#include "tcenterlinevectP.h"

//==========================================================================

//*********************************

//    Skeleton re-organization

//*********************************

//==========================================================================

//----------------------------------------

//    Skeleton re-organization Globals

//----------------------------------------

namespace {

VectorizerCoreGlobals *globals;

std::vector<unsigned int=""> contourFamilyOfOrganized;</unsigned>

JointSequenceGraph *currJSGraph;

ContourFamily *currContourFamily;

};

//==========================================================================

//--------------------------------------

//      Skeleton re-organization

//--------------------------------------

// EXPLANATION:  The raw skeleton data obtained from StraightSkeletonizer

// class need to be grouped in joints and sequences before proceding with

// conversion in quadratics - which works on single sequences.

// NOTE: Due to maxHeight, we have to assume that a single SkeletonGraph can

// hold

// more connected graphs at once.

// a) Isolate graph-like part of skeleton

// b) Retrieve remaining single sequences.

typedef std::map<uint, std::less<uint="" uint,="">> uintMap;</uint,>

// void organizeGraphs(SkeletonList* skeleton)

void organizeGraphs(SkeletonList *skeleton, VectorizerCoreGlobals &g) {

  globals = &g;

  SkeletonList::iterator currGraphPtr;

  Sequence currSequence;

  uintMap jointsMap;

  UINT i, j;

  UINT counter = 0;  // We also count current graph number, to associate

  // organized graphs to their contour family

  contourFamilyOfOrganized.clear();

  for (currGraphPtr = skeleton->begin(); currGraphPtr != skeleton->end();

       ++currGraphPtr) {

    SkeletonGraph &currGraph   = **currGraphPtr;

    currSequence.m_graphHolder = &currGraph;

    // Separate single Points - can happen only when a single node gets stored

    // in a SkeletonGraph.

    if (currGraph.getNodesCount() == 1) {

      globals->singlePoints.push_back(*currGraph.getNode(0));

      ++counter;

      continue;

    }

    // Discriminate between graphs, two-endpoint single sequences, and circular

    // ones

    bool has1DegreePoint = 0;

    for (i = 0; i < currGraph.getNodesCount(); ++i)

      if (currGraph.getNode(i).degree() != 2)

        if (currGraph.getNode(i).degree() == 1)

          has1DegreePoint = 1;

        else

          goto _graph;

    if (has1DegreePoint)

      goto _two_endpoint;

    else

      goto _circulars;

  _two_endpoint : {

    // Find head

    for (i = 0; currGraph.getNode(i).degree() != 1; ++i)

      ;

    currSequence.m_head     = i;

    currSequence.m_headLink = 0;

    // Find tail

    for (++i;

         i < currGraph.getNodesCount() && currGraph.getNode(i).degree() == 2;

         ++i)

      ;

    currSequence.m_tail     = i;

    currSequence.m_tailLink = 0;

    globals->singleSequences.push_back(currSequence);

    ++counter;

    continue;

  }

  _graph : {

    // Organize Graph-like part

    globals->organizedGraphs.push_back(JointSequenceGraph());

    JointSequenceGraph &JSGraph = globals->organizedGraphs.back();

    contourFamilyOfOrganized.push_back(counter);

    jointsMap.clear();

    // Gather all sequence extremities

    for (i = 0; i < currGraph.getNodesCount(); ++i) {

      if (currGraph.getNode(i).degree() != 2) {

        j = JSGraph.newNode(i);

        // Using a map to keep one-to-one relation between j and i

        jointsMap.insert(uintMap::value_type(i, j));

      }

    }

    // Extract Sequences

    for (i = 0; i < JSGraph.getNodesCount(); ++i) {

      UINT joint = *JSGraph.getNode(i);

      for (j = 0; j < currGraph.getNode(joint).getLinksCount(); ++j) {

        currSequence.m_head     = joint;

        currSequence.m_headLink = j;

        // Seek tail

        UINT oldNode  = joint,

             thisNode = currGraph.getNode(joint).getLink(j).getNext();

        while (currGraph.getNode(thisNode).degree() == 2) {

          currGraph.node(thisNode).setAttribute(

              ORGANIZEGRAPHS_SIGN);  // Sign thisNode as part of a JSGraph

          currSequence.advance(oldNode, thisNode);

        }

        currSequence.m_tail = thisNode;

        currSequence.m_tailLink =

            currGraph.getNode(thisNode).linkOfNode(oldNode);

        JSGraph.newLink(i, jointsMap.find(thisNode)->second, currSequence);

      }

    }

  }

  // NOTE: The following may seem uncommon - you must observe that, *WHEN

  // maxThickness

  //      more isolated sequence groups may arise in the SAME SkeletonGraph; so,

  //      an organized

  //      graph may contain different unconnected basic graph-structures.

