#include "tcenterlinevectP.h"

// tcg includes

#include "tcg/tcg_numeric_ops.h"

// Boost includes

#include <boost container="" flat_map.hpp=""></boost>

namespace boost_c = boost::container;

//==========================================================================

//*************************

//*    Colors handling    *

//*************************

// Riassunto: Nel caso di normali raster, i tratti di penna sono colorati con

// l'elemento della palette data maggiormente tendente al nero.

// Per le Toonz colormap abilitiamo una gestione piu' complessa, che tiene

// conto del colore dell'inchiostro specificato direttamente nell'immagine.

// Nello specifico:

//  a) I tratti di penna vengono rilevati in base al valore del campo *tone*

//     di un TPixleCM32, non in base alla luminosita' del colore.

//     (vv. Poligonizzazione)

//  b) Sulle centerline grezze viene costruito un insieme di 'punti di assaggio'

//     dell'immagine; gli id di inchiostro rilevati vengono assegnati

//     direttamente alla stroke: se si verifica un cambio nell'id del colore,

//     il punto di cambio del colore viene identificato e la centerline viene

//     spezzata li'.

//  c) Una volta identificati i colori delle stroke, le si ordina *prima*

//     di inserirle nella vector image di output, in base al colore

//     dell'immagine

//     ai loro estremi (attualmente ordinamento solo parziale).

//--------------------------------------------------------------------------

static TPixelCM32 pixel(const TRasterCM32 &ras, int x, int y) {

  // Seems that raster access was not very much double-checked at the time

  // I wrote this. Too bad. Enforcing it now.

  return ras.pixels(tcrop(y, 0, ras.getLy() - 1))[tcrop(x, 0, ras.getLx() - 1)];

}

//--------------------------------------------------------------------------

static T3DPointD firstInkChangePosition(const TRasterCM32P &ras,

                                        const T3DPointD &start,

                                        const T3DPointD &end, int threshold) {

  double dist = norm(end - start);

  int sampleMax = tceil(dist), sampleCount = sampleMax + 1;

  double sampleMaxD = double(sampleMax);

  // Get first ink color

  int s, color = -1;

  for (s = 0; s != sampleCount; ++s) {

    T3DPointD p           = tcg::numeric_ops::lerp(start, end, s / sampleMaxD);

    const TPixelCM32 &pix = pixel(*ras, p.x, p.y);

    if (pix.getTone() < threshold) {

      color = pix.getInk();

      break;

    }

  }

  // Get second color

  for (; s != sampleCount; ++s) {

    T3DPointD p           = tcg::numeric_ops::lerp(start, end, s / sampleMaxD);

    const TPixelCM32 &pix = pixel(*ras, p.x, p.y);

    if (pix.getTone() < threshold && pix.getInk() != color) break;

  }

  // Return middle position between s-1 and s

  if (s < sampleCount)

    return tcg::numeric_ops::lerp(start, end, (s - 0.5) / sampleMaxD);

  return TConsts::nap3d;

}

//------------------------------------------------------------------------

// Find color of input sequence. Will be copied to its equivalent stroke.

// Currently in use only on colormaps

// Riassunto: Per saggiare il colore da assegnare alle strokes e' meglio

// controllare

// le sequenze *prima* di convertirle in TStroke (visto che si perde parte

// dell'aderenza originale

// al tratto). Si specifica un numero di 'punti di assaggio' della spezzata

// equidistanti tra loro,

// su cui viene prelevato il valore dell'ink del pixel corrispondente. Se si

// identifica un cambio

// di colore, viene lanciata la procedura di spezzamento della sequenza: si

// identifica il punto

// di spezzamento, e la sequenza s viene bloccata li'; si costruisce una nuova

// sequenza newSeq e

// viene rilanciata sampleColor(ras,newSeq,sOpposite). Le sequenze tra due punti

// di spezzamento

// vengono inserite nel vector 'globals->singleSequences'.

// Nel caso di sequenze circolari c'e' una piccola modifica: il primo punto di

// spezzamento

//*ridefinisce solo* il nodo-raccordo di s, senza introdurre nuove sequenze.

