<ts language="zh_CN" version="2.1"></ts>

<context></context>

    <name>CenterlineVectorizer</name>

    <message></message>

        <source>Can't vectorize a %1 level

        <translation type="vanished">无法矢量化层级 %1</translation>

    <message></message>

        <source>Can't vectorize a level with no frames

        <translation type="vanished">无法矢量化没有帧的层级</translation>

    <message></message>

        <source>Can't vectorize a %1 image

        <translation type="vanished">无法矢量化图像 %1</translation>

    <message></message>

        <source>Bad argument (%1): should be an Image or a Level

        <translation type="vanished">不正确的参数(%1): 应该是图像或者层级</translation>

<context></context>

    <name>FilePath</name>

    <message></message>

        <source>"%1"

        <translation type="vanished">"%1"</translation>

    <message></message>

        <source>can't concatenate an absolute path : %1

        <translation type="vanished">无法连接绝对路径: %1</translation>

    <message></message>

        <source>%1 is not a directory

        <translation type="vanished">%1 不是目录</translation>

    <message></message>

        <source>can't read directory %1

        <translation type="vanished">无法读取目录 %1</translation>

<context></context>

    <name>Image</name>

    <message></message>

        <source>File %1 doesn't exist

        <translation type="vanished">文件 %1 不存在</translation>

    <message></message>

        <source>Loaded first frame of %1

        <translation type="vanished">%1 的第一帧已经加载</translation>

    <message></message>

        <source>Unexpected error while reading image

        <translation type="vanished">读取图像时发生了意想不到的错误</translation>

    <message></message>

        <source>Unrecognized file type :

        <translation type="vanished">未识别的文件类型:</translation>

    <message></message>

        <source>Can't save a %1 image to this file type : %2

        <translation type="vanished">无法将图像 %1 保存为该文件类型: %2</translation>

    <message></message>

        <source>Unexpected error while writing image

        <translation type="vanished">写入图像时发生了意想不到的错误</translation>

<context></context>

    <name>ImageBuilder</name>

    <message></message>

        <source>Bad argument (%1): should be 'Raster' or ToonzRaster'

        <translation type="vanished">不正确的参数(%1): 应当是“光栅”或者“Toonz 光栅”</translation>

    <message></message>

        <source>ImageBuilder(%1 image)

        <translation type="vanished">图像生成器(%1 图像)</translation>

    <message></message>

        <source>%1 : %2

        <translation type="vanished">%1 : %2</translation>

    <message></message>

        <source>Bad argument (%1): should be a Transformation

        <translation type="vanished">不正确的参数(%1): 应当是几何变换</translation>

<context></context>

    <name>Level</name>

    <message></message>

        <source>%1 frames

        <translation type="vanished">%1 帧</translation>

    <message></message>

        <source>Bad argument (%1). It should be FilePath or string

        <translation type="vanished">不正确的参数(%1): 应当是文件路径或者字符串</translation>

    <message></message>

        <source>Exception loading level (%1)

        <translation type="vanished">加载层级时的异常(%1)</translation>

    <message></message>

        <source>File %1 doesn't exist

        <translation type="vanished">文件 %1 不存在</translation>

    <message></message>

        <source>File %1 is unsupported

        <translation type="vanished">文件 %1 是不支持的</translation>

    <message></message>

        <source>Exception reading %1

        <translation type="vanished">读取 %1 时的异常</translation>

    <message></message>

        <source>Can't save an empty level

        <translation type="vanished">无法保存空层级</translation>

    <message></message>

        <source>Unrecognized file type :

        <translation type="vanished">未识别的文件类型:</translation>

    <message></message>

        <source>Can't save a %1 level to this file type : %2

        <translation type="vanished">不能保存层级 %1 为此文件类型：%2</translation>

    <message></message>

        <source>Exception writing %1

        <translation type="vanished">写入 %1 时的异常</translation>

    <message></message>

        <source>frame index (%1) must be a number

        <translation type="vanished">帧索引(%1)必须是个数字</translation>

    <message></message>

        <source>frame index (%1) is out of range (0-%2)

