &pos) {

  std::pair<double, meshindex=""> closest((std::numeric_limits<double>::max)(),</double></double,>

                                       MeshIndex());

  const TMeshImage::meshes_container &meshes = mi.meshes();

  TMeshImage::meshes_container::const_iterator mt, mEnd = meshes.end();

  for (mt = meshes.begin(); mt != mEnd; ++mt) {

    const std::pair<double, int=""> &candidateIdx = closestVertex(**mt, pos);</double,>

    std::pair<double, meshindex=""> candidate(</double,>

        candidateIdx.first,

        MeshIndex(mt - meshes.begin(), candidateIdx.second));

    if (candidate < closest) closest = candidate;

  }

  return closest;

}

//------------------------------------------------------------------------

std::pair<double, meshindex=""> closestEdge(const TMeshImage &mi,</double,>

                                         const TPointD &pos) {

  std::pair<double, meshindex=""> closest((std::numeric_limits<double>::max)(),</double></double,>

                                       MeshIndex());

  const TMeshImage::meshes_container &meshes = mi.meshes();

  TMeshImage::meshes_container::const_iterator mt, mEnd = meshes.end();

  for (mt = meshes.begin(); mt != mEnd; ++mt) {

    const std::pair<double, int=""> &candidateIdx = closestEdge(**mt, pos);</double,>

    std::pair<double, meshindex=""> candidate(</double,>

        candidateIdx.first,

        MeshIndex(mt - meshes.begin(), candidateIdx.second));

    if (candidate < closest) closest = candidate;

  }

  return closest;

}

}  // namespace

//****************************************************************************************

//    Cut Mesh  operation

//****************************************************************************************

namespace {

struct EdgeCut {

  int m_vIdx;  //!< Vertex index to cut from.

  int m_eIdx;  //!< Edge index to cut.

  EdgeCut(int vIdx, int eIdx) : m_vIdx(vIdx), m_eIdx(eIdx) {}

};

struct VertexOccurrence {

  int m_count;               //!< Number of times a vertex occurs.

  int m_adjacentEdgeIdx[2];  //!< Edge indexes of which a vertex is endpoint.

};

//============================================================================

bool buildEdgeCuts(const TMeshImage &mi,

                   const PlasticTool::MeshSelection &edgesSelection,

                   int &meshIdx, std::vector<edgecut> &edgeCuts) {</edgecut>

  typedef PlasticTool::MeshSelection::objects_container edges_container;

  typedef PlasticTool::MeshIndex MeshIndex;

  typedef boost::unordered_map<int, vertexoccurrence=""> VertexOccurrencesMap;</int,>

  struct locals {

    static bool differentMesh(const MeshIndex &a, const MeshIndex &b) {

      return (a.m_meshIdx != b.m_meshIdx);

    }

    static int testSingleMesh(const edges_container &edges) {

      assert(!edges.empty());

      return (std::find_if(edges.begin(), edges.end(),

                           tcg::bind2nd(&differentMesh, edges.front())) ==

              edges.end())

                 ? edges.front().m_meshIdx

                 : -1;

    }

    static bool testNoBoundaryEdge(const TTextureMesh &mesh,

                                   const edges_container &edges) {

      edges_container::const_iterator et, eEnd = edges.end();

      for (et = edges.begin(); et != eEnd; ++et)

        if (::borderEdge(mesh, et->m_idx)) return false;

      return true;

    }

    static bool buildVertexOccurrences(

        const TTextureMesh &mesh, const edges_container &edges,

        VertexOccurrencesMap &vertexOccurrences) {

      // Calculate vertex occurrences as edge endpoints

      edges_container::const_iterator et, eEnd = edges.end();

      for (et = edges.begin(); et != eEnd; ++et) {

        const edge_type &ed = mesh.edge(et->m_idx);

        int v0 = ed.vertex(0), v1 = ed.vertex(1);

        VertexOccurrence &vo0 = vertexOccurrences[v0],

                         &vo1 = vertexOccurrences[v1];

        if (vo0.m_count > 1 || vo1.m_count > 1) return false;

        vo0.m_adjacentEdgeIdx[vo0.m_count++] =

            vo1.m_adjacentEdgeIdx[vo1.m_count++] = et->m_idx;

