<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.1" language="zh_CN">
<context>
    <name>AddFilmstripFramesPopup</name>
    <message>
        <source>Add Frames</source>
        <translation>添加帧</translation>
    </message>
    <message>
        <source>From Frame:</source>
        <translation>开始帧:</translation>
    </message>
    <message>
        <source>To Frame:</source>
        <translation>结束帧:</translation>
    </message>
    <message>
        <source>Step:</source>
        <translation>步长:</translation>
    </message>
    <message>
        <source>Add</source>
        <translation>添加</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
</context>
<context>
    <name>AdjustLevelsPopup</name>
    <message>
        <source>Adjust Levels</source>
        <translatorcomment>level 多数是专有名词，但此处为颜色阶调，非Toonz的专有名词</translatorcomment>
        <translation>调整色阶</translation>
    </message>
    <message>
        <source>Clamp</source>
        <translation>夹紧</translation>
    </message>
    <message>
        <source>Auto</source>
        <translation>自动</translation>
    </message>
    <message>
        <source>Reset</source>
        <translation>重置</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>应用</translation>
    </message>
</context>
<context>
    <name>AdjustThicknessPopup</name>
    <message>
        <source>Adjust Thickness</source>
        <translation>调整粗细</translation>
    </message>
    <message>
        <source>Mode:</source>
        <translation>模式:</translation>
    </message>
    <message>
        <source>Scale Thickness</source>
        <translation>缩放粗细</translation>
    </message>
    <message>
        <source>Add Thickness</source>
        <translation>增减粗细</translation>
    </message>
    <message>
        <source>Constant Thickness</source>
        <translation>固定粗细</translation>
    </message>
    <message>
        <source>Start:</source>
        <translation>开始:</translation>
    </message>
    <message>
        <source>End:</source>
        <translation>结束:</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>应用</translation>
    </message>
</context>
<context>
    <name>AntialiasPopup</name>
    <message>
        <source>Apply Antialias</source>
        <translation>应用消除锯齿</translation>
    </message>
    <message>
        <source>Threshold:</source>
        <translation>阈值:</translation>
    </message>
    <message>
        <source>Softness:</source>
        <translation>柔和度:</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>应用</translation>
    </message>
</context>
<context>
    <name>ApplyMatchlinesCommand</name>
    <message>
        <source>It is not possible to apply the match lines because no column was selected.</source>
        <translation>无法应用适配线，因为没有列被选中。</translation>
    </message>
    <message>
        <source>It is not possible to apply the match lines because two columns have to be selected.</source>
        <translation>无法应用适配线，因为有两列同时被选中。</translation>
    </message>
</context>
<context>
    <name>AudioRecordingPopup</name>
    <message>
        <source>Audio Recording</source>
        <translation>音频录制</translation>
    </message>
    <message>
        <source>Save and Insert</source>
        <translation>保存并插入</translation>
    </message>
    <message>
        <source>Sync with XSheet</source>
        <translation>同步摄影表</translation>
    </message>
    <message>
        <source> </source>
        <translation></translation>
    </message>
    <message>
        <source>The microphone is not available:
Please select a different device or check the microphone.</source>
        <translation>麦克风不可用:
请选择不同的设备或者检查您的麦克风。</translation>
    </message>
    <message>
        <source>The microphone is not available: 
Please select a different device or check the microphone.</source>
        <translation>麦克风不可用: 
请选择其他设备或者检查该麦克风。</translation>
    </message>
</context>
<context>
    <name>AutoInputCellNumberPopup</name>
    <message>
        <source>Auto Input Cell Number</source>
        <translation>自动输入帧格编号</translation>
    </message>
    <message>
        <source>Overwrite</source>
        <translation>覆盖</translation>
    </message>
    <message>
        <source>Insert</source>
        <translation>插入</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Setting this value 0 will automatically 
pick up all frames in the selected level.</source>
        <translation>设置此值为0将自动选上
所选中层级里的所有帧。</translation>
    </message>
    <message>
        <source>From frame</source>
        <translation>起始帧</translation>
    </message>
    <message>
        <source> </source>
        <comment>from frame</comment>
        <translation></translation>
    </message>
    <message>
        <source>with</source>
        <translation type="unfinished">加入</translation>
    </message>
    <message>
        <source>frames increment</source>
        <translation>增加的帧</translation>
    </message>
    <message>
        <source>To frame</source>
        <translation>结束帧</translation>
    </message>
    <message>
        <source> </source>
        <comment>to frame</comment>
        <translation></translation>
    </message>
    <message>
        <source>inserting</source>
        <translation>插入</translation>
    </message>
    <message>
        <source>empty cell intervals</source>
        <translation>空帧格的间隔</translation>
    </message>
    <message>
        <source>cell steps</source>
        <translation>帧格步长</translation>
    </message>
    <message>
        <source>Repeat</source>
        <translation>重复</translation>
    </message>
    <message>
        <source>times</source>
        <translation>次数</translation>
    </message>
    <message>
        <source>No available cells or columns are selected.</source>
        <translation>无有效帧格或者列被选中。</translation>
    </message>
    <message>
        <source>Selected level has no frames between From and To.</source>
        <translation>选中的层级在起始和终点之间没有帧。</translation>
    </message>
</context>
<context>
    <name>AutocenterPopup</name>
    <message>
        <source>Autocenter</source>
        <translation>自动定位中心</translation>
    </message>
    <message>
        <source>Pegbar Holes:</source>
        <translation>定位尺孔:</translation>
    </message>
    <message>
        <source>Field Guide:</source>
        <translation>规格板:</translation>
    </message>
</context>
<context>
    <name>BatchServersViewer</name>
    <message>
        <source>Process with:</source>
        <translation>处理位置:</translation>
    </message>
    <message>
        <source>Local</source>
        <translation>本地</translation>
    </message>
    <message>
        <source>Render Farm</source>
        <translation>渲染农场</translation>
    </message>
    <message>
        <source>Name:</source>
        <translation>名称:</translation>
    </message>
    <message>
        <source>IP Address:</source>
        <translation>IP 地址:</translation>
    </message>
    <message>
        <source>Port Number:</source>
        <translation>端口号:</translation>
    </message>
    <message>
        <source>Tasks:</source>
        <translation>任务:</translation>
    </message>
    <message>
        <source>State:</source>
        <translation>状态:</translation>
    </message>
    <message>
        <source>Number of CPU:</source>
        <translation>CUP 数:</translation>
    </message>
    <message>
        <source>Physical Memory:</source>
        <translation>物理内存:</translation>
    </message>
    <message>
        <source>Farm Global Root:</source>
        <translation>农场的全局根:</translation>
    </message>
    <message>
        <source>In order to use the render farm you have to define the Farm Global Root first.</source>
        <translation>要使用 Toonz 渲染农场，您要指定渲染农场的全局根路径。</translation>
    </message>
    <message>
        <source>The Farm Global Root folder doesn&apos;t exist
Please create this folder before using the render farm.</source>
        <translation>Toonz 渲染农场的全局根文件夹不存在。
请在使用 Toonz 渲染农场之前创建该文件夹。</translation>
    </message>
    <message>
        <source>Unable to connect to the ToonzFarm Controller
   The Controller should run on %1 at port %2
   Please start the Controller before using the ToonzFarm</source>
        <translation>未能连接到 Toonz 农场控制器。
控制器应该在 %2 的 %1 端口上运行。
请在使用 Toonz 农场之前启动控制器</translation>
    </message>
</context>
<context>
    <name>BatchesController</name>
    <message>
        <source>Tasks</source>
        <translation>任务</translation>
    </message>
    <message>
        <source>The Task List is empty!</source>
        <translation>任务列表是空的！</translation>
    </message>
    <message>
        <source>The current task list has been modified.
Do you want to save your changes?</source>
        <translation>当前任务列表已被修改。
是否要保存更改？</translation>
    </message>
    <message>
        <source>Save</source>
        <translation>保存</translation>
    </message>
    <message>
        <source>Discard</source>
        <translation>放弃更改</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>The %1 task is currently active.
Stop it or wait for its completion before removing it.</source>
        <translation>%1 任务当前是活动的。
请在删除之前停止它或者等待其完成。</translation>
    </message>
</context>
<context>
    <name>BinarizePopup</name>
    <message>
        <source>Binarize</source>
        <translation>二值化</translation>
    </message>
    <message>
        <source>Alpha</source>
        <translation>Alpha</translation>
    </message>
    <message>
        <source>Preview</source>
        <translation>预览</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>应用</translation>
    </message>
    <message>
        <source>No raster frames selected</source>
        <translation>未选择光栅帧</translation>
    </message>
    <message>
        <source>Binarizing images</source>
        <translation>正在二值化图像</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
</context>
<context>
    <name>BrightnessAndContrastPopup</name>
    <message>
        <source>Brightness and Contrast</source>
        <translation>亮度和对比度</translation>
    </message>
    <message>
        <source>Brightness:</source>
        <translation>亮度:</translation>
    </message>
    <message>
        <source>Contrast:</source>
        <translation>对比度:</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>应用</translation>
    </message>
</context>
<context>
    <name>BrowserPopup</name>
    <message>
        <source>Choose</source>
        <translation>选择</translation>
    </message>
    <message>
        <source>Path %1 doesn&apos;t exists.</source>
        <translation>路径 %1 不存在。</translation>
    </message>
</context>
<context>
    <name>CameraCaptureLevelControl</name>
    <message>
        <source>Black Point Value</source>
        <translation>黑场值</translation>
    </message>
    <message>
        <source>White Point Value</source>
        <translation>白场值</translation>
    </message>
    <message>
        <source>Threshold Value</source>
        <translation>阀值</translation>
    </message>
    <message>
        <source>Gamma Value</source>
        <translation>伽㐷值</translation>
    </message>
</context>
<context>
    <name>CameraCaptureLevelHistogram</name>
    <message>
        <source>Click to Update Histogram</source>
        <translation>点击更新直方图</translation>
    </message>
    <message>
        <source>Drag to Move White Point</source>
        <translation>拖动以移动白场</translation>
    </message>
    <message>
        <source>Drag to Move Gamma</source>
        <translation>拖动以移动伽㐷</translation>
    </message>
    <message>
        <source>Drag to Move Black Point</source>
        <translation>拖动以移动黑场</translation>
    </message>
    <message>
        <source>Drag to Move Threshold Point</source>
        <translation>拖动以移动阀值点</translation>
    </message>
</context>
<context>
    <name>CameraSettingsPopup</name>
    <message>
        <source>Name:</source>
        <translation>名称:</translation>
    </message>
    <message>
        <source>Camera#%1 Settings</source>
        <translation>摄影机# %1 设置</translation>
    </message>
    <message>
        <source>Current Camera Settings</source>
        <translation>当前摄影机设置</translation>
    </message>
</context>
<context>
    <name>CanvasSizePopup</name>
    <message>
        <source>Canvas Size</source>
        <translation>画布尺寸</translation>
    </message>
    <message>
        <source>Current Size</source>
        <translation>当前尺寸</translation>
    </message>
    <message>
        <source>Width:</source>
        <translation>宽度:</translation>
    </message>
    <message>
        <source>Height:</source>
        <translation>高度:</translation>
    </message>
    <message>
        <source>New Size</source>
        <translation>新尺寸</translation>
    </message>
    <message>
        <source>Unit:</source>
        <translation>单位:</translation>
    </message>
    <message>
        <source>Relative</source>
        <translation>相对</translation>
    </message>
    <message>
        <source>Anchor</source>
        <translation>定位</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Resize</source>
        <translation>调整尺寸</translation>
    </message>
    <message>
        <source>The new canvas size is smaller than the current one.
Do you want to crop the canvas?</source>
        <translation>新画布尺寸小于当前尺寸。
是要裁切画布吗？</translation>
    </message>
    <message>
        <source>Crop</source>
        <translation>裁切</translation>
    </message>
</context>
<context>
    <name>CaptureSettingsPopup</name>
    <message>
        <source>Define Device</source>
        <translation>定义设备</translation>
    </message>
    <message>
        <source>V Resolution</source>
        <translation>垂直分辨率</translation>
    </message>
    <message>
        <source>H Resolution</source>
        <translation>水平分辨率</translation>
    </message>
    <message>
        <source>White Calibration</source>
        <translation>白场校准</translation>
    </message>
    <message>
        <source>Capture</source>
        <translation>捕获</translation>
    </message>
    <message>
        <source>Brightness:</source>
        <translation>亮度:</translation>
    </message>
    <message>
        <source>Contrast:</source>
        <translation>对比度:</translation>
    </message>
    <message>
        <source> Upside-down</source>
        <translation>垂直翻转</translation>
    </message>
    <message>
        <source>A Device is Connected.</source>
        <translation>设备已连接。</translation>
    </message>
    <message>
        <source>No cameras found.</source>
        <translation>没找到摄影机。</translation>
    </message>
    <message>
        <source>Device Disconnected.</source>
        <translation>设备已经断开。</translation>
    </message>
    <message>
        <source>No Device Defined.</source>
        <translation>没有定义的设备。</translation>
    </message>
</context>
<context>
    <name>CastBrowser</name>
    <message>
        <source>It is not possible to edit the selected file.</source>
        <translation>无法编辑所选文件。</translation>
    </message>
    <message>
        <source>It is not possible to edit more than one file at once.</source>
        <translation>无法同时编辑多个文件。</translation>
    </message>
    <message>
        <source>It is not possible to show the folder containing the selected file, as the file has not been saved yet.</source>
        <translation>无法显示包含所选文件的文件夹，因为该文件还未保存。</translation>
    </message>
    <message>
        <source>It is not possible to view the selected file, as the file has not been saved yet.</source>
        <translation>无法查看包含所选文件，因为该文件还未保存。</translation>
    </message>
    <message>
        <source>It is not possible to show the info of the selected file, as the file has not been saved yet.</source>
        <translation>无法显示所选文件的信息，因为该文件还未保存。</translation>
    </message>
</context>
<context>
    <name>CastTreeViewer</name>
    <message>
        <source>Delete folder </source>
        <translation>删除文件夹</translation>
    </message>
    <message>
        <source>Yes</source>
        <translation>是</translation>
    </message>
    <message>
        <source>No</source>
        <translation>否</translation>
    </message>
</context>
<context>
    <name>ChooseCameraDialog</name>
    <message>
        <source>Ok</source>
        <translation>确定</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
</context>
<context>
    <name>CleanupPopup</name>
    <message>
        <source>Do you want to cleanup this frame?</source>
        <translation>是否要对这个帧进行清稿？</translation>
    </message>
    <message>
        <source>Cleanup</source>
        <translation>清稿</translation>
    </message>
    <message>
        <source>Cleanup in progress</source>
        <translation>正在进行清稿</translation>
    </message>
    <message>
        <source>Skip</source>
        <translation>跳过</translation>
    </message>
    <message>
        <source>Cleanup All</source>
        <translation>全部进行清稿</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Cleanup in progress: </source>
        <translation>正在进行清稿: </translation>
    </message>
    <message>
        <source>It is not possible to cleanup: the cleanup list is empty.</source>
        <translation>无法进行清稿: 清稿列表是空的。</translation>
    </message>
    <message>
        <source>The resulting resolution of level &quot;%1&quot;
does not match with that of previously cleaned up level drawings.

Please set the right camera resolution and closest field, or choose to delete
the existing level and create a new one when running the cleanup process.</source>
        <translation>层级“%1”的结果分辨率与之前已清稿的层级绘图不一直。

当运行清稿程序时，请设置正确的摄影机分辨率和最近的视界，
或者选择删除已有的层级然后再创建新的。</translation>
    </message>
    <message>
        <source>Selected drawings will overwrite the original files after the cleanup process.
Do you want to continue?</source>
        <translation>清稿程序之后所选的绘图会覆盖原文件。
要继续吗？</translation>
    </message>
    <message>
        <source>Ok</source>
        <translation>确定</translation>
    </message>
    <message>
        <source>There were errors opening the existing level &quot;%1&quot;.

Please choose to delete the existing level and create a new one
when running the cleanup process.</source>
        <translation>打开已有的层级“%1”时发生了错误。

当运行清稿程序时，请选择删除已有的层级并重新创建新的。</translation>
    </message>
    <message>
        <source>Couldn&apos;t create directory &quot;%1&quot;</source>
        <translation>未能创建目录“%1”</translation>
    </message>
    <message>
        <source>Couldn&apos;t open &quot;%1&quot; for write</source>
        <translation>未能打开“%1”以供写入</translation>
    </message>
    <message>
        <source>Couldn&apos;t remove file &quot;%1&quot;</source>
        <translation>未能删除文件“%1”</translation>
    </message>
    <message>
        <source>View</source>
        <translation>视图</translation>
    </message>
    <message>
        <source> : Cleanup in progress</source>
        <translation> : 正在进行清稿</translation>
    </message>
</context>
<context>
    <name>CleanupPopup::OverwriteDialog</name>
    <message>
        <source>Warning!</source>
        <translation>警告！</translation>
    </message>
    <message>
        <source>Cleanup all selected drawings overwriting those previously cleaned up.</source>
        <translation>清稿所有选中的图像，并对上一次已经清稿过的重新清稿。</translation>
    </message>
    <message>
        <source>Cleanup only non-cleaned up drawings and keep those previously cleaned up.</source>
        <translation>只清稿尚未处理的图像，并保持之前已经清稿过的不动。</translation>
    </message>
    <message>
        <source>Delete existing level and create a new level with selected drawings only.</source>
        <translation>删除现有的层级，并只用选中的图像来创建新层级。</translation>
    </message>
    <message>
        <source>Rename the new level adding the suffix </source>
        <translation>添加后缀重命名新层级</translation>
    </message>
    <message>
        <source>File &quot;%1&quot; already exists.
What do you want to do?</source>
        <translation>文件“%1”已经存在。
您要怎么做？</translation>
    </message>
    <message>
        <source>Cleanup all selected drawings overwriting those previously cleaned up.*</source>
        <translation>清稿所有选中的图像，并对上一次已经清稿过的重新清稿*</translation>
    </message>
    <message>
        <source>Cleanup only non-cleaned up drawings and keep those previously cleaned up.*</source>
        <translation>只清稿尚未处理的图像，并保持之前已经清稿过的不动*</translation>
    </message>
    <message>
        <source>This is Re-Cleanup. Overwrite only to the no-paint files.</source>
        <translation>重新清稿。只覆盖未上色文件。</translation>
    </message>
    <message>
        <source>* Palette will not be changed.</source>
        <translation>* 调色板不会被更改。</translation>
    </message>
</context>
<context>
    <name>CleanupSettings</name>
    <message>
        <source>Cleanup</source>
        <translation>清稿</translation>
    </message>
    <message>
        <source>Processing</source>
        <translation>处理</translation>
    </message>
    <message>
        <source>Camera</source>
        <translation>摄影机</translation>
    </message>
    <message>
        <source>Toggle Swatch Preview</source>
        <translation>显示/隐藏样本预览</translation>
    </message>
    <message>
        <source>Toggle Opacity Check</source>
        <translation>开关不透明度检查</translation>
    </message>
    <message>
        <source>Save Settings</source>
        <translation>保存设置</translation>
    </message>
    <message>
        <source>Load Settings</source>
        <translation>加载设置</translation>
    </message>
    <message>
        <source>Reset Settings</source>
        <translation>重置设置</translation>
    </message>
    <message>
        <source>Cleanup Settings</source>
        <translation>清稿设置</translation>
    </message>
    <message>
        <source>Cleanup Settings: %1</source>
        <translation>清稿设置: %1</translation>
    </message>
</context>
<context>
    <name>CleanupSettingsPane</name>
    <message>
        <source>Horizontal</source>
        <translation>水平方向</translation>
    </message>
    <message>
        <source>Vertical</source>
        <translation>垂直方向</translation>
    </message>
    <message>
        <source>MLAA Intensity:</source>
        <translation>MLAA 强度:</translation>
    </message>
    <message>
        <source>Save</source>
        <translation>保存</translation>
    </message>
    <message>
        <source>Load</source>
        <translation>加载</translation>
    </message>
    <message>
        <source>Reset</source>
        <translation>重置</translation>
    </message>
    <message>
        <source>Standard</source>
        <translation>标准</translation>
    </message>
    <message>
        <source>None</source>
        <translation>无</translation>
    </message>
    <message>
        <source>Morphological</source>
        <translation>形态</translation>
    </message>
    <message>
        <source>Greyscale</source>
        <translation>灰度</translation>
    </message>
    <message>
        <source>Color</source>
        <translation>彩色</translation>
    </message>
    <message>
        <source>Rotate</source>
        <translation>旋转</translation>
    </message>
    <message>
        <source>Flip</source>
        <translation>翻转</translation>
    </message>
    <message>
        <source>Line Processing:</source>
        <translation>线条处理:</translation>
    </message>
    <message>
        <source>Antialias:</source>
        <translation>抗锯齿:</translation>
    </message>
    <message>
        <source>Sharpness:</source>
        <translation>锐利度:</translation>
    </message>
    <message>
        <source>Despeckling:</source>
        <translation>去斑:</translation>
    </message>
    <message>
        <source>Save In</source>
        <translation>保存位置</translation>
    </message>
    <message>
        <source>Please fill the Save In field.</source>
        <translation>请填写保存位置框。</translation>
    </message>
    <message>
        <source>Cleanup Settings (Global)</source>
        <translation>清稿设置(全局)</translation>
    </message>
    <message>
        <source>Cleanup Settings: </source>
        <translation>清稿设置: </translation>
    </message>
    <message>
        <source>Cleanup Settings</source>
        <translation>清稿设置</translation>
    </message>
    <message>
        <source>Cleanup Settings: %1</source>
        <translation>清稿设置: %1</translation>
    </message>
    <message>
        <source>Autocenter</source>
        <translation>自动定位中心</translation>
    </message>
    <message>
        <source>Pegbar Holes</source>
        <translation>定位尺孔</translation>
    </message>
    <message>
        <source>Field Guide</source>
        <translation>规格板</translation>
    </message>
    <message>
        <source>Bottom</source>
        <translation>下</translation>
    </message>
    <message>
        <source>Top</source>
        <translation>上</translation>
    </message>
    <message>
        <source>Left</source>
        <translation>左</translation>
    </message>
    <message>
        <source>Right</source>
        <translation>右</translation>
    </message>
</context>
<context>
    <name>CleanupTab</name>
    <message>
        <source>Autocenter</source>
        <translation>自动定位中心</translation>
    </message>
    <message>
        <source>Pegbar Holes:</source>
        <translation>定位尺孔:</translation>
    </message>
    <message>
        <source>Field Guide:</source>
        <translation>规格板:</translation>
    </message>
    <message>
        <source>Rotate:</source>
        <translation>旋转:</translation>
    </message>
    <message>
        <source>Flip:</source>
        <translation>翻转:</translation>
    </message>
    <message>
        <source>Horizontal</source>
        <translation>水平</translation>
    </message>
    <message>
        <source>Vertical</source>
        <translation>垂直</translation>
    </message>
    <message>
        <source>Save in:</source>
        <translation>保存位置:</translation>
    </message>
</context>
<context>
    <name>ClipListViewer</name>
    <message>
        <source>Load Scene</source>
        <translation>加载场景</translation>
    </message>
</context>
<context>
    <name>CloneLevelUndo::LevelNamePopup</name>
    <message>
        <source>Clone Level</source>
        <translation>克隆层级</translation>
    </message>
    <message>
        <source>Level Name:</source>
        <translation>层级名称:</translation>
    </message>
</context>
<context>
    <name>ColorModelViewer</name>
    <message>
        <source>Color Model</source>
        <translation>色彩模型</translation>
    </message>
    <message>
        <source>Use Current Frame</source>
        <translation>使用当前帧</translation>
    </message>
    <message>
        <source>Remove Color Model</source>
        <translation>删除色彩模型</translation>
    </message>
    <message>
        <source>It is not possible to retrieve the color model set for the current level.</source>
        <translation>无法为当前层级检索到色彩模型设置。</translation>
    </message>
    <message>
        <source>Reset View</source>
        <translation>重置视图</translation>
    </message>
    <message>
        <source>Fit to Window</source>
        <translation>适合窗口</translation>
    </message>
    <message>
        <source>Update Colors by Using Picked Positions</source>
        <translation>按选中的位置更新颜色</translation>
    </message>
</context>
<context>
    <name>ComboViewerPanel</name>
    <message>
        <source>Safe Area (Right Click to Select)</source>
        <translation>安全区域(右键单击可选择)</translation>
    </message>
    <message>
        <source>Field Guide</source>
        <translation>规格板</translation>
    </message>
    <message>
        <source>Camera Stand View</source>
        <translation>摄影机位视图</translation>
    </message>
    <message>
        <source>3D View</source>
        <translation>3D 视图</translation>
    </message>
    <message>
        <source>Camera View</source>
        <translation>摄影机视图</translation>
    </message>
    <message>
        <source>Freeze</source>
        <translation>冻结</translation>
    </message>
    <message>
        <source>GUI Show / Hide</source>
        <translation>显示/隐藏界面</translation>
    </message>
    <message>
        <source>Toolbar</source>
        <translation>工具条</translation>
    </message>
    <message>
        <source>Tool Options Bar</source>
        <translation>工具选项条</translation>
    </message>
    <message>
        <source>Console</source>
        <translation>控制台</translation>
    </message>
    <message>
        <source>Preview</source>
        <translation>预览</translation>
    </message>
    <message>
        <source>Sub-camera Preview</source>
        <translation>子摄影机预览</translation>
    </message>
    <message>
        <source>Untitled</source>
        <translation>未命名</translation>
    </message>
    <message>
        <source>Scene: </source>
        <translation>场景: </translation>
    </message>
    <message>
        <source>   ::   Frame: </source>
        <translation>    ::    帧: </translation>
    </message>
    <message>
        <source>   ::   Level: </source>
        <translation>    ::   层级: </translation>
    </message>
    <message>
        <source>Level: </source>
        <translation>层级: </translation>
    </message>
</context>
<context>
    <name>CommandListTree</name>
    <message>
        <source>----Separator----</source>
        <translation>----分隔条----</translation>
    </message>
</context>
<context>
    <name>ConflictWidget</name>
    <message>
        <source>Mine</source>
        <translation>我的</translation>
    </message>
    <message>
        <source>Theirs</source>
        <translation>他们的</translation>
    </message>
</context>
<context>
    <name>ConvertPopup</name>
    <message>
        <source>Convert</source>
        <translation>转换</translation>
    </message>
    <message>
        <source>Start:</source>
        <translation>开始:</translation>
    </message>
    <message>
        <source>Save in:</source>
        <translation>保存位置:</translation>
    </message>
    <message>
        <source>Options</source>
        <translation>选项</translation>
    </message>
    <message>
        <source>File Format:</source>
        <translation>文件格式:</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Converting %1</source>
        <translation>正在转换 %1</translation>
    </message>
    <message>
        <source>Convert... </source>
        <translation>转换...</translation>
    </message>
    <message>
        <source>Bg Color:</source>
        <translation>背景色:</translation>
    </message>
    <message>
        <source>Skip Existing Files</source>
        <translation>跳过现有的文件</translation>
    </message>
    <message>
        <source>Convert 1 Level</source>
        <translation>转换一个层级</translation>
    </message>
    <message>
        <source>Convert %1 Levels</source>
        <translation>转换 %1 个层级</translation>
    </message>
    <message>
        <source>Converting level %1 of %2: %3</source>
        <translation>%1 / %2 正在转换层级: %3</translation>
    </message>
    <message>
        <source>Unpainted File Folder:</source>
        <translation>未上色文件的文件夹：</translation>
    </message>
    <message>
        <source> Unpainted File Suffix:</source>
        <translation>未上色的文件后缀:</translation>
    </message>
    <message>
        <source>Apply Autoclose</source>
        <translation>应用自动闭合</translation>
    </message>
    <message>
        <source>Keep Original Antialiasing</source>
        <translation>保留原来的抗锯齿</translation>
    </message>
    <message>
        <source>Add Antialiasing with Intensity:</source>
        <translation>添加抗锯齿(强度):</translation>
    </message>
    <message>
        <source>Remove Antialiasing using Threshold:</source>
        <translation>移除抗锯齿(阈值):</translation>
    </message>
    <message>
        <source>                      Palette:</source>
        <translation>                      调色板:</translation>
    </message>
    <message>
        <source>Tolerance:</source>
        <translation>阈值:</translation>
    </message>
    <message>
        <source>End:</source>
        <translation>结束:</translation>
    </message>
    <message>
        <source>File to convert:</source>
        <translation>要转换的文件:</translation>
    </message>
    <message>
        <source>Output Name:</source>
        <translation>输出名称:</translation>
    </message>
    <message>
        <source>Same as Painted</source>
        <translation>和已经上色的相同</translation>
    </message>
    <message>
        <source>No unpainted suffix specified: cannot convert.</source>
        <translation>未指定未上色文件后缀: 没法转换。</translation>
    </message>
    <message>
        <source>Level </source>
        <translation>层级</translation>
    </message>
    <message>
        <source> already exists; skipped</source>
        <translation>已存在，跳过</translation>
    </message>
    <message>
        <source>Generating level </source>
        <translation>正在生成层级</translation>
    </message>
    <message>
        <source> converted to tlv.</source>
        <translation>已转换为 TLV。</translation>
    </message>
    <message>
        <source>Level %1 converted to TLV Format</source>
        <translation>层级 %1 已转换为 TLV 格式</translation>
    </message>
    <message>
        <source>Warning: Level %1 NOT converted to TLV Format</source>
        <translation>警告: 层级 %1 未能转换为 TLV 格式</translation>
    </message>
    <message>
        <source>Converted %1 out of %2 Levels to TLV Format</source>
        <translation>%2 个层级之中的 %1 个已转换为 TLV 格式</translation>
    </message>
    <message>
        <source>No output filename specified: please choose a valid level name.</source>
        <translation>未指定输出文件名: 请选择一个有效的层级名称。</translation>
    </message>
    <message>
        <source>Mode:</source>
        <translation>模式:</translation>
    </message>
    <message>
        <source>Warning: Can&apos;t read palette &apos;%1&apos; </source>
        <translation>警告: 无法读取调色板“%1”</translation>
    </message>
    <message>
        <source>Level %1 already exists; skipped.</source>
        <translation>层级 %1 已存在，跳过。</translation>
    </message>
    <message>
        <source>Level %1 has no frame; skipped.</source>
        <translation>层级 %1 没有帧，跳过。</translation>
    </message>
    <message>
        <source>Unpainted tlv</source>
        <translation>未上色的 TLV</translation>
    </message>
    <message>
        <source>Painted tlv from two images</source>
        <translation>从两个图像转换的已上色 TLV</translation>
    </message>
    <message>
        <source>Painted tlv from non AA source</source>
        <translation>从非 AA 源转换的已上色 TLV</translation>
    </message>
    <message>
        <source>Convert completed with %1 error(s) and %2 level(s) skipped</source>
        <translation>转换完成，有 %1 个错误，已跳过 %2 个层级</translation>
    </message>
    <message>
        <source>Convert completed with %1 error(s) </source>
        <translation>转换完成，有 %1 个错误</translation>
    </message>
    <message>
        <source>%1 level(s) skipped</source>
        <translation>已跳过 %1 个层级</translation>
    </message>
    <message>
        <source>Create new palette</source>
        <translation>创建新调色板</translation>
    </message>
    <message>
        <source>Stroke Mode:</source>
        <translation>描边模式:</translation>
    </message>
    <message>
        <source>Centerline</source>
        <translation>中心线</translation>
    </message>
    <message>
        <source>Outline</source>
        <translation>轮廓线</translation>
    </message>
    <message>
        <source>Unpainted tlv from non AA source</source>
        <translation>从非 AA 源转换的未上色 TLV</translation>
    </message>
    <message>
        <source>Remove dot before frame number</source>
        <translation>移除帧编号前的点</translation>
    </message>
    <message>
        <source>  End:</source>
        <translation>  结束:</translation>
    </message>
    <message>
        <source>File Name:</source>
        <translation>文件名:</translation>
    </message>
    <message>
        <source>Save Backup to &quot;nopaint&quot; Folder</source>
        <translation>保存备份到“nopaint”文件夹</translation>
    </message>
    <message>
        <source>Antialias:</source>
        <translation>抗锯齿:</translation>
    </message>
    <message>
        <source>Palette:</source>
        <translation>调色板:</translation>
    </message>
    <message>
        <source>Append Default Palette</source>
        <translation>添加默认调色板</translation>
    </message>
    <message>
        <source>When activated, styles of the default palette
($TOONZSTUDIOPALETTE\cleanup_default.tpl) will
be appended to the palette after conversion in
order to save the effort of creating styles
before color designing.</source>
        <translation>启用该选项时，会在转换完成后附加默认调色板
($TOONZSTUDIOPALETTE\cleanup_default.tpl)的样式到调色板中。
这样可以在创建色板的时候，省去新建样式的功夫。</translation>
    </message>
    <message>
        <source>Remove Unused Styles from Input Palette</source>
        <translation>删除置入调色板中的未用样式</translation>
    </message>
    <message>
        <source>Image DPI</source>
        <translation>图像 DPI</translation>
    </message>
    <message>
        <source>Current Camera DPI</source>
        <translation>当前摄影机 DPI</translation>
    </message>
    <message>
        <source>Custom DPI</source>
        <translation>自定 DPI</translation>
    </message>
    <message>
        <source>Specify the policy for setting DPI of converted tlv.