        <translation type="vanished">帧索引(%1)超出范围(0-%2)</translation>

    <message></message>

        <source>second argument (%1) is not an image

        <translation type="vanished">第二个参数(%1)不是图像</translation>

    <message></message>

        <source>can not insert a %1 image into a level

        <translation type="vanished">无法插入图像 %1 到层级中</translation>

    <message></message>

        <source>can not insert a %1 image to a %2 level

        <translation type="vanished">无法插入图像 %1 到层级 %2 中</translation>

<context></context>

    <name>OutlineVectorizer</name>

    <message></message>

        <source>Can't vectorize a %1 level

        <translation type="vanished">无法矢量化层级 %1</translation>

    <message></message>

        <source>Can't vectorize a level with no frames

        <translation type="vanished">无法矢量化没有帧的层级</translation>

    <message></message>

        <source>Can't vectorize a %1 image

        <translation type="vanished">无法矢量化图像 %1</translation>

    <message></message>

        <source>Bad argument (%1): should be an Image or a Level

        <translation type="vanished">不正确的参数(%1): 应该是图像或者层级</translation>

    <message></message>

        <source>Invalid color : 

        <translation type="vanished">无效的颜色: </translation>

<context></context>

    <name>Preferences</name>

    <message></message>

        <source>Retas Level Format

        <translation>RETAS 层级格式</translation>

    <message></message>

        <source>Adobe Photoshop

        <translation></translation>

    <message></message>

        <source>PNG

        <translation></translation>

<context></context>

    <name>QObject</name>

    <message></message>

        <source>No restrictions for uncompressed avi video

        <translation>不限制未压缩的 AVI 视频</translation>

    <message></message>

        <source>video width must be a multiple of %1

        <translation>视频宽度必须是 %1 的倍数</translation>

    <message></message>

        <source>video length must be a multiple of %1

        <translation>视频长度必须是 %1 的倍数</translation>

    <message></message>

        <source>No restrictions for this codec

        <translation>该编码不受限制</translation>

    <message></message>

        <source>Resolution restrictions:

        <translation>分辨率限制:</translation>

    <message></message>

        <source>It is not possible to communicate with the codec.

 Probably the codec cannot work correctly.

        <translation>无法调用编码器。</translation>

可能该编码器不能正常工作。

    <message></message>

        <source>%1-%2

        <translation>%1-%2</translation>

    <message></message>

        <source>%1

        <translation>%1</translation>

    <message></message>

        <source>Expected %1 argument(s) in %2, got %3

        <translation>在 %2 中期待 %1 参数，实际有 %3</translation>

    <message></message>

        <source>%1 is not a valid color (valid color names are 'red', 'transparent', '#FF8800', ecc.)

        <translation>%1 不是有效的颜色(有效的颜色名是类似“red”、“transparent”和“#FF8800”等等)</translation>

    <message></message>

        <source>Vectorization failed

        <translation>矢量化失败</translation>

    <message></message>

        <source>Argument doesn't look like a file path : %1

        <translation>参数不像是文件路径: %1</translation>

    <message></message>

        <source>Bad argument (%1): should be an Image (not empty)