  //      Further, remaining circular sequences may still exist. Therefore:

  // Proceed with remaining circulars extraction

  _circulars : {

    // Extract all circular sequences

    // Find a sequence point

    for (i = 0; i < currGraph.getNodesCount(); ++i) {

      if (!currGraph.getNode(i).hasAttribute(ORGANIZEGRAPHS_SIGN) &&

          currGraph.getNode(i).degree() == 2) {

        unsigned int curr = i, currLink = 0;

        currSequence.next(curr, currLink);

        for (; curr != i; currSequence.next(curr, currLink))

          currGraph.node(curr).setAttribute(ORGANIZEGRAPHS_SIGN);

        // Add sequence

        currSequence.m_head = currSequence.m_tail = i;

        currSequence.m_headLink                   = 0;

        currSequence.m_tailLink                   = 1;

        globals->singleSequences.push_back(currSequence);

      }

    }

  }

  }

}

//==========================================================================

//******************************

//       Junction Recovery

//******************************

// EXPLANATION: Junction recovery attempts to reshape skeleton junctions when

//  possible. The original polygons shape must not be exceedingly broken, and

//  no visible shape alteration must found.

// WARNING: Currently not working together with

// globals->currConfig->m_maxThickness

//--------------------------------------------------------------------------

//------------------

//    Globals

//------------------

namespace {

const double roadsMaxSlope = 0.3;

const double shapeDistMul  = 1;

const double hDiffMul      = 0.3;

const double lineDistMul   = 1;

const double pullBackMul   = 0.2;

}

//--------------------------------------------------------------------------

//-------------------------

//    Roads Extraction

//-------------------------

// SMALL ISSUE: The following is currently done for both side

// of a sequence...

inline void findRoads(const Sequence &s) {

  unsigned int curr, currLink, next;

  unsigned int roadStart, roadStartLink;

  double d, hMax, length;

  bool lowSlope, roadOn = 0;

  curr     = s.m_head;

  currLink = s.m_headLink;

  for (; curr != s.m_tail; s.next(curr, currLink)) {

    next = s.m_graphHolder->getNode(curr).getLink(currLink).getNext();

    d = planeDistance(*s.m_graphHolder->getNode(curr),

                      *s.m_graphHolder->getNode(next));

    lowSlope =

        fabs(s.m_graphHolder->getNode(curr).getLink(currLink)->getSlope()) <

                roadsMaxSlope

            ? 1

            : 0;

    // Entering event in a *possibile* road axis

    if (!roadOn && lowSlope) {

      length        = 0;

      hMax          = s.m_graphHolder->getNode(curr)->z;

      roadStart     = curr;

      roadStartLink = currLink;

    }

    // Exit event from a          """

    else if (roadOn && !lowSlope && (length > hMax))

      // Then sign ROAD the sequence from roadStart to curr.

      for (; roadStart != curr; s.next(roadStart, roadStartLink))

        s.m_graphHolder->node(roadStart)

            .link(roadStartLink)

            ->setAttribute(SkeletonArc::ROAD);

    // Now update vars

    if (lowSlope) {

      length += d;

      if (hMax < s.m_graphHolder->getNode(next)->z)

        hMax = s.m_graphHolder->getNode(next)->z;

    }

    roadOn = lowSlope;

  }

  // At sequence end, force an exit event

  if (roadOn && (length > hMax))

    for (; roadStart != curr; s.next(roadStart, roadStartLink))

      s.m_graphHolder->node(roadStart)

          .link(roadStartLink)

          ->setAttribute(SkeletonArc::ROAD);

}

//--------------------------------------------------------------------------

// Find the 'roads' of the current Graph.

static void findRoads(const JointSequenceGraph &JSGraph) {

  unsigned int i, j;