If you select the &quot;Image DPI&quot; option and the source image does not
contain the dpi information, then the current camera dpi will be used.
</source>
        <translation>指定转换 TLV 的 DPI设置策略。如果选择 “图像 DPI”，
而且源图不包含 DPI 信息，则采用当前摄影机 DPI。</translation>
    </message>
    <message>
        <source>Dpi:</source>
        <translation>DPI:</translation>
    </message>
    <message>
        <source>When activated, styles of the default palette
($TOONZSTUDIOPALETTE\cleanup_default.tpl) will 
be appended to the palette after conversion in 
order to save the effort of creating styles 
before color designing.</source>
        <translation>当启用时，默认调色板的样式
($TOONZSTUDIOPALETTE\cleanup_default.tpl)
将在转换后被打包到调色板中，
以便在开始颜色设计前保存样式调整效果。</translation>
    </message>
    <message>
        <source>Specify the policy for setting DPI of converted tlv. 
If you select the &quot;Image DPI&quot; option and the source image does not 
contain the dpi information, then the current camera dpi will be used.
</source>
        <translation>指定转换 TLV 的 DPI 设置策略。
如果选择了“图像 DPI” 而源图像
没包含 DPI 信息，则采用当前摄影机的 DPI。</translation>
    </message>
</context>
<context>
    <name>DVGui::ProgressDialog</name>
    <message>
        <source>Loading &quot;%1&quot;...</source>
        <translation>正在加载“%1”...</translation>
    </message>
    <message>
        <source>Importing &quot;%1&quot;...</source>
        <translation>正在导入“%1”...</translation>
    </message>
</context>
<context>
    <name>DateChooserWidget</name>
    <message>
        <source>time ago.</source>
        <translation>小时前。</translation>
    </message>
    <message>
        <source>days ago.</source>
        <translation>天前。</translation>
    </message>
    <message>
        <source>weeks ago.</source>
        <translation>周前。</translation>
    </message>
    <message>
        <source>( Custom date )</source>
        <translation>(自定日期)</translation>
    </message>
</context>
<context>
    <name>DefineScannerPopup</name>
    <message>
        <source>Define Scanner</source>
        <translation>指定扫描仪</translation>
    </message>
    <message>
        <source>Scanner Driver:</source>
        <translation>扫描仪驱动:</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>OK</source>
        <translation>确定</translation>
    </message>
</context>
<context>
    <name>DeleteInkDialog</name>
    <message>
        <source>Delete Lines</source>
        <translation>删除线</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation>删除</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Style Index: </source>
        <translation>样式索引: </translation>
    </message>
    <message>
        <source>Apply to Frames: </source>
        <translation>应用给这些帧: </translation>
    </message>
    <message>
        <source>Style Index:</source>
        <translation>样式索引:</translation>
    </message>
    <message>
        <source>Apply to Frames:</source>
        <translation>应用给这些帧:</translation>
    </message>
</context>
<context>
    <name>DuplicatePopup</name>
    <message>
        <source>Repeat</source>
        <translation>重复</translation>
    </message>
    <message>
        <source>Times:</source>
        <translation>次数:</translation>
    </message>
    <message>
        <source>Up to Frame:</source>
        <translation>直到帧:</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>应用</translation>
    </message>
</context>
<context>
    <name>DvDirTreeView</name>
    <message>
        <source>Edit</source>
        <translation>编辑</translation>
    </message>
    <message>
        <source>Get</source>
        <translation>获取</translation>
    </message>
    <message>
        <source>Put...</source>
        <translation>放置...</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation>删除</translation>
    </message>
    <message>
        <source>Refresh</source>
        <translation>刷新</translation>
    </message>
    <message>
        <source>Cleanup</source>
        <translation>清理</translation>
    </message>
    <message>
        <source>Delete folder </source>
        <translation>删除文件夹</translation>
    </message>
    <message>
        <source>Yes</source>
        <translation>是</translation>
    </message>
    <message>
        <source>No</source>
        <translation>否</translation>
    </message>
    <message>
        <source>Refresh operation failed:
</source>
        <translation>刷新操作失败:
</translation>
    </message>
    <message>
        <source>Purge</source>
        <translation>清除</translation>
    </message>
    <message>
        <source>It is not possible to delete the folder.</source>
        <translation>无法删除该文件夹。</translation>
    </message>
    <message>
        <source>Refreshing...</source>
        <translation>正在刷新...</translation>
    </message>
    <message>
        <source>There was an error copying %1 to %2</source>
        <translation>拷贝 %1 到 %2 时发生了错误</translation>
    </message>
    <message>
        <source>The local path does not exist:</source>
        <translation>不存在的本地路径:</translation>
    </message>
</context>
<context>
    <name>DvItemViewerButtonBar</name>
    <message>
        <source>Up One Level</source>
        <translation>向上一层</translation>
    </message>
    <message>
        <source>New Folder</source>
        <translation>新建文件夹</translation>
    </message>
    <message>
        <source>Thumbnails View</source>
        <translation>缩略图视图</translation>
    </message>
    <message>
        <source>List View</source>
        <translation>列表视图</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>后退</translation>
    </message>
    <message>
        <source>Forward</source>
        <translation>前进</translation>
    </message>
    <message>
        <source>Icons View</source>
        <translation>图标视图</translation>
    </message>
    <message>
        <source>Export File List</source>
        <translation>导出文件列表</translation>
    </message>
    <message>
        <source>Up</source>
        <translation>向上</translation>
    </message>
    <message>
        <source>New</source>
        <translation>新建</translation>
    </message>
    <message>
        <source>Icon</source>
        <translation>图标</translation>
    </message>
    <message>
        <source>List</source>
        <translation>列表</translation>
    </message>
</context>
<context>
    <name>DvItemViewerPanel</name>
    <message>
        <source>Save File List</source>
        <translation>保存文件列表</translation>
    </message>
    <message>
        <source>File List (*.csv)</source>
        <translation>文件列表(*.csv)</translation>
    </message>
</context>
<context>
    <name>DvTopBar</name>
    <message>
        <source>File</source>
        <translation>文件</translation>
    </message>
    <message>
        <source>Edit</source>
        <translation>编辑</translation>
    </message>
    <message>
        <source>Scan &amp; Cleanup</source>
        <translation>扫描&amp;清稿</translation>
    </message>
    <message>
        <source>Level</source>
        <translation>层级</translation>
    </message>
    <message>
        <source>Xsheet</source>
        <translation>摄影表</translation>
    </message>
    <message>
        <source>Cells</source>
        <translation>帧格</translation>
    </message>
    <message>
        <source>View</source>
        <translation>视图</translation>
    </message>
    <message>
        <source>Windows</source>
        <translation>窗口</translation>
    </message>
    <message>
        <source>Scan</source>
        <translation>扫描</translation>
    </message>
    <message>
        <source>Scan &amp;&amp; Cleanup</source>
        <translation>扫描&amp;&amp;清稿</translation>
    </message>
</context>
<context>
    <name>ExportCurvePopup</name>
    <message>
        <source>Export Curve</source>
        <translation>导出曲线</translation>
    </message>
    <message>
        <source>Export</source>
        <translation>导出</translation>
    </message>
</context>
<context>
    <name>ExportLevelPopup</name>
    <message>
        <source>Export Level</source>
        <translation>导出层级</translation>
    </message>
    <message>
        <source>Export</source>
        <translation>导出</translation>
    </message>
    <message>
        <source>Format:</source>
        <translation>格式:</translation>
    </message>
    <message>
        <source>Retas Compliant</source>
        <translation>RETAS 兼容</translation>
    </message>
    <message>
        <source>Options</source>
        <translation>选项</translation>
    </message>
    <message>
        <source>Export Options</source>
        <translation>导出选项</translation>
    </message>
    <message>
        <source>The file name cannot be empty or contain any of the following characters:(new line)  \ / : * ? &quot;  |</source>
        <translation>文件名不能为空也不能包含如下的任一字符:
\ / : * ? &quot;  |</translation>
    </message>
    <message>
        <source>File Browser</source>
        <translation>文件浏览器</translation>
    </message>
</context>
<context>
    <name>ExportLevelPopup::ExportOptions</name>
    <message>
        <source>Background Color:</source>
        <translation>背景色:</translation>
    </message>
    <message>
        <source>No Antialias</source>
        <translation>无抗锯齿</translation>
    </message>
    <message>
        <source>Vectors Export Box</source>
        <translation>矢量导出框</translation>
    </message>
    <message>
        <source>Width:</source>
        <translation>宽度:</translation>
    </message>
    <message>
        <source>Height:</source>
        <translation>高度:</translation>
    </message>
    <message>
        <source>H Resolution:</source>
        <translation>水平分辨率:</translation>
    </message>
    <message>
        <source>V Resolution:</source>
        <translation>垂直分辨率:</translation>
    </message>
    <message>
        <source>DPI: </source>
        <translation>DPI: </translation>
    </message>
    <message>
        <source>Vectors Thickness</source>
        <translation>矢量线粗细</translation>
    </message>
    <message>
        <source>Mode:</source>
        <translation>模式:</translation>
    </message>
    <message>
        <source>Scale Thickness</source>
        <translation>缩放粗细</translation>
    </message>
    <message>
        <source>Add Thickness</source>
        <translation>调整粗细</translation>
    </message>
    <message>
        <source>Constant Thickness</source>
        <translation>固定粗细</translation>
    </message>
    <message>
        <source>Start:</source>
        <translation>开始:</translation>
    </message>
    <message>
        <source>End:</source>
        <translation>结束:</translation>
    </message>
    <message>
        <source>Scale:</source>
        <translation>缩放:</translation>
    </message>
</context>
<context>
    <name>ExportPanel</name>
    <message>
        <source>Export</source>
        <translation>导出</translation>
    </message>
    <message>
        <source>Save in:</source>
        <translation>保存位置:</translation>
    </message>
    <message>
        <source>File Name:</source>
        <translation>文件名:</translation>
    </message>
    <message>
        <source>File Format:</source>
        <translation>文件格式:</translation>
    </message>
    <message>
        <source>Use Markers</source>
        <translation>使用标记器</translation>
    </message>
    <message>
        <source>Options</source>
        <translation>选项</translation>
    </message>
</context>
<context>
    <name>ExportScenePopup</name>
    <message>
        <source>Export Scene</source>
        <translation>导出场景</translation>
    </message>
    <message>
        <source>Choose Existing Project</source>
        <translation>选择现有的项目</translation>
    </message>
    <message>
        <source>Create New Project</source>
        <translation>创建新项目</translation>
    </message>
    <message>
        <source>Name:</source>
        <translation>名称:</translation>
    </message>
    <message>
        <source>Export</source>
        <translation>导出</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>The folder you selected is not a project.</source>
        <translation>所选文件夹并不是一个项目。</translation>
    </message>
    <message>
        <source>There was an error exporting the scene.</source>
        <translation>导出场景时发生了错误。</translation>
    </message>
    <message>
        <source>The project name cannot be empty or contain any of the following characters:(new line)   \ / : * ? &quot;  |</source>
        <translation>项目名称不能为空也不能包含如下的任一字符:
\ / : * ? &quot;  |</translation>
    </message>
    <message>
        <source>The project name you specified is already used.</source>
        <translation>所指定的项目名称已经被使用。</translation>
    </message>
</context>
<context>
    <name>FarmServerListView</name>
    <message>
        <source>Activate</source>
        <translation>启用</translation>
    </message>
    <message>
        <source>Deactivate</source>
        <translation>停用</translation>
    </message>
</context>
<context>
    <name>FileBrowser</name>
    <message>
        <source>Folder: </source>
        <translation>路径: </translation>
    </message>
    <message>
        <source>Can&apos;t change file extension</source>
        <translation>无法改变文件扩展名</translation>
    </message>
    <message>
        <source>Can&apos;t set a drawing number</source>
        <translation>无法设置绘图编号</translation>
    </message>
    <message>
        <source>Can&apos;t rename. File already exists: </source>
        <translation>无法重命名。文件已经存在: </translation>
    </message>
    <message>
        <source>Couldn&apos;t rename </source>
        <translation>无法重命名</translation>
    </message>
    <message>
        <source>Preview Screensaver</source>
        <translation>预览屏保</translation>
    </message>
    <message>
        <source>Install Screensaver</source>
        <translation>安装屏保</translation>
    </message>
    <message>
        <source>Load As Sub-xsheet</source>
        <translation>加载为子摄影表</translation>
    </message>
    <message>
        <source>Load</source>
        <translation>加载</translation>
    </message>
    <message>
        <source>Rename</source>
        <translation>重命名</translation>
    </message>
    <message>
        <source>Convert to Painted TLV</source>
        <translation>转换为已上色的 TLV</translation>
    </message>
    <message>
        <source>Convert to Unpainted TLV</source>
        <translation>转换为未上色的 TLV</translation>
    </message>
    <message>
        <source>Version Control</source>
        <translation>版本控制</translation>
    </message>
    <message>
        <source>Save Scene</source>
        <translation>保存场景</translation>
    </message>
    <message>
        <source>Scene name:</source>
        <translation>场景名:</translation>
    </message>
    <message>
        <source>Yes</source>
        <translation>是</translation>
    </message>
    <message>
        <source>No</source>
        <translation>否</translation>
    </message>
    <message>
        <source>Warning: level %1 already exists; overwrite?</source>
        <translation>警告: 层级 %1 已经存在，要覆盖它吗？</translation>
    </message>
    <message>
        <source>Done: 2 Levels  converted to TLV Format</source>
        <translation>完成: 2 个层级已转换为 TLV 格式</translation>
    </message>
    <message>
        <source>Done: All Levels  converted to TLV Format</source>
        <translation>完成: 所有层级已转换为 TLV 格式</translation>
    </message>
    <message>
        <source>Edit</source>
        <translation>编辑</translation>
    </message>
    <message>
        <source>Edit Frame Range...</source>
        <translation>编辑帧范围...</translation>
    </message>
    <message>
        <source>Put...</source>
        <translation>放置...</translation>
    </message>
    <message>
        <source>Revert</source>
        <translation>复原</translation>
    </message>
    <message>
        <source>Get</source>
        <translation>获取</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation>删除</translation>
    </message>
    <message>
        <source>Get Revision...</source>
        <translation>获取修订...</translation>
    </message>
    <message>
        <source>Unlock</source>
        <translation>解锁</translation>
    </message>
    <message>
        <source>Edit Info</source>
        <translation>编辑信息</translation>
    </message>
    <message>
        <source>Revision History...</source>
        <translation>修订历史...</translation>
    </message>
    <message>
        <source>Unlock Frame Range</source>
        <translation>解锁帧范围</translation>
    </message>
    <message>
        <source>New Folder</source>
        <translation>新建文件夹</translation>
    </message>
    <message>
        <source>There was an error copying %1 to %2</source>
        <translation>拷贝 %1 到 %2 时发生了错误</translation>
    </message>
    <message>
        <source>It is not possible to create the %1 folder.</source>
        <translation>无法创建 %1 文件夹。</translation>
    </message>
    <message>
        <source>Some files that you want to edit are currently opened. Close them first.</source>
        <translation>有些您要编辑的文件当前被打开了。请先关闭它们。</translation>
    </message>
    <message>
        <source>Some files that you want to unlock are currently opened. Close them first.</source>
        <translation>有些您要解锁的文件当前被打开了。请先关闭它们。</translation>
    </message>
    <message>
        <source>Convert To Unpainted Tlv</source>
        <translation>转换为未上色的 TLV</translation>
    </message>
    <message>
        <source>Convert To Painted Tlv</source>
        <translation>转换为已上色的 TLV</translation>
    </message>
    <message>
        <source>Open folder failed</source>
        <translation>打开文件夹失败</translation>
    </message>
    <message>
        <source>The input folder path was invalid.</source>
        <translation>输入文件夹的路径是无效的。</translation>
    </message>
</context>
<context>
    <name>FileBrowserPopup</name>
    <message>
        <source>Invalid file</source>
        <translation>无效的文件</translation>
    </message>
    <message>
        <source>OK</source>
        <translation>确定</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>File name:</source>
        <translation>文件名:</translation>
    </message>
    <message>
        <source>From:</source>
        <translation>开始:</translation>
    </message>
    <message>
        <source>To:</source>
        <translation>结束:</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>应用</translation>
    </message>
    <message>
        <source>Folder name:</source>
        <translation>文件夹:</translation>
    </message>
</context>
<context>
    <name>FileData</name>
    <message>
        <source>It is not possible to find the %1 level.</source>
        <translation>找不到层级 %1。</translation>
    </message>
    <message>
        <source>There was an error copying %1</source>
        <translation>拷贝 %1 时发生了错误</translation>
    </message>
</context>
<context>
    <name>FileSelection</name>
    <message>
        <source>Abort</source>
        <translation>中断</translation>
    </message>
    <message>
        <source>Collecting assets...</source>
        <translation>正在收集素材...</translation>
    </message>
    <message>
        <source>Importing scenes...</source>
        <translation>正在导入场景...</translation>
    </message>
</context>
<context>
    <name>FileSettingsPopup</name>
    <message>
        <source>Save in:</source>
        <translation>保存位置:</translation>
    </message>
    <message>
        <source>File Format:</source>
        <translation>文件格式:</translation>
    </message>
</context>
<context>
    <name>FileViewerPopup</name>
    <message>
        <source>Viewer</source>
        <translation>查看器</translation>
    </message>
</context>
<context>
    <name>Filmstrip</name>
    <message>
        <source>Level:  </source>
        <translation>层级: </translation>
    </message>
    <message>
        <source>Level Strip</source>
        <translation>层级条</translation>
    </message>
    <message>
        <source>- No Current Level -</source>
        <translation>- 没有当前层级 -</translation>
    </message>
</context>
<context>
    <name>FilmstripFrameHeadGadget</name>
    <message>
        <source>Click to Toggle Fixed Onion Skin</source>
        <translation>[点按]以显示/隐藏固定洋葱皮</translation>
    </message>
    <message>
        <source>Click / Drag to Toggle Onion Skin</source>
        <translation>[点按/拖动]以显示/隐藏洋葱皮</translation>
    </message>
    <message>
        <source>Drag to Extend Onion Skin, Double Click to Toggle All</source>
        <translation>[拖动]以扩展洋葱皮，[双击]以切换所有洋葱皮</translation>
    </message>
</context>
<context>
    <name>FilmstripFrames</name>
    <message>
        <source>Linear</source>
        <translation>线性</translation>
    </message>
    <message>
        <source>no icon</source>
        <translation>无图标</translation>
    </message>
</context>
<context>
    <name>FlipBook</name>
    <message>
        <source>Flipbook</source>
        <translation>翻页书</translation>
    </message>
    <message>
        <source>Rendered Frames  ::  From %1 To %2  ::  Step %3</source>
        <translation>已渲染的帧    ::    %1 到 %2 帧    ::    步长 %3</translation>
    </message>
    <message>
        <source>  ::  Shrink </source>
        <translation>    ::    收缩</translation>
    </message>
    <message>
        <source>It is not possible to save Flipbook content.</source>
        <translation>无法保存翻页书的内容。</translation>
    </message>
    <message>
        <source>Saved %1 frames out of %2 in %3</source>
        <translation>保存了 %2 中的 %1 帧到 %3 里</translation>
    </message>
    <message>
        <source>The file name cannot be empty or contain any of the following characters:(new line)  \ / : * ? &quot;  |</source>
        <translation>文件名不能为空也不能包含如下的任一字符:
\ / : * ? &quot;  |</translation>
    </message>
    <message>
        <source>It is not possible to save because the selected file format is not supported.</source>
        <translation>无法保存，因为所选文件格式是不被支持的。</translation>
    </message>
    <message>
        <source>There are no rendered images to save.</source>
        <translation>没有已渲染的图像需要保存。</translation>
    </message>
    <message>
        <source>It is not possible to take or compare snapshots for Toonz vector levels.</source>
        <translation>无法对 Toonz 矢量层级进行快照的提取或比较。</translation>
    </message>
    <message>
        <source>File %1 already exists.
Do you want to overwrite it?</source>
        <translation>文件 %1 已经存在。
要覆盖它吗？</translation>
    </message>
</context>
<context>
    <name>FormatSettingsPopup</name>
    <message>
        <source>File Settings</source>
        <translation>文件设置</translation>
    </message>
</context>
<context>
    <name>FrameHeadGadget</name>
    <message>
        <source>Current Frame</source>
        <translation>当前帧</translation>
    </message>
    <message>
        <source>Relative Onion Skin Toggle</source>
        <translation>显示/隐藏相关洋葱皮</translation>
    </message>
    <message>
        <source>Fixed Onion Skin Toggle</source>
        <translation>显示/隐藏固定洋葱皮</translation>
    </message>
</context>
<context>
    <name>FxParamEditorPopup</name>
    <message>
        <source>Fx Settings</source>
        <translation>特效设置</translation>
    </message>
</context>
<context>
    <name>ImageViewer</name>
    <message>
        <source>Flipbook Histogram</source>
        <translation>翻页书直方图</translation>
    </message>
    <message>
        <source>Clone Preview</source>
        <translation>克隆预览</translation>
    </message>
    <message>
        <source>Unfreeze Preview</source>
        <translation>取消冻结预览</translation>
    </message>
    <message>
        <source>Freeze Preview</source>
        <translation>冻结预览</translation>
    </message>
    <message>
        <source>Regenerate Preview</source>
        <translation>重新生成预览</translation>
    </message>
    <message>
        <source>Regenerate Frame Preview</source>
        <translation>重新生成帧预览</translation>
    </message>
    <message>
        <source>Reset View</source>
        <translation>重置视图</translation>
    </message>
    <message>
        <source>Fit To Window</source>
        <translation>适合窗口</translation>
    </message>
    <message>
        <source>Exit Full Screen Mode</source>
        <translation>退出全屏模式</translation>
    </message>
    <message>
        <source>Full Screen Mode</source>
        <translation>全屏模式</translation>
    </message>
    <message>
        <source>Load Images</source>
        <translation>加载图像</translation>
    </message>
    <message>
        <source>Append Images</source>
        <translation>附加图像</translation>
    </message>
    <message>
        <source>Save Images</source>
        <translation>保存图像</translation>
    </message>
    <message>
        <source>Show Histogram</source>
        <translation>显示直方图</translation>
    </message>
    <message>
        <source>Swap Compared Images</source>
        <translation>交换比较过的图像</translation>
    </message>
    <message>
        <source>  ::  Zoom : </source>
        <translation>    ::    缩放: </translation>
    </message>
    <message>
        <source>Load / Append Images</source>
        <translation>加载/附加图像</translation>
    </message>
</context>
<context>
    <name>ImportMagpieFilePopup</name>
    <message>
        <source>Import Magpie File</source>
        <translation>导入 MAGPIE 文件</translation>
    </message>
    <message>
        <source>Load</source>
        <translation>加载</translation>
    </message>
    <message>
        <source>%1 does not exist.</source>
        <translation>%1 不存在。</translation>
    </message>
</context>
<context>
    <name>InbetweenDialog</name>
    <message>
        <source>Inbetween</source>
        <translation>过渡帧</translation>
    </message>
    <message>
        <source>Linear</source>
        <translation>线性</translation>
    </message>
    <message>
        <source>Ease In</source>
        <translation>缓入</translation>
    </message>
    <message>
        <source>Ease Out</source>
        <translation>缓出</translation>
    </message>
    <message>
        <source>Ease In / Ease Out</source>
        <translation>缓入/缓出</translation>
    </message>
    <message>
        <source>Interpolation:</source>
        <translation>插值:</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
</context>
<context>
    <name>InsertFxPopup</name>
    <message>
        <source>FX Browser</source>
        <translation>特效浏览器</translation>
    </message>
    <message>
        <source>Insert</source>
        <translation>插入</translation>
    </message>
    <message>
        <source>Add</source>
        <translation>添加</translation>
    </message>
    <message>
        <source>Replace</source>
        <translation>替换</translation>
    </message>
    <message>
        <source>Macro</source>
        <translation>宏</translation>
    </message>
    <message>
        <source>Remove Macro FX</source>
        <translation>删除宏特效</translation>
    </message>
    <message>
        <source>Remove Preset</source>
        <translation>删除预设</translation>
    </message>
    <message>
        <source>Yes</source>
        <translation>是</translation>
    </message>
    <message>
        <source>No</source>
        <translation>否</translation>
    </message>
    <message>
        <source>Are you sure you want to delete %1?</source>
        <translation>您确定要删除 %1 吗？</translation>
    </message>
    <message>
        <source>It is not possible to delete %1.</source>
        <translation>无法删除 %1。</translation>
    </message>
</context>
<context>
    <name>LayerHeaderPanel</name>
    <message>
        <source>Preview Visbility Toggle All</source>
        <translation>全部预览可见性开关</translation>
    </message>
    <message>
        <source>Camera Stand Visibility Toggle All</source>
        <translation>全部摄影机可见性开关</translation>
    </message>
    <message>
        <source>Lock Toggle All</source>
        <translation>全部锁定开关</translation>
    </message>
</context>
<context>
    <name>LevelCreatePopup</name>
    <message>
        <source>New Level</source>
        <translation>新建层级</translation>
    </message>
    <message>
        <source>Name:</source>
        <translation>名称:</translation>
    </message>
    <message>
        <source>To:</source>
        <translation>结束帧:</translation>
    </message>
    <message>
        <source>From:</source>
        <translation>开始帧:</translation>
    </message>
    <message>
        <source>Increment:</source>
        <translation>编号增量:</translation>
    </message>
    <message>
        <source>Step:</source>
        <translation>步长:</translation>
    </message>
    <message>
        <source>Type:</source>
        <translation>类型:</translation>
    </message>
    <message>
        <source>Save in:</source>
        <translation>保存位置:</translation>
    </message>
    <message>
        <source>Width:</source>
        <translation>宽度:</translation>
    </message>
    <message>
        <source>Height:</source>
        <translation>高度:</translation>
    </message>
    <message>
        <source>Create</source>
        <translation>创建</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>DPI:</source>
        <translation>DPI:</translation>
    </message>
    <message>
        <source>No level name specified: please choose a valid level name</source>
        <translation>未指定层级名称: 请选择一个有效的层级名称</translation>
    </message>
    <message>
        <source>Invalid frame range</source>
        <translation>无效的帧范围</translation>
    </message>
    <message>
        <source>Invalid step value</source>
        <translation>无效的步长值</translation>
    </message>
    <message>
        <source>The level name specified is already used: please choose a different level name</source>
        <translation>所指定的层级名称已经被使用: 请选择一个不同的层级名称</translation>
    </message>
    <message>
        <source>Folder %1 doesn&apos;t exist.