// La sequenza sOpposite, 'inversa' di s, rimane e diventa 'forward-oriented'

// previo aggiornamento

// della coda.

// Osservare che i nodi di spezzamento vengono inseriti con la signature

// 'SAMPLECOLOR_SIGN'.

// NOTA: La struttura a grafo J-S 'superiore' non viene alterata qui dentro.

// Eventualm. da fare fuori.

static void sampleColor(const TRasterCM32P &ras, int threshold, Sequence &seq,

                        Sequence &seqOpposite, SequenceList &singleSequences) {

  SkeletonGraph *currGraph = seq.m_graphHolder;

  // Calculate sequence parametrization

  std::vector<unsigned int=""> nodes;</unsigned>

  std::vector<double> params;</double>

  // Meanwhile, ensure each point belong to ras. Otherwise, typically an error

  // occurred in the thinning process and it's better avoid sampling procedure. 

  // Only exception, when a point has 

  // x==ras->getLx() || y==ras->getLy(); that is accepted.

  {

    const T3DPointD &headPos = *currGraph->getNode(seq.m_head);

    if (!ras->getBounds().contains(TPoint(headPos.x, headPos.y))) {

      if (headPos.x < 0 || ras->getLx() < headPos.x || headPos.y < 0 ||

          ras->getLy() < headPos.y)

        return;

    }

  }

  unsigned int curr, currLink, next;

  double meanThickness = currGraph->getNode(seq.m_head)->z;

  params.push_back(0);

  nodes.push_back(seq.m_head);

  for (curr = seq.m_head, currLink = seq.m_headLink;

       curr != seq.m_tail || params.size() == 1; seq.next(curr, currLink)) {

    next = currGraph->getNode(curr).getLink(currLink).getNext();

    const T3DPointD &nextPos = *currGraph->getNode(next);

    if (!ras->getBounds().contains(TPoint(nextPos.x, nextPos.y))) {

      if (nextPos.x < 0 || ras->getLx() < nextPos.x || nextPos.y < 0 ||

          ras->getLy() < nextPos.y)

        return;

    }

    double distance =

        tdistance(*currGraph->getNode(next), *currGraph->getNode(curr));

    if (distance == 0.0) continue;

    params.push_back(params.back() + distance);

    nodes.push_back(next);

    meanThickness += currGraph->getNode(next)->z;

  }

  meanThickness /= params.size();

  // Exclude 0-length sequences

  if (params.back() < 0.01) {

    seq.m_color = pixel(*ras, currGraph->getNode(seq.m_head)->x,

                        currGraph->getNode(seq.m_head)->y)

                      .getInk();

    return;

  }

  // Prepare sampling procedure

  int paramCount = params.size(), paramMax = paramCount - 1;

  int sampleMax   = std::max(params.back() / std::max(meanThickness, 1.0),

                           3.0),  // Number of color samples depends on

      sampleCount = sampleMax + 1;  // the ratio params.back() / meanThickness

  std::vector<double> sampleParams(sampleCount);  // Sampling lengths</double>

  std::vector<tpoint> samplePoints(</tpoint>

      sampleCount);  // Image points for color sampling

  std::vector<int> sampleSegments(</int>

      sampleCount);  // Sequence segment index for the above

  // Sample colors

  for (int s = 0, j = 0; s != sampleCount; ++s) {

    double samplePar = params.back() * (s / double(sampleMax));

    while (j != paramMax &&

           params[j + 1] < samplePar)  // params[j] < samplePar <= params[j+1]

      ++j;

    double t = (samplePar - params[j]) / (params[j + 1] - params[j]);

    T3DPointD samplePoint(*currGraph->getNode(nodes[j]) * (1 - t) +

                          *currGraph->getNode(nodes[j + 1]) * t);

    sampleParams[s] = samplePar;

    samplePoints[s] = TPoint(

        std::min(samplePoint.x,

                 double(ras->getLx() - 1)),  // This deals with sample points at

        std::min(samplePoint.y,

                 double(ras->getLy() - 1)));  // the top/right raster border

    sampleSegments[s] = j;

  }

  // NOTE: Extremities of a sequence are considered unreliable: they typically

  // happen to be junction points shared between possibly different-colored

  // strokes.