  // For all Sequence of currGraph, extract roads

  for (i = 0; i < JSGraph.getNodesCount(); ++i) {

    for (j = 0; j < JSGraph.getNode(i).getLinksCount(); ++j)

      // if(JSGraph.getNode(i).getLink(j)->isForward())

      findRoads(*JSGraph.getNode(i).getLink(j));

  }

}

//--------------------------------------------------------------------------

//----------------------------------

//    Junction Recovery Classes

//----------------------------------

// Entering point of a Sequence inside a Junction Area

class EnteringSequence final : public Sequence {

public:

  TPointD m_direction;  // In this case, we keep

  double m_height;      // separated (x,y) and z coords.

  // Also store indices toward the next (outer) joint

  unsigned int m_initialJoint;

  unsigned int m_outerLink;

  EnteringSequence() {}

  EnteringSequence(const Sequence &s) : Sequence(s) {}

};

//--------------------------------------------------------------------------

class JunctionArea {

public:

  std::vector<enteringsequence> m_enteringSequences;</enteringsequence>

  std::vector<unsigned int=""> m_jointsAbsorbed;</unsigned>

  TPointD m_newJointPosition;

  JunctionArea() {}

  // Initialize Junction Area

  void expandArea(unsigned int initial);

  // Calculate and evaluate area

  bool checkShape();

  bool solveJunctionPosition();

  bool makeHeights();

  bool calculateReconstruction();

  // Substitute area over old configuration

  bool sequencesPullBack();

  void apply();

};

//--------------------------------------------------------------------------

//----------------------------

//    Expansion Procedure

//----------------------------

// Junction Area expansion procedure

inline void JunctionArea::expandArea(unsigned int initial) {

  unsigned int a;

  unsigned int curr, currLink;

  unsigned int i, iLink, iNext;

  m_jointsAbsorbed.push_back(initial);

  currJSGraph->node(initial).setAttribute(

      JointSequenceGraph::REACHED);  // Nodes absorbed gets signed

  for (a = 0; a < m_jointsAbsorbed.size(); ++a) {

    // Extract a joint from vector

    curr = m_jointsAbsorbed[a];

    for (currLink = 0; currLink < currJSGraph->getNode(curr).getLinksCount();

         ++currLink) {

      Sequence &s = *currJSGraph->node(curr).link(currLink);

      if (s.m_graphHolder->getNode(s.m_head)

              .getLink(s.m_headLink)

              .getAccess()) {

        // Expand into all nearby sequences, until a ROAD is found

        i     = s.m_head;

        iLink = s.m_headLink;

        for (; i != s.m_tail &&

               !s.m_graphHolder->getNode(i).getLink(iLink)->hasAttribute(

                   SkeletonArc::ROAD);

             s.next(i, iLink))

          ;

        // If the sequence has been completely run, include next joint in the

        // expansion procedure AND sign it as 'REACHED'

        if (i == s.m_tail) {

          iNext = currJSGraph->getNode(curr).getLink(currLink).getNext();

          if (!currJSGraph->node(iNext).hasAttribute(

                  JointSequenceGraph::REACHED)) {

            currJSGraph->node(iNext).setAttribute(JointSequenceGraph::REACHED);

            m_jointsAbsorbed.push_back(iNext);

          }

          // Negate access to this sequence

          s.m_graphHolder->node(s.m_tail).link(s.m_tailLink).setAccess(0);

          s.m_graphHolder->node(s.m_head).link(s.m_headLink).setAccess(0);

        } else {

          // Initialize and copy the entering sequence found

          m_enteringSequences.push_back(EnteringSequence(s));

          m_enteringSequences.back().m_head     = i;

          m_enteringSequences.back().m_headLink = iLink;

          // Initialize entering directions

          iNext = s.m_graphHolder->getNode(i).getLink(iLink).getNext();

          m_enteringSequences.back().m_direction = planeProjection(

              *s.m_graphHolder->getNode(i) - *s.m_graphHolder->getNode(iNext));

          m_enteringSequences.back().m_direction =

              m_enteringSequences.back().m_direction *

              (1 / norm(m_enteringSequences.back().m_direction));

          // Initialize entering height / slope

          m_enteringSequences.back().m_height = s.m_graphHolder->getNode(i)->z;