        <translation>不正确的参数(%1): 必须指定图像(不能为空)</translation>

    <message></message>

        <source>Argument '%1' does not look like a FrameId

        <translation>参数 '%1'不像是帧 ID</translation>

    <message></message>

        <source>First argument must be a scene : %1

        <translation>第一个参数必须是场景: %1</translation>

    <message></message>

        <source>Can't render empty scene

        <translation>不能渲染空场景</translation>

    <message></message>

        <source>New Camera  %1

        <translation>新摄影机  %1</translation>

    <message></message>

        <source>New Pegbar  %1

        <translation>新定位尺  %1</translation>

    <message></message>

        <source>Set Active Camera  %1 > %2

        <translation>设置启用的摄影机  %1 > %2</translation>

    <message></message>

        <source>Remove Spline  %1

        <translation>删除样条线  %1</translation>

    <message></message>

        <source>New Motion Path  %1

        <translation>新建运动路径  %1</translation>

    <message></message>

        <source>Link Motion Path  %1 > %2

        <translation>链接运动路径  %1 > %2</translation>

    <message></message>

        <source>Remove Object  %1

        <translation>删除物体  %1</translation>

    <message></message>

        <source>Remove Column  

        <translation>删除列  </translation>

    <message></message>

        <source>Load into Current Palette  > %1

        <translation>加载到当前调色板  > %1</translation>

    <message></message>

        <source>Replace with Current Palette  > %1

        <translation>用当前调色板替换  > %1</translation>

    <message></message>

        <source>Delete Studio Palette  : %1

        <translation>删除工作室调色板  : %1</translation>

    <message></message>

        <source>Create Studio Palette  : %1

        <translation>创建工作室调色板  : %1</translation>

    <message></message>

        <source>Delete Studio Palette Folder  : %1

        <translation>删除工作室调色板文件夹  : %1</translation>

    <message></message>

        <source>Create Studio Palette Folder  : %1

        <translation>创建工作室调色板文件夹  : %1</translation>

    <message></message>

        <source>Move Studio Palette Folder  : %1 : %2 > %3

        <translation>移动工作室调色板文件夹  : %1 : %2 > %3</translation>

    <message></message>

        <source>Arrange Styles  in Palette %1

        <translation>在调色板 %1 中排列样式</translation>

    <message></message>

        <source>Create Style#%1  in Palette %2

        <translation>在调色板 %2 中创建样式#%1</translation>

    <message></message>

        <source>Add Style  to Palette %1

        <translation>添加样式到调色板 %1</translation>

    <message></message>

        <source>Add Page %1 to Palette %2

        <translation>添加页 %1 到调色板 %2</translation>

    <message></message>

        <source>Delete Page %1 from Palette %2

        <translation>从调色板 %2 中删除页 %1</translation>

    <message></message>

        <source>Load Color Model %1  to Palette %2

        <translation>加载色彩模型 %1 到调色板 %2</translation>

    <message></message>

        <source>Move Page

        <translation>移动页</translation>

    <message></message>

        <source>Rename Page  %1 > %2

        <translation>重命名页  %1 > %2</translation>

    <message></message>

        <source>Rename Style#%1 in Palette%2  : %3 > %4

        <translation>重命名调色板 %2 的样式#%1  : %3 > %4</translation>

    <message></message>

        <source>Add Fx  : 

        <translation>添加特效  : </translation>

    <message></message>

        <source>Insert Fx  : 

        <translation>插入特效  : </translation>

    <message></message>

        <source>Create Linked Fx  : %1

        <translation>创建已链接的特效  : %1</translation>

    <message></message>

        <source>Replace Fx  : 

        <translation>替换特效  : </translation>

    <message></message>

        <source>Unlink Fx  : %1 - - %2

        <translation>取消特效链接  : %1 - - %2</translation>

    <message></message>

        <source>Make Macro Fx  : %1

        <translation>制作宏特效  : %1</translation>

    <message></message>

        <source>Explode Macro Fx  : %1

        <translation>展开宏特效  : %1</translation>

    <message></message>

        <source>Create Output Fx

        <translation>创建输出特效</translation>

    <message></message>

        <source>Connect to Xsheet  : 

        <translation>连接到摄影表  : </translation>

    <message></message>

        <source>Disconnect from Xsheet  : 

        <translation>断开摄影表的连接 : </translation>

    <message></message>

        <source>Delete Link

        <translation>删除链接</translation>

    <message></message>

        <source>Delete Fx Node : %1

        <translation>删除特效节点 : %1</translation>

    <message></message>

        <source>Paste Fx  :  

        <translation>粘贴特效  :  </translation>

    <message></message>

        <source>Disconnect Fx

        <translation>断开特效的连接</translation>

    <message></message>

        <source>Connect Fx : %1 - %2

        <translation>连接特效 : %1 - %2</translation>

    <message></message>

        <source>Rename Fx : %1 > %2

        <translation>重命名特效 : %1 > %2</translation>

    <message></message>

        <source>Group Fx

        <translation>组合特效</translation>

    <message></message>

        <source>Ungroup Fx

        <translation>解组特效</translation>

    <message></message>

        <source>Rename Group  : %1 > %2

        <translation>重命名组  : %1 > %2</translation>

    <message></message>

        <source>Set Keyframe

        <translation>设置关键帧</translation>

    <message></message>

        <source>Remove Keyframe

        <translation>移除关键帧</translation>

    <message></message>

        <source>Cycle

        <translation>循环</translation>

    <message></message>

        <source>The autocentering failed on the current drawing.