  // Find first and last extremity-free sampled points

  T3DPointD first(*currGraph->getNode(seq.m_head));

  T3DPointD last(*currGraph->getNode(seq.m_tail));

  int i, k;

  for (i = 1;

       params.back() * i / double(sampleMax) <= first.z && i < sampleCount; ++i)

    ;

  for (k = sampleMax - 1;

       params.back() * (sampleMax - k) / double(sampleMax) <= last.z && k >= 0;

       --k)

    ;

  // Give s the first sampled ink color found

  // Initialize with a last-resort reasonable color - not just 0

  seq.m_color = seqOpposite.m_color =

      ras->pixels(samplePoints[0].y)[samplePoints[0].x].getInk();

  int l;

  for (l = i - 1; l >= 0; --l) {

    if (ras->pixels(samplePoints[l].y)[samplePoints[l].x].getTone() <

        threshold) {

      seq.m_color = seqOpposite.m_color =

          ras->pixels(samplePoints[l].y)[samplePoints[l].x].getInk();

      break;

    }

  }

  // Then, look for the first reliable ink

  for (l = i; l <= k; ++l) {

    if (ras->pixels(samplePoints[l].y)[samplePoints[l].x].getTone() <

        threshold) {

      seq.m_color = seqOpposite.m_color =

          ras->pixels(samplePoints[l].y)[samplePoints[l].x].getInk();

      break;

    }

  }

  if (i >= k)

    goto _getOut;  // No admissible segment found for splitting

                   // check.

  // Find color changes between sampled colors

  for (l = i; l < k; ++l) {

    const TPixelCM32

        &nextSample = ras->pixels(samplePoints[l + 1].y)[samplePoints[l + 1].x],

        &nextSample2 = ras->pixels(

            samplePoints[l + 2]

                .y)[samplePoints[l + 2].x];  // l < k < sampleMax - so +2 is ok

    if (nextSample.getTone() < threshold &&

        nextSample.getInk() != seq.m_color &&

        nextSample2.getTone() < threshold &&

        nextSample2.getInk() ==

            nextSample.getInk())  // Ignore single-sample color changes

    {

      // Found a color change - apply splitting procedure

      // NOTE: The function RETURNS BEFORE THE FOR IS CONTINUED!

      int nextColor = nextSample.getInk();

      // Identify split segment

      int u;

      for (u = sampleSegments[l]; u < sampleSegments[l + 1]; ++u) {

        const TPixelCM32 &pix = pixel(*ras, currGraph->getNode(nodes[u + 1])->x,

                                      currGraph->getNode(nodes[u + 1])->y);

        if (pix.getTone() < threshold && pix.getInk() != seq.m_color) break;

      }

      // Now u indicates the splitting segment. Search for splitting point by

      // binary subdivision.

      const T3DPointD &nodeStartPos = *currGraph->getNode(nodes[u]),

                      &nodeEndPos   = *currGraph->getNode(nodes[u + 1]);

      T3DPointD splitPoint =

          firstInkChangePosition(ras, nodeStartPos, nodeEndPos, threshold);

      if (splitPoint == TConsts::nap3d)

        splitPoint = 0.5 * (nodeStartPos +

                            nodeEndPos);  // A color change was found, but could

                                          // not be precisely located. Just take

                                          // a reasonable representant.