      }

      return true;

    }

    static bool buildEdgeCuts(const TTextureMesh &mesh,

                              const edges_container &edges,

                              std::vector<edgecut> &edgeCuts) {</edgecut>

      VertexOccurrencesMap vertexOccurrences;

      if (!buildVertexOccurrences(mesh, edges, vertexOccurrences)) return false;

      // Build endpoints (exactly 2)

      int endPoints[2];

      int epCount = 0;

      VertexOccurrencesMap::iterator ot, oEnd = vertexOccurrences.end();

      for (ot = vertexOccurrences.begin(); ot != oEnd; ++ot) {

        if (ot->second.m_count == 1) {

          if (epCount > 1) return false;

          endPoints[epCount++] = ot->first;

        }

      }

      if (epCount != 2) return false;

      // Pick the first endpoint on the boundary, if any (otherwise, just pick

      // one)

      int *ept, *epEnd = endPoints + 2;

      ept = std::find_if(endPoints, epEnd, tcg::bind1st(&borderVertex, mesh));

      if (ept == epEnd) {

        // There is no boundary endpoint

        if (edges.size() < 2)  // We should not cut the mesh on a

          return false;        // single edge - no vertex to duplicate!

        ept = endPoints;

      }

      // Build the edge cuts list, expanding the edges selection from

      // the chosen endpoint

      edgeCuts.push_back(EdgeCut(  // Build the first EdgeCut separately

          *ept, vertexOccurrences[*ept].m_adjacentEdgeIdx[0]));

      int e, eCount = int(edges.size());  // Build the remaining ones

      for (e = 1; e != eCount; ++e) {

        const EdgeCut &lastCut = edgeCuts.back();

        int vIdx = mesh.edge(lastCut.m_eIdx).otherVertex(lastCut.m_vIdx);

        const int(&adjEdges)[2] = vertexOccurrences[vIdx].m_adjacentEdgeIdx;

        int eIdx = (adjEdges[0] == lastCut.m_eIdx) ? adjEdges[1] : adjEdges[0];

        edgeCuts.push_back(EdgeCut(vIdx, eIdx));

      }

      return true;

    }

  };

  const edges_container &edges = edgesSelection.objects();

  // Trivial early bailouts

  if (edges.empty()) return false;

  // Selected edges must lie on the same mesh

  meshIdx = locals::testSingleMesh(edges);

  if (meshIdx < 0) return false;

  const TTextureMesh &mesh = *mi.meshes()[meshIdx];

  // No selected edge must be on the boundary

  return (locals::testNoBoundaryEdge(mesh, edges) &&

          locals::buildEdgeCuts(mesh, edges, edgeCuts));

}

//------------------------------------------------------------------------

inline bool testCutMesh(const TMeshImage &mi,

                        const PlasticTool::MeshSelection &edgesSelection) {

  std::vector<edgecut> edgeCuts;</edgecut>

  int meshIdx;

  return buildEdgeCuts(mi, edgesSelection, meshIdx, edgeCuts);

}

//------------------------------------------------------------------------

void slitMesh(TTextureMesh &mesh,

              int e)  //! Opens a slit along the specified edge index.

{

  TTextureMesh::edge_type &ed = mesh.edge(e);

  assert(ed.facesCount() == 2);

  // Duplicate the edge and pass one face to the duplicate

  TTextureMesh::edge_type edDup(ed.vertex(0), ed.vertex(1));

  int f = ed.face(1);

  edDup.addFace(f);

  ed.eraseFace(ed.facesBegin() + 1);

  int eDup = mesh.addEdge(edDup);

  // Alter the face to host the duplicate

  TTextureMesh::face_type &fc = mesh.face(f);

  (fc.edge(0) == e)

      ? fc.setEdge(0, eDup)

      : (fc.edge(1) == e) ? fc.setEdge(1, eDup) : fc.setEdge(2, eDup);

}

//------------------------------------------------------------------------

/*!

  \brief    Duplicates a mesh edge-vertex pair (the 'cut') and separates their

            connections to adjacent mesh primitives.

  \remark   The starting vertex is supposed to be on the mesh boundary.