          // Also store pointer to link toward the joint at the end of sequence

          m_enteringSequences.back().m_initialJoint = curr;

          m_enteringSequences.back().m_outerLink    = currLink;

        }

      }

    }

  }

}

//--------------------------------------------------------------------------

//-----------------------

//    Area Shape Test

//-----------------------

inline bool JunctionArea::checkShape() {

  std::vector<enteringsequence>::iterator a, b;</enteringsequence>

  unsigned int node, contour, first, last, n;

  TPointD A, A1, B, B1, P, P1;

  bool result = 1;

  // First, sign all outgoing arcs' m_leftGeneratingNode as end of

  // control procedure

  for (a = m_enteringSequences.begin(); a != m_enteringSequences.end(); ++a) {

    node = a->m_graphHolder->getNode(a->m_head)

               .getLink(a->m_headLink)

               ->getLeftGenerator();

    contour = a->m_graphHolder->getNode(a->m_head)

                  .getLink(a->m_headLink)

                  ->getLeftContour();

    (*currContourFamily)[contour][node].setAttribute(ContourNode::JR_RESERVED);

  }

  // Now, check shape

  for (a = m_enteringSequences.begin(), b = m_enteringSequences.end() - 1;

       a != m_enteringSequences.end(); b = a, ++a) {

    // Initialize contour check

    first = a->m_graphHolder->getNode(a->m_head)

                .getLink(a->m_headLink)

                ->getRightGenerator();

    // last= b->m_graphHolder->getNode(b->m_head).getLink(b->m_headLink)

    //  ->getLeftGenerator();

    contour = a->m_graphHolder->getNode(a->m_head)

                  .getLink(a->m_headLink)

                  ->getRightContour();

    n = (*currContourFamily)[contour].size();

    // Better this effective way to find the last

    unsigned int numChecked = 0;

    for (last = first; !(*currContourFamily)[contour][last].hasAttribute(

                           ContourNode::JR_RESERVED) &&

                       numChecked < n;

         last = (last + 1) % n, ++numChecked)

      ;

    // Security check

    if (numChecked == n) return 0;

    A  = planeProjection((*currContourFamily)[contour][first].m_position);

    A1 = planeProjection(

        (*currContourFamily)[contour][(first + 1) % n].m_position);

    B  = planeProjection((*currContourFamily)[contour][last].m_position);

    B1 = planeProjection(

        (*currContourFamily)[contour][(last + 1) % n].m_position);

    for (node = first; !(*currContourFamily)[contour][node].hasAttribute(

             ContourNode::JR_RESERVED);

         node = (node + 1) % n) {

      P  = planeProjection((*currContourFamily)[contour][node].m_position);

      P1 = planeProjection(

          (*currContourFamily)[contour][(node + 1) % n].m_position);

      // EXPLANATION:

      // Segment P-P1  must be included in fat lines passing for A-A1 or B-B1

      result &=

          (fabs(cross(P - A, normalize(A1 - A))) < a->m_height * shapeDistMul &&

           fabs(cross(P1 - A, normalize(A1 - A))) < a->m_height * shapeDistMul)

          ||

          (fabs(cross(P - B, normalize(B1 - B))) < b->m_height * shapeDistMul &&

           fabs(cross(P1 - B, normalize(B1 - B))) < b->m_height * shapeDistMul);

    }

  }

  // Finally, restore nodes attributes

  for (a = m_enteringSequences.begin(); a != m_enteringSequences.end(); ++a) {

    node = a->m_graphHolder->getNode(a->m_head)

               .getLink(a->m_headLink)

               ->getLeftGenerator();

    contour = a->m_graphHolder->getNode(a->m_head)

                  .getLink(a->m_headLink)

                  ->getLeftContour();

    (*currContourFamily)[contour][node].clearAttribute(

        ContourNode::JR_RESERVED);

  }

  return result;

}

//--------------------------------------------------------------------------

//--------------------------------------------

//    Solve new junction position problem

//--------------------------------------------

inline bool JunctionArea::solveJunctionPosition() {

  std::vector<enteringsequence>::iterator a;</enteringsequence>

  double Sx2 = 0, Sy2 = 0, Sxy = 0;

  TPointD P, v, b;

  double h;