      // Insert a corresponding new node in basic graph structure.

      unsigned int splitNode = currGraph->newNode(splitPoint);

      unsigned int nodesLink =

          currGraph->getNode(nodes[u]).linkOfNode(nodes[u + 1]);

      currGraph->insert(splitNode, nodes[u], nodesLink);

      *currGraph->node(splitNode).link(0) =

          *currGraph->getNode(nodes[u]).getLink(nodesLink);

      nodesLink = currGraph->getNode(nodes[u + 1]).linkOfNode(nodes[u]);

      currGraph->insert(splitNode, nodes[u + 1], nodesLink);

      *currGraph->node(splitNode).link(1) =

          *currGraph->getNode(nodes[u + 1]).getLink(nodesLink);

      currGraph->node(splitNode).setAttribute(

          SAMPLECOLOR_SIGN);  // Sign all split-inserted nodes

      if (seq.m_head == seq.m_tail &&

          currGraph->getNode(seq.m_head).getLinksCount() == 2 &&

          !currGraph->getNode(seq.m_head).hasAttribute(SAMPLECOLOR_SIGN)) {

        // Circular case: we update s to splitNode and relaunch this very

        // procedure on it.

        seq.m_head = seq.m_tail = splitNode;

        sampleColor(ras, threshold, seq, seqOpposite, singleSequences);

      } else {

        // Update upper (Joint-Sequence) graph data

        Sequence newSeq;

        newSeq.m_graphHolder = currGraph;

        newSeq.m_head        = splitNode;

        newSeq.m_headLink    = 0;

        newSeq.m_tail        = seq.m_tail;

        newSeq.m_tailLink    = seq.m_tailLink;

        seq.m_tail     = splitNode;

        seq.m_tailLink = 1;  // (link from splitNode to nodes[u] inserted for

                             // second by 'insert')

        seqOpposite.m_graphHolder =

            seq.m_graphHolder;  // Inform that a split was found

        // NOTE: access on s terminates at newSeq's push_back, due to possible

        // reallocation of globals->singleSequences

        if ((!(seq.m_head == newSeq.m_tail &&

               currGraph->getNode(seq.m_head).getLinksCount() == 2)) &&

            currGraph->getNode(seq.m_head).hasAttribute(SAMPLECOLOR_SIGN))

          singleSequences.push_back(seq);

        sampleColor(ras, threshold, newSeq, seqOpposite, singleSequences);

      }

      return;

    }

  }

_getOut:

  // Color changes not found (and therefore no newSeq got pushed back); if a

  // split happened, update sOpposite.

  if (currGraph->getNode(seq.m_head).hasAttribute(SAMPLECOLOR_SIGN)) {

    seqOpposite.m_color    = seq.m_color;

    seqOpposite.m_head     = seq.m_tail;

    seqOpposite.m_headLink = seq.m_tailLink;

    seqOpposite.m_tail     = seq.m_head;

    seqOpposite.m_tailLink = seq.m_headLink;

  }

}

//--------------------------------------------------------------------------

// Take samples of image colors to associate each sequence to its corresponding

// palette color. Currently working on colormaps.

// void calculateSequenceColors(const TRasterP &ras)

void calculateSequenceColors(const TRasterP &ras, VectorizerCoreGlobals &g) {

  int threshold                           = g.currConfig->m_threshold;

  SequenceList &singleSequences           = g.singleSequences;

  JointSequenceGraphList &organizedGraphs = g.organizedGraphs;

  TRasterCM32P cm = ras;

  unsigned int i, j, k;

  int l;

  if (cm && g.currConfig->m_maxThickness > 0.0) {

    // singleSequence is traversed back-to-front because new, possibly splitted

    // sequences are inserted at back - and don't have to be re-sampled.

    for (l = singleSequences.size() - 1; l >= 0; --l) {

      Sequence rear;

      sampleColor(ras, threshold, singleSequences[l], rear, singleSequences);

      // If rear is built, a split occurred and the rear of this

      // single sequence has to be pushed back.

      if (rear.m_graphHolder) singleSequences.push_back(rear);

    }

    for (i = 0; i < organizedGraphs.size(); ++i)

      for (j = 0; j < organizedGraphs[i].getNodesCount(); ++j)

        if (!organizedGraphs[i].getNode(j).hasAttribute(

                JointSequenceGraph::ELIMINATED))  // due to junction recovery

          for (k = 0; k < organizedGraphs[i].getNode(j).getLinksCount(); ++k) {

            Sequence &s = *organizedGraphs[i].node(j).link(k);

            if (s.isForward() &&

                !s.m_graphHolder->getNode(s.m_tail).hasAttribute(

                    SAMPLECOLOR_SIGN)) {

              unsigned int next = organizedGraphs[i].node(j).link(k).getNext();

              unsigned int nextLink = organizedGraphs[i].tailLinkOf(j, k);