  \remark   Edges with a single neighbouring face can be duplicated, too.

*/

void cutEdge(TTextureMesh &mesh, const EdgeCut &edgeCut) {

  struct locals {

    static void transferEdge(TTextureMesh &mesh, int e, int vFrom, int vTo) {

      edge_type &ed = mesh.edge(e);

      vertex_type &vxFrom = mesh.vertex(vFrom), &vxTo = mesh.vertex(vTo);

      (ed.vertex(0) == vFrom) ? ed.setVertex(0, vTo) : ed.setVertex(1, vTo);

      vxTo.addEdge(e);

      vxFrom.eraseEdge(

          std::find(vxFrom.edges().begin(), vxFrom.edges().end(), e));

    }

    static void transferFace(TTextureMesh &mesh, int eFrom, int eTo) {

      edge_type &edFrom = mesh.edge(eFrom), &edTo = mesh.edge(eTo);

      int f = mesh.edge(eFrom).face(1);

      {

        face_type &fc = mesh.face(f);

        (fc.edge(0) == eFrom)

            ? fc.setEdge(0, eTo)

            : (fc.edge(1) == eFrom) ? fc.setEdge(1, eTo) : fc.setEdge(2, eTo);

        edTo.addFace(f);

        edFrom.eraseFace(edFrom.facesBegin() + 1);

      }

    }

  };  // locals

  int vOrig = edgeCut.m_vIdx, eOrig = edgeCut.m_eIdx;

  // Create a new vertex at the same position of the original

  int vDup = mesh.addVertex(vertex_type(mesh.vertex(vOrig).P()));

  int e = eOrig;

  if (mesh.edge(e).facesCount() == 2) {

    // Duplicate the cut edge

    e = mesh.addEdge(edge_type(vDup, mesh.edge(eOrig).otherVertex(vOrig)));

    // Transfer one face from the original to the duplicate

    locals::transferFace(mesh, eOrig, e);

  } else {

    // Transfer the original edge to the duplicate vertex

    locals::transferEdge(mesh, eOrig, vOrig, vDup);

  }

  // Edges adjacent to the original vertex that are also adjacent

  // to the transferred face above must be transferred too

  int f = mesh.edge(e).face(0);

  while (f >= 0) {

    // Retrieve the next edge to transfer

    int otherE = mesh.otherFaceEdge(f, mesh.edge(e).otherVertex(vDup));

    // NOTE: Not "mesh.edgeInciding(vOrig, mesh.otherFaceVertex(f, e))" in the

    // calculation

    //       of otherE. This is required since by transferring each edge at a

    //       time,

    //       we're 'breaking' faces up - f is adjacent to both vOrig AND vDup!

    //

    //       The chosen calculation, instead, just asks for the one edge which

    //       does

    //       not have a specific vertex in common to the 2 other edges in the

    //       face.

    locals::transferEdge(mesh, otherE, vOrig, vDup);

    // Update e and f

    e = otherE;

    f = mesh.edge(otherE).otherFace(f);

  }

}

//------------------------------------------------------------------------

}

namespace locals_ {      // Need to use a named namespace due to

                         // a known gcc 4.2 bug with compiler-generated

struct VertexesRecorder  // copy constructors.

{

  boost::unordered_set<int> &m_examinedVertexes;</int>

public:

  typedef boost::on_examine_vertex event_filter;

public:

  VertexesRecorder(boost::unordered_set<int> &examinedVertexes)</int>

      : m_examinedVertexes(examinedVertexes) {}

  void operator()(int v, const TTextureMesh &) { m_examinedVertexes.insert(v); }

};

}

namespace {  //

void splitUnconnectedMesh(TMeshImage &mi, int meshIdx) {

  struct locals {

    static void buildConnectedComponent(const TTextureMesh &mesh,

                                        boost::unordered_set<int> &vertexes) {</int>

      // Prepare BFS algorithm

      tcg::unique_ptr<uchar, tcg::freer=""> colorMapP(</uchar,>

          (UCHAR *)calloc(mesh.vertices().nodesCount(), sizeof(UCHAR)));

      locals_::VertexesRecorder vertexesRecorder(vertexes);

      std::stack<int> verticesQueue;</int>

      // Launch it

      boost::breadth_first_visit(

          mesh, int(mesh.vertices().begin().index()), verticesQueue,

          boost::make_bfs_visitor(vertexesRecorder), colorMapP.get());