  // Build preliminary sums for the linear system

  for (a = m_enteringSequences.begin(); a != m_enteringSequences.end(); ++a) {

    h = a->m_height;

    v = a->m_direction;

    P = planeProjection(*a->m_graphHolder->getNode(a->m_head));

    // Height-weighted problem

    Sx2 += sq(v.x) * h;

    Sy2 += sq(v.y) * h;

    Sxy += v.x * v.y * h;

    b.x += h * (sq(v.y) * P.x - (v.x * v.y * P.y));

    b.y += h * (sq(v.x) * P.y - (v.x * v.y * P.x));

  }

  // First check problem determinant

  double det = Sx2 * Sy2 - sq(Sxy);

  if (fabs(det) < 0.1) return 0;

  // Now construct linear system

  TAffine M(Sx2 / det, Sxy / det, 0, Sxy / det, Sy2 / det, 0);

  m_newJointPosition = M * b;

  // Finally, check if J is too far from the line extensions of the entering

  // sequences

  for (a = m_enteringSequences.begin(); a != m_enteringSequences.end(); ++a) {

    P = planeProjection(*a->m_graphHolder->getNode(a->m_head));

    if (tdistance(m_newJointPosition, a->m_direction, P) >

        a->m_height * lineDistMul)

      return 0;

  }

  return 1;

}

//--------------------------------------------------------------------------

//---------------------------------------

//    Calculate optimal joint heights

//---------------------------------------

// Globals

namespace {

const std::vector<enteringsequence> *currEnterings;</enteringsequence>

const std::vector<unsigned int=""> *heightIndicesPtr;</unsigned>

std::vector<double> *optHeights;</double>

double optMeanError;

double hMax;

}

//--------------------------------------------------------------------------

inline bool checkCircles(std::vector<double> &heights) {</double>

  unsigned int i, j;

  double cos, sin, frac;

  TPointD vi, vj;

  // Execute test on angle-consecutive EnteringSequences couples

  for (j = 0, i = currEnterings->size() - 1; j < currEnterings->size();

       i = j, ++j) {

    vi = (*currEnterings)[i].m_direction;

    vj = (*currEnterings)[j].m_direction;

    sin = cross(vi, vj);

    if (heights[i] == heights[j]) goto test_against_max_height;

    frac = heights[i] / heights[j];

    if (sin < 0) return 0;

    cos = vi * vj;

    if (cos < 0 && (frac < -cos || frac > (-1 / cos))) return 0;

  test_against_max_height:

    // Reusing cos

    cos = (sin < 0.1)

              ? std::max(heights[i], heights[j])

              : norm((vi * (heights[j] / sin)) + (vj * (heights[i] / sin)));

    if (cos < hMax) return 0;

  }

  return 1;

}

//--------------------------------------------------------------------------

inline void tryConfiguration(const std::vector<unsigned int=""> &bounds) {</unsigned>

  std::vector<double> currHeights(currEnterings->size());</double>

  double mean, currMeanError = 0;

  unsigned int i, j, first, end;

  for (i = 0, first = 0; i <= bounds.size(); first = end, ++i) {

    end = i < bounds.size() ? end = bounds[i] + 1 : currEnterings->size();

    // Calculate mean from first (included) to end (not included)

    for (j = first, mean = 0; j < end; ++j)

      mean += (*currEnterings)[(*heightIndicesPtr)[j]].m_height;

    mean /= end - first;

    // Check if the distance from extremities to mean is tolerable

    if (std::max((*currEnterings)[(*heightIndicesPtr)[end - 1]].m_height - mean,

                 mean - (*currEnterings)[(*heightIndicesPtr)[first]].m_height) >

        hDiffMul * mean)

      return;

    // Calculate squared error to mean

    for (j = first; j < end; ++j)

      currMeanError +=

          sq((*currEnterings)[(*heightIndicesPtr)[j]].m_height - mean);

    // Set calculated currHeights

    for (j = first; j < end; ++j) currHeights[(*heightIndicesPtr)[j]] = mean;

  }

  // Update current maximum height

  hMax = mean;  // Global

  // If this configuration could be better than current, launch circle test

  if (optHeights->empty() || currMeanError < optMeanError) {

    if (checkCircles(currHeights)) {

      (*optHeights) = currHeights;

      optMeanError  = currMeanError;

    }

  }

}

//--------------------------------------------------------------------------

class hLess {

public:

  std::vector<enteringsequence> &m_entSequences;</enteringsequence>

  hLess(std::vector<enteringsequence> &v) : m_entSequences(v) {}</enteringsequence>

  inline bool operator()(unsigned int a, unsigned int b) {

    return m_entSequences[a].m_height < m_entSequences[b].m_height;

  }

};

//--------------------------------------------------------------------------

// EXPLANATION: We build intervals on which height means are done.