Do you want to create it?</source>
        <translation>文件夹 %1不存在。
要创建它吗？</translation>
    </message>
    <message>
        <source>Unable to create</source>
        <translation>无法创建</translation>
    </message>
    <message>
        <source>Invalid increment value</source>
        <translation>无效的增量值</translation>
    </message>
    <message>
        <source>OK</source>
        <translation>确定</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>应用</translation>
    </message>
    <message>
        <source>Save In:</source>
        <translation>保存位置:</translation>
    </message>
</context>
<context>
    <name>LevelSettingsPopup</name>
    <message>
        <source>Level Settings</source>
        <translation>层级设置</translation>
    </message>
    <message>
        <source>Name:</source>
        <translation>名称:</translation>
    </message>
    <message>
        <source>Path:</source>
        <translation>路径:</translation>
    </message>
    <message>
        <source>Scan Path:</source>
        <translation>扫描路径:</translation>
    </message>
    <message>
        <source>Forced Squared Pixel</source>
        <translation>强制正方形像素</translation>
    </message>
    <message>
        <source>Width:</source>
        <translation>宽度:</translation>
    </message>
    <message>
        <source>Height:</source>
        <translation>高度:</translation>
    </message>
    <message>
        <source>Use Camera DPI</source>
        <translation>使用摄影机 DPI</translation>
    </message>
    <message>
        <source>Camera DPI:</source>
        <translation>摄影机 DPI:</translation>
    </message>
    <message>
        <source>Image DPI:</source>
        <translation>图像 DPI:</translation>
    </message>
    <message>
        <source>Image Resolution:</source>
        <translation>图像分辨率:</translation>
    </message>
    <message>
        <source>Premultiply</source>
        <translation>预乘 Alpha</translation>
    </message>
    <message>
        <source>White As Transparent</source>
        <translation>将白色当作透明</translation>
    </message>
    <message>
        <source>      Subsampling:</source>
        <translation>      子采样:</translation>
    </message>
    <message>
        <source>DPI:</source>
        <translation>DPI:</translation>
    </message>
    <message>
        <source>The file %1 is not a sound level.</source>
        <translation>文件 %1 不是一个声音层级。</translation>
    </message>
    <message>
        <source>Add Antialiasing</source>
        <translation>添加抗锯齿</translation>
    </message>
    <message>
        <source>Antialias Softness:</source>
        <translation>抗锯齿柔化度:</translation>
    </message>
    <message>
        <source>Subsampling:</source>
        <translation>子采样:</translation>
    </message>
    <message>
        <source>Name &amp;&amp; Path</source>
        <translation>名字 &amp;&amp; 路径</translation>
    </message>
    <message>
        <source>DPI &amp;&amp; Resolution</source>
        <translation>DPI &amp;&amp; 分辨率</translation>
    </message>
    <message>
        <source>Resolution:</source>
        <translation>分辨率:</translation>
    </message>
    <message>
        <source>Resolution</source>
        <translation>分辨率</translation>
    </message>
</context>
<context>
    <name>LineTestCapturePane</name>
    <message>
        <source>Name:</source>
        <translation>名称:</translation>
    </message>
    <message>
        <source>Frame:</source>
        <translation>帧:</translation>
    </message>
    <message>
        <source>Increment:</source>
        <translation>编号增量:</translation>
    </message>
    <message>
        <source>Step:</source>
        <translation>步长:</translation>
    </message>
    <message>
        <source>Mode:</source>
        <translation>模式:</translation>
    </message>
    <message>
        <source>New     </source>
        <translation>新建  </translation>
    </message>
    <message>
        <source>Overwite     </source>
        <translation>覆盖    </translation>
    </message>
    <message>
        <source>Insert</source>
        <translation>插入</translation>
    </message>
    <message>
        <source> Onion Skin  </source>
        <translation> 洋葱皮 </translation>
    </message>
    <message>
        <source> View Frame</source>
        <translation> 查看帧</translation>
    </message>
    <message>
        <source>Fade:</source>
        <translation>淡化:</translation>
    </message>
    <message>
        <source> Connection</source>
        <translation> 连接</translation>
    </message>
    <message>
        <source>       Capture       </source>
        <translation>       拍摄     </translation>
    </message>
    <message>
        <source>Capture Settings</source>
        <translation>拍摄设置</translation>
    </message>
    <message>
        <source>   File Settings    </source>
        <translation>   文件设置    </translation>
    </message>
    <message>
        <source>Bad Selection.</source>
        <translation>不当选择。</translation>
    </message>
    <message>
        <source>No Device Defined.</source>
        <translation>未定义的设备。</translation>
    </message>
    <message>
        <source>Cannot connect Camera</source>
        <translation>无法连接摄影机</translation>
    </message>
    <message>
        <source>Device Disconnected.</source>
        <translation>设备已经断开。</translation>
    </message>
    <message>
        <source>LineTest Capture</source>
        <translation>LineTest 拍摄</translation>
    </message>
</context>
<context>
    <name>LineTestPane</name>
    <message>
        <source>Untitled</source>
        <translation>未命名</translation>
    </message>
    <message>
        <source>Scene: </source>
        <translation>场景: </translation>
    </message>
    <message>
        <source>   ::   Frame: </source>
        <translation>    ::    帧: </translation>
    </message>
    <message>
        <source>   ::   Level: </source>
        <translation>    ::   层级: </translation>
    </message>
    <message>
        <source>Level: </source>
        <translation>层级: </translation>
    </message>
    <message>
        <source>Preview</source>
        <translation>预览</translation>
    </message>
</context>
<context>
    <name>LinesFadePopup</name>
    <message>
        <source>Color Fade</source>
        <translation>颜色淡化</translation>
    </message>
    <message>
        <source>Fade:</source>
        <translation>淡化:</translation>
    </message>
    <message>
        <source>Intensity:</source>
        <translation>强度:</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>应用</translation>
    </message>
</context>
<context>
    <name>LoadColorModelPopup</name>
    <message>
        <source>Load Color Model</source>
        <translation>加载色彩模型</translation>
    </message>
    <message>
        <source>Load</source>
        <translation>加载</translation>
    </message>
    <message>
        <source>Palette from Frame:</source>
        <translation>调色板开始帧:</translation>
    </message>
    <message>
        <source>Frames :</source>
        <translation>帧:</translation>
    </message>
</context>
<context>
    <name>LoadCurvePopup</name>
    <message>
        <source>Load Curve</source>
        <translation>加载曲线</translation>
    </message>
    <message>
        <source>Load</source>
        <translation>加载</translation>
    </message>
</context>
<context>
    <name>LoadFolderPopup</name>
    <message>
        <source>Load Folder</source>
        <translation>加载文件夹</translation>
    </message>
</context>
<context>
    <name>LoadImagesPopup</name>
    <message>
        <source>Load Images</source>
        <translation>加载图像</translation>
    </message>
    <message>
        <source>Load</source>
        <translation>加载</translation>
    </message>
    <message>
        <source>Append Images</source>
        <translation>附加图像</translation>
    </message>
    <message>
        <source>From:</source>
        <translation>开始帧:</translation>
    </message>
    <message>
        <source>To:</source>
        <translation>结束帧:</translation>
    </message>
    <message>
        <source>Step:</source>
        <translation>步长:</translation>
    </message>
    <message>
        <source>Shrink:</source>
        <translation>收缩:</translation>
    </message>
    <message>
        <source>Append</source>
        <translation>附加</translation>
    </message>
    <message>
        <source>Load / Append Images</source>
        <translation>加载/附加 图像</translation>
    </message>
</context>
<context>
    <name>LoadLevelPopup</name>
    <message>
        <source>On Demand</source>
        <translation>按需</translation>
    </message>
    <message>
        <source>All Icons</source>
        <translation>所有图标</translation>
    </message>
    <message>
        <source>All Icons &amp; Images</source>
        <translation>所有图标和图像</translation>
    </message>
    <message>
        <source>Load Level</source>
        <translation>加载层级</translation>
    </message>
    <message>
        <source>Load</source>
        <translation>加载</translation>
    </message>
    <message>
        <source>%1 does not exist.</source>
        <translation>%1 不存在。</translation>
    </message>
    <message>
        <source>TLV Caching Behavior</source>
        <translation>TLV 缓存行为</translation>
    </message>
    <message>
        <source>Load Subsequence Level</source>
        <translation>加载子序列层级</translation>
    </message>
    <message>
        <source>Arrangement in Xsheet</source>
        <translation>摄影表中的排列</translation>
    </message>
    <message>
        <source>(FILE DOES NOT EXIST)</source>
        <translation>(文件不存在)</translation>
    </message>
    <message>
        <source>From:</source>
        <translation>从:</translation>
    </message>
    <message>
        <source> To:</source>
        <translation> 到:</translation>
    </message>
    <message>
        <source> Step:</source>
        <translation> 步长:</translation>
    </message>
    <message>
        <source> Inc:</source>
        <translation> 增量:</translation>
    </message>
    <message>
        <source>Level Name:</source>
        <translation>层级名称:</translation>
    </message>
    <message>
        <source> Frames:</source>
        <translation> 帧数:</translation>
    </message>
    <message>
        <source>::</source>
        <translation>::</translation>
    </message>
</context>
<context>
    <name>LoadScenePopup</name>
    <message>
        <source>Load Scene</source>
        <translation>加载场景</translation>
    </message>
    <message>
        <source>Load</source>
        <translation>加载</translation>
    </message>
    <message>
        <source> is not a scene file.</source>
        <translation> 不是场景文件。</translation>
    </message>
    <message>
        <source> does not exist.</source>
        <translation> 不存在。</translation>
    </message>
</context>
<context>
    <name>LoadScriptPopup</name>
    <message>
        <source>Load script</source>
        <translation>加载脚本</translation>
    </message>
</context>
<context>
    <name>LoadSettingsPopup</name>
    <message>
        <source>Load Cleanup Settings</source>
        <translation>加载清稿设置</translation>
    </message>
    <message>
        <source>Load</source>
        <translation>加载</translation>
    </message>
    <message>
        <source>%1 does not exist.</source>
        <translation>%1 不存在。</translation>
    </message>
</context>
<context>
    <name>LoadSubScenePopup</name>
    <message>
        <source>Load Sub-Xsheet</source>
        <translation>加载子摄影表</translation>
    </message>
    <message>
        <source>Load</source>
        <translation>加载</translation>
    </message>
    <message>
        <source> is not a scene file.</source>
        <translation> 不是场景文件。</translation>
    </message>
    <message>
        <source> does not exist.</source>
        <translation> 不存在。</translation>
    </message>
</context>
<context>
    <name>LoadTaskListPopup</name>
    <message>
        <source>Load Task List</source>
        <translation>加载任务列表</translation>
    </message>
    <message>
        <source>Load</source>
        <translation>加载</translation>
    </message>
    <message>
        <source> does not exist.</source>
        <translation> 不存在。</translation>
    </message>
    <message>
        <source>It is possible to load only TNZBAT files.</source>
        <translation>只能加载 TNZBAT 文件。</translation>
    </message>
</context>
<context>
    <name>LoadTaskPopup</name>
    <message>
        <source>Add</source>
        <translation>添加</translation>
    </message>
    <message>
        <source> does not exist.</source>
        <translation> 不存在。</translation>
    </message>
    <message>
        <source>Add Render Task to Batch List</source>
        <translation>添加渲染任务到批处理列表</translation>
    </message>
    <message>
        <source>Add Cleanup Task to Batch List</source>
        <translation>添加清稿任务到批处理列表</translation>
    </message>
    <message>
        <source>%1 is not a TNZ file.</source>
        <translation>%1 不是 TNZ 文件。</translation>
    </message>
    <message>
        <source> you can load only TNZ files for render task.</source>
        <translation>只能加载 TNZ 文件到渲染任务。</translation>
    </message>
    <message>
        <source> you can load only TNZ or CLN files for cleanup task.</source>
        <translation>只能加载 TNZ 或 CLN 文件到清稿任务。</translation>
    </message>
</context>
<context>
    <name>LocatorPopup</name>
    <message>
        <source>Locator</source>
        <translation>定位器</translation>
    </message>
</context>
<context>
    <name>MagpieFileImportPopup</name>
    <message>
        <source>Import Magpie File</source>
        <translation>导入 MAGPIE 文件</translation>
    </message>
    <message>
        <source>Frame Range</source>
        <translation>帧范围</translation>
    </message>
    <message>
        <source>To:</source>
        <translation>结束帧:</translation>
    </message>
    <message>
        <source>From:</source>
        <translation>开始帧:</translation>
    </message>
    <message>
        <source>Animation Level</source>
        <translation>动画层级</translation>
    </message>
    <message>
        <source>Level:</source>
        <translation>层级:</translation>
    </message>
    <message>
        <source>Phoneme</source>
        <translation>音素</translation>
    </message>
    <message>
        <source>Import</source>
        <translation>导入</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>The file path is missing.</source>
        <translation>文件路径丢失。</translation>
    </message>
</context>
<context>
    <name>MainWindow</name>
    <message>
        <source>Cannot delete</source>
        <translation>无法f删除</translation>
    </message>
    <message>
        <source>Visit Web Site</source>
        <translation>访问网站</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>&amp;New Scene</source>
        <translation>新建场景(&amp;N)</translation>
    </message>
    <message>
        <source>&amp;Load Scene...</source>
        <translation>加载场景(&amp;L)...</translation>
    </message>
    <message>
        <source>&amp;Save Scene</source>
        <translation>保存场景(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Save Scene As...</source>
        <translation>另存场景(&amp;S)...</translation>
    </message>
    <message>
        <source>&amp;Revert Scene</source>
        <translation>复原场景(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Open Recent Scene File</source>
        <translation>打开最近场景文件(&amp;O)</translation>
    </message>
    <message>
        <source>&amp;Open Recent Level File</source>
        <translation>打开最近层级文件(&amp;O)</translation>
    </message>
    <message>
        <source>&amp;Clear Recent Scene File List</source>
        <translation>清除最近场景文件列表(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Clear Recent level File List</source>
        <translation>清除最近层级文件列表(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;New Level...</source>
        <translation>新建层级(&amp;N)...</translation>
    </message>
    <message>
        <source>&amp;Load Level...</source>
        <translation>加载层级(&amp;L)...</translation>
    </message>
    <message>
        <source>&amp;Save Level</source>
        <translation>保存层级(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Save Level As...</source>
        <translation>另存层级(&amp;S)...</translation>
    </message>
    <message>
        <source>&amp;Export Level...</source>
        <translation>导出层级(&amp;E)...</translation>
    </message>
    <message>
        <source>&amp;Save Palette As...</source>
        <translation>另存调色板(&amp;S)...</translation>
    </message>
    <message>
        <source>&amp;Save Palette</source>
        <translation>保存调色板(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Load Color Model...</source>
        <translation>加载色彩模型(&amp;L)...</translation>
    </message>
    <message>
        <source>&amp;Import Magpie File...</source>
        <translation>导入 MAGPIE 文件(&amp;I)...</translation>
    </message>
    <message>
        <source>&amp;New Project...</source>
        <translation>新建项目(&amp;N)...</translation>
    </message>
    <message>
        <source>&amp;Project Settings...</source>
        <translation>项目设置(&amp;P)...</translation>
    </message>
    <message>
        <source>&amp;Save Default Settings</source>
        <translation>保存为默认设置(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Output Settings...</source>
        <translation>输出设置(&amp;O)...</translation>
    </message>
    <message>
        <source>&amp;Preview Settings...</source>
        <translation>预览设置(&amp;P)...</translation>
    </message>
    <message>
        <source>&amp;Render</source>
        <translation>渲染(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Preview</source>
        <translation>预览(&amp;P)</translation>
    </message>
    <message>
        <source>&amp;Save Previewed Frames</source>
        <translation>保存预览过的帧(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Regenerate Preview</source>
        <translation>重新生成预览(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Regenerate Frame Preview</source>
        <translation>重新生成帧预览(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Clone Preview</source>
        <translation>克隆预览(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Freeze//Unfreeze Preview</source>
        <translation>冻结/取消冻结预览(&amp;F)</translation>
    </message>
    <message>
        <source>Freeze Preview</source>
        <translation>冻结预览</translation>
    </message>
    <message>
        <source>Unfreeze Preview</source>
        <translation>取消冻结预览</translation>
    </message>
    <message>
        <source>&amp;Save As Preset</source>
        <translation>另存为预设(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Preferences...</source>
        <translation>首选项(&amp;P)...</translation>
    </message>
    <message>
        <source>&amp;Configure Shortcuts...</source>
        <translation>配置快捷键(&amp;C)...</translation>
    </message>
    <message>
        <source>&amp;Print Xsheet</source>
        <translation>打印摄影表(&amp;P)</translation>
    </message>
    <message>
        <source>&amp;Print Current Frame...</source>
        <translation>打印当前帧(&amp;P)...</translation>
    </message>
    <message>
        <source>&amp;Quit</source>
        <translation>退出(&amp;Q)</translation>
    </message>
    <message>
        <source>&amp;Select All</source>
        <translation>选择全部(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Invert Selection</source>
        <translation>反选(&amp;I)</translation>
    </message>
    <message>
        <source>&amp;Undo</source>
        <translation>撤消(&amp;U)</translation>
    </message>
    <message>
        <source>&amp;Redo</source>
        <translation>重做(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Cut</source>
        <translation>剪切(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Copy</source>
        <translation>拷贝(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Paste</source>
        <translation>粘贴(&amp;P)</translation>
    </message>
    <message>
        <source>&amp;Merge</source>
        <translation>合并(&amp;M)</translation>
    </message>
    <message>
        <source>&amp;Paste Into</source>
        <translation>贴入(&amp;P)</translation>
    </message>
    <message>
        <source>Paste RGBA Values</source>
        <translation>粘贴 RGBA 值</translation>
    </message>
    <message>
        <source>&amp;Delete</source>
        <translation>删除(&amp;D)</translation>
    </message>
    <message>
        <source>&amp;Insert</source>
        <translation>插入(&amp;I)</translation>
    </message>
    <message>
        <source>&amp;Group</source>
        <translation>成组(&amp;G)</translation>
    </message>
    <message>
        <source>&amp;Ungroup</source>
        <translation>解组(&amp;U)</translation>
    </message>
    <message>
        <source>&amp;Bring to Front</source>
        <translation>置于顶层(&amp;B)</translation>
    </message>
    <message>
        <source>&amp;Bring Forward</source>
        <translation>前移一层(&amp;B)</translation>
    </message>
    <message>
        <source>&amp;Send Back</source>
        <translation>置于底层(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Send Backward</source>
        <translation>后移一层(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Enter Group</source>
        <translation>进入组(&amp;E)</translation>
    </message>
    <message>
        <source>&amp;Exit Group</source>
        <translation>退出组(&amp;E)</translation>
    </message>
    <message>
        <source>&amp;Remove Vector Overflow</source>
        <translation>删除矢量多余部分(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Define Scanner...</source>
        <translation>指定扫描仪(&amp;D)...</translation>
    </message>
    <message>
        <source>&amp;Scan Settings...</source>
        <translation>扫描设置(&amp;S)...</translation>
    </message>
    <message>
        <source>&amp;Scan</source>
        <translation>扫描(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Set Cropbox</source>
        <translation>设置裁切框(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Reset Cropbox</source>
        <translation>重置裁切框(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Cleanup Settings...</source>
        <translation>清稿设置(&amp;C)...</translation>
    </message>
    <message>
        <source>&amp;Preview Cleanup</source>
        <translation>预览清稿(&amp;P)</translation>
    </message>
    <message>
        <source>&amp;Camera Test</source>
        <translation>摄影机测试(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Cleanup</source>
        <translation>清稿(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Add Frames...</source>
        <translation>添加帧(&amp;A)...</translation>
    </message>
    <message>
        <source>&amp;Renumber...</source>
        <translation>重新编号(&amp;R)...</translation>
    </message>
    <message>
        <source>&amp;Replace Level...</source>
        <translation>替换层级(&amp;R)...</translation>
    </message>
    <message>
        <source>&amp;Revert to Cleaned Up</source>
        <translation>复原到已清稿过的(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Revert to Last Saved Version</source>
        <translation>复原到最近保存的版本(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Expose in Xsheet</source>
        <translation>在摄影表中公开(&amp;E)</translation>
    </message>
    <message>
        <source>&amp;Display in Level Strip</source>
        <translation>在层级条中显示(&amp;D)</translation>
    </message>
    <message>
        <source>&amp;Level Settings...</source>
        <translation>层级设置(&amp;L)...</translation>
    </message>
    <message>
        <source>&amp;Brightness and Contrast...</source>
        <translation>亮度和对比度(&amp;B)...</translation>
    </message>
    <message>
        <source>&amp;Color Fade...</source>
        <translation>颜色淡化(&amp;C)...</translation>
    </message>
    <message>
        <source>&amp;Capture</source>
        <translation>拍摄(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Canvas Size...</source>
        <translation>画布尺寸(&amp;C)...</translation>
    </message>
    <message>
        <source>&amp;Info...</source>
        <translation>信息(&amp;I)...</translation>
    </message>
    <message>
        <source>&amp;View...</source>
        <translation>查看(&amp;V)...</translation>
    </message>
    <message>
        <source>&amp;Remove All Unused Levels</source>
        <translation>移除全部未用层级(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Scene Settings...</source>
        <translation>场景设置(&amp;S)...</translation>
    </message>
    <message>
        <source>&amp;Camera Settings...</source>
        <translation>摄影机设置(&amp;C)...</translation>
    </message>
    <message>
        <source>&amp;Open Sub-xsheet</source>
        <translation>打开子摄影表(&amp;O)</translation>
    </message>
    <message>
        <source>&amp;Close Sub-xsheet</source>
        <translation>关闭子摄影表(&amp;C)</translation>
    </message>
    <message>
        <source>Explode Sub-xsheet</source>
        <translation>分解子摄影表</translation>
    </message>
    <message>
        <source>Collapse</source>
        <translation>折叠</translation>
    </message>
    <message>
        <source>&amp;Save Sub-xsheet As...</source>
        <translation>另存子摄影表(&amp;S)...</translation>
    </message>
    <message>
        <source>Resequence</source>
        <translation>重新排序</translation>
    </message>
    <message>
        <source>Clone Sub-xsheet</source>
        <translation>克隆子摄影表</translation>
    </message>
    <message>
        <source>&amp;Apply Match Lines...</source>
        <translation>应用适配线(&amp;A)...</translation>
    </message>
    <message>
        <source>&amp;Delete Match Lines</source>
        <translation>删除适配线(&amp;D)</translation>
    </message>
    <message>
        <source>&amp;Delete Lines...</source>
        <translation>删除线(&amp;D)...</translation>
    </message>
    <message>
        <source>&amp;Merge Levels</source>
        <translation>合并层级(&amp;M)</translation>
    </message>
    <message>
        <source>&amp;New FX...</source>
        <translation>新建特效(&amp;N)...</translation>
    </message>
    <message>
        <source>&amp;New Output</source>
        <translation>新建输出(&amp;N)</translation>
    </message>
    <message>
        <source>&amp;Edit FX...</source>
        <translation>编辑特效(&amp;E)...</translation>
    </message>
    <message>
        <source>Insert Frame</source>
        <translation>插入帧</translation>
    </message>
    <message>
        <source>Remove Frame</source>
        <translation>删除帧</translation>
    </message>
    <message>
        <source>Insert Multiple Keys</source>
        <translation>插入多个键</translation>
    </message>
    <message>
        <source>Remove Multiple Keys</source>
        <translation>删除多个键</translation>
    </message>
    <message>
        <source>&amp;Reverse</source>
        <translation>反序(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Swing</source>
        <translation>摇摆(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Random</source>
        <translation>随机(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Autoexpose</source>
        <translation>自动公开(&amp;A)</translation>
    </message>
    <message>
        <source>&amp;Repeat...</source>
        <translation>重复(&amp;R)...</translation>
    </message>
    <message>
        <source>&amp;Step 2</source>
        <translation>2 倍步长(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Step 3</source>
        <translation>3 倍步长(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Step 4</source>
        <translation>4 倍步长(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Each 2</source>
        <translation>1/2 步长(&amp;E)</translation>
    </message>
    <message>
        <source>&amp;Each 3</source>
        <translation>1/3 步长(&amp;E)</translation>
    </message>
    <message>
        <source>&amp;Each 4</source>
        <translation>1/4 步长(&amp;E)</translation>
    </message>
    <message>
        <source>&amp;Roll Up</source>
        <translation>上卷(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Roll Down</source>
        <translation>下卷(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Time Stretch...</source>
        <translation>时间伸缩(&amp;T)...</translation>
    </message>
    <message>
        <source>&amp;Duplicate Drawing  </source>
        <translation>复制绘图(&amp;D) </translation>
    </message>
    <message>
        <source>&amp;Clone</source>
        <translation>克隆(&amp;C)</translation>
    </message>
    <message>
        <source>Drawing Substitution Forward</source>
        <translation>向前替换绘图</translation>
    </message>
    <message>
        <source>Drawing Substitution Backward</source>
        <translation>向后替换绘图</translation>
    </message>
    <message>
        <source>Similar Drawing Substitution Forward</source>
        <translation>向前替换近似绘图</translation>
    </message>
    <message>
        <source>Similar Drawing Substitution Backward</source>
        <translation>向后替换近似绘图</translation>
    </message>
    <message>
        <source>&amp;Set Key</source>
        <translation>设置关键帧(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Camera Box</source>
        <translation>摄影机框(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Table</source>
        <translation>动画圆盘(&amp;T)</translation>
    </message>
    <message>
        <source>&amp;Field Guide</source>
        <translation>规格板(&amp;F)</translation>
    </message>
    <message>
        <source>&amp;Safe Area</source>
        <translation>安全区域(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Camera BG Color</source>
        <translation>摄影机背景色(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Transparency Check  </source>
        <translation>透明度检查(&amp;T)</translation>
    </message>
    <message>
        <source>&amp;Ink Check</source>
        <translation>描线检查(&amp;I)</translation>
    </message>
    <message>
        <source>&amp;Paint Check</source>
        <translation>上色检查(&amp;P)</translation>
    </message>
    <message>
        <source>&amp;Fill Check</source>
        <translation>填充检查(&amp;F)</translation>
    </message>
    <message>
        <source>&amp;Black BG Check</source>
        <translation>黑背景检查(&amp;B)</translation>
    </message>
    <message>
        <source>&amp;Gap Check</source>
        <translation>空隙检查(&amp;G)</translation>
    </message>
    <message>
        <source>&amp;Visualize Vector As Raster</source>
        <translation>以光栅显示矢量(&amp;V)</translation>
    </message>
    <message>
        <source>&amp;Histogram</source>
        <translation>直方图(&amp;H)</translation>
    </message>
    <message>
        <source>Play</source>
        <translation>播放</translation>
    </message>
    <message>
        <source>Loop</source>
        <translation>循环</translation>
    </message>
    <message>
        <source>Pause</source>
        <translation>暂停</translation>
    </message>
    <message>
        <source>First Frame</source>
        <translation>第一帧</translation>
    </message>
    <message>
        <source>Last Frame</source>
        <translation>最后一帧</translation>
    </message>
    <message>
        <source>Previous Frame</source>
        <translation>上一帧</translation>
    </message>
    <message>
        <source>Next Frame</source>
        <translation>下一帧</translation>
    </message>
    <message>
        <source>Red Channel</source>
        <translation>红通道</translation>
    </message>
    <message>
        <source>Green Channel</source>
        <translation>绿通道</translation>
    </message>
    <message>
        <source>Blue Channel</source>
        <translation>蓝通道</translation>
    </message>
    <message>
        <source>Matte Channel</source>
        <translation>Alpha 通道</translation>
    </message>
    <message>
        <source>Red Channel Greyscale</source>
        <translation>红通道(灰阶)</translation>
    </message>
    <message>
        <source>Green Channel Greyscale</source>
        <translation>绿通道(灰阶)</translation>
    </message>
    <message>
        <source>Blue Channel Greyscale</source>
        <translation>蓝通道(灰阶)</translation>
    </message>
    <message>
        <source>&amp;Lock Room Panes</source>
        <translation>锁定工作区(&amp;L)</translation>
    </message>
    <message>
        <source>&amp;File Browser</source>
        <translation>文件浏览器(&amp;F)</translation>
    </message>
    <message>
        <source>&amp;Flipbook</source>
        <translation>翻页书(&amp;F)</translation>
    </message>
    <message>
        <source>&amp;Function Editor</source>
        <translation>功能编辑器(&amp;F)</translation>
    </message>
    <message>
        <source>&amp;Level Strip</source>
        <translation>层级条(&amp;L)</translation>
    </message>
    <message>
        <source>&amp;Palette</source>
        <translation>调色板(&amp;P)</translation>
    </message>
    <message>
        <source>&amp;Palette Gizmo</source>
        <translation>调色板装置(&amp;P)</translation>
    </message>
    <message>
        <source>&amp;Delete Unused Styles</source>
        <translation>删除未用的样式(&amp;D)</translation>
    </message>
    <message>
        <source>&amp;Tasks</source>
        <translation>任务(&amp;T)</translation>
    </message>
    <message>
        <source>&amp;Batch Servers</source>
        <translation>批处理服务器(&amp;B)</translation>
    </message>
    <message>
        <source>&amp;Color Model</source>
        <translation>色彩模型(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Studio Palette</source>
        <translation>工作室调色板(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Schematic</source>
        <translation>示意图(&amp;S)</translation>
    </message>
    <message>
        <source>Toggle FX/Stage schematic</source>
        <translation>切换特效/场景示意图</translation>
    </message>
    <message>
        <source>&amp;Scene Cast</source>
        <translation>场景演员表(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Style Editor</source>
        <translation>样式编辑器(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Toolbar</source>
        <translation>工具条(&amp;T)</translation>
    </message>
    <message>
        <source>&amp;Tool Option Bar</source>
        <translation>工具选项条(&amp;T)</translation>
    </message>
    <message>
        <source>&amp;Viewer</source>
        <translation>查看器(&amp;V)</translation>
    </message>
    <message>
        <source>&amp;LineTest Capture</source>
        <translation>线稿测试 拍摄(&amp;L)</translation>
    </message>
    <message>
        <source>&amp;LineTest Viewer</source>
        <translation>线稿测试 查看器(&amp;L)</translation>
    </message>
    <message>
        <source>&amp;Xsheet</source>
        <translation>摄影表(&amp;X)</translation>
    </message>
    <message>
        <source>&amp;Reset to Default Rooms</source>
        <translation>初始化工作区(&amp;R)</translation>
    </message>
    <message>
        <source>Onion Skin</source>
        <translation>洋葱皮</translation>
    </message>
    <message>
        <source>Duplicate</source>
        <translation>复制</translation>
    </message>
    <message>
        <source>Show Folder Contents</source>
        <translation>显示文件夹内容</translation>
    </message>
    <message>
        <source>Convert...</source>
        <translation>转换...</translation>
    </message>
    <message>
        <source>Collect Assets</source>
        <translation>收集素材</translation>
    </message>
    <message>
        <source>Import Scene</source>
        <translation>导入场景</translation>
    </message>
    <message>
        <source>Export Scene...</source>
        <translation>导出场景...</translation>
    </message>
    <message>
        <source>Premultiply</source>
        <translation>预乘 Alpha</translation>
    </message>
    <message>
        <source>Convert to Vectors...</source>
        <translation>转换为矢量...</translation>
    </message>
    <message>
        <source>Tracking...</source>
        <translation>追踪...</translation>
    </message>
    <message>
        <source>Remove Level</source>
        <translation>删除层级</translation>
    </message>
    <message>
        <source>Add As Render Task</source>
        <translation>添加为渲染任务</translation>
    </message>
    <message>
        <source>Add As Cleanup Task</source>
        <translation>添加为清稿任务</translation>
    </message>
    <message>
        <source>Select All Keys in this Frame</source>
        <translation>选择此行的全部关键帧</translation>
    </message>
    <message>
        <source>Select All Keys in this Column</source>
        <translation>选择此列的全部关键帧</translation>
    </message>
    <message>
        <source>Select All Keys</source>
        <translation>选择全部关键帧</translation>
    </message>
    <message>
        <source>Select All Following Keys</source>
        <translation>选择后面的全部关键帧</translation>
    </message>
    <message>
        <source>Select All Previous Keys</source>
        <translation>选择前面的全部关键帧</translation>
    </message>
    <message>
        <source>Select Previous Keys in this Column</source>
        <translation>选择此列前面的关键帧</translation>
    </message>
    <message>
        <source>Select Following Keys in this Column</source>
        <translation>选择此列后面的关键帧</translation>
    </message>
    <message>
        <source>Select Previous Keys in this Frame</source>
        <translation>选择此行前面的关键帧</translation>
    </message>
    <message>
        <source>Select Following Keys in this Frame</source>
        <translation>选择此行后面的关键帧</translation>
    </message>
    <message>
        <source>Invert Key Selection</source>
        <translation>反选关键帧</translation>
    </message>
    <message>
        <source>Set Acceleration</source>
        <translation>设置加速</translation>
    </message>
    <message>
        <source>Set Deceleration</source>
        <translation>设置减速</translation>
    </message>
    <message>
        <source>Set Constant Speed</source>
        <translation>设置恒定速度</translation>
    </message>
    <message>
        <source>Reset Interpolation</source>
        <translation>重置插值</translation>
    </message>
    <message>
        <source>Fold Column</source>
        <translation>折叠列</translation>
    </message>
    <message>
        <source>Activate this column only</source>
        <translation>仅启用此列</translation>
    </message>
    <message>
        <source>Activate selected columns</source>
        <translation>启用所选列</translation>
    </message>
    <message>
        <source>Activate all columns</source>
        <translation>启用全部列</translation>
    </message>
    <message>
        <source>Deactivate selected columns</source>
        <translation>停用所选列</translation>
    </message>
    <message>
        <source>Deactivate all columns</source>
        <translation>停用全部列</translation>
    </message>
    <message>
        <source>Toggle columns activation</source>
        <translation>启用/停用列</translation>
    </message>
    <message>
        <source>Enable this column only</source>
        <translation>仅启用此列</translation>
    </message>
    <message>
        <source>Enable selected columns</source>
        <translation>启用所选列</translation>
    </message>
    <message>
        <source>Enable all columns</source>
        <translation>启用全部列</translation>
    </message>
    <message>
        <source>Disable all columns</source>
        <translation>禁用全部列</translation>
    </message>
    <message>
        <source>Disable selected columns</source>
        <translation>禁用所选列</translation>
    </message>
    <message>
        <source>Swap enabled columns</source>
        <translation>交换已启用的列</translation>
    </message>
    <message>
        <source>Lock this column only</source>
        <translation>仅锁定此列</translation>
    </message>
    <message>
        <source>Lock selected columns</source>
        <translation>锁定所选列</translation>
    </message>
    <message>
        <source>Lock all columns</source>
        <translation>锁定全部列</translation>
    </message>
    <message>
        <source>Unlock selected columns</source>
        <translation>解锁所选列</translation>
    </message>
    <message>
        <source>Unlock all columns</source>
        <translation>解锁全部列</translation>
    </message>
    <message>
        <source>Swap locked columns</source>
        <translation>交换被锁的列</translation>
    </message>
    <message>
        <source>Edit Tool</source>
        <translation>编辑工具</translation>
    </message>
    <message>
        <source>Selection Tool</source>
        <translation>选择工具</translation>
    </message>
    <message>
        <source>Brush Tool</source>
        <translation>画笔工具</translation>
    </message>
    <message>
        <source>Geometric Tool</source>
        <translation>图形工具</translation>
    </message>
    <message>
        <source>Type Tool</source>
        <translation>文本工具</translation>
    </message>
    <message>
        <source>Fill Tool</source>
        <translation>填充工具</translation>
    </message>
    <message>