        <translation>在当前绘图上的自动定位中心点失败。</translation>

    <message></message>

        <source>Move

        <translation>移动</translation>

    <message></message>

        <source>Edit Rotation

        <translation>编辑旋转</translation>

    <message></message>

        <source>Move E/W

        <translation>左右移动</translation>

    <message></message>

        <source>Move N/S

        <translation>上下移动</translation>

    <message></message>

        <source>Move Z

        <translation>移动 Z 轴</translation>

    <message></message>

        <source>Edit Stack Order

        <translation>编辑堆栈顺序</translation>

    <message></message>

        <source>Edit Scale W

        <translation>编辑横向缩放</translation>

    <message></message>

        <source>Edit Scale H

        <translation>编辑纵向缩放</translation>

    <message></message>

        <source>Edit Scale

        <translation>编辑缩放</translation>

    <message></message>

        <source>Edit PosPath

        <translation>编辑位置路径</translation>

    <message></message>

        <source>Edit Shear X

        <translation>编辑横向切变</translation>

    <message></message>

        <source>Edit Shear Y

        <translation>编辑纵向切变</translation>

    <message></message>

        <source>%1  %2  Frame : %3

        <translation>%1  %2  帧 : %3</translation>

    <message></message>

        <source>Set Keyframe   %1 at frame %2

        <translation>设置关键帧   %1  在帧 %2</translation>

    <message></message>

        <source>Remove Keyframe   %1 at frame %2

        <translation>移除关键帧   %1  在帧 %2</translation>

    <message></message>

        <source>Move Center   %1  Frame %2

        <translation>移动中心   %1  帧 %2</translation>

    <message></message>

        <source>color model

        <translation>色彩模型</translation>

    <message></message>

        <source>Set Picked Position of Style#%1 in Palette%2 : %3,%4

        <translation>设定已经在调色板%2 : %3,%4中挑选的样式#%1位置</translation>

    <message></message>

        <source>Update Colors by Using Picked Positions in Palette %1

        <translation>使用在调色板%1中已经挑选的位置更新颜色</translation>

    <message></message>

        <source>Can't save

        <translation>没法保存</translation>

    <message></message>

        <source>None

        <translation>无</translation>

    <message></message>

        <source>Red

        <translation>红</translation>

    <message></message>

        <source>Green

        <translation>绿</translation>

    <message></message>

        <source>Blue

        <translation>蓝</translation>

    <message></message>

        <source>DarkYellow

        <translation>暗黄</translation>

    <message></message>

        <source>DarkCyan

        <translation>暗青</translation>

    <message></message>

        <source>DarkMagenta

        <translation>暗红</translation>

    <message></message>

        <source>Brightness

        <translation>亮度</translation>

    <message></message>

        <source>Contrast

        <translation>对比度</translation>

    <message></message>

        <source>ColorThres

        <translation>彩色阀值</translation>

    <message></message>

        <source>WhiteThres

        <translation>白色阀值</translation>

    <message></message>

        <source>HRange

        <translation>H范围</translation>

    <message></message>

        <source>Line Width

        <translation>线条宽度</translation>

    <message></message>

        <source>Toggle Autopaint Option  Palette : %1  Style#%2

        <translation>开关自动填充选项  调色板: %1  样式#%2</translation>

    <message></message>

        <source>Can't undo rename palette

        <translation>不能取消重命名调色板</translation>

    <message></message>

        <source>Can't undo move palette

        <translation>不能取消移动调色板</translation>

    <message></message>

        <source>Can't redo rename palette

        <translation>不能取消重命名调色板</translation>

    <message></message>

        <source>Can't redo move palette

        <translation>不能重做移动调色板</translation>

    <message></message>

        <source>Rename Studio Palette : %1 > %2

        <translation>重命名工作室调色板  %1 > %2</translation>

    <message></message>

        <source>Xsheet

        <translation>摄影表</translation>

    <message></message>

        <source>Timeline

        <translation>时间轴</translation>

    <message></message>

        <source>Failed to save the following resources:

        <translation>保存下面的资源失败:</translation>

<context></context>

    <name>Rasterizer</name>

    <message></message>

        <source>Expected a vector image: %1

        <translation type="vanished">预期的矢量图像: %1</translation>

    <message></message>

        <source>Expected a vector level: %1

        <translation type="vanished">预期的矢量层级: %1</translation>

    <message></message>

        <source>Argument must be a vector level or image : 

        <translation type="vanished">参数必须是矢量层级或图像: </translation>

    <message></message>

        <source>%1 has no palette

        <translation type="vanished">%1 没有调色板</translation>

<context></context>

    <name>Scene</name>

    <message></message>

        <source>File %1 doesn't exist

        <translation type="vanished">文件 %1 不存在</translation>

    <message></message>

        <source>Exception reading %1

        <translation type="vanished">读取 %1 时的异常</translation>

    <message></message>

        <source>Exception writing %1

        <translation type="vanished">写入 %1 时的异常</translation>

    <message></message>

        <source>Bad level type (%1): must be Vector,Raster or ToonzRaster

        <translation type="vanished">不正确的层级类型(%1): 必须是矢量、光栅或者 Toonz 光栅</translation>

    <message></message>

        <source>Can't add the level: name(%1) is already used

        <translation type="vanished">无法添加层级: 名称(%1)已被使用</translation>

    <message></message>

        <source>Can't load this kind of file as a level : %1

        <translation type="vanished">无法加载此类文件作为层级: %1</translation>

    <message></message>

        <source>Could not load level %1

        <translation type="vanished">无法加载层级 %1</translation>

    <message></message>

        <source>Level is not included in the scene : %1

        <translation type="vanished">层级未包含在此场景: %1</translation>

    <message></message>

        <source>%1 : Expected a Level instance or a level name

        <translation type="vanished">%1: 预期的层级矢量或者层级名</translation>

    <message></message>

        <source>Level '%1' is not included in the scene

        <translation type="vanished">层级 '%1' 没有在这个场景中</translation>

<context></context>

    <name>TScriptBinding::CenterlineVectorizer</name>

    <message></message>

        <source>Can't vectorize a %1 level

        <translation>无法矢量化层级 %1</translation>

    <message></message>

        <source>Can't vectorize a level with no frames

        <translation>无法矢量化没有帧的层级</translation>

    <message></message>

        <source>Can't vectorize a %1 image

        <translation>无法矢量化图像 %1</translation>

    <message></message>

        <source>Bad argument (%1): should be an Image or a Level

        <translation>不正确的参数(%1): 应当是一个图像或层级</translation>

<context></context>

    <name>TScriptBinding::FilePath</name>

    <message></message>

        <source>"%1"

        <translation>"%1"</translation>

    <message></message>

        <source>can't concatenate an absolute path : %1

        <translation>无法连接绝对路径: %1</translation>

    <message></message>

        <source>%1 is not a directory

        <translation>%1 不是目录</translation>

    <message></message>

        <source>can't read directory %1

        <translation>无法读取目录 %1</translation>

<context></context>

    <name>TScriptBinding::Image</name>

    <message></message>

        <source>File %1 doesn't exist

        <translation>文件 %1 不存在</translation>

    <message></message>

        <source>Loaded first frame of %1

        <translation>%1 的第一帧已经加载</translation>

    <message></message>

        <source>Unexpected error while reading image

        <translation>读取图像时发生了意想不到的错误</translation>

    <message></message>

        <source>Unrecognized file type :