// Their right Interval Bounds are supposed INCLUDED.

// Example: heights[]= {1, 2, 3, 4}; rightIntervalBounds[]={0, 2};

//  =>  do height means on: {1}, {2,3}, {4}. (*)

// After means are calculated, a test on the obtained configuration is

// performed. Among those configurations which pass the test, the one

// with rightIntervalBounds.size()->min and, on same sizes,

// currMeanError->min is the 'best' configuration possible.

// If no height configuration pass the test, reconstruction fails.

//(*) NOTE: The right Interval Bounds will never include index n-1, which

// interferes with push_backs.

inline bool JunctionArea::makeHeights() {

  std::vector<unsigned int=""> heightOrderedIndices;</unsigned>

  std::vector<unsigned int=""> rightIntervalBounds;</unsigned>

  std::vector<double> optimalHeights;</double>

  unsigned int i, n, m;

  // Sort entering sequences' indices for increasing height/thickness

  heightOrderedIndices.resize(m_enteringSequences.size());

  for (i = 0; i < m_enteringSequences.size(); ++i) heightOrderedIndices[i] = i;

  sort(heightOrderedIndices.begin(), heightOrderedIndices.end(),

       hLess(m_enteringSequences));

  // Initialize globals/references

  currEnterings    = &m_enteringSequences;

  heightIndicesPtr = &heightOrderedIndices;

  optMeanError = 0;

  optHeights   = &optimalHeights;

  // Now build height-mean configurations and launch their tests

  n = m_enteringSequences.size();

  // The m=0 case is done first, apart

  rightIntervalBounds.resize(0);

  tryConfiguration(rightIntervalBounds);

  for (m = 1; m < n && optimalHeights.empty(); ++m) {

    // Initialize bounds

    rightIntervalBounds.resize(1);

    rightIntervalBounds[0] = 0;

    while (!rightIntervalBounds.empty()) {

      // Fill bounds if necessary

      while (rightIntervalBounds.size() < m)

        rightIntervalBounds.push_back(rightIntervalBounds.back() + 1);

      tryConfiguration(rightIntervalBounds);

      //'Advance' configuration: increment last index and pop those

      // exceeding valid size. If bounds gets empty, done all configs

      // with m+1 intervals.

      while ((

          ++rightIntervalBounds.back(),

          rightIntervalBounds.back() < n - 1 - (m - rightIntervalBounds.size())

              ? 0

              : (rightIntervalBounds.pop_back(), !rightIntervalBounds.empty())))

        ;

    }

  }

  if (!optimalHeights.empty()) {

    for (i = 0; i < n; ++i) m_enteringSequences[i].m_height = optimalHeights[i];

    return 1;

  }

  return 0;

}

//==========================================================================

//------------------------------

//    Area Calculation Main

//------------------------------

class EntSequenceLess {

public:

  EntSequenceLess() {}

  inline bool operator()(const EnteringSequence &a, const EnteringSequence &b) {

    // m_direction is normalized, therefore:

    return a.m_direction.y >= 0

               ? b.m_direction.y >= 0 ? a.m_direction.x > b.m_direction.x : 1

               : b.m_direction.y < 0 ? a.m_direction.x < b.m_direction.x : 0;

  }

};

//--------------------------------------------------------------------------

bool JunctionArea::calculateReconstruction() {

  unsigned int i;

  if (m_enteringSequences.size() == 0) return 0;

  // Apply preliminary tests for this Junction Area

  // a) Check if endpoints got absorbed by the expansion process

  for (i = 0; i < m_jointsAbsorbed.size(); ++i)

    if (currJSGraph->getNode(m_jointsAbsorbed[i]).degree() == 1) return 0;

  // b) Check if the contours shape resembles that of a crossing

  sort(m_enteringSequences.begin(), m_enteringSequences.end(),

       EntSequenceLess());

  if (!checkShape()) return 0;

  // c) Build the new junction Point plane position

  if (!solveJunctionPosition()) return 0;

  // d) Build joint optimal heights (each for entering sequence...)

  if (!makeHeights()) return 0;

  return 1;

}

//==========================================================================

//---------------------------

//    Sequences Pull Back

//---------------------------

// EXPLANATION: We have to insure that connecting entering sequences to the

// new junction point happens *smoothly*. In order to do this, wh withdraw

// entering sequences along the enterin road, until the angle given by the

// connecting line and the entering direction is small.