        <source>Fill Tool - Areas</source>
        <translation>填充工具 - 区域</translation>
    </message>
    <message>
        <source>Fill Tool - Lines</source>
        <translation>填充工具 - 线</translation>
    </message>
    <message>
        <source>Paint Brush Tool</source>
        <translation>上色笔工具</translation>
    </message>
    <message>
        <source>Eraser Tool</source>
        <translation>橡皮擦工具</translation>
    </message>
    <message>
        <source>Tape Tool</source>
        <translation>连接工具</translation>
    </message>
    <message>
        <source>Style Picker Tool</source>
        <translation>样式吸管工具</translation>
    </message>
    <message>
        <source>Style Picker Tool - Areas</source>
        <translation>样式吸管工具 - 区域</translation>
    </message>
    <message>
        <source>Style Picker Tool - Lines</source>
        <translation>样式吸管工具 - 线</translation>
    </message>
    <message>
        <source>RGB Picker Tool</source>
        <translation>RGB 吸管工具</translation>
    </message>
    <message>
        <source>Control Point Editor Tool</source>
        <translation>控制点编辑工具</translation>
    </message>
    <message>
        <source>Pinch Tool</source>
        <translation>线变形工具</translation>
    </message>
    <message>
        <source>Pump Tool</source>
        <translation>线宽工具</translation>
    </message>
    <message>
        <source>Magnet Tool</source>
        <translation>磁铁工具</translation>
    </message>
    <message>
        <source>Bender Tool</source>
        <translation>折弯工具</translation>
    </message>
    <message>
        <source>Iron Tool</source>
        <translation>熨平工具</translation>
    </message>
    <message>
        <source>Cutter Tool</source>
        <translation>切刀工具</translation>
    </message>
    <message>
        <source>Skeleton Tool</source>
        <translation>骨架工具</translation>
    </message>
    <message>
        <source>Tracker Tool</source>
        <translation>追踪工具</translation>
    </message>
    <message>
        <source>Hook Tool</source>
        <translation>挂钩工具</translation>
    </message>
    <message>
        <source>Zoom Tool</source>
        <translation>缩放工具</translation>
    </message>
    <message>
        <source>Rotate Tool</source>
        <translation>旋转工具</translation>
    </message>
    <message>
        <source>Hand Tool</source>
        <translation>抓手工具</translation>
    </message>
    <message>
        <source>Zoom In</source>
        <translation>放大</translation>
    </message>
    <message>
        <source>Zoom Out</source>
        <translation>缩小</translation>
    </message>
    <message>
        <source>Reset View</source>
        <translation>重置视图</translation>
    </message>
    <message>
        <source>Fit to Window</source>
        <translation>适合窗口</translation>
    </message>
    <message>
        <source>Actual Pixel Size</source>
        <translation>实际像素</translation>
    </message>
    <message>
        <source>Show//Hide Full Screen</source>
        <translation>显示/隐藏全屏</translation>
    </message>
    <message>
        <source>Full Screen Mode</source>
        <translation>全屏模式</translation>
    </message>
    <message>
        <source>Exit Full Screen Mode</source>
        <translation>退出全屏模式</translation>
    </message>
    <message>
        <source>Global Key</source>
        <translation>全局关键帧</translation>
    </message>
    <message>
        <source>Increase brush hardness</source>
        <translation>增加画笔硬度</translation>
    </message>
    <message>
        <source>Decrease brush hardness</source>
        <translation>降低画笔硬度</translation>
    </message>
    <message>
        <source>Auto Group</source>
        <translation>自动成组</translation>
    </message>
    <message>
        <source>Break sharp angles</source>
        <translation>断开尖角</translation>
    </message>
    <message>
        <source>Frame range</source>
        <translation>帧范围</translation>
    </message>
    <message>
        <source>Inverse kinematics</source>
        <translation>反向动力学(IK)</translation>
    </message>
    <message>
        <source>Invert</source>
        <translation>反转</translation>
    </message>
    <message>
        <source>Manual</source>
        <translation>手动</translation>
    </message>
    <message>
        <source>Onion skin</source>
        <translation>洋葱皮</translation>
    </message>
    <message>
        <source>Orientation</source>
        <translation>方向</translation>
    </message>
    <message>
        <source>Pencil Mode</source>
        <translation>铅笔模式</translation>
    </message>
    <message>
        <source>Preserve Thickness</source>
        <translation>保持粗细</translation>
    </message>
    <message>
        <source>Pressure sensibility</source>
        <translation>压力灵敏度</translation>
    </message>
    <message>
        <source>Segment Ink</source>
        <translation>自动分段</translation>
    </message>
    <message>
        <source>Selective</source>
        <translation>选择性</translation>
    </message>
    <message>
        <source>Smooth</source>
        <translation>平滑</translation>
    </message>
    <message>
        <source>Snap</source>
        <translation>吸附</translation>
    </message>
    <message>
        <source>Auto Select Drawing</source>
        <translation>自动选择绘图</translation>
    </message>
    <message>
        <source>Auto Fill</source>
        <translation>自动填充</translation>
    </message>
    <message>
        <source>Join Vectors</source>
        <translation>连接矢量</translation>
    </message>
    <message>
        <source>Show Only Active Skeleton</source>
        <translation>仅显示活动的骨架</translation>
    </message>
    <message>
        <source>Brush Preset</source>
        <translation>画笔预设</translation>
    </message>
    <message>
        <source>Geometric Shape</source>
        <translation>几何图形</translation>
    </message>
    <message>
        <source>Geometric Edge</source>
        <translation>几何边</translation>
    </message>
    <message>
        <source>Mode</source>
        <translation>模式</translation>
    </message>
    <message>
        <source>Areas Mode</source>
        <translation>区域模式</translation>
    </message>
    <message>
        <source>Lines Mode</source>
        <translation>线模式</translation>
    </message>
    <message>
        <source>Lines &amp; Areas Mode</source>
        <translation>线和区域模式</translation>
    </message>
    <message>
        <source>Type</source>
        <translation>类型</translation>
    </message>
    <message>
        <source>Normal Type</source>
        <translation>正常类型</translation>
    </message>
    <message>
        <source>Rectangular Type</source>
        <translation>长方形类型</translation>
    </message>
    <message>
        <source>Freehand Type</source>
        <translation>手绘类型</translation>
    </message>
    <message>
        <source>Polyline Type</source>
        <translation>多边形类型</translation>
    </message>
    <message>
        <source>TypeTool Font</source>
        <translation>文字工具字体</translation>
    </message>
    <message>
        <source>TypeTool Size</source>
        <translation>文字工具大小</translation>
    </message>
    <message>
        <source>TypeTool Style</source>
        <translation>文字工具样式</translation>
    </message>
    <message>
        <source>Active Axis</source>
        <translation>当前轴</translation>
    </message>
    <message>
        <source>Active Axis - Position</source>
        <translation>当前轴 - 位置</translation>
    </message>
    <message>
        <source>Active Axis - Rotation</source>
        <translation>当前轴 - 旋转</translation>
    </message>
    <message>
        <source>Active Axis - Scale</source>
        <translation>当前轴 - 缩放</translation>
    </message>
    <message>
        <source>Active Axis - Shear</source>
        <translation>当前轴 - 切变</translation>
    </message>
    <message>
        <source>Active Axis - Center</source>
        <translation>当前轴 - 中心点</translation>
    </message>
    <message>
        <source>Build Skeleton Mode</source>
        <translation>制作骨架模式</translation>
    </message>
    <message>
        <source>Animate Mode</source>
        <translation>动画模式</translation>
    </message>
    <message>
        <source>Inverse Kinematics Mode</source>
        <translation>反向动力学(IK)模式</translation>
    </message>
    <message>
        <source>None Pick Mode</source>
        <translation>无拾取模式</translation>
    </message>
    <message>
        <source>Column Pick Mode</source>
        <translation>列拾取模式</translation>
    </message>
    <message>
        <source>Pegbar Pick Mode</source>
        <translation>定位尺拾取模式</translation>
    </message>
    <message>
        <source>&amp;Reset Step</source>
        <translation>重置步长(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Increase Step</source>
        <translation>增加步长(&amp;I)</translation>
    </message>
    <message>
        <source>&amp;Decrease Step</source>
        <translation>减少步长(&amp;D)</translation>
    </message>
    <message>
        <source>Drawing</source>
        <translation>绘制</translation>
    </message>
    <message>
        <source>Animation</source>
        <translation>动画</translation>
    </message>
    <message>
        <source>Browser</source>
        <translation>浏览器</translation>
    </message>
    <message>
        <source>Pltedit</source>
        <translation>色板编辑</translation>
    </message>
    <message>
        <source>Farm</source>
        <translation>农场</translation>
    </message>
    <message>
        <source>Reload qss</source>
        <translation>重新加载样式表</translation>
    </message>
    <message>
        <source>&amp;Autocenter...</source>
        <translation>自动定位中心(&amp;A)...</translation>
    </message>
    <message>
        <source>&amp;Field Guide in Capture Window</source>
        <translation>拍摄窗口的规格板(&amp;F)</translation>
    </message>
    <message>
        <source>&amp;Guide</source>
        <translation>参考线(&amp;G)</translation>
    </message>
    <message>
        <source>&amp;Ruler</source>
        <translation>标尺(&amp;R)</translation>
    </message>
    <message>
        <source>Next Drawing</source>
        <translation>下一张图</translation>
    </message>
    <message>
        <source>Prev Drawing</source>
        <translation>上一张图</translation>
    </message>
    <message>
        <source>Toggle Autofill on Current Palette Color</source>
        <translation>切换当前调色板颜色的自动填充</translation>
    </message>
    <message>
        <source>&amp;Export</source>
        <translation>导出(&amp;E)</translation>
    </message>
    <message>
        <source>&amp;Autorenumber</source>
        <translation>自动编号(&amp;A)</translation>
    </message>
    <message>
        <source>Shift and Trace</source>
        <translation>移位和描摹</translation>
    </message>
    <message>
        <source>Edit Shift</source>
        <translation>编辑移位</translation>
    </message>
    <message>
        <source>No Shift</source>
        <translation>不移位</translation>
    </message>
    <message>
        <source>Reset Shift</source>
        <translation>重置移位</translation>
    </message>
    <message>
        <source>Increase max brush thickness</source>
        <translation>增大最大画笔粗细</translation>
    </message>
    <message>
        <source>Decrease max brush thickness</source>
        <translation>减小最大画笔粗细</translation>
    </message>
    <message>
        <source>Increase min brush thickness</source>
        <translation>增大最小画笔粗细</translation>
    </message>
    <message>
        <source>Decrease min brush thickness</source>
        <translation>减小最小画笔粗细</translation>
    </message>
    <message>
        <source>&amp;Binarize...</source>
        <translation>二值化(&amp;B)...</translation>
    </message>
    <message>
        <source>Pick Screen</source>
        <translation>屏幕拾色</translation>
    </message>
    <message>
        <source>&amp;Blend colors</source>
        <translation>混色(&amp;B)</translation>
    </message>
    <message>
        <source>Linetest</source>
        <translation>线稿测试</translation>
    </message>
    <message>
        <source>&amp;Load As Sub-xsheet...</source>
        <translation>加载为子摄影表(&amp;L)...</translation>
    </message>
    <message>
        <source>&amp;Convert File...</source>
        <translation>转换文件(&amp;C)...</translation>
    </message>
    <message>
        <source>Run Script...</source>
        <translation>运行脚本...</translation>
    </message>
    <message>
        <source>Open Script Console...</source>
        <translation>打开脚本控制台...</translation>
    </message>
    <message>
        <source>&amp;Antialias...</source>
        <translation>抗锯齿(&amp;A)...</translation>
    </message>
    <message>
        <source>Adjust Levels...</source>
        <translation>调整色阶...</translation>
    </message>
    <message>
        <source>&amp;Raster Bounding Box</source>
        <translation>光栅边界框(&amp;R)</translation>
    </message>
    <message>
        <source>Link Flipbooks</source>
        <translation>链接翻页书</translation>
    </message>
    <message>
        <source>&amp;Message Center</source>
        <translation>信息中心(&amp;M)</translation>
    </message>
    <message>
        <source>&amp;Cleanup Settings</source>
        <translation>清稿设置(&amp;C)</translation>
    </message>
    <message>
        <source>Plastic Tool</source>
        <translation>塑形工具</translation>
    </message>
    <message>
        <source>Create Mesh</source>
        <translation>创建网格</translation>
    </message>
    <message>
        <source>&amp;Merge Tlv Levels...</source>
        <translation>合并 TLV 层级(&amp;M)...</translation>
    </message>
    <message>
        <source>Adjust Thickness...</source>
        <translation>调整粗细...</translation>
    </message>
    <message>
        <source>Toggle &amp;Opacity Check</source>
        <translation>开关不透明度检查(&amp;O)</translation>
    </message>
    <message>
        <source>&amp;Load Folder...</source>
        <translation>加载文件夹(&amp;L)...</translation>
    </message>
    <message>
        <source>Inks &amp;Only</source>
        <translation>仅显示线(&amp;O)</translation>
    </message>
    <message>
        <source>Next Step</source>
        <translation>下一步</translation>
    </message>
    <message>
        <source>Prev Step</source>
        <translation>上一步</translation>
    </message>
    <message>
        <source>Untitled</source>
        <translation>未命名</translation>
    </message>
    <message>
        <source>Cleanup</source>
        <translation>清稿</translation>
    </message>
    <message>
        <source>PltEdit</source>
        <translation>色板编辑</translation>
    </message>
    <message>
        <source>InknPaint</source>
        <translation>描线上色</translation>
    </message>
    <message>
        <source>Xsheet</source>
        <translation>摄影表</translation>
    </message>
    <message>
        <source>&amp;Load Recent Image Files</source>
        <translation>加载最近的图像文件(&amp;L)</translation>
    </message>
    <message>
        <source>&amp;Clear Recent Flipbook Image List</source>
        <translation>清除最近的翻页书图像列表(&amp;C)</translation>
    </message>
    <message>
        <source>Preview Fx</source>
        <translation>预览特效</translation>
    </message>
    <message>
        <source>&amp;Insert Paste</source>
        <translation>插入粘贴(&amp;I)</translation>
    </message>
    <message>
        <source>&amp;Paste Color &amp;&amp; Name</source>
        <translation>粘贴颜色和名称(&amp;P)</translation>
    </message>
    <message>
        <source>Paste Color</source>
        <translation>粘贴颜色</translation>
    </message>
    <message>
        <source>Paste Name</source>
        <translation>粘贴名称</translation>
    </message>
    <message>
        <source>Get Color from Studio Palette</source>
        <translation>从工作室调色板获取颜色</translation>
    </message>
    <message>
        <source>&amp;Opacity Check</source>
        <translation>不透明度检查(&amp;O)</translation>
    </message>
    <message>
        <source>&amp;Replace Parent Directory...</source>
        <translation>替换父目录(&amp;R)...</translation>
    </message>
    <message>
        <source>1&apos;s</source>
        <translation>1 帧</translation>
    </message>
    <message>
        <source>2&apos;s</source>
        <translation>2 帧</translation>
    </message>
    <message>
        <source>3&apos;s</source>
        <translation>3 帧</translation>
    </message>
    <message>
        <source>4&apos;s</source>
        <translation>4 帧</translation>
    </message>
    <message>
        <source>&amp;Ink#1 Check</source>
        <translation>1#线检查(&amp;I)</translation>
    </message>
    <message>
        <source>Compare to Snapshot</source>
        <translation>和快照比较</translation>
    </message>
    <message>
        <source>Show This Only</source>
        <translation>仅显示此列</translation>
    </message>
    <message>
        <source>Show Selected</source>
        <translation>显示所选列</translation>
    </message>
    <message>
        <source>Show All</source>
        <translation>显示全部</translation>
    </message>
    <message>
        <source>Hide Selected</source>
        <translation>隐藏所选列</translation>
    </message>
    <message>
        <source>Hide All</source>
        <translation>隐藏全部</translation>
    </message>
    <message>
        <source>Toggle Show/Hide</source>
        <translation>切换显示/隐藏</translation>
    </message>
    <message>
        <source>ON This Only</source>
        <translation>仅启用此列</translation>
    </message>
    <message>
        <source>ON Selected</source>
        <translation>启用所选列</translation>
    </message>
    <message>
        <source>ON All</source>
        <translation>启用全部</translation>
    </message>
    <message>
        <source>OFF All</source>
        <translation>关闭全部</translation>
    </message>
    <message>
        <source>OFF Selected</source>
        <translation>关闭所选列</translation>
    </message>
    <message>
        <source>Swap ON/OFF</source>
        <translation>切换启用/关闭</translation>
    </message>
    <message>
        <source>Lock This Only</source>
        <translation>仅锁定此列</translation>
    </message>
    <message>
        <source>Lock Selected</source>
        <translation>锁定所选列</translation>
    </message>
    <message>
        <source>Lock All</source>
        <translation>锁定全部</translation>
    </message>
    <message>
        <source>Unlock Selected</source>
        <translation>解锁所选列</translation>
    </message>
    <message>
        <source>Unlock All</source>
        <translation>解锁全部</translation>
    </message>
    <message>
        <source>Swap Lock/Unlock</source>
        <translation>切换锁定/解锁</translation>
    </message>
    <message>
        <source>Hide Upper Columns</source>
        <translation>隐藏上级列</translation>
    </message>
    <message>
        <source>Ruler Tool</source>
        <translation>标尺工具</translation>
    </message>
    <message>
        <source>Finger Tool</source>
        <translation>涂抹工具</translation>
    </message>
    <message>
        <source>Brush size - Increase max</source>
        <translation>画笔大小 - 增加最大值</translation>
    </message>
    <message>
        <source>Brush size - Decrease max</source>
        <translation>画笔大小 - 减小最大值</translation>
    </message>
    <message>
        <source>Brush size - Increase min</source>
        <translation>画笔大小 - 增加最小值</translation>
    </message>
    <message>
        <source>Brush size - Decrease min</source>
        <translation>画笔大小 - 减小最小值</translation>
    </message>
    <message>
        <source>Brush hardness - Increase</source>
        <translation>画笔硬度 - 增加</translation>
    </message>
    <message>
        <source>Brush hardness - Decrease</source>
        <translation>画笔 - 减小</translation>
    </message>
    <message>
        <source>Mode - Areas</source>
        <translation>模式 - 区域</translation>
    </message>
    <message>
        <source>Mode - Lines</source>
        <translation>模式 - 线</translation>
    </message>
    <message>
        <source>Mode - Lines &amp; Areas</source>
        <translation>模式 - 线和区域</translation>
    </message>
    <message>
        <source>Type - Normal</source>
        <translation>类型 - 标准</translation>
    </message>
    <message>
        <source>Type - Rectangular</source>
        <translation>类型 - 长方形</translation>
    </message>
    <message>
        <source>Type - Freehand</source>
        <translation>类型 - 手绘</translation>
    </message>
    <message>
        <source>Type - Polyline</source>
        <translation>类型 - 多边形</translation>
    </message>
    <message>
        <source>About OpenToonz</source>
        <translation>关于 OpenToonz</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>&amp;About OpenToonz...</source>
        <translation>关于 OpenToonz(&amp;A)...</translation>
    </message>
    <message>
        <source>&amp;ComboViewer</source>
        <translation>组合式查看器(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;History</source>
        <translation>历史记录(&amp;H)</translation>
    </message>
    <message>
        <source>&amp;Save All</source>
        <translation>保存全部(&amp;S)</translation>
    </message>
    <message>
        <source>Toggle Edit in Place</source>
        <translation>显示/隐藏位置中的编辑</translation>
    </message>
    <message>
        <source>Refresh Folder Tree</source>
        <translation>刷新文件夹树</translation>
    </message>
    <message>
        <source>&amp;Save All Levels</source>
        <translation>保存全部层级(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Camera Capture...</source>
        <translation>摄影机拍摄(&amp;C)...</translation>
    </message>
    <message>
        <source>Toggle Maximize Panel</source>
        <translation>开关最大化面板</translation>
    </message>
    <message>
        <source>Toggle Main Window&apos;s Full Screen Mode</source>
        <translation>开关主窗口的全屏模式</translation>
    </message>
    <message>
        <source>Onion Skin Toggle</source>
        <translation>洋葱皮开关</translation>
    </message>
    <message>
        <source>Zero Thick Lines</source>
        <translation>零宽度线</translation>
    </message>
    <message>
        <source>Pressure Sensitivity</source>
        <translation>压力灵敏度</translation>
    </message>
    <message>
        <source>Toggle Link to Studio Palette</source>
        <translation>开关链接到工作室调色版</translation>
    </message>
    <message>
        <source>Remove Reference to Studio Palette</source>
        <translation>删除指向工作室调色版的引用</translation>
    </message>
    <message>
        <source>&amp;Startup Popup...</source>
        <translation>启动窗口(&amp;S)...</translation>
    </message>
    <message>
        <source>&amp;Pencil Test...</source>
        <translation>铅笔测试(&amp;P)...</translation>
    </message>
    <message>
        <source>&amp;Fast Render to MP4</source>
        <translation>快速渲染 MP4(&amp;F)</translation>
    </message>
    <message>
        <source>Record Audio</source>
        <translation>录制音频</translation>
    </message>
    <message>
        <source>Refresh</source>
        <translation>刷新</translation>
    </message>
    <message>
        <source>Toggle XSheet Toolbar</source>
        <translation>开关摄影表工具条</translation>
    </message>
    <message>
        <source>SnapSensitivity</source>
        <translation>吸附灵敏度</translation>
    </message>
    <message>
        <source>&amp;New Vector Level</source>
        <translation>新矢量层级(&amp;N)</translation>
    </message>
    <message>
        <source>New Vector Level</source>
        <translation>新矢量层级</translation>
    </message>
    <message>
        <source>&amp;New Toonz Raster Level</source>
        <translation>新 Toonz 光栅层级(&amp;N)</translation>
    </message>
    <message>
        <source>New Toonz Raster Level</source>
        <translation>新 Toonz 光栅层级</translation>
    </message>
    <message>
        <source>&amp;New Raster Level</source>
        <translation>新光栅层级(&amp;N)</translation>
    </message>
    <message>
        <source>New Raster Level</source>
        <translation>新光栅层级</translation>
    </message>
    <message>
        <source>Alpha Channel</source>
        <translation>透明通道</translation>
    </message>
    <message>
        <source>&amp;Command Bar</source>
        <translation>命令条(&amp;C)</translation>
    </message>
    <message>
        <source>Reframe with Empty Inbetweens...</source>
        <translation>添加空中间画重排帧...</translation>
    </message>
    <message>
        <source>Auto Input Cell Number...</source>
        <translation>自动输入帧格编号...</translation>
    </message>
</context>
<context>
    <name>MatchlinesDialog</name>
    <message>
        <source> Apply Match Lines</source>
        <translation> 应用适配线</translation>
    </message>
    <message>
        <source>Add Match Line Styles</source>
        <translation>添加适配线样式</translation>
    </message>
    <message>
        <source>Use Style: </source>
        <translation>使用样式: </translation>
    </message>
    <message>
        <source>Line Prevalence</source>
        <translation>线流行率</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>应用</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Apply Match Lines</source>
        <translation>应用适配线</translation>
    </message>
    <message>
        <source>Add Match Line Inks</source>
        <translation>添加适配线条的墨迹</translation>
    </message>
    <message>
        <source>Use Ink: </source>
        <translation>使用墨迹: </translation>
    </message>
    <message>
        <source>Ink Usage</source>
        <translation>墨迹使用情况</translation>
    </message>
    <message>
        <source>Line Stacking Order</source>
        <translation>线条堆积顺序</translation>
    </message>
    <message>
        <source>L-Up R-Down</source>
        <translation>左上角 右下角</translation>
    </message>
    <message>
        <source>L-Down R-Up</source>
        <translation>左下角 右上角</translation>
    </message>
    <message>
        <source>Keep
Halftone</source>
        <translation>保留
半调</translation>
    </message>
    <message>
        <source>Fill
Gaps</source>
        <translation>填充
空隙</translation>
    </message>
</context>
<context>
    <name>MenuBarPopup</name>
    <message>
        <source>Customize Menu Bar of Room &quot;%1&quot;</source>
        <translation>自定工作区“%1”的菜单栏</translation>
    </message>
    <message>
        <source>OK</source>
        <translation>确定</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>%1 Menu Bar</source>
        <translation>%1 菜单栏</translation>
    </message>
    <message>
        <source>Menu Items</source>
        <translation>菜单项目</translation>
    </message>
    <message>
        <source>N.B. If you put unique title to submenu, it may not be translated to another language.
N.B. Duplicated commands will be ignored. Only the last one will appear in the menu bar.</source>
        <translation>※ 如果你放置了唯一的标题到子菜单，这可能无法翻译到其他语言。
※ 重复的命令会被忽略，只有最后一个命令能出现在菜单栏中。</translation>
    </message>
</context>
<context>
    <name>MenuBarTree</name>
    <message>
        <source>Insert Menu</source>
        <translation>插入菜单</translation>
    </message>
    <message>
        <source>Insert Submenu</source>
        <translation>插入子菜单</translation>
    </message>
    <message>
        <source>Remove &quot;%1&quot;</source>
        <translation>删除“%1”</translation>
    </message>
    <message>
        <source>New Menu</source>
        <translation>新建菜单</translation>
    </message>
</context>
<context>
    <name>MergeCmappedCommand</name>
    <message>
        <source>It is not possible to merge tlv columns because no column was selected.</source>
        <translation>无法合并 TLV 列，因为未选择任何列。</translation>
    </message>
    <message>
        <source>It is not possible to merge tlv columns because at least two columns have to be selected.</source>
        <translation>无法合并 TLV 列，因为最少要选定两个列。</translation>
    </message>
    <message>
        <source>Merging Tlv Levels...</source>
        <translation>正在合并 TLV 层级...</translation>
    </message>
</context>
<context>
    <name>MergeCmappedDialog</name>
    <message>
        <source>Save in:</source>
        <translation>保存位置:</translation>
    </message>
    <message>
        <source>File Name:</source>
        <translation>文件名:</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>应用</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Ok</source>
        <translation>确定</translation>
    </message>
    <message>
        <source> Merge Tlv Levels</source>
        <translation>合并 TLV 层级</translation>
    </message>
</context>
<context>
    <name>MergeColumnsCommand</name>
    <message>
        <source>It is not possible to execute the merge column command because no column was selected.</source>
        <translation>无法执行合并列的命令，因为未选定任何列。</translation>
    </message>
    <message>
        <source>It is not possible to execute the merge column command  because only one columns is  selected.</source>
        <translation>无法执行合并列的命令，因为只选择了一个列。</translation>
    </message>
</context>
<context>
    <name>MeshifyPopup</name>
    <message>
        <source>A level with the preferred path &quot;%1&quot; already exists.
What do you want to do?</source>
        <translation>首选的路径“%1”中已经存在层级了。
要怎么做？</translation>
    </message>
    <message>
        <source>Delete the old level entirely</source>
        <translation>删除全部旧层级</translation>
    </message>
    <message>
        <source>Keep the old level and overwrite processed frames</source>
        <translation>保留旧层级并覆盖已处理的帧</translation>
    </message>
    <message>
        <source>Choose a different path (%1)</source>
        <translation>选择另一个路径(%1)</translation>
    </message>
    <message>
        <source>Create Mesh</source>
        <translation>创建网格</translation>
    </message>
    <message>
        <source>Mesh Edges Length:</source>
        <translation>网格边线长度:</translation>
    </message>
    <message>
        <source>Rasterization DPI:</source>
        <translation>光栅化 DPI:</translation>
    </message>
    <message>
        <source>Mesh Margin (pixels):</source>
        <translation>网格边距(像素):</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>应用</translation>
    </message>
    <message>
        <source>Mesh Creation in progress...</source>
        <translation>正在创建网格...</translation>
    </message>
    <message>
        <source>Current selection contains mixed image and mesh level types</source>
        <translation>当前选区包含了混合的图像和层级类型</translation>
    </message>
    <message>
        <source>Current selection contains no image or mesh level types</source>
        <translation>当前选区没包含图像或者网格层级类型</translation>
    </message>
</context>
<context>
    <name>MyScannerListener</name>
    <message>
        <source>Scanning in progress: </source>
        <translation>正在扫描: </translation>
    </message>
    <message>
        <source>The scanning process is completed.</source>
        <translation>扫描已经完成。</translation>
    </message>
    <message>
        <source>There was an error during the scanning process.</source>
        <translation>扫描过程中发生了错误。</translation>
    </message>
    <message>
        <source>Please, place the next paper drawing on the scanner flatbed, then select the relevant command in the TWAIN interface.</source>
        <translation>请放置下一张纸到扫描仪的平台上，再从 TWAIN 界面选择相关的命令。</translation>
    </message>
    <message>
        <source>Please, place the next paper drawing on the scanner flatbed, then click the Scan button.</source>
        <translation>请放置下一张纸到扫描仪的平台上，再点按“扫描”按钮。</translation>
    </message>
    <message>
        <source>The pixel type is not supported.</source>
        <translation>不支持的像素类型。</translation>
    </message>
</context>
<context>
    <name>MyViewFinder</name>
    <message>
        <source>Camera is not available</source>
        <translation>摄影机不可用</translation>
    </message>
</context>
<context>
    <name>OutputSettingsPopup</name>
    <message>
        <source>Save in:</source>
        <translation>保存位置:</translation>
    </message>
    <message>
        <source>File Name:</source>
        <translation>文件名:</translation>
    </message>
    <message>
        <source>File Format:</source>
        <translation>文件格式:</translation>
    </message>
    <message>
        <source>Output Camera:</source>
        <translation>输出摄影机:</translation>
    </message>
    <message>
        <source>To Frame:</source>
        <translation>结束帧:</translation>
    </message>
    <message>
        <source>From Frame:</source>
        <translation>开始帧:</translation>
    </message>
    <message>
        <source>Shrink:</source>
        <translation>收缩:</translation>
    </message>
    <message>
        <source>Step:</source>
        <translation>步长:</translation>
    </message>
    <message>
        <source>None</source>
        <translation>无</translation>
    </message>
    <message>
        <source>Fx Schematic Flows</source>
        <translation>特效示意图流程</translation>
    </message>
    <message>
        <source>Fx Schematic Terminal Nodes</source>
        <translation>特效示意图终端节点</translation>
    </message>
    <message>
        <source>Multiple Rendering: </source>
        <translation>多重渲染: </translation>
    </message>
    <message>
        <source>Do stereoscopy</source>
        <translation>制作 3D 效果</translation>
    </message>
    <message>
        <source>Standard</source>
        <translation>标准</translation>
    </message>
    <message>
        <source>Improved</source>
        <translation>改进</translation>
    </message>
    <message>
        <source>High</source>
        <translation>高</translation>
    </message>
    <message>
        <source>Resample Balance:</source>
        <translation>重采样平衡:</translation>
    </message>
    <message>
        <source>Channel Width:</source>
        <translation>通道带宽:</translation>
    </message>
    <message>
        <source>Gamma:</source>
        <translation>伽玛:</translation>
    </message>
    <message>
        <source>Odd (NTSC)</source>
        <translation>奇数(NTSC)</translation>
    </message>
    <message>
        <source>Even (PAL)</source>
        <translation>偶数(PAL)</translation>
    </message>
    <message>
        <source>Dominant Field:</source>
        <translation>优先场:</translation>
    </message>
    <message>
        <source>to FPS:</source>
        <translation>伸缩后的 FPS:</translation>
    </message>
    <message>
        <source>Stretch from FPS:</source>
        <translation>伸缩前的 FPS:</translation>
    </message>
    <message>
        <source>Single</source>
        <translation>单一</translation>
    </message>
    <message>
        <source>Half</source>
        <translation>一半</translation>
    </message>
    <message>
        <source>All</source>
        <translation>全部</translation>
    </message>
    <message>
        <source>Dedicated CPUs:</source>
        <translation>专用 CPU 数:</translation>
    </message>
    <message>
        <source>Large</source>
        <translation>大</translation>
    </message>
    <message>
        <source>Medium</source>
        <translation>中</translation>
    </message>
    <message>
        <source>Small</source>
        <translation>小</translation>
    </message>
    <message>
        <source>Render Tile:</source>
        <translation>渲染区块:</translation>
    </message>
    <message>
        <source>Options</source>
        <translation>选项</translation>
    </message>
    <message>
        <source>Use Sub-Camera</source>
        <translation>使用子摄影机</translation>
    </message>
    <message>
        <source>Apply Shrink to Main Viewer</source>
        <translation>应用收缩到主查看器</translation>
    </message>
    <message>
        <source>Preview Settings</source>
        <translation>预览设置</translation>
    </message>
    <message>
        <source>Output Settings</source>
        <translation>输出设置</translation>
    </message>
    <message>
        <source>8 bits</source>
        <translation>8位</translation>
    </message>
    <message>
        <source>16 bits</source>
        <translation>16位</translation>
    </message>
    <message>
        <source>Columns</source>
        <translation>列</translation>
    </message>
    <message>
        <source>Camera Shift:</source>
        <translation>摄影机移位:</translation>
    </message>
    <message>
        <source>Stereoscopic Render:</source>
        <translation>立体渲染:</translation>
    </message>
    <message>
        <source>Camera Settings</source>
        <translation>摄影机设置</translation>
    </message>
    <message>
        <source>File Settings</source>
        <translation>文件设置</translation>
    </message>
    <message>
        <source>Other Settings</source>
        <translation>其他设置</translation>
    </message>
    <message>
        <source>Add</source>
        <translation>添加</translation>
    </message>
    <message>
        <source>Remove</source>
        <translation>删除</translation>
    </message>
    <message>
        <source>Triangle filter</source>
        <translation>三角形滤镜</translation>
    </message>
    <message>
        <source>Mitchell-Netravali filter</source>
        <translation>Mitchell-Netravali 滤镜</translation>
    </message>
    <message>
        <source>Cubic convolution, a = .5</source>
        <translation></translation>
    </message>
    <message>
        <source>Cubic convolution, a = .75</source>
        <translation></translation>
    </message>
    <message>
        <source>Cubic convolution, a = 1</source>
        <translation></translation>
    </message>
    <message>
        <source>Hann window, rad = 2</source>
        <translation></translation>
    </message>
    <message>
        <source>Hann window, rad = 3</source>
        <translation></translation>
    </message>
    <message>
        <source>Hamming window, rad = 2</source>
        <translation></translation>
    </message>
    <message>
        <source>Hamming window, rad = 3</source>
        <translation></translation>
    </message>
    <message>
        <source>Lanczos window, rad = 2</source>
        <translation></translation>
    </message>
    <message>
        <source>Lanczos window, rad = 3</source>
        <translation></translation>
    </message>
    <message>
        <source>Gaussian convolution</source>
        <translation></translation>
    </message>
    <message>
        <source>Closest Pixel (Nearest Neighbor)</source>
        <translation>最邻近像素</translation>
    </message>
    <message>
        <source>Bilinear</source>
        <translation>两次立方</translation>
    </message>
    <message>
        <source>8 bit</source>
        <translation>8 位</translation>
    </message>
    <message>
        <source>16 bit</source>
        <translation>16 位</translation>
    </message>
    <message>
        <source>Presets:</source>
        <translation>预设:</translation>
    </message>
    <message>
        <source>Frame Start:</source>
        <translation>开始帧:</translation>
    </message>
    <message>
        <source>End:</source>
        <translation>结束帧:</translation>
    </message>
    <message>
        <source>Name:</source>
        <translation>名称:</translation>
    </message>
    <message>
        <source>Frame Rate (linked to Scene Settings):</source>
        <translation>帧速率(和场景设置相连):</translation>
    </message>
    <message>
        <source>  To:</source>
        <translation>转换后:</translation>
    </message>
    <message>
        <source>Multiple Rendering:</source>
        <translation>多重渲染:</translation>
    </message>
    <message>
        <source>Add preset</source>
        <translation>添加预设</translation>
    </message>
    <message>
        <source>Enter the name for the output settings preset.</source>
        <translation>请键入输出设定的预设名称。</translation>
    </message>
    <message>
        <source>Add output settings preset</source>
        <translation>添加输出设置预设</translation>
    </message>
    <message>
        <source>&lt;custom&gt;</source>
        <translation>&lt;自定&gt;</translation>
    </message>
    <message>
        <source>Remove preset</source>
        <translation>删除预设</translation>
    </message>
    <message>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <source>Render</source>
        <translation>渲染</translation>
    </message>
</context>
<context>
    <name>OverwriteDialog</name>
    <message>
        <source>Warning!</source>
        <translation>警告！</translation>
    </message>
    <message>
        <source>Keep existing file</source>
        <translation>保留现有的文件</translation>
    </message>
    <message>
        <source>Overwrite the existing file with the new one</source>
        <translation>用新版覆盖现有文件</translation>
    </message>
    <message>
        <source>Rename the new file adding the suffix</source>
        <translation>添加后缀来重命名新文件</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>应用</translation>
    </message>
    <message>
        <source>Apply to All</source>
        <translation>全部应用</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>File %1 already exists.