              Sequence &sOpposite =

                  *organizedGraphs[i].node(next).link(nextLink);

              sampleColor(cm, threshold, s, sOpposite, singleSequences);

            }

          }

  }

}

//==========================================================================

inline void applyStrokeIndices(VectorizerCoreGlobals *globals) {

  unsigned int i, j, k, n;

  unsigned int next, nextLink;

  for (i = 0; i < globals->singleSequences.size(); ++i)

    globals->singleSequences[i].m_strokeIndex = i;

  n = i;

  for (i = 0; i < globals->organizedGraphs.size(); ++i) {

    JointSequenceGraph *currJSGraph = &globals->organizedGraphs[i];

    for (j = 0; j < currJSGraph->getNodesCount(); ++j)

      if (!currJSGraph->getNode(j).hasAttribute(JointSequenceGraph::ELIMINATED))

        for (k = 0; k < currJSGraph->getNode(j).getLinksCount(); ++k) {

          Sequence &s = *currJSGraph->node(j).link(k);

          if (s.isForward()) {

            s.m_strokeIndex = n;

            if (!s.m_graphHolder->getNode(s.m_tail).hasAttribute(

                    SAMPLECOLOR_SIGN)) {

              next     = currJSGraph->getNode(j).getLink(k).getNext();

              nextLink = currJSGraph->tailLinkOf(j, k);

              currJSGraph->node(next).link(nextLink)->m_strokeIndex = n;

            }

            ++n;

          }

        }

  }

}

//==========================================================================

// Riassunto: Dato un grafo superiore, possiamo associare ad ogni nodo il colore

// del pixel associato a quel punto; se una sequenza e' nascosta, ha entrambi

// i nodi agli estremi di colore diverso, viceversa per sequenze esposte.

// Data una sequenza, a partire dai nodi superiori adiacenti possiamo stabilire

// un

// insieme di sequenze che gli stanno sotto, ed uno di seq. che gli stanno

// sopra.

// NOTA: Questo problema e' un caso particolare di 'graph labeling', di cui non

// ho ancora trovato soluzione. In rete qualcosa si trova...

// La seguente funzione fa qualcosa di piu' debole: ad ogni joint ed ogni

// Sequence

// viene assegnata una altezza (intero). Dato un Joint, le sequenze che lo hanno

// per estremo e che hanno lo stesso colore dell'immagine in quella posizione

// hanno

// un'altezza +1 rispetto al giunto, e viceversa altezza -1. Partendo da

// un giunto iniziale, quest'informazione viene propagata sul grafo; il problema

// sta ritornando ai giunti gia' percorsi...

//--------------------------------------------------------------------------

// Find predominant ink color in a circle of given radius and center

static int getInkPredominance(const TRasterCM32P &ras, TPalette *palette, int x,

                              int y, int radius, int threshold) {

  int i, j;

  int mx, my, Mx, My;

  std::vector<int> inksFound(palette->getStyleCount());</int>

  radius = std::min(

      radius, 7);  // Restrict radius for a minimum significative neighbour

  mx = std::max(x - radius, 0);

  my = std::max(y - radius, 0);

  Mx = std::min(x + radius, ras->getLx() - 1);

  My = std::min(y + radius, ras->getLy() - 1);

  // Check square grid around (x,y)

  for (i = mx; i <= Mx; ++i)

    for (j = my; j <= My; ++j)

      if (sq(i) + sq(j) <= sq(radius) &&

          ras->pixels(j)[i].getTone() < threshold) {

        // Update color table

        inksFound[ras->pixels(j)[i].getInk()] +=

            255 - ras->pixels(j)[i].getTone();

      }

  // return the most found ink

  int maxCount = 0, mostFound = 0;

  for (i = 0; i < (int)inksFound.size(); ++i)

    if (inksFound[i] > maxCount) {

      maxCount  = inksFound[i];

      mostFound = i;

    }

  return mostFound;

}

//--------------------------------------------------------------------------

/*!