// However, sequence pull back can be done only under some constraints:

//  * we have to remain inside a road axis

//  * ........................ a given fat line around the entering direction

inline bool JunctionArea::sequencesPullBack() {

  std::vector<enteringsequence>::iterator a;</enteringsequence>

  double alongLinePosition, distanceFromLine;

  unsigned int i, iLink, tail;

  TPointD P;

  for (a = m_enteringSequences.begin(); a != m_enteringSequences.end(); ++a) {

    i     = a->m_head;

    iLink = a->m_headLink;

    // NOTE: updated tails are stored this way, *DONT* look in a->m_tail

    // because these typically store old infos

    tail =

        currJSGraph->getNode(a->m_initialJoint).getLink(a->m_outerLink)->m_tail;

    P = planeProjection(*a->m_graphHolder->getNode(a->m_head));

    while (i != tail) {

      alongLinePosition = a->m_direction * (m_newJointPosition - P);

      distanceFromLine  = tdistance(m_newJointPosition, a->m_direction, P);

      if (alongLinePosition >= 0 &&

          (distanceFromLine / alongLinePosition) <= 0.5)

        goto found_pull_back;

      // We then take the next arc and check it

      if (!a->m_graphHolder->getNode(i).getLink(iLink)->hasAttribute(

              SkeletonArc::ROAD))

        return 0;  // Pull back failed

      a->next(i, iLink);

      P = planeProjection(*a->m_graphHolder->getNode(i));

      if (tdistance(P, a->m_direction, m_newJointPosition) >

          std::max(pullBackMul * a->m_height, 1.0))

        return 0;  // Pull back failed

    }

    // Now checking opposite sequence extremity

    if (alongLinePosition < 0 || (distanceFromLine / alongLinePosition) > 0.5)

      return 0;

  found_pull_back:

    a->m_head     = i;

    a->m_headLink = iLink;

  }

  return 1;

}

//--------------------------------------------------------------------------

//----------------------------------------------

//    Substitute new junction configuration

//----------------------------------------------

void JunctionArea::apply() {

  std::vector<enteringsequence>::iterator a;</enteringsequence>

  unsigned int newJoint, newSkeletonNode;

  unsigned int head, headLink, tail, tailLink;

  unsigned int outerJoint, outerLink;

  unsigned int i, next, nextLink;

  // First, check if Entering Sequences pullback is possible

  if (!sequencesPullBack()) return;

  // Then, we can substitute the old configuration

  // First, sign as 'ELIMINATED' all absorbed joints

  for (i = 0; i < m_jointsAbsorbed.size(); ++i)

    currJSGraph->node(m_jointsAbsorbed[i])

        .setAttribute(JointSequenceGraph::ELIMINATED);

  newJoint = currJSGraph->newNode();

  for (a = m_enteringSequences.begin(); a != m_enteringSequences.end(); ++a) {

    // Initialize infos

    newSkeletonNode =

        a->m_graphHolder->newNode(T3DPointD(m_newJointPosition, a->m_height));

    // Retrieve sequence infos to substitute

    // NOTE: We update *tail* infos in currJSGraph sequences after each "apply"

    const JointSequenceGraph::Link &tempLink =

        currJSGraph->getNode(a->m_initialJoint).getLink(a->m_outerLink);

    head     = tempLink->m_head;

    headLink = tempLink->m_headLink;

    tail     = tempLink->m_tail;

    tailLink = tempLink->m_tailLink;

    outerJoint = tempLink.getNext();

    // Find outerLink - from outerJoint to a->m_initialJoint

    for (i = 0;

         (currJSGraph->getNode(outerJoint).getLink(i)->m_tail != head) ||