What do you want to do?</source>
        <translation>文件 %1 已经存在。
要怎么做？</translation>
    </message>
    <message>
        <source>The suffix field is empty. Please specify a suffix.</source>
        <translation>后缀框是空的。请指定后缀。</translation>
    </message>
    <message>
        <source>File %1 exists as well; please choose a different suffix.</source>
        <translation>文件 %1 已经存在了。请选择不同的后缀。</translation>
    </message>
    <message>
        <source>Level &quot;%1&quot; already exists.

What do you want to do?</source>
        <translation>层级“%1”已经存在。

要怎么做？</translation>
    </message>
    <message>
        <source>File &quot;%1&quot; already exists.
What do you want to do?</source>
        <translation>文件“%1”已经存在。
要怎么做？</translation>
    </message>
    <message>
        <source>Overwrite</source>
        <translation>覆盖</translation>
    </message>
    <message>
        <source>Skip</source>
        <translation>跳过</translation>
    </message>
    <message>
        <source>File &quot;%1&quot; already exists.
Do you want to overwrite it?</source>
        <translation>文件“%1”已经存在。
要覆盖它吗？</translation>
    </message>
</context>
<context>
    <name>PencilTestPopup</name>
    <message>
        <source>Camera Capture</source>
        <translation>摄影机拍摄</translation>
    </message>
    <message>
        <source>Refresh</source>
        <translation>刷新</translation>
    </message>
    <message>
        <source>File</source>
        <translation>文件</translation>
    </message>
    <message>
        <source>Options</source>
        <translation>选项</translation>
    </message>
    <message>
        <source>Save images as they are captured</source>
        <translation>拍摄同时保存图片</translation>
    </message>
    <message>
        <source>Image adjust</source>
        <translation>图像调整</translation>
    </message>
    <message>
        <source>Upside down</source>
        <translation>垂直翻转</translation>
    </message>
    <message>
        <source>Capture white BG</source>
        <translation>拍摄白背景</translation>
    </message>
    <message>
        <source>Display</source>
        <translation>显示</translation>
    </message>
    <message>
        <source>Show onion skin</source>
        <translation>显示洋葱皮</translation>
    </message>
    <message>
        <source>Interval timer</source>
        <translation>间隔计时器</translation>
    </message>
    <message>
        <source>Use interval timer</source>
        <translation>使用间隔计时器</translation>
    </message>
    <message>
        <source>Capture
[Return key]</source>
        <translation>拍摄
[回车键]</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>Next Level</source>
        <translation>下一层级</translation>
    </message>
    <message>
        <source>Camera:</source>
        <translation>摄影机:</translation>
    </message>
    <message>
        <source>Resolution:</source>
        <translation>分辨率:</translation>
    </message>
    <message>
        <source>Name:</source>
        <translation>名称:</translation>
    </message>
    <message>
        <source>Frame:</source>
        <translation>帧:</translation>
    </message>
    <message>
        <source>File Type:</source>
        <translation>文件类型:</translation>
    </message>
    <message>
        <source>Save In:</source>
        <translation>保存位置:</translation>
    </message>
    <message>
        <source>Color type:</source>
        <translation>颜色类型:</translation>
    </message>
    <message>
        <source>Threshold:</source>
        <translation>阈值:</translation>
    </message>
    <message>
        <source>Contrast:</source>
        <translation>对比度:</translation>
    </message>
    <message>
        <source>Brightness:</source>
        <translation>亮度:</translation>
    </message>
    <message>
        <source>BG reduction:</source>
        <translation>背景去除:</translation>
    </message>
    <message>
        <source>Opacity(%):</source>
        <translation>不透明度(%):</translation>
    </message>
    <message>
        <source>Interval(sec):</source>
        <translation>间隔(秒):</translation>
    </message>
    <message>
        <source>No camera found</source>
        <translation>没有找到摄影机</translation>
    </message>
    <message>
        <source>- Select camera -</source>
        <translation>- 选中摄影机 -</translation>
    </message>
    <message>
        <source>Start Capturing
[Return key]</source>
        <translation>开始拍摄
[回车键]</translation>
    </message>
    <message>
        <source>Stop Capturing
[Return key]</source>
        <translation>停止拍摄
[回车键]</translation>
    </message>
    <message>
        <source>No level name specified: please choose a valid level name</source>
        <translation>未指定层级名称: 请选择一个有效的层级名称</translation>
    </message>
    <message>
        <source>Folder %1 doesn&apos;t exist.
Do you want to create it?</source>
        <translation>文件夹 %1不存在。
要创建它吗？</translation>
    </message>
    <message>
        <source>Unable to create</source>
        <translation>无法创建</translation>
    </message>
    <message>
        <source>The level name specified is already used: please choose a different level name.</source>
        <translation>所指定的层级名称已经被使用: 请选择一个不同的层级名称。</translation>
    </message>
    <message>
        <source>The save in path specified does not match with the existing level.</source>
        <translation>指定的保存路径和已有层级补匹配。</translation>
    </message>
    <message>
        <source>The captured image size does not match with the existing level.</source>
        <translation>所拍摄的图像大小和已有层级不匹配。</translation>
    </message>
    <message>
        <source>File %1 does exist.
Do you want to overwrite it?</source>
        <translation>文件 %1 已经存在。
您要覆盖它吗?</translation>
    </message>
    <message>
        <source>Failed to load %1.</source>
        <translation>加载 %1 失败。</translation>
    </message>
    <message>
        <source>Video Capture Filter Settings...</source>
        <translation>视频拍摄滤镜设置...</translation>
    </message>
    <message>
        <source>Pencil Test</source>
        <translation>铅笔测试</translation>
    </message>
    <message>
        <source>Capture</source>
        <translation>拍摄</translation>
    </message>
    <message>
        <source>Load Selected Image</source>
        <translation>加载选中的图像</translation>
    </message>
    <message>
        <source>Subfolder</source>
        <translation>子文件夹</translation>
    </message>
    <message>
        <source>No image selected.  Please select an image in the Xsheet.</source>
        <translation>没有选择图像。请在摄影表中选一个图像。</translation>
    </message>
    <message>
        <source>The selected image is not in a raster level.</source>
        <translation>选中的图像不在光栅层级。</translation>
    </message>
    <message>
        <source>The selected image size does not match the current camera settings.</source>
        <translation>选中的图像大小和当前摄影机设置不匹配。</translation>
    </message>
    <message>
        <source>No</source>
        <comment>frame id</comment>
        <translation>否</translation>
    </message>
    <message>
        <source>Previous Level</source>
        <translation>前一个层级</translation>
    </message>
    <message>
        <source>UNDEFINED WARNING</source>
        <translation>为定义警告</translation>
    </message>
    <message>
        <source>The level is not registered in the scene, but exists in the file system.</source>
        <translation>该层级没在场景中注册，但存在于文件系统中。</translation>
    </message>
    <message>
        <source>WARNING : Image size mismatch. The saved image size is %1 x %2.</source>
        <translation>警告: 图像大小不匹配。已保存的图像大小是 %1 x %2。</translation>
    </message>
    <message>
        <source>WARNING</source>
        <translation>警告</translation>
    </message>
    <message>
        <source>
Frame %1 exists.</source>
        <translation>帧 %1 已存在。</translation>
    </message>
    <message>
        <source>
Frames %1 exist.</source>
        <translation>帧  %1 已存在。</translation>
    </message>
    <message>
        <source>OVERWRITE 1 of</source>
        <translation type="unfinished">覆盖 1</translation>
    </message>
    <message>
        <source>ADD to</source>
        <translation>添加到</translation>
    </message>
    <message>
        <source> %1 frame</source>
        <translation>%1 帧</translation>
    </message>
    <message>
        <source> %1 frames</source>
        <translation>%1 帧</translation>
    </message>
    <message>
        <source>The level will be newly created.</source>
        <translation>层级将被创建。</translation>
    </message>
    <message>
        <source>NEW</source>
        <translation>新建</translation>
    </message>
    <message>
        <source>The level is already registered in the scene.</source>
        <translation>层级已在场景中注册。</translation>
    </message>
    <message>
        <source>
NOTE : The level is not saved.</source>
        <translation>注: 层级未保存。</translation>
    </message>
    <message>
        <source>
WARNING : Failed to get image size of the existing level %1.</source>
        <translation>警告: 获取已有层级 %1 的图像大小失败。</translation>
    </message>
    <message>
        <source>
WARNING : Image size mismatch. The existing level size is %1 x %2.</source>
        <translation>警告: 图像大小不匹配。已有层级大小是 %1 x %2。</translation>
    </message>
    <message>
        <source>WARNING : Level name conflicts. There already is a level %1 in the scene with the path
          %2.</source>
        <translation>警告: 层级名冲突。位置 %2 的场景中已有名为 %1 的层级。</translation>
    </message>
    <message>
        <source>
WARNING : Image size mismatch. The size of level with the same name is is %1 x %2.</source>
        <translation>警告: 图像大小不匹配。同名层级的大小是 %1 x %2。</translation>
    </message>
    <message>
        <source>WARNING : Level path conflicts. There already is a level with the path %1
          in the scene with the name %2.</source>
        <translation>警告: 层级路径冲突。位置 %1 的场景中已有名为 %2 的层级。</translation>
    </message>
    <message>
        <source>
WARNING : Image size mismatch. The size of level with the same path is %1 x %2.</source>
        <translation>警告: 图像大小不匹配。同位置的层级大小是 %1 x %2。</translation>
    </message>
    <message>
        <source>
WARNING : Image size mismatch. The saved image size is %1 x %2.</source>
        <translation>警告: 图像大小不匹配。保存的图像大小是 %1 x %2。</translation>
    </message>
    <message>
        <source>Color</source>
        <translation>彩色</translation>
    </message>
    <message>
        <source>Grayscale</source>
        <translation>灰度</translation>
    </message>
    <message>
        <source>Black &amp; White</source>
        <translation>黑白</translation>
    </message>
    <message>
        <source>WARNING : Level name conflicts. There already is a level %1 in the scene with the path                        
          %2.</source>
        <translation>警告: 层级名字冲突。在下面路径的场景中已经有名为 %1 的层级
         %2。</translation>
    </message>
    <message>
        <source>WARNING : Level path conflicts. There already is a level with the path %1                        
          in the scene with the name %2.</source>
        <translation>警告: 层级路径冲突。在名为 %2 的场景中，已经有个层级位于路径 %1 上。</translation>
    </message>
</context>
<context>
    <name>PencilTestSaveInFolderPopup</name>
    <message>
        <source>Create Subfolder</source>
        <translation>创建子文件夹</translation>
    </message>
    <message>
        <source>Infomation</source>
        <translation>信息</translation>
    </message>
    <message>
        <source>Subfolder Name</source>
        <translation>子文件夹名</translation>
    </message>
    <message>
        <source>Auto Format:</source>
        <translation>自动格式:</translation>
    </message>
    <message>
        <source>Show This on Launch of the Camera Capture</source>
        <translation>显示到摄影机拍摄启动窗口</translation>
    </message>
    <message>
        <source>OK</source>
        <translation>确定</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>C- + Sequence + Scene</source>
        <translation>C- + 序列 + 场景</translation>
    </message>
    <message>
        <source>Sequence + Scene</source>
        <translation>序列 + 场景</translation>
    </message>
    <message>
        <source>Episode + Sequence + Scene</source>
        <translation>片段 + 序列 + 场景</translation>
    </message>
    <message>
        <source>Project + Episode + Sequence + Scene</source>
        <translation>项目 + 片段 + 序列 + 场景</translation>
    </message>
    <message>
        <source>Save In:</source>
        <translation>保存位置:</translation>
    </message>
    <message>
        <source>Project:</source>
        <translation>项目:</translation>
    </message>
    <message>
        <source>Episode:</source>
        <translation>判断:</translation>
    </message>
    <message>
        <source>Sequence:</source>
        <translation>序列:</translation>
    </message>
    <message>
        <source>Scene:</source>
        <translation>场景:</translation>
    </message>
    <message>
        <source>Subfolder Name:</source>
        <translation>子文件夹名:</translation>
    </message>
    <message>
        <source>Subfolder name should not be empty.</source>
        <translation>子文件名不能空。</translation>
    </message>
    <message>
        <source>Subfolder name should not contain following characters:  * . &quot; / \ [ ] : ; | = , </source>
        <translation>子文件夹名不能包含如下字符:  * . &quot; / \ [ ] : ; | = , </translation>
    </message>
    <message>
        <source>Folder %1 already exists.</source>
        <translation>文件夹 %1 已经存在。</translation>
    </message>
    <message>
        <source>It is not possible to create the %1 folder.</source>
        <translation>无法创建 %1 文件夹。</translation>
    </message>
    <message>
        <source>Set As Default</source>
        <translation>保存未默认</translation>
    </message>
    <message>
        <source>Set the current &quot;Save In&quot; path as the default.</source>
        <translation>设置当前“保存位置”为默认。</translation>
    </message>
</context>
<context>
    <name>PltGizmoPopup</name>
    <message>
        <source>Palette Gizmo</source>
        <translation>调色板装置</translation>
    </message>
    <message>
        <source>Luminance:</source>
        <translation>明度:</translation>
    </message>
    <message>
        <source>Saturation:</source>
        <translation>饱和度:</translation>
    </message>
    <message>
        <source>Hue:</source>
        <translation>色相:</translation>
    </message>
    <message>
        <source>Transparency:</source>
        <translation>透明度:</translation>
    </message>
    <message>
        <source>Fade to Color</source>
        <translation>淡化至颜色</translation>
    </message>
    <message>
        <source>              Color:</source>
        <translation>              颜色:</translation>
    </message>
    <message>
        <source>Fade</source>
        <translation>淡化</translation>
    </message>
    <message>
        <source>Blend</source>
        <translation>混合</translation>
    </message>
    <message>
        <source>Full Matte</source>
        <translation>完全不透明</translation>
    </message>
    <message>
        <source>Zero Matte</source>
        <translation>全透明</translation>
    </message>
    <message>
        <source>Scale (%)</source>
        <translation>缩放(%)</translation>
    </message>
    <message>
        <source>Shift (value)</source>
        <translation>移位(数值)</translation>
    </message>
    <message>
        <source>Value</source>
        <translation>明度</translation>
    </message>
    <message>
        <source>Saturation</source>
        <translation>饱和度</translation>
    </message>
    <message>
        <source>Hue</source>
        <translation>色相</translation>
    </message>
    <message>
        <source>Matte</source>
        <translation>Alpha</translation>
    </message>
    <message>
        <source>Color</source>
        <translation>色彩</translation>
    </message>
    <message>
        <source>Full Alpha</source>
        <translation>全透明度</translation>
    </message>
    <message>
        <source>Zero Alpha</source>
        <translation>零透明度</translation>
    </message>
    <message>
        <source>Alpha</source>
        <translation>透明度</translation>
    </message>
</context>
<context>
    <name>PreferencesPopup</name>
    <message>
        <source>Preferences</source>
        <translation>首选项</translation>
    </message>
    <message>
        <source>General</source>
        <translation>常规</translation>
    </message>
    <message>
        <source>Use Default Viewer for Movie Formats</source>
        <translation>使用默认播放器播放视频格式</translation>
    </message>
    <message>
        <source>Minimize Raster Memory Fragmentation*</source>
        <translation>最小化光栅内存碎片*</translation>
    </message>
    <message>
        <source>Save Automatically Every Minutes</source>
        <translation>自动保存间隔(分钟)</translation>
    </message>
    <message>
        <source>Backup Animation Levels when Saving</source>
        <translation>保存时备份动画层级</translation>
    </message>
    <message>
        <source>Cell-dragging Behaviour:</source>
        <translation>拖动帧格的行为:</translation>
    </message>
    <message>
        <source>Interface</source>
        <translation>界面</translation>
    </message>
    <message>
        <source>Style:</source>
        <translation>界面样式:</translation>
    </message>
    <message>
        <source>Open Flipbook after Rendering</source>
        <translation>渲染后打开翻页书</translation>
    </message>
    <message>
        <source>Unit:</source>
        <translation>单位:</translation>
    </message>
    <message>
        <source>Camera Unit:</source>
        <translation>摄影机单位:</translation>
    </message>
    <message>
        <source>Flipbook Shrink:</source>
        <translation>翻页书收缩:</translation>
    </message>
    <message>
        <source>Step:</source>
        <translation>步长:</translation>
    </message>
    <message>
        <source>Height*:</source>
        <translation>高度*:</translation>
    </message>
    <message>
        <source>Loading</source>
        <translation>加载</translation>
    </message>
    <message>
        <source>Expose Loaded Levels in Xsheet</source>
        <translation>在摄影表中公开已加载的层级</translation>
    </message>
    <message>
        <source>Create Sub-folder when Importing Sub-xsheet</source>
        <translation>当导入子摄影表时创建子文件夹</translation>
    </message>
    <message>
        <source>Drawing</source>
        <translation>绘图</translation>
    </message>
    <message>
        <source>Keep Original Cleaned Up Drawings As Backup</source>
        <translation>保留清过稿的原始画稿作为备份</translation>
    </message>
    <message>
        <source>Animation</source>
        <translation>动画</translation>
    </message>
    <message>
        <source>Default Interpolation: </source>
        <translation>默认插值法: </translation>
    </message>
    <message>
        <source>Linear</source>
        <translation>线性</translation>
    </message>
    <message>
        <source>Speed In / Speed Out</source>
        <translation>速入/速出</translation>
    </message>
    <message>
        <source>Ease In / Ease Out</source>
        <translation>缓入/缓出</translation>
    </message>
    <message>
        <source>Ease In / Ease Out %</source>
        <translation>缓入/缓出(%)</translation>
    </message>
    <message>
        <source>Animation Step:</source>
        <translation>动画步长:</translation>
    </message>
    <message>
        <source>Preview</source>
        <translation>预览</translation>
    </message>
    <message>
        <source>Blank Frames:</source>
        <translation>空白帧数:</translation>
    </message>
    <message>
        <source>Blank Frames Color:</source>
        <translation>空白帧颜色:</translation>
    </message>
    <message>
        <source>Display in a New Flipbook Window</source>
        <translation>在新翻页书窗口中显示</translation>
    </message>
    <message>
        <source>Rewind after Playback</source>
        <translation>回放完了倒回开头</translation>
    </message>
    <message>
        <source>Onion Skin</source>
        <translation>洋葱皮</translation>
    </message>
    <message>
        <source>   Following Frames Correction: </source>
        <translation>   后面帧的颜色: </translation>
    </message>
    <message>
        <source>   Previous  Frames Correction: </source>
        <translation>   前面帧的颜色: </translation>
    </message>
    <message>
        <source>Display Lines Only </source>
        <translation>仅显示线条</translation>
    </message>
    <message>
        <source>Version Control</source>
        <translation>版本控制</translation>
    </message>
    <message>
        <source>Automatically Refresh Folder Contents</source>
        <translation>自动刷新文件夹内容</translation>
    </message>
    <message>
        <source>Cells Only</source>
        <translation>仅帧格</translation>
    </message>
    <message>
        <source>Cells and Column Data</source>
        <translation>帧格和列数据</translation>
    </message>
    <message>
        <source>Language*:</source>
        <translation>语言*:</translation>
    </message>
    <message>
        <source>Undo Memory Size (MB):</source>
        <translation>分配给撤消的内存大小(MB):</translation>
    </message>
    <message>
        <source>Render Task Chunk Size:</source>
        <translation>渲染任务的块大小:</translation>
    </message>
    <message>
        <source>Show Info in Rendered Frames</source>
        <translation>在渲染好的帧中显示信息</translation>
    </message>
    <message>
        <source>*Changes will take effect the next time you run Toonz</source>
        <translation>* 更改将在下次启动 OpenToonz 时生效</translation>
    </message>
    <message>
        <source>cm</source>
        <translation>cm</translation>
    </message>
    <message>
        <source>mm</source>
        <translation>mm</translation>
    </message>
    <message>
        <source>inch</source>
        <translation>inch</translation>
    </message>
    <message>
        <source>field</source>
        <translation>field</translation>
    </message>
    <message>
        <source>Xsheet Autopan during Playback</source>
        <translation>回放时自动卷动摄影表</translation>
    </message>
    <message>
        <source>Level Strip Frames Width*:</source>
        <translation>层级条的帧数宽*:</translation>
    </message>
    <message>
        <source>Capture</source>
        <translation>录像</translation>
    </message>
    <message>
        <source>        Frame Rate:</source>
        <translation>        帧速率:</translation>
    </message>
    <message>
        <source>Scan File Format:</source>
        <translation>扫描文件格式:</translation>
    </message>
    <message>
        <source>Width:</source>
        <translation>宽度:</translation>
    </message>
    <message>
        <source>Height:</source>
        <translation>高度:</translation>
    </message>
    <message>
        <source>DPI:</source>
        <translation>DPI:</translation>
    </message>
    <message>
        <source>Minimize Savebox after Editing</source>
        <translation>编辑之后最小化保存框</translation>
    </message>
    <message>
        <source>Use the TLV Savebox to Limit Filling Operations</source>
        <translation>使用 TLV 保存框来限制填充操作</translation>
    </message>
    <message>
        <source>Paper Thickness:</source>
        <translation>纸张厚度:</translation>
    </message>
    <message>
        <source>Enable Version Control *</source>
        <translation>启用版本控制*</translation>
    </message>
    <message>
        <source>Default Level Type:</source>
        <translation>默认层级类型:</translation>
    </message>
    <message>
        <source>Toonz Vector Level</source>
        <translation>Toonz 矢量层级</translation>
    </message>
    <message>
        <source>Toonz Raster Level</source>
        <translation>Toonz 光栅层级</translation>
    </message>
    <message>
        <source>Raster Level</source>
        <translation>光栅层级</translation>
    </message>
    <message>
        <source>Autocreation:</source>
        <translation>自动创建:</translation>
    </message>
    <message>
        <source>Transparency Check</source>
        <translation>透明度检查</translation>
    </message>
    <message>
        <source>   Ink Color on White Bg: </source>
        <translation>   白色背景上的描线颜色: </translation>
    </message>
    <message>
        <source>   Ink Color on Black Bg: </source>
        <translation>   黑色背景上的描线颜色: </translation>
    </message>
    <message>
        <source> Paint Color: </source>
        <translation> 上色颜色: </translation>
    </message>
    <message>
        <source>Fit to Flipbook</source>
        <translation>适合翻页书</translation>
    </message>
    <message>
        <source>New Level Format</source>
        <translation>新层级格式</translation>
    </message>
    <message>
        <source>Assign the new level format name:</source>
        <translation>分配新层级的格式名称:</translation>
    </message>
    <message>
        <source>New Format</source>
        <translation>新建格式</translation>
    </message>
    <message>
        <source>Level Settings by File Format:</source>
        <translation>各文件格式的层级设置:</translation>
    </message>
    <message>
        <source>Edit</source>
        <translation>编辑</translation>
    </message>
    <message>
        <source>Xsheet</source>
        <translation>摄影表</translation>
    </message>
    <message>
        <source>Visualization</source>
        <translation>可视化</translation>
    </message>
    <message>
        <source>Show Lines with Thickness 0</source>
        <translation>显示粗细为 0 的线条</translation>
    </message>
    <message>
        <source>Antialiased region boundaries</source>
        <translation>抗锯齿范围边界线</translation>
    </message>
    <message>
        <source>Next/Previous Step Frames:</source>
        <translation>前一步/后一步的帧:</translation>
    </message>
    <message>
        <source>Ignore Alpha Channel on Levels in Column 1</source>
        <translation>忽略第一列中的层级 Alpha 通道</translation>
    </message>
    <message>
        <source>pixel</source>
        <translation>像素</translation>
    </message>
    <message>
        <source>Minimize Raster Memory Fragmentation *</source>
        <translation>最小化光栅内存碎片*</translation>
    </message>
    <message>
        <source>Replace Level after SaveLevelAs command</source>
        <translation>执行另存层级命令后替换层级</translation>
    </message>
    <message>
        <source>* Changes will take effect the next time you run Toonz</source>
        <translation>* 更改将在下次启动 OpenToonz 时生效</translation>
    </message>
    <message>
        <source>Move Current Frame by Clicking on Xsheet / Numerical Columns Cell Area</source>
        <translation>在“摄影表/数字列”的帧格区域点按时，改变当前帧</translation>
    </message>
    <message>
        <source>Enable Actual Pixel View on Scene Editing Mode</source>
        <translation>在场景编辑模式中启用实际像素视图</translation>
    </message>
    <message>
        <source>Display Level Name on Each Marker</source>
        <translation>在每个标记器上显示层级名称</translation>
    </message>
    <message>
        <source>Show Raster Images Darken Blended in Camstand View</source>
        <translation>在摄影机位视图中用“变暗”混合来显示光栅图像</translation>
    </message>
    <message>
        <source>Show &quot;ABC&quot; Appendix to the Frame Number in Xsheet Cell</source>
        <translation>在摄影表帧格的帧编号后面显示“ABC”之类的附加字母</translation>
    </message>
    <message>
        <source>Automatically Remove Scene Number from Loaded Level Name</source>
        <translation>自动从加载的层级名称中移除场景编号</translation>
    </message>
    <message>
        <source>Multi Layer Style Picker : Switch Levels by Picking</source>
        <translation>多层样式拾取器: 拾取时切换层级</translation>
    </message>
    <message>
        <source>Onion Skin ON</source>
        <translation>启用洋葱皮</translation>
    </message>
    <message>
        <source>Enable Version Control*</source>
        <translation>启用版本控制*</translation>
    </message>
    <message>
        <source>Category</source>
        <translation>类别</translation>
    </message>
    <message>
        <source>Undo Memory Size (MB)</source>
        <translation>分配给撤消的内存大小(MB)</translation>
    </message>
    <message>
        <source>Icon Size *</source>
        <translation>图标尺寸*</translation>
    </message>
    <message>
        <source>X</source>
        <translation>X</translation>
    </message>
    <message>
        <source>Viewer  Shrink</source>
        <translation>查看器的收缩</translation>
    </message>
    <message>
        <source>Step</source>
        <translation>步长</translation>
    </message>
    <message>
        <source>Viewer BG Color</source>
        <translation>查看器背景色</translation>
    </message>
    <message>
        <source>Preview BG Color</source>
        <translation>预览背景色</translation>
    </message>
    <message>
        <source>ChessBoard Color 1</source>
        <translation>棋盘色 1</translation>
    </message>
    <message>
        <source>Chessboard Color 2</source>
        <translation>棋盘色 2</translation>
    </message>
    <message>
        <source>Viewer Zoom Center</source>
        <translation>查看器的缩放中心</translation>
    </message>
    <message>
        <source>Language *:</source>
        <translation>语言*:</translation>
    </message>
    <message>
        <source>Default TLV Caching Behavior</source>
        <translation>默认 TLV 缓存行为</translation>
    </message>
    <message>
        <source>Column Icon</source>
        <translation>列图标</translation>
    </message>
    <message>
        <source>  Height:</source>
        <translation>高度:</translation>
    </message>
    <message>
        <source>Default Interpolation:</source>
        <translation>默认插值法:</translation>
    </message>
    <message>
        <source>Following Frames Correction:</source>
        <translation>后面帧的颜色:</translation>
    </message>
    <message>
        <source>Previous  Frames Correction:</source>
        <translation>前面帧的颜色:</translation>
    </message>
    <message>
        <source>Ink Color on White Bg:</source>
        <translation>白色背景上的描线颜色:</translation>
    </message>
    <message>
        <source>Ink Color on Black Bg:</source>
        <translation>黑色背景上的描线颜色:</translation>
    </message>
    <message>
        <source>Paint Color:</source>
        <translation>上色颜色:</translation>
    </message>
    <message>
        <source>On Demand</source>
        <translation>按需</translation>
    </message>
    <message>
        <source>All Icons</source>
        <translation>所有图标</translation>
    </message>
    <message>
        <source>All Icons &amp; Images</source>
        <translation>所有图标和图像</translation>
    </message>
    <message>
        <source>At Once</source>
        <translation>同时</translation>
    </message>
    <message>
        <source>Pick Every Colors as Different Styles</source>
        <translation>将每个颜色拾取为不同的样式</translation>
    </message>
    <message>
        <source>Integrate Similar Colors as One Style</source>
        <translation>将近似颜色整合为同一样式</translation>
    </message>
    <message>
        <source>Palette Type on Loading Raster Image as Color Model</source>
        <translation>将光栅图像加载为色彩模型的调色板类型</translation>
    </message>
    <message>
        <source>Mouse Cursor</source>
        <translation>鼠标光标</translation>
    </message>
    <message>
        <source>Viewer Center</source>
        <translation>查看器中心</translation>
    </message>
    <message>
        <source>Disabled</source>
        <translation>禁用</translation>
    </message>
    <message>
        <source>Enabled</source>
        <translation>启用</translation>
    </message>
    <message>
        <source>Use Xsheet as Animation Sheet</source>
        <translation>使用摄影表作为动画表</translation>
    </message>
    <message>
        <source>Replace Toonz Level after SaveLevelAs command</source>
        <translation>执行另存层级命令后替换 Toonz 层级</translation>
    </message>
    <message>
        <source>Show Keyframes on Cell Area</source>
        <translation>在帧格上显示关键帧</translation>
    </message>
    <message>
        <source>Rooms *:</source>
        <translation>工作区*:</translation>
    </message>
    <message>
        <source>Save Automatically</source>
        <translation>自动保存</translation>
    </message>
    <message>
        <source>Automatically Save the Scene File</source>
        <translation>自动保存场景文件</translation>
    </message>
    <message>
        <source>Automatically Save Non-Scene Files</source>
        <translation>自动保存非场景文件</translation>
    </message>
    <message>
        <source>My Documents/OpenToonz*</source>
        <translation>我的文档/OpenToonz*</translation>
    </message>
    <message>
        <source>Desktop/OpenToonz*</source>
        <translation>桌面/OpenToonz*</translation>
    </message>
    <message>
        <source>Stuff Folder*</source>
        <translation>Stuff 文件夹</translation>
    </message>
    <message>
        <source>Custom*</source>
        <translation>自定</translation>
    </message>
    <message>
        <source>Custom Project Path(s): </source>
        <translation>自定项目路径:</translation>
    </message>
    <message>
        <source>Advanced: Multiple paths can be separated by ** (No Spaces)</source>
        <translation>注: 多个路径可以用**分开(无空格)</translation>
    </message>
    <message>
        <source>All imported images will use the same DPI</source>
        <translation>全部导入的图像采用相同 DPI</translation>
    </message>
    <message>
        <source>Import/Export</source>
        <translation>导入/导出</translation>
    </message>
    <message>
        <source>Show Onion Skin During Playback</source>
        <translation>回放时显示洋葱皮</translation>
    </message>
    <message>
        <source>Interval(Minutes): </source>
        <translation>间隔(分钟):</translation>
    </message>
    <message>
        <source>Additional Project Locations</source>
        <translation>附加项目位置</translation>
    </message>
    <message>
        <source>Pixels Only:</source>
        <translation>仅像素:</translation>
    </message>
    <message>
        <source>Rooms*:</source>
        <translation>工作区*:</translation>
    </message>
    <message>
        <source>OpenToonz can use FFmpeg for additional file formats.</source>
        <translation>OpenToonz可以使用 FFmpeg 处理附加文件格式。</translation>
    </message>
    <message>
        <source>FFmpeg is not bundled with OpenToonz</source>
        <translation>FFmpeg 并没有和 OpenToonz 一起打包。</translation>
    </message>
    <message>
        <source>NOTE: This is an experimental feature.</source>
        <translation>注: 这是体验版的功能。</translation>
    </message>
    <message>
        <source>Please SAVE YOUR WORK before exporting in MP4, WEBM, or GIF format.</source>
        <translation>请在导出 MP4，WEBM 或 GIF 格式之前保存您的工作。</translation>
    </message>
    <message>
        <source>Please provide the path where FFmpeg is located on your computer.</source>
        <translation>请提供您电脑上 FFmpeg 的存放路径。</translation>
    </message>
    <message>
        <source>FFmpeg Path: </source>
        <translation>FFmpeg 路径:</translation>
    </message>
    <message>
        <source>Number of seconds to wait for FFmpeg to complete processing the output:</source>
        <translation>等待 FFmpeg 完成输出工作的秒数:</translation>
    </message>
    <message>
        <source>Note: FFmpeg begins working once all images have been processed.</source>
        <translation>注: 一旦所有图像处理完成后， FFmpeg 开始工作。</translation>
    </message>
    <message>
        <source>FFmpeg Timeout:</source>
        <translation>FFmpeg 暂停:</translation>
    </message>
    <message>
        <source>Show Startup Window when OpenToonz Starts</source>
        <translation>当 OpenToonz 启动时显示启动窗口</translation>
    </message>
    <message>
        <source>Numpad keys are assigned to the following commands.
