\documentclass[a4paper,12pt]{article}

\usepackage[a4paper, total={180mm, 272mm}]{geometry}

\usepackage{fontspec}

\setmainfont[Path=fonts/, Extension=.ttf]{ipaexm}

\setlength\parindent{3.5em}

\setlength\parskip{0em}

\renewcommand{\baselinestretch}{1.247}

\usepackage{epic}

\usepackage{eepic}

\usepackage{xcolor}

\usepackage{graphicx}

\graphicspath{{images/}}

\begin{document}

\thispagestyle{empty}

\Large

\noindent \\

Motion Wind Ino\medskip

\par

\normalsize

Add the effect of wind flow lines to the picture\\

\par

For animation, it uses a fine arts drawing method to represent the reference to wind.\par

In the wake of the bright peak portion from the RGB value of the pixel,\par

you can add effects, such as flowing in color.\\

\\

-{-}- \ Inputs \ -{-}-\\

Source\par

Connect the image to process.\\

Reference\par

Connect the reference image to put the strength of the effect into each Pixel.\\

\\

-{-}- \ Settings \ -{-}-\\

Direction\par

Specify the direction of the flow line.\par

The only directions are above (Up) under (Down) left (Left) right (Right).\par

The default setting is right (Right).\par

Direction, is a fixed direction as viewed from the camera. For the slope of the image\par

it is not possible to tilt the direction by rotation or camera Z rotation etc.\par

of the image using (Geometry conversion),\par

please take note.\\

\\

Dark\par

When OFF it will be streamlined the bright parts of the image.\par

When ON it will be streamlined to the dark parts of the image.\par

The default setting is OFF.\\

\\

Alpha Rendering\par

This is a valid switch only when there is an Alpha channel.\par

When OFF, it masks the changes in the RGB values using the Alpha value.\par

When ON, the process is also applied to the Alpha.\par

The default setting is ON.\\

\\

Length Min\\

Length Max\par

Specify the length of the flow line.\par

The unit is millimeters.\par

Specify a value greater than or equal to 0. The maximum is 1000.\par

The following specified points, will have subtle changes in the length.\par

If you give a different values, the length between the values will change randomly.

\newpage

\thispagestyle{empty}

\ \vspace{-0.2em}

\par

With the same values, it will no longer use randomness and will be the same length.\par

The default values for Min (minimum value) is 0, and Max (maximum value) is 18.\par

-{-}> \textquotedbl Motion Wind Figure 1 \ \ Length Wind\textquotedbl \ reference\par

-{-}> \textquotedbl Motion Wind Figure 4 \ \ Force is 1 and Density is 1\textquotedbl \ reference\par

-{-}> \textquotedbl Motion Wind Figure 7 \ \ Length Wind and Force is 10\textquotedbl \ reference\\

\\

Length Bias\par

This changes the offset of the random pattern for the length.\par

Using a value between 0.1 and 1.0, will make it more short,\par

If you specify a value of 1.0 it will make the randomness become uniform,\par

Using a value between 1.0 and 10.0, increases the length to be longer.\par

Specify how you would like it to look.\par

The default value is 1.\par

-{-}> \textquotedbl Motion Wind Figure 1 \ \ Length Wind\textquotedbl \ reference\\

\\

Length Seed\par

This changes the random pattern for the length.\par

Specify an integer value greater than or equal to 0.\par

If you give the same value to the same image, it will reproduce the same pattern.\par

Change the value if you want a different pattern.\par

For example, in the Fix of the movie, when you want the pattern to change\par

streamlines, on a frame-by-frame basis, change the seed value.\par

The default value is set to 1.\\

\\

Force Min\\

Force Max\par

Specify the start momentum of the flow.\par

A value between 0.1 and 1.0, will immediately decay for a weak momentum,\par

If you specify a value of 1.0 it will be attenuated to linear momentum,\par

Between 1.0 and 10.0, will make a not quite attenuated strong momentum,\par

specify how you would like it to look.\par

If you give different values, momentum between the values will change randomly.\par

With the same values, it will no longer be random and will use the same momentum.\par

The default value is 1 for both.\par

-{-}> \textquotedbl Motion Wind Figure 2 \ \ Force Wind\textquotedbl \ reference\par

-{-}> \textquotedbl Motion Wind Figure 5 \ \ Force is 0.1\textquotedbl \ reference\par

-{-}> \textquotedbl Motion Wind Figure 7 \ \ Length Wind and Force is 10\textquotedbl \ reference\\