        <translation>无法识别的文件类型: </translation>

    <message></message>

        <source>Can't save a %1 image to this file type : %2

        <translation>无法将图像 %1 保存为该文件类型: %2</translation>

    <message></message>

        <source>Unexpected error while writing image

        <translation>写入图像时发生了意想不到的错误</translation>

<context></context>

    <name>TScriptBinding::ImageBuilder</name>

    <message></message>

        <source>Bad argument (%1): should be 'Raster' or ToonzRaster'

        <translation>不正确的参数(%1): 应当是“光栅”或者“Toonz 光栅”</translation>

    <message></message>

        <source>ImageBuilder(%1 image)

        <translation>图像生成器(%1 图像)</translation>

    <message></message>

        <source>%1 : %2

        <translation>%1 : %2</translation>

    <message></message>

        <source>Bad argument (%1): should be a Transformation

        <translation>不正确的参数(%1): 应当是几何变换</translation>

<context></context>

    <name>TScriptBinding::Level</name>

    <message></message>

        <source>%1 frames

        <translation>%1 帧</translation>

    <message></message>

        <source>Bad argument (%1). It should be FilePath or string

        <translation>不正确的参数(%1): 应当是文件路径或者字符串</translation>

    <message></message>

        <source>Exception loading level (%1)

        <translation>加载层级时的异常(%1)</translation>

    <message></message>

        <source>File %1 doesn't exist

        <translation>文件 %1 不存在</translation>

    <message></message>

        <source>File %1 is unsupported

        <translation>文件 %1 是不支持的</translation>

    <message></message>

        <source>Exception reading %1

        <translation>读取 %1 时的异常</translation>

    <message></message>

        <source>Can't save an empty level

        <translation>无法保存空层级</translation>

    <message></message>

        <source>Unrecognized file type :

        <translation>无法识别的文件类型:</translation>

    <message></message>

        <source>Can't save a %1 level to this file type : %2

        <translation>不能保存层级 %1 为此文件类型：%2</translation>

    <message></message>

        <source>Exception writing %1

        <translation>写入 %1 时的异常</translation>

    <message></message>

        <source>frame index (%1) must be a number

        <translation>帧索引(%1)必须是个数字</translation>

    <message></message>

        <source>frame index (%1) is out of range (0-%2)

        <translation>帧索引(%1)超出范围(0-%2)</translation>

    <message></message>

        <source>second argument (%1) is not an image

        <translation>第二个参数(%1)不是图像</translation>

    <message></message>

        <source>can not insert a %1 image into a level

        <translation>无法插入图像 %1 到层级中</translation>

    <message></message>

        <source>can not insert a %1 image to a %2 level

        <translation>无法插入图像 %1 到层级 %2 中</translation>

<context></context>

    <name>TScriptBinding::OutlineVectorizer</name>

    <message></message>

        <source>Can't vectorize a %1 level

        <translation>无法矢量化层级 %1</translation>

    <message></message>

        <source>Can't vectorize a level with no frames

        <translation>无法矢量化没有帧的层级</translation>

    <message></message>

        <source>Can't vectorize a %1 image

        <translation>无法矢量化图像 %1</translation>

    <message></message>

        <source>Bad argument (%1): should be an Image or a Level

        <translation>不正确的参数(%1): 应当是图像或者层级</translation>

    <message></message>

        <source>Invalid color : 

        <translation>无效的颜色: </translation>

<context></context>

    <name>TScriptBinding::Rasterizer</name>

    <message></message>

        <source>Expected a vector image: %1

        <translation>预期的矢量图像: %1</translation>

    <message></message>

        <source>Expected a vector level: %1

        <translation>预期的矢量层级: %1</translation>

    <message></message>

        <source>Argument must be a vector level or image : 

        <translation>参数必须是矢量层级或图像: </translation>

    <message></message>

        <source>%1 has no palette

        <translation>%1 没有调色板</translation>

<context></context>

    <name>TScriptBinding::Scene</name>

    <message></message>

        <source>File %1 doesn't exist

        <translation>文件 %1 不存在</translation>

    <message></message>

        <source>Exception reading %1

        <translation>读取 %1 时的异常</translation>

    <message></message>

        <source>Exception writing %1