Is it OK to release these shortcuts?</source>
        <translation>小键盘键被分配给了下列命令。可以释放这些快捷键吗?</translation>
    </message>
    <message>
        <source>OK</source>
        <translation>确定</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Use Numpad and Tab keys for Switching Styles</source>
        <translation>使用小键盘和 Tab 键切换样式</translation>
    </message>
    <message>
        <source>Use Arrow Key to Shift Cell Selection</source>
        <translation>使用箭头键转移帧格选择</translation>
    </message>
    <message>
        <source>Enable to Input Cells without Double Clicking</source>
        <translation>启用不双击情况下置入帧格</translation>
    </message>
    <message>
        <source>Please indicate where you would like exports from Fast Render(MP4) to go.</source>
        <translation>请指示快速渲染(MP4)的输出路径。</translation>
    </message>
    <message>
        <source>Fast Render Path: </source>
        <translation>快速输出路径:</translation>
    </message>
    <message>
        <source>Watch File System and Update File Browser Automatically</source>
        <translation>监视文件系统并自动更新文件浏览器</translation>
    </message>
    <message>
        <source>Use Camera DPI for All Imported Images</source>
        <translation>对所有导入的图像都使用摄影机 DPI</translation>
    </message>
    <message>
        <source>Show Toolbar in the XSheet </source>
        <translation>在摄影表显示工具条</translation>
    </message>
    <message>
        <source>Expand Function Editor Header to Match XSheet Toolbar Height (Requires Restart)</source>
        <translation>扩展功能编辑器以适配到摄影表工具条的高度(需要重启程序)</translation>
    </message>
    <message>
        <source>Show Column Numbers in Column Headers</source>
        <translation>在列头部显示列编号</translation>
    </message>
    <message>
        <source>Always ask before loading or importing</source>
        <translation>加载和导入前总是询问</translation>
    </message>
    <message>
        <source>Always import the file to the current project</source>
        <translation>总是导入文件到当前项目</translation>
    </message>
    <message>
        <source>Always load the file from the current location</source>
        <translation>总是从当前位置加载文件</translation>
    </message>
    <message>
        <source>Strokes</source>
        <translation>描边</translation>
    </message>
    <message>
        <source>Guides</source>
        <translation>参考线</translation>
    </message>
    <message>
        <source>All</source>
        <translation>全部</translation>
    </message>
    <message>
        <source>Default File Import Behavior:</source>
        <translation>默认文件导入行为:</translation>
    </message>
    <message>
        <source>Default TLV Caching Behavior:</source>
        <translation>默认 TLV 缓存行为:</translation>
    </message>
    <message>
        <source>Column Icon:</source>
        <translation>列图标:</translation>
    </message>
    <message>
        <source>Palette Type on Loading Raster Image as Color Model:</source>
        <translation>加载光栅图像时把调色板类型当作颜色模型:</translation>
    </message>
    <message>
        <source>Vector Snapping:</source>
        <translation>矢量吸附:</translation>
    </message>
    <message>
        <source>New Levels Default to the Current Camera Size</source>
        <translation>新建层级默认到当前摄影机大小</translation>
    </message>
    <message>
        <source>Enable OpenToonz Commands&apos; Shortcut Keys While Renaming Cell</source>
        <translation>重命名帧格时启用 OpenToonz 命令快捷键</translation>
    </message>
    <message>
        <source>Font *:</source>
        <translation>字体 *:</translation>
    </message>
    <message>
        <source>Font Weight *:</source>
        <translation>字体粗细 *:</translation>
    </message>
    <message>
        <source>Life is too short for Comic Sans</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Good luck.  You&apos;re on your own from here.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Arrow Markers</source>
        <translation>箭头标记</translation>
    </message>
    <message>
        <source>Animated Guide</source>
        <translation>动态指引</translation>
    </message>
    <message>
        <source>Vector Guided Style:</source>
        <translation>矢量绘制指引样式:</translation>
    </message>
</context>
<context>
    <name>PreferencesPopup::FormatProperties</name>
    <message>
        <source>Level Settings by File Format</source>
        <translation>各文件格式的层级设置</translation>
    </message>
    <message>
        <source>Name:</source>
        <translation>名称:</translation>
    </message>
    <message>
        <source>Regular Expression:</source>
        <translation>正则表达式:</translation>
    </message>
    <message>
        <source>Priority</source>
        <translation>优先级</translation>
    </message>
</context>
<context>
    <name>Previewer</name>
    <message>
        <source>The file name cannot be empty or contain any of the following characters:(new line)  \ / : * ? &quot;  |</source>
        <translation>文件名不能为空也不能包含如下的任一字符:
\ / : * ? &quot;  |</translation>
    </message>
    <message>
        <source>File %1 already exists.
Do you want to overwrite it?</source>
        <translation>文件 %1 已经存在。
要覆盖它吗？</translation>
    </message>
</context>
<context>
    <name>ProcessingTab</name>
    <message>
        <source>Line Processing:</source>
        <translation>线条处理:</translation>
    </message>
    <message>
        <source>None</source>
        <translation>无</translation>
    </message>
    <message>
        <source>Greyscale</source>
        <translation>灰度</translation>
    </message>
    <message>
        <source>Color</source>
        <translation>色彩</translation>
    </message>
    <message>
        <source>Antialias:</source>
        <translation>抗锯齿:</translation>
    </message>
    <message>
        <source>Standard</source>
        <translation>标准</translation>
    </message>
    <message>
        <source>Morphological</source>
        <translation>形态抗锯齿</translation>
    </message>
    <message>
        <source>Autoadjust:</source>
        <translation>自动调整:</translation>
    </message>
    <message>
        <source>Sharpness:</source>
        <translation>锐利度:</translation>
    </message>
    <message>
        <source>Despeckling:</source>
        <translation>去斑:</translation>
    </message>
    <message>
        <source>MLAA Intensity:</source>
        <translation>MLAA 强度:</translation>
    </message>
</context>
<context>
    <name>ProjectCreatePopup</name>
    <message>
        <source>New Project</source>
        <translation>新建项目</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>OK</source>
        <translation>确定</translation>
    </message>
    <message>
        <source>It is not possible to create the %1 project.</source>
        <translation>无法创建 %1 项目。</translation>
    </message>
    <message>
        <source>Project Name cannot be empty or contain any of the following characters:
 \ / : * ? &quot; &lt; &gt; |</source>
        <translation>项目名称不能为空也不能包含如下的任一字符:
 \ / : * ? &quot; &lt; &gt; |</translation>
    </message>
    <message>
        <source>Bad project name: &apos;%1&apos; looks like an absolute file path</source>
        <translation>不当的项目名称: “%1”像是一个绝对文件路径</translation>
    </message>
    <message>
        <source>Project &apos;%1&apos; already exists</source>
        <translation>项目“%1”已经存在</translation>
    </message>
</context>
<context>
    <name>ProjectPopup</name>
    <message>
        <source>Project Name:</source>
        <translation>项目名称:</translation>
    </message>
    <message>
        <source>Append $scenepath to +drawings</source>
        <translation>将 $scenepath 附加到 +drawings</translation>
    </message>
    <message>
        <source>Append $scenepath to +inputs</source>
        <translation>将 $scenepath 附加到 +inputs</translation>
    </message>
    <message>
        <source>Append $scenepath to +extras</source>
        <translation>将 $scenepath 附加到 +extras</translation>
    </message>
    <message>
        <source>Project:</source>
        <translation>项目:</translation>
    </message>
</context>
<context>
    <name>ProjectSettingsPopup</name>
    <message>
        <source>Project Settings</source>
        <translation>项目设置</translation>
    </message>
</context>
<context>
    <name>PsdSettingsPopup</name>
    <message>
        <source>Load PSD File</source>
        <translation>加载 PSD 文件</translation>
    </message>
    <message>
        <source>Name:</source>
        <translation>名称:</translation>
    </message>
    <message>
        <source>Path:</source>
        <translation>路径:</translation>
    </message>
    <message>
        <source>Expose in a Sub-xsheet</source>
        <translation>公开到子摄影表</translation>
    </message>
    <message>
        <source>Load As:</source>
        <translation>加载为:</translation>
    </message>
    <message>
        <source>Group Option</source>
        <translation>组选项</translation>
    </message>
    <message>
        <source>Ignore groups</source>
        <translation>忽略组</translation>
    </message>
    <message>
        <source>Expose layers in a group as columns in a sub-xsheet</source>
        <translation>将组中的层公开为一张子摄影表中的列</translation>
    </message>
    <message>
        <source>Expose layers in a group as frames in a column</source>
        <translation>将组中的层公开为一列中的帧</translation>
    </message>
    <message>
        <source>FileName#LayerName</source>
        <translation>文件名#图层名</translation>
    </message>
    <message>
        <source>LayerName</source>
        <translation>图层名</translation>
    </message>
    <message>
        <source>Level Name:</source>
        <translation>层级名:</translation>
    </message>
</context>
<context>
    <name>QApplication</name>
    <message>
        <source>Quit</source>
        <translation>退出</translation>
    </message>
    <message>
        <source>New Scene</source>
        <translation>新建场景</translation>
    </message>
    <message>
        <source>Load Scene</source>
        <translation>加载场景</translation>
    </message>
</context>
<context>
    <name>QObject</name>
    <message>
        <source>No data to paste.</source>
        <translation>无数据可粘贴。</translation>
    </message>
    <message>
        <source>It is not possible to paste the cells: there is a circular reference.</source>
        <translation>无法粘贴帧格: 存在循环引用。</translation>
    </message>
    <message>
        <source>Overwrite</source>
        <translation>覆盖</translation>
    </message>
    <message>
        <source>Don&apos;t Overwrite</source>
        <translation>不覆盖</translation>
    </message>
    <message>
        <source>Save</source>
        <translation>保存</translation>
    </message>
    <message>
        <source>Discard</source>
        <translation>放弃更改</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>The color model palette is different from the destination palette.
What do you want to do? </source>
        <translation>色彩模型的调色板和目标调色板不同。
要怎么处理？</translation>
    </message>
    <message>
        <source>Overwrite the destination palette.</source>
        <translation>覆盖目标调色板。</translation>
    </message>
    <message>
        <source>Keep the destination palette and apply it to the color model.</source>
        <translation>保留目标调色板，并应用到色彩模型。</translation>
    </message>
    <message>
        <source>It is not possible to paste the columns: there is a circular reference.</source>
        <translation>无法粘贴列: 存在循环引用。</translation>
    </message>
    <message>
        <source>None</source>
        <translation>无</translation>
    </message>
    <message>
        <source>Edited</source>
        <translation>已编辑</translation>
    </message>
    <message>
        <source>Normal</source>
        <translation>正常</translation>
    </message>
    <message>
        <source>To Update</source>
        <translation>需要更新</translation>
    </message>
    <message>
        <source>Modified</source>
        <translation>已修改</translation>
    </message>
    <message>
        <source>Locked</source>
        <translation>已锁定</translation>
    </message>
    <message>
        <source>Unversioned</source>
        <translation>未做版本管理</translation>
    </message>
    <message>
        <source>Missing</source>
        <translation>缺失</translation>
    </message>
    <message>
        <source>Duplicate</source>
        <translation>复制</translation>
    </message>
    <message>
        <source>Don&apos;t Duplicate</source>
        <translation>不要复制</translation>
    </message>
    <message numerus="yes">
        <source>Deleting %n files. Are you sure?</source>
        <translation>
            <numerusform>确定要删除 %n 个文件吗？</numerusform>
        </translation>
    </message>
    <message>
        <source>Delete</source>
        <translation>删除</translation>
    </message>
    <message>
        <source>You are going to premultiply selected files.
The operation cannot be undone: are you sure?</source>
        <translation>对所选文件预乘 Alpha。
该操作无法撤销: 是否继续？</translation>
    </message>
    <message>
        <source>Premultiply</source>
        <translation>预乘 Alpha</translation>
    </message>
    <message>
        <source>%1  has an invalid extension format.</source>
        <translation>%1 的文件扩展格式无效。</translation>
    </message>
    <message>
        <source>File %1 doesn&apos;t belong to the current project.
Do you want to import it or load it from its original location?</source>
        <translation>文件 %1 不属于当前项目。
您要导入它还是从它的原始位置进行加载？</translation>
    </message>
    <message>
        <source>Import</source>
        <translation>导入</translation>
    </message>
    <message>
        <source>Load</source>
        <translation>加载</translation>
    </message>
    <message>
        <source>The camera settings of the scene you are loading as sub-xsheet are different from those of your current scene. What you want to do?</source>
        <translation>您正在加载为子摄影表的场景和当前场景的摄影机设置不一致。要怎么处理？</translation>
    </message>
    <message>
        <source>Keep the sub-xsheet original camera settings.</source>
        <translation>保留子摄影表原来的摄影机设置。</translation>
    </message>
    <message>
        <source>Apply the current scene camera settings to the sub-xsheet.</source>
        <translation>应用当前场景的摄影机设置到子摄影表。</translation>
    </message>
    <message>
        <source>%1 has an invalid file extension.</source>
        <translation>%1 的文件扩展无效。</translation>
    </message>
    <message>
        <source>%1 is an invalid path.</source>
        <translation>%1 的路径无效。</translation>
    </message>
    <message>
        <source>Import Scene</source>
        <translation>导入场景</translation>
    </message>
    <message>
        <source>Change Project</source>
        <translation>更改项目</translation>
    </message>
    <message>
        <source>No cleaned up drawings available for the current selection.</source>
        <translation>当前选区中无已清稿的图像可用。</translation>
    </message>
    <message>
        <source>No saved drawings available for the current selection.</source>
        <translation>当前选区中无已保存的图像可用。</translation>
    </message>
    <message>
        <source>The current selection is invalid.</source>
        <translation>当前选区无效。</translation>
    </message>
    <message>
        <source>Yes</source>
        <translation>是</translation>
    </message>
    <message>
        <source>No</source>
        <translation>否</translation>
    </message>
    <message>
        <source>System date tampered.</source>
        <translation>系统日期已被篡改</translation>
    </message>
    <message>
        <source>No more Undo operations available.</source>
        <translation>无更多撤消操作可用。</translation>
    </message>
    <message>
        <source>No more Redo operations available.</source>
        <translation>无更多重做操作可用。</translation>
    </message>
    <message>
        <source>An update is available for this software.
Visit the Web site for more information.</source>
        <translation>本软件有可用更新。
请访问网站获取更多信息。</translation>
    </message>
    <message>
        <source>Quit</source>
        <translation>退出</translation>
    </message>
    <message>
        <source>Scan</source>
        <translation>扫描</translation>
    </message>
    <message>
        <source>Don&apos;t Scan</source>
        <translation>不扫描</translation>
    </message>
    <message>
        <source>Select an empty cell or a sub-xsheet cell.</source>
        <translation>选择一个空的帧格或空的子摄影帧格。</translation>
    </message>
    <message>
        <source>Collapsing columns: what you want to do?</source>
        <translation>正在折叠列: 您要怎么处理？</translation>
    </message>
    <message>
        <source>Include relevant pegbars in the sub-xsheet as well.</source>
        <translation>将相关定位尺也包含到该子摄影表中。</translation>
    </message>
    <message>
        <source>Include only selected columns in the sub-xsheet.</source>
        <translation>仅将所选的列包含到该子摄影表。</translation>
    </message>
    <message>
        <source>Exploding Sub-xsheet: what you want to do?</source>
        <translation>正在展开子摄影表: 您要如何展开？</translation>
    </message>
    <message>
        <source>Bring relevant pegbars in the main xsheet.</source>
        <translation>将相关定位尺带到主摄影表。</translation>
    </message>
    <message>
        <source>Bring only columns in the main xsheet.</source>
        <translation>仅将列带到主摄影表。</translation>
    </message>
    <message>
        <source>Are you sure you want to override </source>
        <translation>您确定要覆盖吗？</translation>
    </message>
    <message>
        <source>Override</source>
        <translation>覆盖</translation>
    </message>
    <message>
        <source>It is not possible to track the level:
allocation error.</source>
        <translation>无法追踪该层级:
分配错误。</translation>
    </message>
    <message>
        <source>It is not possible to track the level:
no region defined.</source>
        <translation>无法追踪该层级:
无已定义区域。</translation>
    </message>
    <message>
        <source>It is not possible to track specified regions:
more than 30 regions defined.</source>
        <translation>无法追踪指定的区域:
定义了超过 30 个区域。</translation>
    </message>
    <message>
        <source>It is not possible to track specified regions:
defined regions are not valid.</source>
        <translation>无法追踪指定区域:
定义的区域是无效的。</translation>
    </message>
    <message>
        <source>It is not possible to track specified regions:
some regions are too wide.</source>
        <translation>无法追踪指定的区域:
部分区域太宽了。</translation>
    </message>
    <message>
        <source>It is not possible to track specified regions:
some regions are too high.</source>
        <translation>无法指定追踪区域:
部分区域太高了。</translation>
    </message>
    <message>
        <source>Frame Start Error</source>
        <translation>开始帧错误</translation>
    </message>
    <message>
        <source>Frame End Error</source>
        <translation>结束帧错误</translation>
    </message>
    <message>
        <source>Threshold Distance Error</source>
        <translation>阈值距离错误</translation>
    </message>
    <message>
        <source>Sensitivity Error</source>
        <translation>灵敏度错误</translation>
    </message>
    <message>
        <source>No Frame Found</source>
        <translation>没有找到帧</translation>
    </message>
    <message>
        <source>It is not possible to track specified regions:
the selected level is not valid.</source>
        <translation>无法追踪指定的区域:
所选的层级是无效的。</translation>
    </message>
    <message>
        <source>It is not possible to track the level:
no level selected.</source>
        <translation>无法追踪该层级:
没有选中层级。</translation>
    </message>
    <message>
        <source>It is not possible to track specified regions:
the level has to be saved first.</source>
        <translation>无法追踪指定区域:
必须先保存该层级。</translation>
    </message>
    <message>
        <source>It is not possible to track the level:
undefined error.</source>
        <translation>无法追踪该层级:
未定义错误。</translation>
    </message>
    <message>
        <source>Invalid selection: each selected column must contain one single level with increasing frame numbering.</source>
        <translation>无效的选择: 每个被选中的列必须只包含一个有递增帧编号的层级。</translation>
    </message>
    <message>
        <source>Viewer</source>
        <translation>查看器</translation>
    </message>
    <message>
        <source>Function Editor</source>
        <translation>功能编辑器</translation>
    </message>
    <message>
        <source>Scene Cast</source>
        <translation>场景演员表</translation>
    </message>
    <message>
        <source>Color Model</source>
        <translation>色彩模型</translation>
    </message>
    <message>
        <source>File Browser</source>
        <translation>文件浏览器</translation>
    </message>
    <message>
        <source>Level: </source>
        <translation>层级: </translation>
    </message>
    <message>
        <source>Tasks</source>
        <translation>任务</translation>
    </message>
    <message>
        <source>Schematic</source>
        <translation>示意图</translation>
    </message>
    <message>
        <source>Palette</source>
        <translation>调色板</translation>
    </message>
    <message>
        <source>Studio Palette</source>
        <translation>工作室调色板</translation>
    </message>
    <message>
        <source>Style Editor</source>
        <translation>样式编辑器</translation>
    </message>
    <message>
        <source>Tool Options</source>
        <translation>工具选项</translation>
    </message>
    <message>
        <source>LineTest Viewer</source>
        <translation>线稿测试 查看器</translation>
    </message>
    <message>
        <source>Xsheet</source>
        <translation>摄影表</translation>
    </message>
    <message>
        <source>FlipBook</source>
        <translation>翻页书</translation>
    </message>
    <message>
        <source>Deactivate Onion Skin</source>
        <translation>停用洋葱皮</translation>
    </message>
    <message>
        <source>Limit Onion Skin To Level</source>
        <translation>限制洋葱皮到层级</translation>
    </message>
    <message>
        <source>Extend Onion Skin To Scene</source>
        <translation>扩展洋葱皮到场景</translation>
    </message>
    <message>
        <source>Activate Onion Skin</source>
        <translation>启用洋葱皮</translation>
    </message>
    <message>
        <source>Are you sure you want to save the Default Settings?</source>
        <translation>您确定要保存默认设置吗？</translation>
    </message>
    <message>
        <source>Choose Folder</source>
        <translation>选择文件夹</translation>
    </message>
    <message>
        <source>Revert: the current scene has been modified.
Are you sure you want to revert to previous version?</source>
        <translation>复原: 当前场景已经被修改。
您确定要复原到上一版本吗？</translation>
    </message>
    <message>
        <source>Revert</source>
        <translation>复原</translation>
    </message>
    <message>
        <source>Deleting %1. Are you sure?</source>
        <translation>您确定要删除 %1 吗？</translation>
    </message>
    <message>
        <source>The %1 file has been generated</source>
        <translation>文件 %1 已经生成过</translation>
    </message>
    <message>
        <source>%1: the current scene has been modified.
Do you want to save your changes?</source>
        <translation>%1: 当前场景已经被修改。
要保存更改吗？</translation>
    </message>
    <message>
        <source>The scene %1 already exists.
Do you want to overwrite it?</source>
        <translation>场景 %1 已经存在。
要覆盖它吗？</translation>
    </message>
    <message>
        <source>The Scene &apos;%1&apos; belongs to project &apos;%2&apos;.
What do you want to do?</source>
        <translation>场景“%1”属于项目“%2”。
要怎么处理？</translation>
    </message>
    <message>
        <source>No unused levels</source>
        <translation>无未使用层级</translation>
    </message>
    <message>
        <source>Rendered Frames  ::  From %1 To %2  ::  Step %3</source>
        <translation>已渲染的帧    ::    从 %1 到 %2    ::    步长 %3</translation>
    </message>
    <message>
        <source>Preview FX :: %1 </source>
        <translation>预览特效  ::  %1 </translation>
    </message>
    <message>
        <source>Batch Servers</source>
        <translation>批处理服务器</translation>
    </message>
    <message>
        <source> Task added to the Batch Render List.</source>
        <translation>任务已添加到批处理渲染列表。</translation>
    </message>
    <message>
        <source> Task added to the Batch Cleanup List.</source>
        <translation>任务已添加到批处理清稿列表。</translation>
    </message>
    <message>
        <source>There are no assets to collect</source>
        <translation>没有素材可收集。</translation>
    </message>
    <message>
        <source>One asset imported</source>
        <translation>导入了 1 项素材</translation>
    </message>
    <message>
        <source>%1 assets imported</source>
        <translation>导入了 %1 项素材</translation>
    </message>
    <message>
        <source>Converting %1 images to tlv format...</source>
        <translation>%1 个图像正在转换为 TLV 格式...</translation>
    </message>
    <message>
        <source>No scene imported</source>
        <translation>无已导入的场景</translation>
    </message>
    <message>
        <source>One scene imported</source>
        <translation>导入了 1 个场景</translation>
    </message>
    <message>
        <source>%1 scenes imported</source>
        <translation>导入了 %1 个场景</translation>
    </message>
    <message>
        <source>It is not possible to delete lines because no column, cell or level strip frame was selected.</source>
        <translation>无法删除线，因为没有选择任何列、帧格或层级条帧。</translation>
    </message>
    <message>
        <source>The rooms will be reset the next time you run Toonz.</source>
        <translation>将在下次启动 OpenToonz 时重置工作区。</translation>
    </message>
    <message>
        <source>Saving previewed frames....</source>
        <translation>正在保存预览过的帧...</translation>
    </message>
    <message>
        <source>The command cannot be executed because the scene is empty.</source>
        <translation>无法执行该命令，因为场景是空的。</translation>
    </message>
    <message>
        <source>Change project</source>
        <translation>更改项目</translation>
    </message>
    <message>
        <source>It is not possible to delete the selection.</source>
        <translation>无法删除选区。</translation>
    </message>
    <message>
        <source>It is not possible to paste vectors in the current cell.</source>
        <translation>无法在当前帧格中粘贴矢量。</translation>
    </message>
    <message>
        <source>It is not possible to paste data: there is nothing to paste.</source>
        <translation>无法粘贴数据: 没有东西可粘贴。</translation>
    </message>
    <message>
        <source>The copied selection cannot be pasted in the current drawing.</source>
        <translation>无法将拷贝的选区粘贴到当前图像。</translation>
    </message>
    <message>
        <source>A filename cannot be empty or contain any of the following characters:
 \ / : * ? &quot; &lt; &gt; |</source>
        <translation>文件名不能为空也不能包含如下任一个字符:
\ / : * ? &quot; &lt; &gt; |</translation>
    </message>
    <message>
        <source>The palette %1 already exists.
Do you want to overwrite it?</source>
        <translation>调色板 %1 已经存在。
要覆盖它吗？</translation>
    </message>
    <message>
        <source>Cannot load Color Model in current palette.</source>
        <translation>无法加载色彩模型到当前调色板。</translation>
    </message>
    <message>
        <source>Image DPI</source>
        <translation>图像 DPI</translation>
    </message>
    <message>
        <source>Custom DPI</source>
        <translation>自定 DPI</translation>
    </message>
    <message>
        <source>Create project</source>
        <translation>创建项目</translation>
    </message>
    <message>
        <source>There are no frames to scan.</source>
        <translation>没有帧可扫描。</translation>
    </message>
    <message>
        <source>TWAIN is not available.</source>
        <translation>TWAIN 不可用。</translation>
    </message>
    <message>
        <source>Couldn&apos;t save %1</source>
        <translation>无法保存 %1</translation>
    </message>
    <message>
        <source>No level selected!</source>
        <translation>没有选择场景！</translation>
    </message>
    <message>
        <source>Exporting level of %1 frames in %2</source>
        <translation>将 %1 的层级导出到 %2 中</translation>
    </message>
    <message>
        <source>Warning: file %1 already exists.</source>
        <translation>警告: 文件 %1 已经存在。</translation>
    </message>
    <message>
        <source>Continue Exporting</source>
        <translation>继续导出</translation>
    </message>
    <message>
        <source>Stop Exporting</source>
        <translation>停止导出</translation>
    </message>
    <message>
        <source>The level %1 already exists.
Do you want to overwrite it?</source>
        <translation>层级 %1 已经存在。
要覆盖它吗？</translation>
    </message>
    <message>
        <source>The soundtrack %1 already exists.
Do you want to overwrite it?</source>
        <translation>音轨 %1 已经存在。
要覆盖它吗？</translation>
    </message>
    <message>
        <source>File %1 doesn&apos;t look like a TOONZ Scene</source>
        <translation>文件 %1 不像是 TOONZ 场景</translation>
    </message>
    <message>
        <source>It is not possible to load the scene %1 because it does not belong to any project.</source>
        <translation>无法加载场景 %1 ，因为它不属于任何项目。</translation>
    </message>
    <message>
        <source>There were problems loading the scene %1.
 Some files may be missing.</source>
        <translation>加载场景 %1 时遇到问题。
有文件丢失了。</translation>
    </message>
    <message>
        <source>There were problems loading the scene %1.
Some levels have not been loaded because their version is not supported</source>
        <translation>加载场景 %1 时遇到问题。
有些层级未能加载，因为其版本是不被支持的。</translation>
    </message>
    <message>
        <source>It is not possible to load the level %1</source>
        <translation>无法加载层级 %1</translation>
    </message>
    <message>
        <source>Save the scene first</source>
        <translation>请先保存场景</translation>
    </message>
    <message>
        <source>It is not possible to load the %1 level.</source>
        <translation>无法加载层级 %1。</translation>
    </message>
    <message>
        <source>The scene %1 doesn&apos;t exist.</source>
        <translation>场景 %1 不存在。</translation>
    </message>
    <message>
        <source>It is not possible to delete the used level %1.</source>
        <translation>无法删除已用的层级 %1。</translation>
    </message>
    <message>
        <source>The Revert to Last Saved command is not supported for the current selection.</source>
        <translation>当前选区不支持复原到最后保存的命令。</translation>
    </message>
    <message>
        <source>The selected column is empty.</source>
        <translation>所选列是空的。</translation>
    </message>
    <message>
        <source>Selected cells must be in the same column.</source>
        <translation>所选的帧格必须在同一个列中。</translation>
    </message>
    <message>
        <source>Match lines can be deleted from Toonz raster levels only</source>
        <translation>适配线只能在 Toonz 光栅层级中删除</translation>
    </message>
    <message>
        <source>Partially Edited</source>
        <translation>部分已编辑</translation>
    </message>
    <message>
        <source>Partially Locked</source>
        <translation>部分已锁定</translation>
    </message>
    <message>
        <source>Partially Modified</source>
        <translation>部分已修改</translation>
    </message>
    <message>
        <source>Name</source>
        <translation>名称</translation>
    </message>
    <message>
        <source>Path</source>
        <translation>路径</translation>
    </message>
    <message>
        <source>Date Created</source>
        <translation>创建日期</translation>
    </message>
    <message>
        <source>Date Modified</source>
        <translation>修改日期</translation>
    </message>
    <message>
        <source>Size</source>
        <translation>大小</translation>
    </message>
    <message>
        <source>Frames</source>
        <translation>帧</translation>
    </message>
    <message>
        <source>Version Control</source>
        <translation>版本控制</translation>
    </message>
    <message>
        <source>Warning: level %1 already exists; overwrite?</source>
        <translation>警告: 层级 %1 已经存在，要覆盖它吗？</translation>
    </message>
    <message>
        <source>It is not possible to paste image on the current cell.</source>
        <translation>无法粘贴图像到当前帧格。</translation>
    </message>
    <message>
        <source>Are you sure you want to delete the selected cleanup color?</source>
        <translation>您确定要删除所选的清稿颜色？</translation>
    </message>
    <message>
        <source>Installing %1 again could fix the problem.</source>
        <translation>再次安装 %1 能解决该问题。</translation>
    </message>
    <message>
        <source>It is not possible to apply match lines to a column containing more than one level.</source>
        <translation>无法在包含多个层级的列中应用适配线。</translation>
    </message>
    <message>
        <source>It is not possible to use a match lines column containing more than one level.</source>
        <translation>无法在包含多个层级的列中使用适配线。</translation>
    </message>
    <message>
        <source>Match lines can be applied to Toonz raster levels only.</source>
        <translation>适配线仅能应用到 Toonz 光栅层级。</translation>
    </message>
    <message>
        <source>The style index you specified is not available in the palette of the destination level.</source>
        <translation>指定的样式索引在目标层级调色板中不可用。</translation>
    </message>
    <message>
        <source>The style index range you specified is not valid: please separate values with a comma (e.g. 1,2,5) or with a dash (e.g. 4-7 will refer to indexes 4, 5, 6 and 7).</source>
        <translation>指定的样式索引范围无效: 请用逗号(例: 1,2,5)或者短横线(例: 4-7 表示 4,5,6,7)把数值分隔开。</translation>
    </message>
    <message>
        <source>The frame range you specified is not valid: please separate values with a comma (e.g. 1,2,5) or with a dash (e.g. 4-7 will refer to frames 4, 5, 6 and 7).</source>
        <translation>指定的帧范围无效: 请用逗号(例: 1,2,5)或者短横线(例: 4-7 表示 4,5,6,7)把数值分隔开。</translation>
    </message>
    <message>
        <source>No drawing is available in the frame range you specified.</source>
        <translation>指定的帧范围中没有图像可用。</translation>
    </message>
    <message>
        <source>It is not possible to perform a merging involving more than one level per column.</source>
        <translation>无法执行合并，因为该列涉及了多于一个的层级。</translation>
    </message>
    <message>
        <source>Only raster levels can be merged to a raster level.</source>
        <translation>只有光栅层级能被合并到光栅层级。</translation>
    </message>
    <message>
        <source>Only vector levels can be merged to a vector level.</source>
        <translation>只有矢量层级能被合并到矢量层级。</translation>
    </message>
    <message>
        <source>It is possible to merge only Toonz vector levels or standard raster levels.</source>
        <translation>只能合并 Toonz 矢量层级或标准光栅层级。</translation>
    </message>
    <message>
        <source>It is not possible to display the file %1: no player associated with its format</source>
        <translation>无法显示文件 %1: 没有播放器关联了它的格式。</translation>
    </message>
    <message>
        <source>The specified name is already assigned to the %1 file.</source>
        <translation>指定的名字已经分配给了文件 %1。</translation>
    </message>
    <message>
        <source>It is not possible to rename the %1 file.</source>
        <translation>无法重命名文件 %1。</translation>
    </message>
    <message>
        <source>It is not possible to copy the %1 file.</source>
        <translation>无法拷贝文件 %1。</translation>
    </message>
    <message>
        <source>It is not possible to save the curve.</source>
        <translation>无法保存曲线。</translation>
    </message>
    <message>
        <source>It is not possible to load the curve.</source>
        <translation>无法加载该曲线。</translation>
    </message>
    <message>
        <source>It is not possible to export data.</source>
        <translation>无法导出数据。</translation>
    </message>
    <message>
        <source>Export</source>
        <translation>导出</translation>
    </message>
    <message>
        <source>LineTest Capture</source>
        <translation>线稿测试 拍摄</translation>
    </message>
    <message>
        <source>It is not possible to save images in camera stand view.</source>
        <translation>无法在摄影机位视图中保存图像。</translation>
    </message>
    <message>
        <source>The preview images are not ready yet.</source>
        <translation>预览图像还没准备好。</translation>
    </message>
    <message>
        <source>A convertion task is in progress! wait until it stops or cancel it</source>
        <translation>正在进行转换任务！请等它停止或者取消它</translation>
    </message>
    <message>
        <source>Error loading scene %1 :%2</source>
        <translation>加载场景 %1 时发生错误: %2</translation>
    </message>
    <message>
        <source>Error loading scene %1</source>
        <translation>加载场景 %1 时发生错误</translation>
    </message>
    <message>
        <source>There was an error saving the %1 scene.</source>
        <translation>保存场景 %1 时发生错误。</translation>
    </message>
    <message>
        <source>It is not possible to export the scene %1 because it does not belong to any project.</source>
        <translation>无法导出场景 %1，因为它不属于任何项目。</translation>
    </message>
    <message>
        <source>Continue to All</source>
        <translation>继续全部</translation>
    </message>
    <message>
        <source>The selected paper format is not available for %1.</source>
        <translation>所选纸张格式在 %1 中不可用。</translation>
    </message>
    <message>
        <source>No TWAIN scanner is available</source>
        <translation>无 TWAIN 扫描仪可用</translation>
    </message>
    <message>
        <source>No scanner is available</source>
        <translation>无扫描仪可用</translation>
    </message>
    <message>
        <source>The autocentering failed on the current drawing.</source>
        <translation>在当前的绘图上自动定位中心失败。</translation>
    </message>
    <message>
        <source>Some of the selected drawings were already scanned. Do you want to scan them again?</source>
        <translation>所选的绘图有些是已经扫描了的。要重新扫描它们吗？</translation>
    </message>
    <message>
        <source>There was an error saving frames for the %1 level.</source>
        <translation>在层级 %1 保存帧时发生了错误。</translation>
    </message>
    <message>
        <source>It is not possible to create folder : %1</source>
        <translation>无法创建文件夹: %1。</translation>
    </message>
    <message>
        <source>It is not possible to create a folder.</source>
        <translation>无法创建文件夹。</translation>
    </message>
    <message>
        <source>The resolution of the output camera does not fit with the options chosen for the output file format.</source>
        <translation>输出摄影机的分辨率与选项中的输出文件格式不一致。</translation>
    </message>
    <message>
        <source>It is not possible to complete the rendering.</source>
        <translation>无法完成渲染。</translation>
    </message>
    <message>
        <source>Type</source>
        <translation>类型</translation>
    </message>
    <message>
        <source>The cleanup settings file for the %1 level already exists.