\\

Force Bias\par

This changes the offset of the random pattern for the momentum.\par

Using a value between 0.1 and 1.0, will make it become more weak,\par

if you specify a value of 1.0 it will make the randomness become uniform,

\newpage

\thispagestyle{empty}

\ \vspace{-0.2em}

\par

using a value between 1.0 and 10.0, will make it become more strong.\par

Specify how you would like it to look.\par

The default value is 1.\par

-{-}> \textquotedbl Motion Wind Figure 2 Force Wind\textquotedbl \ reference\\

\\

Force Seed\par

This changes the random pattern for the momentum.\par

The options are similar to \textquotedbl Length Seed\textquotedbl .\\

\\

Density Min\\

Density Max\par

Specify the concentration of the streamline.\par

There is no streamlined effect when the value is 0,\par

Using values between 1.0 and 0.0, will make it become thinner,\par

The reference concentration is a value of 1.0,\par

using a value greater than 1.0, will make it become darker. The maximum is 100.\par

If you give different values, concentration between the values will change randomly.\par

With the same values, it is no longer random and will use the same concentration.\par

The default value is 1 for both.\par

-{-}> \textquotedbl Motion Wind Figure 3 \ \ Density Wind\textquotedbl \ reference\par

-{-}> \textquotedbl Motion Wind Figure 6 \ \ Density is 0.2\textquotedbl \ reference\\

\\

Density Bias\par

This changes the offset of the random pattern for the concentration.\par

Using a value between 0.1 and 1.0, the concentration is increased,\par

if you specify a value of 1.0 it will make the randomness become uniform,\par

using a value of between 1.0 and 10.0, will make it become more dark.\par

The default value is 1.\par

-{-}> \textquotedbl Motion Wind Figure 3 \ \ Density Wind\textquotedbl \ reference\\

\\

Density Seed\par

This changes the random pattern of the concentration.\par

The options are similar to \textquotedbl Length Seed\textquotedbl .\\

\\

Rather than streamline, to use a uniform flow effect\par

\ \ \textquotedbl Length Min\textquotedbl \ and \textquotedbl Length Max\textquotedbl 、\par

\ \,\, \textquotedbl Force Min\textquotedbl \ and \ \, \textquotedbl Force Max\textquotedbl 、\par

\textquotedbl Density Min\textquotedbl \ and \textquotedbl Density Max\textquotedbl 、\par

and give the same values to each for the picture rather than streamline for the flow.\\

\\

To synchronize a random pattern\par

一 Using sheets,

\newpage

\thispagestyle{empty}

\ \vspace{-0.2em}

\par

\noindent \hskip 7.4em length\_random\_seed、\par

\noindent \hskip 8em force\_random\_seed、\par

\noindent \hskip 7em density\_random\_seed、\par

Using the same values, patterns will grow the same, with the same timing,\par

and weakening amounts.\par

It will break apart from the pattern when using different values.\\

\\

To secure a random pattern when the camera is moving\par

When on the background image, using camera movement, a random pattern\par

for each frame in accordance with the change of the picture will occur.\par

If you want to fix the pattern it must be multiplied by the processing\par

in the entire background image.\\

-{-}-{-}-{-}\\

Length Ref\par

When OFF it will not be referred to.\par

When ON, this refers to the image, and will give it a length.\par

Specifying the reference, will give the length to the Red channel of the image.\par

When not specified, it will give the length to the brightness of the image.\par

The darker the Pixel when the streamline begins, will make it become shorter.\par

The whole image tone is weakened, please adjust the length values\par

specified in (Min, Max).\par

The default setting is OFF.\\

\\

Force Ref\par

When OFF it will not be referred to.\par

When ON, the refers to the image, and will give it strength.\par

Specifying the reference, will give the strength to the Red channel of the image.\par

When not specified, it will give the strength to the brightness of the image.\par

The darker the Pixel when the streamline begins, will make it become weaker.\par

The whole image tone is weakened, please adjust the momentum values\par

specified in (Min, Max).\par

The default setting is OFF.\\

\\

Density Ref\par

When OFF it will not be referred to.\par

When ON, the refers to the image, and will give it light and dark shade.\par

Specifying the reference, will give the shade to the Red channel of the image.\par

When not specified, it will give the shade to the brightness of the image.\par

The darker the Pixel when the streamline begins, will make it become thinner.\par

The whole image tone is weakened, please adjust the concentration values\par

specified in (Min, Max).\par

The default setting is OFF.