    }

  };  // locals

  // Retrieve the list of vertexes in the first connected component

  TTextureMesh &origMesh = *mi.meshes()[meshIdx];

  boost::unordered_set<int> firstComponent;</int>

  locals::buildConnectedComponent(origMesh, firstComponent);

  if (firstComponent.size() == origMesh.verticesCount()) return;

  // There are (exactly) 2 connected components. Just duplicate the mesh

  // and keep/delete found vertexes.

  TTextureMeshP dupMeshPtr(new TTextureMesh(origMesh));

  TTextureMesh &dupMesh = *dupMeshPtr;

  TTextureMesh::vertices_container &vertices = origMesh.vertices();

  TTextureMesh::vertices_container::iterator vt, vEnd = vertices.end();

  for (vt = vertices.begin(); vt != vEnd;) {

    int v = int(vt.index());

    ++vt;

    if (firstComponent.count(v))

      dupMesh.removeVertex(v);

    else

      origMesh.removeVertex(v);

  }

  dupMesh.squeeze();

  origMesh.squeeze();

  mi.meshes().push_back(dupMeshPtr);

}

//------------------------------------------------------------------------

void splitMesh(TMeshImage &mi, int meshIdx, int lastBoundaryVertex) {

  // Retrieve a cutting edge with a single adjacent face - cutting that

  // will just duplicate the vertex and separate the mesh in 2 connected

  // components

  TTextureMesh &mesh = *mi.meshes()[meshIdx];

  int e;

  {

    const vertex_type &lbVx = mesh.vertex(lastBoundaryVertex);

    vertex_type::edges_const_iterator et = std::find_if(

        lbVx.edgesBegin(), lbVx.edgesEnd(), tcg::bind1st(&borderEdge, mesh));

    assert(et != lbVx.edgesEnd());

    e = *et;

  }

  cutEdge(mesh, EdgeCut(lastBoundaryVertex, e));

  // At this point, separate the 2 resulting connected components

  // in 2 separate meshes (if necessary)

  splitUnconnectedMesh(mi, meshIdx);

}

//------------------------------------------------------------------------

bool cutMesh(TMeshImage &mi, const PlasticTool::MeshSelection &edgesSelection) {

  struct locals {

    static int lastVertex(const TTextureMesh &mesh,

                          const std::vector<edgecut> &edgeCuts) {</edgecut>

      return mesh.edge(edgeCuts.back().m_eIdx)

          .otherVertex(edgeCuts.back().m_vIdx);

    }

    static int lastBoundaryVertex(const TTextureMesh &mesh,

                                  const std::vector<edgecut> &edgeCuts) {</edgecut>

      int v = lastVertex(mesh, edgeCuts);

      return ::borderVertex(mesh, v) ? v : -1;

    }

  };  // locals

  std::vector<edgecut> edgeCuts;</edgecut>

  int meshIdx;

  if (!::buildEdgeCuts(mi, edgesSelection, meshIdx, edgeCuts)) return false;

  TTextureMesh &mesh = *mi.meshes()[meshIdx];

  int lastBoundaryVertex = locals::lastBoundaryVertex(mesh, edgeCuts);

  // Slit the mesh on the first edge, in case the cuts do not start

  // on the mesh boundary

  std::vector<edgecut>::iterator ecBegin = edgeCuts.begin();</edgecut>

  if (!::borderVertex(mesh, ecBegin->m_vIdx)) {

    ::slitMesh(mesh, ecBegin->m_eIdx);

    ++ecBegin;

  }

  // Cut edges, in the order specified by edgeCuts

  std::for_each(ecBegin, edgeCuts.end(), tcg::bind1st(&cutEdge, mesh));

  // Finally, the mesh could have been split in 2 - we need to separate

  // the pieces if needed

  if (lastBoundaryVertex >= 0) splitMesh(mi, meshIdx, lastBoundaryVertex);

  return true;