  \brief    Find the predominant color in sequences adjacent to the

            input graph node.

  \return   The predominant branch color if found, \p -1 otherwise.

*/

static int getBranchPredominance(const TRasterCM32P &ras, TPalette *palette,

                                 JointSequenceGraph::Node &node) {

  boost_c::flat_map<int, int=""> branchInksHistogram;</int,>

  UINT l, lCount = node.getLinksCount();

  for (l = 0; l != lCount; ++l) {

    int color = node.getLink(l)->m_color;

    if (color >= 0 && color <= palette->getStyleCount())

      ++branchInksHistogram[color];

  }

  // Return the most found ink, or -1 if a predominance color could not be found

  if (branchInksHistogram.empty()) return -1;

  typedef boost_c::flat_map<int, int="">::iterator histo_it;</int,>

  const std::pair<histo_it, histo_it=""> &histoRange = std::minmax_element(</histo_it,>

      branchInksHistogram.begin(), branchInksHistogram.end(),

      [](const std::pair<int, int=""> &a, const std::pair<int, int=""> &b) {</int,></int,>

        return a.second < b.second;

      });

  return (histoRange.first->second == histoRange.second->second)

             ? -1

             : histoRange.second->first;

}

//--------------------------------------------------------------------------

// NOTA: Da implementare una versione in grado di ordinare *pienamente* la

// vector image.

static void sortJS(JointSequenceGraph *js,

                   std::vector<std::pair<int, *="" tstroke="">> &toOrder,</std::pair<int,>

                   const TRasterCM32P &ras, TPalette *palette) {

  enum { SORTED = 0x10 };

  std::vector<std::pair<unsigned int="" int,="">> nodesToDo;</std::pair<unsigned>

  unsigned int currNodeIdx, nextNodeIdx;

  int currColor, currHeight, nextColor, nextHeight;

  T3DPointD pD;

  TPoint p;

  SkeletonGraph *currGraph = js->getNode(0).getLink(0)->m_graphHolder;

  unsigned int n, nCount = js->getNodesCount();

  for (n = 0; n != nCount; ++n) {

    // Get the first non-ELIMINATED and non-already treated JS node

    if (!js->getNode(n).hasAttribute(JointSequenceGraph::ELIMINATED | SORTED)) {

      nodesToDo.push_back(std::make_pair(n, 0));

      while (!nodesToDo.empty()) {

        currNodeIdx = nodesToDo.back().first;

        currHeight  = nodesToDo.back().second;

        nodesToDo.pop_back();

        JointSequenceGraph::Node &currNode = js->node(currNodeIdx);

        // Sign current node

        currNode.setAttribute(SORTED);

        // Initialize this node infos

        pD = *currGraph->getNode(currNode.getLink(0)->m_head);

        p  = TPoint(pD.x, pD.y);

        if (!ras->getBounds().contains(p)) continue;

        // currColor = getInkPredominance(ras, palette, p.x, p.y, (int) pD.z);

        // //ras->pixels(p.y)[p.x].getInk();

        currColor = getBranchPredominance(ras, palette, currNode);

        if (currColor < 0) currColor = ras->pixels(p.y)[p.x].getInk();

        int l, lCount = currNode.getLinksCount();

        for (l = 0; l != lCount; ++l) {

          nextNodeIdx = currNode.getLink(l).getNext();

          Sequence &s = *currNode.link(l);

          // Check if outgoing sequence has current color (front) or not (back)

          toOrder[s.m_strokeIndex].first =

              (s.m_color == currColor) ? currHeight : currHeight - 1;

          if (!(currNode.getLink(l).getAccess() == SORTED)) {

            // Deal with this unchecked branch

            // If sequence was not split (due to color change)

            if (!currGraph->getNode(s.m_tail).hasAttribute(SAMPLECOLOR_SIGN)) {

              JointSequenceGraph::Node &nextNode = js->node(nextNodeIdx);