 Do you want to overwrite it?</source>
        <translation>层级 %1 的清稿文件已经存在。
要覆盖它吗？</translation>
    </message>
    <message>
        <source>The merge command is not available for greytones images.</source>
        <translation>合并命令不可用于灰调图像。</translation>
    </message>
    <message>
        <source>The cleanup settings for the current level have been modified...

Do you want to save your changes?</source>
        <translation>当前层级的清稿设置已经被修改...

要保存更改吗？</translation>
    </message>
    <message>
        <source>Cleanup Settings</source>
        <translation>清稿设置</translation>
    </message>
    <message>
        <source>The scene %1 was created with Toonz and cannot be loaded in LineTest.</source>
        <translation>场景 %1 是用 Toonz 创建的，不能加载到 LineTest 中。</translation>
    </message>
    <message>
        <source>File %1 already exists.
Do you want to overwrite it?</source>
        <translation>文件 %1 已经存在。
要覆盖它吗？</translation>
    </message>
    <message>
        <source>The level you are using has not a valid palette.</source>
        <translation>您使用的层级之中没有一有效的调色板。</translation>
    </message>
    <message>
        <source>Message Center</source>
        <translation>信息中心</translation>
    </message>
    <message>
        <source>Script Console</source>
        <translation>脚本控制台</translation>
    </message>
    <message>
        <source>Run script</source>
        <translation>运行脚本</translation>
    </message>
    <message>
        <source>Level </source>
        <translation>层级</translation>
    </message>
    <message>
        <source> already exists! Are you sure you want to overwrite it?</source>
        <translation>已经存在！您确定要覆盖它吗？</translation>
    </message>
    <message>
        <source>It is not possible to merge tlv columns containing more than one level</source>
        <translation>无法合并含有多于一个层级的 TLV 列。</translation>
    </message>
    <message>
        <source>Ok</source>
        <translation>确定</translation>
    </message>
    <message>
        <source>Selected folders don&apos;t belong to the current project.
Do you want to import them or load from their original location?</source>
        <translation>所选的文件夹不属于当前项目。
您要导入它们还是从它的原始位置进行加载？</translation>
    </message>
    <message>
        <source>Move Cleanup Camera</source>
        <translation>移动清稿摄影机</translation>
    </message>
    <message>
        <source>Scale Cleanup Camera</source>
        <translation>缩放清稿摄影机</translation>
    </message>
    <message>
        <source>Delete and Re-cleanup : The following files will be deleted.

</source>
        <translation>删除并重新清理: 下列文件将被删除。

</translation>
    </message>
    <message>
        <source>
Are you sure ?</source>
        <translation>
您确定吗？</translation>
    </message>
    <message>
        <source>Replace with copied palette</source>
        <translation>用拷贝的调色板替换</translation>
    </message>
    <message>
        <source>Keep original palette</source>
        <translation>保留原调色板</translation>
    </message>
    <message>
        <source>Insert Frame  at Frame %1</source>
        <translation>在帧 %1 处插入帧</translation>
    </message>
    <message>
        <source>Remove Frame  at Frame %1</source>
        <translation>在帧 %1 处移除帧</translation>
    </message>
    <message>
        <source>Insert Multiple Keys  at Frame %1</source>
        <translation>在帧 %1 处插入多个键</translation>
    </message>
    <message>
        <source>Remove Multiple Keys  at Frame %1</source>
        <translation>在帧 %1 处移除多个键</translation>
    </message>
    <message>
        <source>Set Keyframe : %1</source>
        <translation>设置关键帧：%1</translation>
    </message>
    <message>
        <source>Close SubXsheet</source>
        <translation>关闭子摄影表</translation>
    </message>
    <message>
        <source>Select a sub-xsheet cell.</source>
        <translation>请选择一个子摄影表帧格。</translation>
    </message>
    <message>
        <source>Collapse</source>
        <translation>折叠</translation>
    </message>
    <message>
        <source>Collapse (Fx)</source>
        <translation>折叠(特效)</translation>
    </message>
    <message>
        <source>Explode</source>
        <translation>展开</translation>
    </message>
    <message>
        <source>Delete Level  : %1</source>
        <translation>删除层级: %1</translation>
    </message>
    <message>
        <source>Revert To %1  : Level %2</source>
        <translation>复原至 %1: 层级 %2</translation>
    </message>
    <message>
        <source>Load Level  %1</source>
        <translation>加载层级 %1</translation>
    </message>
    <message>
        <source>Load and Replace Level  %1</source>
        <translation>加载并替换层级 %1</translation>
    </message>
    <message>
        <source>Expose Level  %1</source>
        <translation>公开层级 %1</translation>
    </message>
    <message>
        <source> Following file(s) are modified.

</source>
        <translation> 下列文件已经被修改。

</translation>
    </message>
    <message>
        <source>
Are you sure to </source>
        <translation>
您确定要</translation>
    </message>
    <message>
        <source> anyway ?</source>
        <translation>不管</translation>
    </message>
    <message>
        <source>OK</source>
        <translation>确定</translation>
    </message>
    <message>
        <source>Overwrite Palette</source>
        <translation>覆盖调色板</translation>
    </message>
    <message>
        <source>Don&apos;t Overwrite Palette</source>
        <translation>不要覆盖调色板</translation>
    </message>
    <message>
        <source>No Current Level</source>
        <translation>当前没有层级</translation>
    </message>
    <message>
        <source>Toonz cannot Save this Level</source>
        <translation>Toonz 不能保存该层级</translation>
    </message>
    <message>
        <source>No Current Scene</source>
        <translation>当前没有场景</translation>
    </message>
    <message>
        <source>Save level Failed</source>
        <translation>保存层级失败</translation>
    </message>
    <message>
        <source>Paste  : Level %1 : Frame </source>
        <translation>粘贴  : 层级 %1 : 帧 </translation>
    </message>
    <message>
        <source>Delete Frames  : Level %1 : Frame </source>
        <translation>删除帧  : 层级 %1 : 帧 </translation>
    </message>
    <message>
        <source>Cut Frames  : Level %1 : Frame </source>
        <translation>剪切帧  : 层级 %1 : 帧  </translation>
    </message>
    <message>
        <source>Add Frames  : Level %1 : Frame </source>
        <translation>添加帧  : 层级 %1 : 帧 </translation>
    </message>
    <message>
        <source>Renumber  : Level %1</source>
        <translation>重新编号  : 层级 %1</translation>
    </message>
    <message>
        <source>Insert  : Level %1</source>
        <translation>插入  : 层级 %1</translation>
    </message>
    <message>
        <source>Reverse  : Level %1</source>
        <translation>反序  : 层级 %1</translation>
    </message>
    <message>
        <source>Swing  : Level %1</source>
        <translation>摇摆  : 层级 %1</translation>
    </message>
    <message>
        <source>Step %1  : Level %2</source>
        <translation>步长 %1  : 层级 %2</translation>
    </message>
    <message>
        <source>Each %1  : Level %2</source>
        <translation>每 %1  : 层级 %2</translation>
    </message>
    <message>
        <source>Duplicate  : Level %1</source>
        <translation>复制  : 层级 %1</translation>
    </message>
    <message>
        <source>Move Level to Scene  : Level %1</source>
        <translation>移动层级到场景中  : 层级 %1</translation>
    </message>
    <message>
        <source>Inbetween  : Level %1,  </source>
        <translation>过渡帧  : 层级 %1</translation>
    </message>
    <message>
        <source>Paste Column :  </source>
        <translation>粘贴列 : </translation>
    </message>
    <message>
        <source>Delete Column :  </source>
        <translation>删除列 : </translation>
    </message>
    <message>
        <source>Insert Column :  </source>
        <translation>插入列 : </translation>
    </message>
    <message>
        <source>Resequence :  Col%1</source>
        <translation>重新排序 : Col%1</translation>
    </message>
    <message>
        <source>Clone Sub-xsheet :  Col%1</source>
        <translation>克隆子摄影表 : Col%1</translation>
    </message>
    <message>
        <source>Clear Cells :  Col%1</source>
        <translation>清理帧格 : Col%1</translation>
    </message>
    <message>
        <source>Reverse</source>
        <translation>反序</translation>
    </message>
    <message>
        <source>Swing</source>
        <translation>摇摆</translation>
    </message>
    <message>
        <source>Autoexpose</source>
        <translation>自动公开</translation>
    </message>
    <message>
        <source>Random</source>
        <translation>随机</translation>
    </message>
    <message>
        <source>Step %1</source>
        <translation>%1 步</translation>
    </message>
    <message>
        <source>Each %1</source>
        <translation>每 %1</translation>
    </message>
    <message>
        <source>Reframe to %1&apos;s</source>
        <translation>重新调节为 %1 帧</translation>
    </message>
    <message>
        <source>Roll Up</source>
        <translation>上卷</translation>
    </message>
    <message>
        <source>Roll Down</source>
        <translation>下卷</translation>
    </message>
    <message>
        <source>Clone  Level : %1 &gt; %2</source>
        <translation>克隆 层级 : %1 &gt; %2</translation>
    </message>
    <message>
        <source>Clone  Levels : </source>
        <translation>克隆 层级 : </translation>
    </message>
    <message>
        <source>Time Stretch</source>
        <translation>时间伸缩</translation>
    </message>
    <message>
        <source>Palette Gizmo</source>
        <translation>调色板装置</translation>
    </message>
    <message>
        <source>Create Level %1  at Column %2</source>
        <translation>在列 %2 中创建层级 %1</translation>
    </message>
    <message>
        <source>Do you want to expose the renamed level ?</source>
        <translation>您要公开这些已重命名的层级吗？</translation>
    </message>
    <message>
        <source>Expose</source>
        <translation>公开</translation>
    </message>
    <message>
        <source>Don&apos;t expose</source>
        <translation>不公开</translation>
    </message>
    <message>
        <source>Paste Key Frames</source>
        <translation>粘贴关键帧</translation>
    </message>
    <message>
        <source>Delete Key Frames</source>
        <translation>删除关键帧</translation>
    </message>
    <message>
        <source>Copy File</source>
        <translation>拷贝文件</translation>
    </message>
    <message>
        <source>Paste  File  : </source>
        <translation>粘贴文件 : </translation>
    </message>
    <message>
        <source>Duplicate  File  : </source>
        <translation>复制文件 : </translation>
    </message>
    <message>
        <source>Paste Cells</source>
        <translation>粘贴帧格</translation>
    </message>
    <message>
        <source>Delete Cells</source>
        <translation>删除帧格</translation>
    </message>
    <message>
        <source>Cut Cells</source>
        <translation>剪切帧格</translation>
    </message>
    <message>
        <source>Insert Cells</source>
        <translation>插入帧格</translation>
    </message>
    <message>
        <source>Paste (Strokes)</source>
        <translation>粘贴(描边)</translation>
    </message>
    <message>
        <source>Paste</source>
        <translation>粘贴</translation>
    </message>
    <message>
        <source>Paste (Raster)</source>
        <translation>粘贴(光栅)</translation>
    </message>
    <message>
        <source>Overwrite Paste Cells</source>
        <translation>覆盖粘贴帧格</translation>
    </message>
    <message>
        <source>Cannot paste data
 Nothing to paste</source>
        <translation>无法粘贴数据
没有东西可粘贴</translation>
    </message>
    <message>
        <source>Modify Play Range  : %1 - %2</source>
        <translation>修改播放范围  : %1 - %2</translation>
    </message>
    <message>
        <source>Modify Play Range  : %1 - %2  &gt;  %3 - %4</source>
        <translation>编辑播放范围  : %1 - %2  &gt;  %3 - %4</translation>
    </message>
    <message>
        <source>Use Level Extender</source>
        <translation>使用层级扩展器</translation>
    </message>
    <message>
        <source>Modify Sound Level</source>
        <translation>编辑声音层级</translation>
    </message>
    <message>
        <source>Set Keyframe  : %1  at Frame %2</source>
        <translation>设置关键帧  : %1  在帧 %2</translation>
    </message>
    <message>
        <source>Move Columns</source>
        <translation>移动列</translation>
    </message>
    <message>
        <source>Change Pegbar</source>
        <translation>更改定位尺</translation>
    </message>
    <message>
        <source>Rename Cell  at Column %1  Frame %2</source>
        <translation>重命名在列 %1 帧 %2 上的帧格</translation>
    </message>
    <message>
        <source>Move Level</source>
        <translation>移动层级</translation>
    </message>
    <message>
        <source>Combo Viewer</source>
        <translation>组合式查看器</translation>
    </message>
    <message>
        <source>Move Level to Cast Folder</source>
        <translation>移动层级到演员表文件夹</translation>
    </message>
    <message>
        <source>Merge Raster Levels</source>
        <translation>合并光栅层级</translation>
    </message>
    <message>
        <source>Delete Matchline  : Level %1</source>
        <translation>删除适配线  : 层级 %1</translation>
    </message>
    <message>
        <source>Apply Matchline  : Column%1 &lt; Column%2</source>
        <translation>应用适配线  : 列 %1 &lt; 列 %2</translation>
    </message>
    <message>
        <source>Palette Gizmo  %1</source>
        <translation>调色板装置  %1</translation>
    </message>
    <message>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <source>Palette is locked.</source>
        <translation>调试板被锁定了。</translation>
    </message>
    <message>
        <source>History</source>
        <translation>历史记录</translation>
    </message>
    <message>
        <source>Move Keyframe</source>
        <translation>移动关键帧</translation>
    </message>
    <message>
        <source>Move keyframe handle  : %1  Handle of the keyframe %2</source>
        <translation>移动关键帧手柄  : 帧 %2 的手柄 %1</translation>
    </message>
    <message>
        <source>Toggle cycle of  %1</source>
        <translation>切换是否循环 %1</translation>
    </message>
    <message>
        <source>[Drag] to move position</source>
        <translation>[拖动]以移动位置</translation>
    </message>
    <message>
        <source>----Separator----</source>
        <translation>----分隔条----</translation>
    </message>
    <message>
        <source>[Drag] to move position, [Double Click] to edit title</source>
        <translation>[拖动]以移动位置，[双击]以编辑标题</translation>
    </message>
    <message>
        <source>Incorrect file</source>
        <translation>不正确的文件</translation>
    </message>
    <message>
        <source>[Drag&amp;Drop] to copy separator to menu bar</source>
        <translation>[拖放]以拷贝分隔条到菜单栏&amp;D</translation>
    </message>
    <message>
        <source>[Drag&amp;Drop] to copy command to menu bar</source>
        <translation>[拖放]以拷贝命令到菜单栏&amp;D</translation>
    </message>
    <message>
        <source>Cannot open menubar settings template file. Re-installing Toonz will solve this problem.</source>
        <translation>无法打开菜单栏设置模板文件: 重装 OpenToonz 可解决此问题。</translation>
    </message>
    <message>
        <source>Visit Web Site</source>
        <translation>访问网站</translation>
    </message>
    <message>
        <source>https://opentoonz.github.io/e/</source>
        <translation></translation>
    </message>
    <message>
        <source>Add color model&apos;s palette to the destination palette.</source>
        <translation>将色彩模型的调色板添加到目标调色板。</translation>
    </message>
    <message>
        <source>Change current drawing %1</source>
        <translation>改变当前绘图%1</translation>
    </message>
    <message>
        <source>%1: the current scene has been modified.
What would you like to do?</source>
        <translation>%1: 当前场景已经被修改。
您要怎么做？</translation>
    </message>
    <message>
        <source>Save All</source>
        <translation>保存全部</translation>
    </message>
    <message>
        <source>Save Scene Only</source>
        <translation>仅保存场景</translation>
    </message>
    <message>
        <source>Discard Changes</source>
        <translation>丢弃更改</translation>
    </message>
    <message>
        <source> The following file(s) have been modified.

</source>
        <translation> 下列文件已经被修改。

</translation>
    </message>
    <message>
        <source>
What would you like to do? </source>
        <translation>
您要怎么做？</translation>
    </message>
    <message>
        <source>Save Changes</source>
        <translation>保存更改</translation>
    </message>
    <message>
        <source> Anyway</source>
        <translation>不管</translation>
    </message>
    <message>
        <source>This scene is incompatible with pixels only mode of the current OpenToonz version.
What would you like to do?</source>
        <translation>该场景和当前 OpenToonz 的仅像素模式不兼容。您要怎么做？</translation>
    </message>
    <message>
        <source>Turn off pixels only mode</source>
        <translation>关闭仅像素模式</translation>
    </message>
    <message>
        <source>Keep pixels only mode on and resize the scene</source>
        <translation>保持仅像素模式并调整场景大小</translation>
    </message>
    <message>
        <source>Hide Zero Thickness Lines</source>
        <translation>隐藏零宽度线</translation>
    </message>
    <message>
        <source>Show Zero Thickness Lines</source>
        <translation>显示零宽度线</translation>
    </message>
    <message>
        <source>&lt;custom&gt;</source>
        <translation>&lt;自定&gt;</translation>
    </message>
    <message>
        <source>The file name already exists.
Do you want to overwrite it?</source>
        <translation>文件名已经存在。您要覆盖它吗？</translation>
    </message>
    <message>
        <source>Deleting &quot;%1&quot;.
Are you sure?</source>
        <translation>删除 &quot;%1。您确定吗？</translation>
    </message>
    <message>
        <source>FFmpeg not found, please set the location in the Preferences and restart.</source>
        <translation>FFmpeg 没找到，请在首选项中设置位置并重启程序。</translation>
    </message>
    <message>
        <source>Skipping frame.</source>
        <translation>跳帧。</translation>
    </message>
    <message>
        <source>Always do this action.</source>
        <translation>总是执行这个动作。</translation>
    </message>
    <message>
        <source>The selected scene could not be found.</source>
        <translation>选中的场景不能找到。</translation>
    </message>
    <message>
        <source>Layer name</source>
        <translation>图层名</translation>
    </message>
    <message>
        <source>Command Bar</source>
        <translation>命令条</translation>
    </message>
    <message>
        <source>Stage Schematic</source>
        <translation>舞台示意图</translation>
    </message>
    <message>
        <source>Fx Schematic</source>
        <translation>特效示意图</translation>
    </message>
    <message>
        <source>Auto Input Cell Numbers : %1</source>
        <translation>自动输入帧格编号: %1</translation>
    </message>
    <message>
        <source>Insert</source>
        <translation>插入</translation>
    </message>
    <message>
        <source>Cannot paste data 
 Nothing to paste</source>
        <translation>不能粘贴数据
无内容可粘贴</translation>
    </message>
    <message>
        <source>Reframe to %1&apos;s with %2 blanks</source>
        <translation>用 %2 空白重排帧到 %1&apos;s</translation>
    </message>
    <message>
        <source>File not found</source>
        <translation>文件没找到</translation>
    </message>
    <message>
        <source>Don&apos;t Save</source>
        <translation>不保存</translation>
    </message>
</context>
<context>
    <name>ReframePopup</name>
    <message>
        <source>Reframe with Empty Inbetweens</source>
        <translation>添加空的中间画重排帧</translation>
    </message>
    <message>
        <source>OK</source>
        <translation>确定</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>steps</source>
        <translation>步长</translation>
    </message>
    <message>
        <source>with</source>
        <translation>加入</translation>
    </message>
    <message>
        <source>empty inbetweens</source>
        <translation>张空的中间画</translation>
    </message>
    <message>
        <source>(</source>
        <translation></translation>
    </message>
    <message>
        <source> blank cells will be inserted.)</source>
        <translation> 张空白帧格将被插入。)</translation>
    </message>
</context>
<context>
    <name>RenameAsToonzPopup</name>
    <message>
        <source>Delete Original Files</source>
        <translation>删除原文件</translation>
    </message>
    <message>
        <source>Level Name:</source>
        <translation>层级名称:</translation>
    </message>
    <message>
        <source>Rename</source>
        <translation>重命名</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Renaming File </source>
        <translation>正在重命名文件 </translation>
    </message>
    <message>
        <source>Creating an animation level of %1 frames</source>
        <translation>正在创建 %1 帧动画层级</translation>
    </message>
    <message>
        <source>The file name cannot be empty or contain any of the following characters:(new line)  \ / : * ? &quot;  |</source>
        <translation>文件名不能为空也不能包含如下的任一个字符:
 \ / : * ? &quot;  |</translation>
    </message>
</context>
<context>
    <name>RenderController</name>
    <message>
        <source>Continue</source>
        <translation>继续</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Exporting ...</source>
        <translation>正在导出...</translation>
    </message>
    <message>
        <source>Abort</source>
        <translation>中断</translation>
    </message>
    <message>
        <source>Exporting</source>
        <translation>正在导出</translation>
    </message>
    <message>
        <source>The %1 scene contains an audio file with different characteristics from the one used in the first exported scene.
The audio file will not be included in the rendered clip.</source>
        <translation>场景 %1 包含的一个声音文件，它和第一次导出的场景里使用的那个有着不同的特征。
这个声音文件将不会包含在渲染出的剪辑里。</translation>
    </message>
    <message>
        <source>The %1  scene has a different resolution from the %2 scene.
                           The output result may differ from what you expect. What do you want to do?</source>
        <translation>场景 %1 的分辨率不同于场景 %2。
                           输出结果可能和您所要的不一样。要怎么做？</translation>
    </message>
</context>
<context>
    <name>RenderListener</name>
    <message>
        <source>Finalizing render, please wait.</source>
        <translation>完成渲染最后阶段，请稍等。</translation>
    </message>
</context>
<context>
    <name>RenumberPopup</name>
    <message>
        <source>Renumber</source>
        <translation>重新编号</translation>
    </message>
    <message>
        <source>Start:</source>
        <translation>开始:</translation>
    </message>
    <message>
        <source>Step:</source>
        <translation>步长:</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
</context>
<context>
    <name>ReplaceLevelPopup</name>
    <message>
        <source>Replace Level</source>
        <translation>替换层级</translation>
    </message>
    <message>
        <source>Replace</source>
        <translation>替换</translation>
    </message>
    <message>
        <source>Nothing to replace: no cells selected.</source>
        <translation>没有可替换的: 没有帧格被选中。</translation>
    </message>
    <message>
        <source>File not found
</source>
        <translation>找不到文件
</translation>
    </message>
</context>
<context>
    <name>ReplaceParentDirectoryPopup</name>
    <message>
        <source>Replace Parent Directory</source>
        <translation>替换父目录</translation>
    </message>
    <message>
        <source>Replace</source>
        <translation>替换</translation>
    </message>
    <message>
        <source>Nothing to replace: no cells or columns selected.</source>
        <translation>没有可替换的: 没有帧格或者列被选中。</translation>
    </message>
</context>
<context>
    <name>RoomTabWidget</name>
    <message>
        <source>New Room</source>
        <translation>新建工作区</translation>
    </message>
    <message>
        <source>Delete Room</source>
        <translation>删除工作区</translation>
    </message>
    <message>
        <source>Room</source>
        <translation>工作区</translation>
    </message>
    <message>
        <source>Are you sure you want to remove room %1</source>
        <translation>确实要删除工作区 %1 吗</translation>
    </message>
    <message>
        <source>Delete Room &quot;%1&quot;</source>
        <translation>删除工作区“%1”</translation>
    </message>
    <message>
        <source>Customize Menu Bar of Room &quot;%1&quot;</source>
        <translation>自定工作区“%1”的菜单栏</translation>
    </message>
</context>
<context>
    <name>Ruler</name>
    <message>
        <source>Click to create an horizontal guide</source>
        <translation>[点按]以创建水平参考线</translation>
    </message>
    <message>
        <source>Click to create a vertical guide</source>
        <translation>[点按]以创建垂直参考线</translation>
    </message>
    <message>
        <source>Click and drag to move guide</source>
        <translation>[点按并拖动]以移动参考线</translation>
    </message>
</context>
<context>
    <name>SVNCleanupDialog</name>
    <message>
        <source>Version Control: Cleanup</source>
        <translation>版本控制: 清理</translation>
    </message>
    <message>
        <source>Cleaning up %1...</source>
        <translation>正在清理 %1 ...</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>Cleanup done.</source>
        <translation>清理完成。</translation>
    </message>
</context>
<context>
    <name>SVNCommitDialog</name>
    <message>
        <source>Version Control: Put changes</source>
        <translation>版本控制: 放置更改</translation>
    </message>
    <message>
        <source>Select / Deselect All</source>
        <translation>全选/全不选</translation>
    </message>
    <message>
        <source>0 Selected / 0 Total</source>
        <translation>已选择 0 / 总计 0 个</translation>
    </message>
    <message>
        <source>Getting repository status...</source>
        <translation>正在获取仓库状态...</translation>
    </message>
    <message>
        <source>Comment:</source>
        <translation>注释:</translation>
    </message>
    <message>
        <source>Put Scene Contents</source>
        <translation>放置场景内容</translation>
    </message>
    <message>
        <source>Put</source>
        <translation>放置</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Adding %1 items...</source>
        <translation>正在添加 %1 个项目...</translation>
    </message>
    <message>
        <source>Set needs-lock property...</source>
        <translation>设置 needs-lock 属性...</translation>
    </message>
    <message>
        <source>Committing %1 items...</source>
        <translation>正在提交 %1 个项目...</translation>
    </message>
    <message>
        <source>Put done successfully.</source>
        <translation>放置成功完成。</translation>
    </message>
    <message>
        <source>Putting %1 items...</source>
        <translation>正在放置 %1 个项目...</translation>
    </message>
    <message>
        <source>No items to put.</source>
        <translation>没有项目可放置。</translation>
    </message>
    <message>
        <source>%1 items to put.</source>
        <translation>共 %1 个项目可放置。</translation>
    </message>
    <message>
        <source>%1 Selected / %2 Total</source>
        <translation>已选择 %1 / 总计 %2 个</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
</context>
<context>
    <name>SVNCommitFrameRangeDialog</name>
    <message>
        <source>Version Control: Put</source>
        <translation>版本控制: 放置</translation>
    </message>
    <message>
        <source>Note: the file will be updated too.</source>
        <translation>注意: 这个文件也将被更新。</translation>
    </message>
    <message>
        <source>Comment:</source>
        <translation>注释:</translation>
    </message>
    <message>
        <source>Put</source>
        <translation>放置</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Put done successfully.</source>
        <translation>放置成功完成。</translation>
    </message>
    <message>
        <source>Locking file...</source>
        <translation>正在锁定文件...</translation>
    </message>
    <message>
        <source>Getting frame range edit information...</source>
        <translation>正在获取帧范围的编辑信息...</translation>
    </message>
    <message>
        <source>No frame range edited.</source>
        <translation>无帧范围已编辑。</translation>
    </message>
    <message>
        <source>Updating frame range edit information...</source>
        <translation>正在更新帧范围的编辑信息...</translation>
    </message>
    <message>
        <source>Putting changes...</source>
        <translation>正在放置更改...</translation>
    </message>
    <message>
        <source>Updating file...</source>
        <translation>正在更新文件...</translation>
    </message>
    <message>
        <source>Adding hook file to repository...</source>
        <translation>正在添加钩子文件到仓库...</translation>
    </message>
    <message>
        <source>Setting the needs-lock property to hook file...</source>
        <translation>正在设置 needs-lock 属性到钩子文件...</translation>
    </message>
</context>
<context>
    <name>SVNDeleteDialog</name>
    <message>
        <source>Version Control: Delete</source>
        <translation>版本控制: 删除</translation>
    </message>
    <message>
        <source>Delete folder that contains %1 items.</source>
        <translation>删除包含 %1 个项目的文件夹。</translation>
    </message>
    <message>
        <source>Delete empty folder.</source>
        <translation>删除空文件夹。</translation>
    </message>
    <message>
        <source>Delete %1 items.</source>
        <translation>删除 %1 个项目。</translation>
    </message>
    <message>
        <source>Comment:</source>
        <translation>注释:</translation>
    </message>
    <message>
        <source>Delete Scene Contents</source>
        <translation>删除场景内容</translation>
    </message>
    <message>
        <source> Keep Local Copy</source>
        <translation>保留本地拷贝</translation>
    </message>
    <message>
        <source>Delete Local Copy </source>
        <translation>删除本地拷贝</translation>
    </message>
    <message>
        <source>Delete on Server </source>
        <translation>删除服务器的文件</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Deleting %1 items...</source>
        <translation>正在删除 %1 个项目...</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation>删除</translation>
    </message>
    <message>
        <source>You are deleting items also on repository. Are you sure ?</source>
        <translation>您确定要把仓库上的项目也删除吗？</translation>
    </message>
</context>
<context>
    <name>SVNFrameRangeLockInfoDialog</name>
    <message>
        <source>Version Control: Edit Info</source>
        <translation>版本控制: 编辑信息</translation>
    </message>
    <message>
        <source>Getting repository status...</source>
        <translation>正在获取仓库状态...</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>No frame range edited.</source>
        <translation>无帧范围已编辑。</translation>
    </message>
    <message>
        <source>%1 on %2 is editing frames from %3 to %4.</source>
        <translation>%1 正在 %2 上编辑着从 %3 到 %4 的帧。</translation>
    </message>
</context>
<context>
    <name>SVNLockDialog</name>
    <message>
        <source>Version Control: Edit</source>
        <translation>版本控制: 编辑</translation>
    </message>
    <message>
        <source>Version Control: Unlock</source>
        <translation>版本控制: 解锁</translation>
    </message>
    <message>
        <source>Getting repository status...</source>
        <translation>正在获取仓库状态...</translation>
    </message>
    <message>
        <source>Comment:</source>
        <translation>注释:</translation>
    </message>
    <message>
        <source>Edit Scene Contents</source>
        <translation>编辑场景内容</translation>
    </message>
    <message>
        <source>Unlock Scene Contents</source>
        <translation>解锁场景内容</translation>
    </message>
    <message>
        <source>Edit</source>
        <translation>编辑</translation>
    </message>
    <message>
        <source>Unlock</source>
        <translation>解锁</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>No items to edit.</source>
        <translation>无项目可编辑。</translation>
    </message>
    <message>
        <source>No items to unlock.</source>
        <translation>无项目可解锁。</translation>
    </message>
    <message>
        <source>%1 items to edit.</source>
        <translation>共 %1 个项目可编辑。</translation>
    </message>
    <message>
        <source>%1 items to unlock.</source>
        <translation>共 %1 个项目可解锁。</translation>
    </message>
    <message>
        <source>Editing %1 items...</source>
        <translation>正在编辑 %1 个项目...</translation>
    </message>
    <message>
        <source>Unlocking %1 items...</source>
        <translation>正在解锁 %1 个项目...</translation>
    </message>
</context>
<context>
    <name>SVNLockFrameRangeDialog</name>
    <message>
        <source>Version Control: Edit Frame Range</source>
        <translation>版本控制: 编辑帧范围</translation>
    </message>
    <message>
        <source>Temporary Lock file...</source>
        <translation>临时锁定文件...</translation>
    </message>
    <message>
        <source>From:</source>
        <translation>开始帧:</translation>
    </message>
    <message>
        <source>To:</source>
        <translation>结束帧:</translation>
    </message>
    <message>
        <source>Comment:</source>
        <translation>注释:</translation>
    </message>
    <message>
        <source>Edit</source>
        <translation>编辑</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>No frame range edited.</source>
        <translation>无帧范围已编辑。</translation>
    </message>
    <message>
        <source>Getting frame range edit information...</source>
        <translation>正在获取帧范围的编辑信息...</translation>
    </message>
    <message>
        <source>%1 on %2 is editing frames from %3 to %4.</source>
        <translation>%1 正在 %2 上编辑着从 %3 到 %4 的帧。</translation>
    </message>
</context>
<context>
    <name>SVNLockInfoDialog</name>
    <message>
        <source>Version Control: Edit Info</source>
        <translation>版本控制: 编辑信息</translation>
    </message>
    <message>
        <source>&lt;b&gt;Edited By:&lt;/b&gt;</source>
        <translation>&lt;b&gt;编辑者:&lt;/b&gt;</translation>
    </message>
    <message>
        <source>&lt;b&gt;Host:&lt;/b&gt;</source>
        <translation>&lt;b&gt;主机:&lt;/b&gt;</translation>
    </message>
    <message>
        <source>&lt;b&gt;Comment:&lt;/b&gt;</source>
        <translation>&lt;b&gt;注释:&lt;/b&gt;</translation>
    </message>
    <message>
        <source>&lt;b&gt;Date:&lt;/b&gt;</source>
        <translation>&lt;b&gt;日期:&lt;/b&gt;</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
</context>
<context>
    <name>SVNLockMultiFrameRangeDialog</name>
    <message>
        <source>Version Control: Edit Frame Range</source>
        <translation>版本控制: 编辑帧范围</translation>
    </message>
    <message>
        <source>Getting repository status...</source>
        <translation>正在获取仓库状态...</translation>
    </message>
    <message>
        <source>From:</source>
        <translation>开始:</translation>
    </message>
    <message>
        <source>To:</source>
        <translation>结束:</translation>
    </message>
    <message>
        <source>Comment:</source>
        <translation>注释:</translation>
    </message>
    <message>
        <source>Edit</source>
        <translation>编辑</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>No frame range edited.</source>
