\documentclass[a4paper,12pt]{article}

\usepackage[a4paper, total={180mm, 272mm}]{geometry}

\usepackage{fontspec}

\setmainfont[Path=fonts/, Extension=.ttf]{ipaexm}

\setlength\parindent{3.5em}

\setlength\parskip{0em}

\renewcommand{\baselinestretch}{1.247}

\begin{document}

\thispagestyle{empty}

\Large

\noindent \\

Level Master Ino\medskip

\par

\normalsize

Add correction to the level.\par

Please use \textquotedbl Level RGBA\textquotedbl \ when you want to correct the RGB separately.\\

\\

-{-}- \ Inputs \ -{-}-\\

Source\par

Connect the image to process.\\

Reference\par

Connect the reference image to put the strength of the effect into each Pixel.\\

\\

-{-}- \ Settings \ -{-}-\\

In\par

Specify the Min (Minimum) value and Max (Maximum) value of the input Pixel value.\par

Min value is less than the Min, Max value is greater than the Max limit.\par

Minimum value is 0, maximum value is 1.\par

The default values are, Min is 0, Max is 1.\par

Values can take an input of up to 4 decimal places.\\

\\

Out\par

Specify the range for \textquotedbl In\textquotedbl ,\par

Set to the range of Min (Minimum) value and Max (Maximum) value that you specify.\par

Minimum value is 0, maximum value is 1.\par

The default values are, Min is 0, Max is 1.\par

Values can take an input of up to 4 decimal places.\\

\\

Gamma\par

Used for the gamma correction between \textquotedbl Out Min\textquotedbl \ and \textquotedbl Out Max\textquotedbl .\par

A Value between 0.1 and 1.0, will make the image become darker.\par

It does not compensate when you specify a value of 1.0.\par

A value between 1.0 and 10.0, will make the image become brighter.\par

The default value is 1.\\

\\

Alpha Rendering\par

When ON it will also process the Alpha channel.\par

When OFF, it does not process the Alpha channel.\par

The default setting is ON.\\

\\

Premultiplied\par

When ON, RGB is already set to Premultiply\par

(The value of Alpha channel is multiplied in advance RGB channels)\par

and processes as an image.

\newpage

\thispagestyle{empty}

\ \vspace{-0.2em}

\par

At that time, and added to the Alpha processing, you may not get the correct image.\par

The default setting is ON.\\

\\

Reference\par

Choose how Reference image values put the strength of the effect into each Pixel.\par

An image is connected to the \textquotedbl Reference\textquotedbl \ of the input,\par

Choose from Red/Green/Blue/Alpha/Luminance/Nothing.\par

Choose Nothing when you do not want this effect, it will turn off the connection.\par

The default setting is Red.

\end{document}