              // Then check nextNode

              pD = *currGraph->getNode(nextNode.getLink(0)->m_head);

              p  = TPoint(pD.x, pD.y);

              if (!ras->getBounds().contains(p)) continue;

              // If nextNode was not already inserted in ToDo vector, do it now.

              if (!nextNode.hasAttribute(SORTED)) {

                // nextColor = getInkPredominance(ras, palette, p.x, p.y, (int)

                // pD.z);

                nextColor = getBranchPredominance(ras, palette, nextNode);

                if (nextColor < 0) nextColor = ras->pixels(p.y)[p.x].getInk();

                nextHeight = (s.m_color == nextColor)

                                 ? toOrder[s.m_strokeIndex].first

                                 : toOrder[s.m_strokeIndex].first + 1;

                nodesToDo.push_back(std::make_pair(nextNodeIdx, nextHeight));

              }

              // Deny access to its inverse (already processed now)

              nextNode.link(js->tailLinkOf(currNodeIdx, l)).setAccess(SORTED);

            }

          }

        }

      }

    }

  }

}

//--------------------------------------------------------------------------

inline void orderColoredStrokes(JointSequenceGraphList &organizedGraphs,

                                std::vector<tstroke *=""> &strokes,</tstroke>

                                const TRasterCM32P &ras, TPalette *palette) {

  // Initialize ordering

  std::vector<std::pair<int, *="" tstroke="">> strokesByHeight(</std::pair<int,>

      strokes.size(),

      std::make_pair(-(std::numeric_limits<int>::max)(), (TStroke *)0));</int>

  size_t s, sCount = strokes.size();

  for (s = 0; s != sCount; ++s) strokesByHeight[s].second = strokes[s];

  size_t og, ogCount = organizedGraphs.size();

  for (og = 0; og != ogCount; ++og)

    sortJS(&organizedGraphs[og], strokesByHeight, ras, palette);

  // Now, we have the order vector filled, apply sorting algorithm.

  std::sort(strokesByHeight.begin(), strokesByHeight.end());

  for (s = 0; s != sCount; ++s) strokes[s] = strokesByHeight[s].second;

}

//==========================================================================

// Take samples of image colors to associate each stroke to its corresponding

// palette color. Currently working on colormaps, closest-to-black strokes

// otherwise.

void applyStrokeColors(std::vector<tstroke *=""> &strokes, const TRasterP &ras,</tstroke>

                       TPalette *palette, VectorizerCoreGlobals &g) {

  JointSequenceGraphList &organizedGraphs = g.organizedGraphs;

  SequenceList &singleSequences           = g.singleSequences;

  TRasterCM32P cm = ras;

  unsigned int i, j, k, n;

  if (cm && g.currConfig->m_maxThickness > 0.0) {

    applyStrokeIndices(&g);

    // Treat single sequences before, like conversionToStrokes(..)

    for (i = 0; i < singleSequences.size(); ++i)

      strokes[i]->setStyle(singleSequences[i].m_color);

    // Then, treat remaining graph-strokes

    n = i;

    for (i = 0; i < organizedGraphs.size(); ++i)

      for (j = 0; j < organizedGraphs[i].getNodesCount(); ++j)

        if (!organizedGraphs[i].getNode(j).hasAttribute(

                JointSequenceGraph::ELIMINATED))  // due to junction recovery

          for (k = 0; k < organizedGraphs[i].getNode(j).getLinksCount(); ++k) {

            Sequence &s = *organizedGraphs[i].node(j).link(k);

            if (s.isForward()) {

              // vi->getStroke(n)->setStyle(s.m_color);

              strokes[n]->setStyle(s.m_color);

              ++n;

            }

          }

    // Order vector image according to actual color-coverings at junctions.

    orderColoredStrokes(organizedGraphs, strokes, cm, palette);

  } else {

    // Choose closest-to-black palette color

    int blackStyleId = palette->getClosestStyle(TPixel32::Black);

    unsigned int i;

    for (i = 0; i < strokes.size(); ++i) strokes[i]->setStyle(blackStyleId);

  }

}