\newpage

\thispagestyle{empty}

\ \vspace{1.3em}

\par

\noindent Reference\par

Choose how Reference image values put the strength of the effect into each Pixel.\par

An image is connected to the \textquotedbl Reference\textquotedbl \ of the input,\par

Choose from Red/Green/Blue/Alpha/Luminance/Nothing.\par

Choose Nothing when you do not want this effect, it will turn off the connection.\par

The default setting is Red.

\newpage

\thispagestyle{empty}

\ \vspace{-0.2em}

\par

\noindent Motion Wind Figure 1 \ \ Length Wind

\large

\noindent \begin{picture}(0,0)

\linethickness{0.01em}

\put(1,-198.5){\line(1,0){198}}

\put(9,-200.5){\line(0,1){62}}

\drawline[0](9,-143)(193,-198.5)

\drawline[0](9,-143)(102,-198.5)

\drawline[0](9,-143)(28,-198.5)

\put(0.5,-135){\includegraphics[width=13.9em]{MotionWindInoFunction1LengthWindA}}

\put(142,-171.5){\includegraphics[width=13.9em]{MotionWindInoFunction1LengthWindB}}

\put(284.5,-200){\includegraphics[width=13.9em]{MotionWindInoFunction1LengthWindC}}

\put(209,-16.5){\normalsize{Bias is 0.1}}

\put(351,-45){\normalsize{Bias is 10}}

\end{picture}\\[12.6em]

\normalsize

\noindent Motion Wind Figure 2 \ \ Force Wind

\large

\noindent \begin{picture}(0,0)

\linethickness{0.01em}

\put(1,-198.5){\line(1,0){198}}

\put(9,-200.5){\line(0,1){62}}

\drawline[0](9,-143)(193,-198.5)

\spline(9,-143)(129,-150)(188,-180)(195,-198.5)

\spline(9,-143)(20,-168.5)(85,-192.5)(193,-198.5)

\put(0.5,-135){\includegraphics[width=13.9em]{MotionWindInoFunction2MotionWindA}}

\put(142,-171.5){\includegraphics[width=13.9em]{MotionWindInoFunction2MotionWindB}}

\put(284.5,-200){\includegraphics[width=13.9em]{MotionWindInoFunction2MotionWindC}}

\put(209,-16.5){\normalsize{Bias is 0.1}}

\put(351,-45){\normalsize{Bias is 10}}

\end{picture}\\[12.65em]

\normalsize

\noindent Motion Wind Figure 3 \ \ Density Wind

\large

\noindent \begin{picture}(0,0)

\linethickness{0.01em}

\put(1,-198.5){\line(1,0){198}}

\put(9,-200.5){\line(0,1){62}}

\drawline[0](9,-143)(193,-198.5)

\drawline[0](9,-166.5)(193,-198.5)

\drawline[0](9,-192)(193,-198.5)

\put(0.5,-135){\includegraphics[width=13.9em]{MotionWindInoFunction3DensityWindA}}

\put(142,-171.5){\includegraphics[width=13.9em]{MotionWindInoFunction3DensityWindB}}

\put(284.5,-200){\includegraphics[width=13.9em]{MotionWindInoFunction3DensityWindC}}

\put(209,-16.5){\normalsize{Bias is 0.1}}

\put(351,-45){\normalsize{Bias is 10}}

\end{picture}

\newpage

\thispagestyle{empty}

\ \vspace{-0.1em}

\par

\large

\noindent \hskip 10.5em Length Min equal Max Wind\\[-0.15em]

\normalsize

Motion Wind Figure 4 \ \ Force is 1 and Density is 1

\large

\noindent \begin{picture}(0,0)

\put(28.5,-132){\includegraphics[width=13.9em]{MotionWindInoFunction4}}

\end{picture}\\[7.6em]

\large

\noindent \hskip 10.5em Length Min equal Max Wind\\[-0.15em]

\normalsize

Motion Wind Figure 5 \ \ Force is 0.1

\large

\noindent \begin{picture}(0,0)

\put(28.5,-132){\includegraphics[width=13.9em]{MotionWindInoFunction5}}

\end{picture}\\[7.6em]

\large

\noindent \hskip 10.5em Length Min equal Max Wind\\[-0.15em]

\normalsize

Motion Wind Figure 6 \ \ Density is 0.2

\large

\noindent \begin{picture}(0,0)

\put(28.5,-132){\includegraphics[width=13.9em]{MotionWindInoFunction6}}

\end{picture}\\[7.4em]

\normalsize

\noindent Motion Wind Figure 7 \ \ Length Wind and Force is 10

\large

\noindent \begin{picture}(0,0)

\put(28.5,-132){\includegraphics[width=13.9em]{MotionWindInoFunction7}}

\end{picture}

\end{document}