}

}  // namespace

//****************************************************************************************

//    Undo  definitions

//****************************************************************************************

namespace {

class MoveVertexUndo_Mesh final : public TUndo {

  int m_row, m_col;  //!< Xsheet coordinates

  std::vector<meshindex> m_vIdxs;     //!< Moved vertices</meshindex>

  std::vector<tpointd> m_origVxsPos;  //!< Original vertex positions</tpointd>

  TPointD m_posShift;                 //!< Vertex positions shift

public:

  MoveVertexUndo_Mesh(const std::vector<meshindex> &vIdxs,</meshindex>

                      const std::vector<tpointd> &origVxsPos,</tpointd>

                      const TPointD &posShift)

      : m_row(::row())

      , m_col(::column())

      , m_vIdxs(vIdxs)

      , m_origVxsPos(origVxsPos)

      , m_posShift(posShift) {

    assert(m_vIdxs.size() == m_origVxsPos.size());

  }

  int getSize() const override {

    return int(sizeof(*this) +

               m_vIdxs.size() * (sizeof(int) + 2 * sizeof(TPointD)));

  }

  void redo() const override {

    PlasticTool::TemporaryActivation tempActivate(m_row, m_col);

    l_plasticTool.setMeshVertexesSelection(m_vIdxs);

    l_plasticTool.moveVertex_mesh(m_origVxsPos, m_posShift);

    l_plasticTool.invalidate();

    l_plasticTool

        .notifyImageChanged();  // IMPORTANT: In particular, sets the level's

  }                             //            dirty flag, so Toonz knows it has

                                //            to be saved!

  void undo() const override {

    PlasticTool::TemporaryActivation tempActivate(m_row, m_col);

    l_plasticTool.setMeshVertexesSelection(m_vIdxs);

    l_plasticTool.moveVertex_mesh(m_origVxsPos, TPointD());

    l_plasticTool.invalidate();

    l_plasticTool.notifyImageChanged();

  }

};

//==============================================================================

class SwapEdgeUndo final : public TUndo {

  int m_row, m_col;             //!< Xsheet coordinates

  mutable MeshIndex m_edgeIdx;  //!< Edge index

public:

  SwapEdgeUndo(const MeshIndex &edgeIdx)

      : m_row(::row()), m_col(::column()), m_edgeIdx(edgeIdx) {}

  int getSize() const override { return sizeof(*this); }

  void redo() const override {

    PlasticTool::TemporaryActivation tempActivate(m_row, m_col);

    const TMeshImageP &mi = TMeshImageP(TTool::getImage(true));

    assert(mi);

    // Perform swap

    TTextureMesh &mesh = *mi->meshes()[m_edgeIdx.m_meshIdx];

    m_edgeIdx.m_idx = mesh.swapEdge(m_edgeIdx.m_idx);

    assert(m_edgeIdx.m_idx >= 0);

    // Invalidate any deformer associated with mi

    PlasticDeformerStorage::instance()->releaseMeshData(mi.getPointer());

    // Update tool selection

    l_plasticTool.setMeshEdgesSelection(m_edgeIdx);

    l_plasticTool.invalidate();

    l_plasticTool.notifyImageChanged();

  }

  void undo() const override { redo(); }  // Operation is idempotent (indices

                                          // are perfectly restored, too)

};

//==============================================================================

class TTextureMeshUndo : public TUndo {

protected:

  int m_row, m_col;  //!< Xsheet coordinates

  int m_meshIdx;  //!< Mesh index in the image at stored xsheet coords

  mutable TTextureMesh m_origMesh;  //!< Copy of the original mesh

public:

  TTextureMeshUndo(int meshIdx)

      : m_row(::row()), m_col(::column()), m_meshIdx(meshIdx) {}

  // Let's say 1MB each - storing the mesh is costly

  int getSize() const override { return 1 << 20; }

  TMeshImageP getMeshImage() const {

    const TMeshImageP &mi = TMeshImageP(TTool::getImage(true));

    assert(mi);

    return mi;

  }

};

//==============================================================================

class CollapseEdgeUndo final : public TTextureMeshUndo {

  int m_eIdx;  //!< Collapsed edge index

public:

  CollapseEdgeUndo(const MeshIndex &edgeIdx)

      : TTextureMeshUndo(edgeIdx.m_meshIdx), m_eIdx(edgeIdx.m_idx) {}

  void redo() const override {

    PlasticTool::TemporaryActivation tempActivate(m_row, m_col);

    const TMeshImageP &mi = getMeshImage();

    // Store the original mesh

    TTextureMesh &mesh = *mi->meshes()[m_meshIdx];

    m_origMesh         = mesh;

    // Collapse

    mesh.collapseEdge(m_eIdx);

    mesh.squeeze();

    // Invalidate any cached deformer associated with the modified mesh image

    PlasticDeformerStorage::instance()->releaseMeshData(mi.getPointer());

    // Refresh the tool

    l_plasticTool.clearMeshSelections();

    l_plasticTool.invalidate();

    l_plasticTool.notifyImageChanged();

  }

  void undo() const override {

    PlasticTool::TemporaryActivation tempActivate(m_row, m_col);

    const TMeshImageP &mi = getMeshImage();

    // Restore the original mesh

    TTextureMesh &mesh = *mi->meshes()[m_meshIdx];

    mesh               = m_origMesh;

    PlasticDeformerStorage::instance()->releaseMeshData(mi.getPointer());

    // Restore selection

    l_plasticTool.setMeshEdgesSelection(MeshIndex(m_meshIdx, m_eIdx));

    l_plasticTool.invalidate();

    l_plasticTool.notifyImageChanged();

  }

};

//==============================================================================

class SplitEdgeUndo final : public TTextureMeshUndo {

  int m_eIdx;  //!< Split edge index

public:

  SplitEdgeUndo(const MeshIndex &edgeIdx)

      : TTextureMeshUndo(edgeIdx.m_meshIdx), m_eIdx(edgeIdx.m_idx) {}

  void redo() const override {

    PlasticTool::TemporaryActivation tempActivate(m_row, m_col);

    const TMeshImageP &mi = getMeshImage();

    // Store the original mesh

    TTextureMesh &mesh = *mi->meshes()[m_meshIdx];

    m_origMesh         = mesh;

    // Split

    mesh.splitEdge(m_eIdx);

    // mesh.squeeze();                                                     //

    // There should be no need to squeeze

    assert(mesh.vertices().size() == mesh.vertices().nodesCount());  //

    assert(mesh.edges().size() == mesh.edges().nodesCount());        //

    assert(mesh.faces().size() == mesh.faces().nodesCount());        //

    PlasticDeformerStorage::instance()->releaseMeshData(mi.getPointer());

    l_plasticTool.clearMeshSelections();

    l_plasticTool.invalidate();

    l_plasticTool.notifyImageChanged();

  }

  void undo() const override {

    PlasticTool::TemporaryActivation tempActivate(m_row, m_col);

    const TMeshImageP &mi = getMeshImage();

    // Restore the original mesh

    TTextureMesh &mesh = *mi->meshes()[m_meshIdx];

    mesh               = m_origMesh;

    PlasticDeformerStorage::instance()->releaseMeshData(mi.getPointer());

    // Restore selection

    l_plasticTool.setMeshEdgesSelection(MeshIndex(m_meshIdx, m_eIdx));

    l_plasticTool.invalidate();

    l_plasticTool.notifyImageChanged();

  }

};

//==============================================================================

class CutEdgesUndo final : public TUndo {

  int m_row, m_col;         //!< Xsheet coordinates

  TMeshImageP m_origImage;  //!< Clone of the original image

  PlasticTool::MeshSelection m_edgesSelection;  //!< Selection to operate on

public:

  CutEdgesUndo(const PlasticTool::MeshSelection &edgesSelection)

      : m_row(::row())

      , m_col(::column())

      , m_origImage(TTool::getImage(false)->cloneImage())

      , m_edgesSelection(edgesSelection) {}

  int getSize() const override { return 1 << 20; }

  bool do_() const {

    TMeshImageP mi = TTool::getImage(true);

    if (::cutMesh(*mi, m_edgesSelection)) {

      PlasticDeformerStorage::instance()->releaseMeshData(mi.getPointer());