        <translation>无帧范围已编辑。</translation>
    </message>
    <message>
        <source>Editing %1 items...</source>
        <translation>正在编辑 %1 个项目...</translation>
    </message>
    <message>
        <source>%1 is editing frames from %2 to %3</source>
        <translation>%1 正在编辑从 %2 到 %3 的帧</translation>
    </message>
</context>
<context>
    <name>SVNMultiFrameRangeLockInfoDialog</name>
    <message>
        <source>Version Control: Edit Info</source>
        <translation>版本控制: 编辑信息</translation>
    </message>
    <message>
        <source>Getting repository status...</source>
        <translation>正在获取仓库状态...</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>No frame range edited.</source>
        <translation>无帧范围已编辑。</translation>
    </message>
    <message>
        <source>%1 is editing frames from %2 to %3</source>
        <translation>%1 正在编辑从 %2 到 %3 的帧</translation>
    </message>
</context>
<context>
    <name>SVNPurgeDialog</name>
    <message>
        <source>Version Control: Purge</source>
        <translation>版本控制: 清除</translation>
    </message>
    <message>
        <source>Note: the file will be updated too.</source>
        <translation>注意: 这个文件也将被更新。</translation>
    </message>
    <message>
        <source>Getting repository status...</source>
        <translation>正在获取仓库状态...</translation>
    </message>
    <message>
        <source>Purge</source>
        <translation>清除</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>No items to purge.</source>
        <translation>无项目可清除。</translation>
    </message>
    <message>
        <source>%1 items to purge.</source>
        <translation>共 %1 个项目可清除。</translation>
    </message>
    <message>
        <source>Purging files...</source>
        <translation>正在清除文件...</translation>
    </message>
</context>
<context>
    <name>SVNRevertDialog</name>
    <message>
        <source>Version Control: Revert changes</source>
        <translation>版本控制: 复原更改</translation>
    </message>
    <message>
        <source>Getting repository status...</source>
        <translation>正在获取仓库状态...</translation>
    </message>
    <message>
        <source>Revert Scene Contents</source>
        <translation>复原场景内容</translation>
    </message>
    <message>
        <source>Revert</source>
        <translation>复原</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>No items to revert.</source>
        <translation>无项目可复原。</translation>
    </message>
    <message>
        <source>%1 items to revert.</source>
        <translation>共 %1 个项目可复原。</translation>
    </message>
    <message>
        <source>Reverting %1 items...</source>
        <translation>正在复原 %1 个项目...</translation>
    </message>
    <message>
        <source>Revert done successfully.</source>
        <translation>复原成功完成。</translation>
    </message>
</context>
<context>
    <name>SVNRevertFrameRangeDialog</name>
    <message>
        <source>Version Control: Revert Frame Range changes</source>
        <translation>版本控制: 复原帧范围的更改</translation>
    </message>
    <message>
        <source>1 item to revert.</source>
        <translation>1 个项目可复原。</translation>
    </message>
    <message>
        <source>Revert</source>
        <translation>复原</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Reverting 1 item...</source>
        <translation>正在复原 1 个项目...</translation>
    </message>
    <message>
        <source>Revert done successfully.</source>
        <translation>复原成功完成。</translation>
    </message>
    <message>
        <source>Reverting %1 items...</source>
        <translation>正在复原 %1 个项目...</translation>
    </message>
    <message>
        <source>It is not possible to revert the file.</source>
        <translation>无法复原该文件。</translation>
    </message>
</context>
<context>
    <name>SVNTimeline</name>
    <message>
        <source>Version Control: Timeline </source>
        <translation>版本控制: 时间轴</translation>
    </message>
    <message>
        <source>Getting file history...</source>
        <translation>正在获取文件历史...</translation>
    </message>
    <message>
        <source>Get Scene Contents</source>
        <translation>获取场景内容</translation>
    </message>
    <message>
        <source>Get Last Revision</source>
        <translation>获取最新的修订</translation>
    </message>
    <message>
        <source>Get Selected Revision</source>
        <translation>获取所选的修订</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>Getting repository status...</source>
        <translation>正在获取仓库状态...</translation>
    </message>
    <message>
        <source>Date</source>
        <translation>日期</translation>
    </message>
    <message>
        <source>Author</source>
        <translation>作者</translation>
    </message>
    <message>
        <source>Comment</source>
        <translation>注释</translation>
    </message>
    <message>
        <source>Revision</source>
        <translation>修订</translation>
    </message>
    <message>
        <source>Getting the status for %1...</source>
        <translation>正在获取 %1 的状态...</translation>
    </message>
    <message>
        <source>Getting %1 to revision %2...</source>
        <translation>正在获取 %1 到修订 %2...</translation>
    </message>
    <message>
        <source>Getting %1 items to revision %2...</source>
        <translation>正在获取 %1 个项目到修订 %2...</translation>
    </message>
    <message>
        <source>Getting %1...</source>
        <translation>正在获取 %1...</translation>
    </message>
    <message>
        <source>Getting %1 items...</source>
        <translation>正在获取 %1 个项目...</translation>
    </message>
</context>
<context>
    <name>SVNUnlockFrameRangeDialog</name>
    <message>
        <source>Version Control: Unlock Frame Range</source>
        <translation>版本控制: 解锁帧范围</translation>
    </message>
    <message>
        <source>Note: the file will be updated too. Are you sure ?</source>
        <translation>注意: 您确认要连这个文件也更新吗？</translation>
    </message>
    <message>
        <source>Unlock</source>
        <translation>解锁</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Unlock done successfully.</source>
        <translation>解锁成功完成。</translation>
    </message>
    <message>
        <source>Locking file...</source>
        <translation>正在锁定文件...</translation>
    </message>
    <message>
        <source>Getting frame range edit information...</source>
        <translation>正在获取帧范围的编辑信息...</translation>
    </message>
    <message>
        <source>No frame range edited.</source>
        <translation>无帧范围已编辑。</translation>
    </message>
    <message>
        <source>Updating frame range edit information...</source>
        <translation>正在更新帧范围的编辑信息...</translation>
    </message>
    <message>
        <source>Putting changes...</source>
        <translation>正在放置更改...</translation>
    </message>
    <message>
        <source>Updating file...</source>
        <translation>正在更新文件...</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
</context>
<context>
    <name>SVNUnlockMultiFrameRangeDialog</name>
    <message>
        <source>Version Control: Unlock Frame Range</source>
        <translation>版本控制: 解锁帧范围</translation>
    </message>
    <message>
        <source>Getting repository status...</source>
        <translation>正在获取仓库状态...</translation>
    </message>
    <message>
        <source>Unlock</source>
        <translation>解锁</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Unlocking %1 items...</source>
        <translation>正在解锁 %1 个项目...</translation>
    </message>
    <message>
        <source>No items to unlock.</source>
        <translation>无项目可解锁。</translation>
    </message>
    <message>
        <source>%1 items to unlock.</source>
        <translation>共 %1 个项目可解锁。</translation>
    </message>
</context>
<context>
    <name>SVNUpdateAndLockDialog</name>
    <message>
        <source>Version Control: Edit</source>
        <translation>版本控制: 编辑</translation>
    </message>
    <message>
        <source>Comment:</source>
        <translation>注释:</translation>
    </message>
    <message>
        <source>Edit Scene Contents</source>
        <translation>编辑场景内容</translation>
    </message>
    <message>
        <source>Get And Edit </source>
        <translation>获取并编辑</translation>
    </message>
    <message>
        <source>Edit</source>
        <translation>编辑</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>No items to edit.</source>
        <translation>无项目可编辑。</translation>
    </message>
    <message>
        <source>%1 items to edit.</source>
        <translation>共 %1 个项目可编辑。</translation>
    </message>
    <message>
        <source>Updating %1 items...</source>
        <translation>正在更新 %1 个项目...</translation>
    </message>
    <message>
        <source>Editing %1 items...</source>
        <translation>正在编辑 %1 个项目...</translation>
    </message>
</context>
<context>
    <name>SVNUpdateDialog</name>
    <message>
        <source>Version Control: Update</source>
        <translation>版本控制: 更新</translation>
    </message>
    <message>
        <source>Getting repository status...</source>
        <translation>正在获取仓库状态...</translation>
    </message>
    <message>
        <source>Get Scene Contents</source>
        <translation>获取场景内容</translation>
    </message>
    <message>
        <source>Update</source>
        <translation>更新</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>%1 items to update.</source>
        <translation>共 %1 个条目可更新。</translation>
    </message>
    <message>
        <source>Update to:</source>
        <translation>更新到:</translation>
    </message>
    <message>
        <source>Some conflict found. Select..</source>
        <translation>发现冲突。选择...</translation>
    </message>
    <message>
        <source>No items to update.</source>
        <translation>无项目可更新。</translation>
    </message>
    <message>
        <source>Some items are currently modified in your working copy.
Please commit or revert changes first.</source>
        <translation>有些项目在您工作的拷贝中被修改过。
请先提交或复原它的更改。</translation>
    </message>
    <message>
        <source>Updating items...</source>
        <translation>正在更新项目...</translation>
    </message>
    <message>
        <source>Updating to their items...</source>
        <translation>正在更新到它们的项目...</translation>
    </message>
</context>
<context>
    <name>SaveCurvePopup</name>
    <message>
        <source>Save Curve</source>
        <translation>保存曲线</translation>
    </message>
    <message>
        <source>Save</source>
        <translation>保存</translation>
    </message>
</context>
<context>
    <name>SaveImagesPopup</name>
    <message>
        <source>Save Flipbook Images</source>
        <translation>保存翻页书图像</translation>
    </message>
    <message>
        <source>Save</source>
        <translation>保存</translation>
    </message>
</context>
<context>
    <name>SaveLevelAsPopup</name>
    <message>
        <source>Save Level</source>
        <translation>保存层级</translation>
    </message>
    <message>
        <source>Save</source>
        <translation>保存</translation>
    </message>
</context>
<context>
    <name>SavePaletteAsPopup</name>
    <message>
        <source>Save Palette</source>
        <translation>保存调色板</translation>
    </message>
    <message>
        <source>Save</source>
        <translation>保存</translation>
    </message>
</context>
<context>
    <name>SavePresetPopup</name>
    <message>
        <source>Save Preset</source>
        <translation>保存预设</translation>
    </message>
    <message>
        <source>Preset Name:</source>
        <translation>预设名称:</translation>
    </message>
    <message>
        <source>Save</source>
        <translation>保存</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>It is not possible to create the preset folder %1.</source>
        <translation>无法创建预设文件夹 %1。</translation>
    </message>
    <message>
        <source>Do you want to overwrite?</source>
        <translation>确定要覆盖吗？</translation>
    </message>
    <message>
        <source>Yes</source>
        <translation>是</translation>
    </message>
    <message>
        <source>No</source>
        <translation>否</translation>
    </message>
</context>
<context>
    <name>SavePreviewedPopup</name>
    <message>
        <source>Save Previewed Images</source>
        <translation>保存预览过的图像</translation>
    </message>
    <message>
        <source>Save</source>
        <translation>保存</translation>
    </message>
</context>
<context>
    <name>SaveSceneAsPopup</name>
    <message>
        <source>Save Scene</source>
        <translation>保存场景</translation>
    </message>
    <message>
        <source>Save</source>
        <translation>保存</translation>
    </message>
</context>
<context>
    <name>SaveSettingsPopup</name>
    <message>
        <source>Save Cleanup Settings</source>
        <translation>保存清稿设置</translation>
    </message>
    <message>
        <source>Save</source>
        <translation>保存</translation>
    </message>
</context>
<context>
    <name>SaveSubSceneAsPopup</name>
    <message>
        <source>Save</source>
        <translation>保存</translation>
    </message>
    <message>
        <source>Sub-xsheet</source>
        <translation>子摄影表</translation>
    </message>
</context>
<context>
    <name>SaveTaskListPopup</name>
    <message>
        <source>Save Task List</source>
        <translation>保存任务列表</translation>
    </message>
    <message>
        <source>Save</source>
        <translation>保存</translation>
    </message>
</context>
<context>
    <name>ScanSettingsPopup</name>
    <message>
        <source>Scan Settings</source>
        <translation>扫描设置</translation>
    </message>
    <message>
        <source>[no scanner]</source>
        <translation>[没有扫描仪]</translation>
    </message>
    <message>
        <source>Paper Format:</source>
        <translation>纸张格式:</translation>
    </message>
    <message>
        <source>Reverse Order</source>
        <translation>反序</translation>
    </message>
    <message>
        <source>Paper Feeder</source>
        <translation>进纸器</translation>
    </message>
    <message>
        <source>Mode:</source>
        <translation>模式:</translation>
    </message>
    <message>
        <source>Dpi: </source>
        <translation>DPI: </translation>
    </message>
    <message>
        <source>Brightness: </source>
        <translation>亮度: </translation>
    </message>
    <message>
        <source>Threshold: </source>
        <translation>阈值: </translation>
    </message>
</context>
<context>
    <name>SceneSettingsPopup</name>
    <message>
        <source>Scene Settings</source>
        <translation>场景设置</translation>
    </message>
    <message>
        <source>          Frame Rate:</source>
        <translation>          帧速率:</translation>
    </message>
    <message>
        <source>Camera BG Color:</source>
        <translation>摄影机背景色:</translation>
    </message>
    <message>
        <source>Viewer BG Color:</source>
        <translation>查看器背景色:</translation>
    </message>
    <message>
        <source>   Preview BG Color:</source>
        <translation>   预览背景色:</translation>
    </message>
    <message>
        <source>Checkerboard Color 1:</source>
        <translation>棋盘色 1:</translation>
    </message>
    <message>
        <source>Checkerboard Color 2:</source>
        <translation>棋盘色 2:</translation>
    </message>
    <message>
        <source>Image Subsampling:</source>
        <translation>图像子采样:</translation>
    </message>
    <message>
        <source>      Marker Interval:</source>
        <translation>      标记间隔:</translation>
    </message>
    <message>
        <source>A/R:</source>
        <translation>长宽比:</translation>
    </message>
    <message>
        <source>Safe Area Box 2:</source>
        <translation>安全区域框 2:</translation>
    </message>
    <message>
        <source>Safe Area Box 1:</source>
        <translation>安全区域框 1:</translation>
    </message>
    <message>
        <source>TLV Subsampling:</source>
        <translation>TLV 子采样:</translation>
    </message>
    <message>
        <source>Start Frame:</source>
        <translation>开始帧:</translation>
    </message>
    <message>
        <source>Level And Column Icon:</source>
        <translation>层级和列图标:</translation>
    </message>
    <message>
        <source>Field Guide Size:</source>
        <translation>规格板大小:</translation>
    </message>
    <message>
        <source>Frame Rate:</source>
        <translation>帧速率:</translation>
    </message>
    <message>
        <source>Marker Interval:</source>
        <translation>标记间隔:</translation>
    </message>
    <message>
        <source>  Start Frame:</source>
        <translation>开始帧:</translation>
    </message>
    <message>
        <source>Enable Column Color Filter and Transparency for Rendering</source>
        <translation></translation>
    </message>
</context>
<context>
    <name>SceneViewerContextMenu</name>
    <message>
        <source>Swap Compared Images</source>
        <translation>交换比较过的图像</translation>
    </message>
    <message>
        <source>Save Previewed Frames</source>
        <translation>保存预览过的帧</translation>
    </message>
    <message>
        <source>Regenerate Preview</source>
        <translation>重新生成预览</translation>
    </message>
    <message>
        <source>Regenerate Frame Preview</source>
        <translation>重新生成帧预览</translation>
    </message>
    <message>
        <source>Select </source>
        <translation>选择 </translation>
    </message>
    <message>
        <source>Show </source>
        <translation>显示 </translation>
    </message>
    <message>
        <source>Hide </source>
        <translation>隐藏 </translation>
    </message>
    <message>
        <source>Show / Hide</source>
        <translation>显示/隐藏</translation>
    </message>
    <message>
        <source>Reset Subcamera</source>
        <translation>重置子摄影机</translation>
    </message>
    <message>
        <source>Select Camera</source>
        <translation>选择摄影机</translation>
    </message>
    <message>
        <source>Select Pegbar</source>
        <translation>选择定位尺</translation>
    </message>
    <message>
        <source>Select Column</source>
        <translation>选择列</translation>
    </message>
    <message>
        <source>Vector Guided Drawing</source>
        <translation>矢量引导绘图</translation>
    </message>
    <message>
        <source>Off</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>Closest Drawing</source>
        <translation>最靠近的笔画</translation>
    </message>
    <message>
        <source>Farthest Drawing</source>
        <translation>最远端的笔画</translation>
    </message>
    <message>
        <source>All Drawings</source>
        <translation>全部笔画</translation>
    </message>
</context>
<context>
    <name>SceneViewerPanel</name>
    <message>
        <source>Preview</source>
        <translation>预览</translation>
    </message>
    <message>
        <source>Sub-camera Preview</source>
        <translation>子摄影机预览</translation>
    </message>
    <message>
        <source>Untitled</source>
        <translation>未命名</translation>
    </message>
    <message>
        <source>Scene: </source>
        <translation>场景: </translation>
    </message>
    <message>
        <source>   ::   Frame: </source>
        <translation>    ::    帧: </translation>
    </message>
    <message>
        <source>   ::   Level: </source>
        <translation>    ::   层级: </translation>
    </message>
    <message>
        <source>Level: </source>
        <translation>层级: </translation>
    </message>
    <message>
        <source>Freeze</source>
        <translation>冻结</translation>
    </message>
    <message>
        <source>Camera Stand View</source>
        <translation>摄影机位视图</translation>
    </message>
    <message>
        <source>3D View</source>
        <translation>3D 视图</translation>
    </message>
    <message>
        <source>Camera View</source>
        <translation>摄影机视图</translation>
    </message>
    <message>
        <source>  ::  Zoom : </source>
        <translation>    ::    缩放: </translation>
    </message>
    <message>
        <source>Safe Area (Right Click to Select)</source>
        <translation>安全区域(右键单击可选择)</translation>
    </message>
    <message>
        <source>Field Guide</source>
        <translation>规格板</translation>
    </message>
</context>
<context>
    <name>ShortcutPopup</name>
    <message>
        <source>Configure Shortcuts</source>
        <translation>配置快捷键</translation>
    </message>
    <message>
        <source>Remove</source>
        <translation>移除</translation>
    </message>
    <message>
        <source>Couldn&apos;t find any matching command.</source>
        <translation>未能找到匹配的命令。</translation>
    </message>
    <message>
        <source>Export Current Shortcuts</source>
        <translation>导出当前的快捷键配置</translation>
    </message>
    <message>
        <source>Delete Current Preset</source>
        <translation>删除当前的预设</translation>
    </message>
    <message>
        <source>Save Current Shortcuts as New Preset</source>
        <translation>保存当前快捷键为新预设</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>应用</translation>
    </message>
    <message>
        <source>Use selected preset as shortcuts</source>
        <translation>使用选中的预设做快捷键</translation>
    </message>
    <message>
        <source>Clear All Shortcuts</source>
        <translation>清除全部快捷键</translation>
    </message>
    <message>
        <source>This will erase ALL shortcuts. Continue?</source>
        <translation>这会抹除全部快捷键。继续吗？</translation>
    </message>
    <message>
        <source>This will overwrite all current shortcuts. Continue?</source>
        <translation>这将覆盖当前的全部快捷键。继续吗？</translation>
    </message>
    <message>
        <source>A file named </source>
        <translation>名为</translation>
    </message>
    <message>
        <source> already exists.  Do you want to replace it?</source>
        <translation>的文件已经存在。您打算替换吗？</translation>
    </message>
    <message>
        <source>OpenToonz - Setting Shortcuts</source>
        <translation>OpenToonz - 设置快捷键</translation>
    </message>
    <message>
        <source>Included presets cannot be deleted.</source>
        <translation>包含的预设没法被删除。</translation>
    </message>
    <message>
        <source>Are you sure you want to delete the preset: </source>
        <translation>您确定要删除该预设:</translation>
    </message>
    <message>
        <source>?</source>
        <translation>？</translation>
    </message>
    <message>
        <source>Load from file...</source>
        <translation>从文件加载...</translation>
    </message>
    <message>
        <source>Load</source>
        <translation>加载</translation>
    </message>
    <message>
        <source>Shortcut Presets</source>
        <translation>快捷键预设</translation>
    </message>
</context>
<context>
    <name>ShortcutTree</name>
    <message>
        <source>Menu Commands</source>
        <translation>菜单命令</translation>
    </message>
    <message>
        <source>File</source>
        <translation>文件</translation>
    </message>
    <message>
        <source>Edit</source>
        <translation>编辑</translation>
    </message>
    <message>
        <source>Scan &amp; Cleanup</source>
        <translation>扫描&amp;清稿</translation>
    </message>
    <message>
        <source>Level</source>
        <translation>层级</translation>
    </message>
    <message>
        <source>Xsheet</source>
        <translation>摄影表</translation>
    </message>
    <message>
        <source>Cells</source>
        <translation>帧格</translation>
    </message>
    <message>
        <source>View</source>
        <translation>视图</translation>
    </message>
    <message>
        <source>Windows</source>
        <translation>窗口</translation>
    </message>
    <message>
        <source>Right-click Menu Commands</source>
        <translation>右键菜单命令</translation>
    </message>
    <message>
        <source>Tools</source>
        <translation>工具</translation>
    </message>
    <message>
        <source>Tool Modifiers</source>
        <translation>工具修改器</translation>
    </message>
    <message>
        <source>Visualization</source>
        <translation>可视化</translation>
    </message>
    <message>
        <source>Playback Controls</source>
        <translation>回放控制</translation>
    </message>
    <message>
        <source>RGBA Channels</source>
        <translation>RGBA 通道</translation>
    </message>
    <message>
        <source>Fill</source>
        <translation>填充</translation>
    </message>
    <message>
        <source>Misc</source>
        <translation>杂项</translation>
    </message>
    <message>
        <source>Playback</source>
        <translation>回放</translation>
    </message>
</context>
<context>
    <name>ShortcutViewer</name>
    <message>
        <source>%1 is already assigned to &apos;%2&apos;
Assign to &apos;%3&apos;?</source>
        <translation>%1 已经分配给了“%2”。
要重新分配给“%3”吗？</translation>
    </message>
    <message>
        <source>Yes</source>
        <translation>是</translation>
    </message>
    <message>
        <source>No</source>
        <translation>否</translation>
    </message>
</context>
<context>
    <name>StackedMenuBar</name>
    <message>
        <source>Files</source>
        <translation>文件</translation>
    </message>
    <message>
        <source>Scan</source>
        <translation>扫描</translation>
    </message>
    <message>
        <source>Settings</source>
        <translation>设置</translation>
    </message>
    <message>
        <source>Processing</source>
        <translation>清稿</translation>
    </message>
    <message>
        <source>Edit</source>
        <translation>编辑</translation>
    </message>
    <message>
        <source>Windows</source>
        <translation>窗口</translation>
    </message>
    <message>
        <source>Other Windows</source>
        <translation>其他窗口</translation>
    </message>
    <message>
        <source>Customize</source>
        <translation>自定</translation>
    </message>
    <message>
        <source>View</source>
        <translation>视图</translation>
    </message>
    <message>
        <source>Tools</source>
        <translation>工具</translation>
    </message>
    <message>
        <source>More Tools</source>
        <translation>更多工具</translation>
    </message>
    <message>
        <source>Checks</source>
        <translation>检查</translation>
    </message>
    <message>
        <source>Render</source>
        <translation>渲染</translation>
    </message>
    <message>
        <source>Draw</source>
        <translation>绘画</translation>
    </message>
    <message>
        <source>Xsheet</source>
        <translation>摄影表</translation>
    </message>
    <message>
        <source>Subxsheet</source>
        <translation>子摄影表</translation>
    </message>
    <message>
        <source>Levels</source>
        <translation>层级</translation>
    </message>
    <message>
        <source>Cells</source>
        <translation>帧格</translation>
    </message>
    <message>
        <source>Reframe</source>
        <translation>重新调节</translation>
    </message>
    <message>
        <source>Step</source>
        <translation>步长</translation>
    </message>
    <message>
        <source>Each</source>
        <translation>缩短帧</translation>
    </message>
    <message>
        <source>File</source>
        <translation>文件</translation>
    </message>
    <message>
        <source>Scan &amp;&amp; Cleanup</source>
        <translation>扫描&amp;&amp;清稿</translation>
    </message>
    <message>
        <source>Level</source>
        <translation>层级</translation>
    </message>
    <message>
        <source>Help</source>
        <translation>帮助</translation>
    </message>
    <message>
        <source>Failed to load menu %1</source>
        <translation>加载菜单 %1 失败</translation>
    </message>
    <message>
        <source>Failed to add command %1</source>
        <translation>添加命令 %1 失败</translation>
    </message>
    <message>
        <source>Cannot open menubar settings file %1</source>
        <translation>无法打开菜单栏设置文件 %1</translation>
    </message>
    <message>
        <source>Failed to create menubar</source>
        <translation>创建菜单栏失败</translation>
    </message>
</context>
<context>
    <name>StartupPopup</name>
    <message>
        <source>OpenToonz Startup</source>
        <translation>OpenToonz 启动</translation>
    </message>
    <message>
        <source>Choose Project</source>
        <translation>选择项目</translation>
    </message>
    <message>
        <source>Create a New Scene</source>
        <translation>创建新场景</translation>
    </message>
    <message>
        <source>Open Scene</source>
        <translation>打开场景</translation>
    </message>
    <message>
        <source>Scene Name:</source>
        <translation>场景名称:</translation>
    </message>
    <message>
        <source>Width:</source>
        <translation>宽度:</translation>
    </message>
    <message>
        <source>Height:</source>
        <translation>高度:</translation>
    </message>
    <message>
        <source>DPI:</source>
        <translation>DPI:</translation>
    </message>
    <message>
        <source>X</source>
        <translation>X</translation>
    </message>
    <message>
        <source>Resolution:</source>
        <translation>分辨率:</translation>
    </message>
    <message>
        <source>Frame Rate:</source>
        <translation>帧速率:</translation>
    </message>
    <message>
        <source>Add</source>
        <translation>添加</translation>
    </message>
    <message>
        <source>Remove</source>
        <translation>删除</translation>
    </message>
    <message>
        <source>Show this at startup</source>
        <translation>启动时显示此窗口</translation>
    </message>
    <message>
        <source>Create Scene</source>
        <translation>创建场景</translation>
    </message>
    <message>
        <source>New Project...</source>
        <translation>新项目...</translation>
    </message>
    <message>
        <source>Open Another Scene...</source>
        <translation>打开其它场景...</translation>
    </message>
    <message>
        <source>pixel</source>
        <translation>像素</translation>
    </message>
    <message>
        <source>cm</source>
        <translation>cm</translation>
    </message>
    <message>
        <source>mm</source>
        <translation>mm</translation>
    </message>
    <message>
        <source>inch</source>
        <translation>inch</translation>
    </message>
    <message>
        <source>field</source>
        <translation>field</translation>
    </message>
    <message>
        <source>Save In:</source>
        <translation>保存位置:</translation>
    </message>
    <message>
        <source>Camera Size:</source>
        <translation>摄影机参数:</translation>
    </message>
    <message>
        <source>Units:</source>
        <translation>单位:</translation>
    </message>
    <message>
        <source>No Recent Scenes</source>
        <translation>无最近场景</translation>
    </message>
    <message>
        <source>The name cannot be empty.</source>
        <translation>名称不能是空的。</translation>
    </message>
    <message>
        <source>The chosen file path is not valid.</source>
        <translation>所选的文件路径无效。</translation>
    </message>
    <message>
        <source>The width must be 1 or more.</source>
        <translation>宽度必须大于等于1。</translation>
    </message>
    <message>
        <source>The height must be 1 or more.</source>
        <translation>高度必须大于等于1。</translation>
    </message>
    <message>
        <source>The frame rate must be 1 or more.</source>
        <translation>帧率必须大于等于1。</translation>
    </message>
    <message>
        <source>Preset name</source>
        <translation>预设名称</translation>
    </message>
    <message>
        <source>Enter the name for %1</source>
        <translation>请给 %1 命名</translation>
    </message>
    <message>
        <source>Error : Preset Name is Invalid</source>
        <translation>错误: 预设名称无效</translation>
    </message>
    <message>
        <source>The preset name must not use &apos;,&apos;(comma).</source>
        <translation>预设名称不能用 ‘,’(逗号)。</translation>
    </message>
    <message>
        <source>Bad camera preset</source>
        <translation>不正确的摄影机预设</translation>
    </message>
    <message>
        <source>&apos;%1&apos; doesn&apos;t seem to be a well formed camera preset.
Possibly the preset file has been corrupted</source>
        <translation>&apos;%1&apos; 不是正确格式的摄影机预设。
可能该预设文件已经被损坏了。</translation>
    </message>
    <message>
        <source>The width must be greater than zero.</source>
        <translation>宽度必须大于零。</translation>
    </message>
    <message>
        <source>The height must be greater than zero.</source>
        <translation>高度必须大于零。</translation>
    </message>
    <message>
        <source>&apos;%1&apos; doesn&apos;t seem to be a well formed camera preset. 
Possibly the preset file has been corrupted</source>
        <translation>&apos;%1&apos; 不是格式完好的摄影机预设，
可能该预设文件已经被损坏了。</translation>
    </message>
</context>
<context>
    <name>StudioPaletteTreeViewer</name>
    <message>
        <source>This folder is not empty. Delete anyway?</source>
        <translation>文件夹不是空的，还要删除马？</translation>
    </message>
    <message>
        <source>New Palette</source>
        <translation>新建调色板</translation>
    </message>
    <message>
        <source>New Folder</source>
        <translation>新建文件夹</translation>
    </message>
    <message>
        <source>New Cleanup Palette</source>
        <translation>新建清稿调色板</translation>
    </message>
    <message>
        <source>Delete Folder</source>
        <translation>删除文件夹</translation>
    </message>
    <message>
        <source>Load into Current Cleaunp Palette</source>
        <translation>加载到当前清稿调色板中</translation>
    </message>
    <message>
        <source>Replace with Current Cleaunp Palette</source>
        <translation>用当前清稿调色板替换</translation>
    </message>
    <message>
        <source>Load into Current Palette</source>
        <translation>加载到当前调色板中</translation>
    </message>
    <message>
        <source>Merge to Current Palette</source>
        <translation>合并到当前调色板上</translation>
    </message>
    <message>
        <source>Replace with Current Palette</source>
        <translation>用当前调色板替换</translation>
    </message>
    <message>
        <source>Delete Palette</source>
        <translation>删除调色板</translation>
    </message>
    <message>
        <source>Search for Palettes</source>
        <translation>搜索调色板</translation>
    </message>
</context>
<context>
    <name>StudioPaletteViewer</name>
    <message>
        <source>&amp;New Folder</source>
        <translation>新建文件夹(&amp;N)</translation>
    </message>
    <message>
        <source>&amp;New Palette</source>
        <translation>新建调色板(&amp;N)</translation>
    </message>
    <message>
        <source>&amp;Delete</source>
        <translation>删除(&amp;D)</translation>
    </message>
</context>
<context>
    <name>SubSheetBar</name>
    <message>
        <source>Sub-scene controls:
Click the arrow button to create a new sub-xsheet</source>
        <translation>子场景控制:
[点按]箭头按钮创建新子摄影表</translation>
    </message>
    <message>
        <source>Disable Edit in Place</source>
        <translation>禁用位置上的编辑</translation>
    </message>
    <message>
        <source>Enable Edit in Place</source>
        <translation>启用位置上的编辑</translation>
    </message>
    <message>
        <source>Exit Sub-xsheet (1 Level Up)</source>
        <translation>退出子摄影表(向上一级)</translation>
    </message>
    <message>
        <source>Exit Sub-xsheet (2 Levels Up)</source>
        <translation>退出子摄影表(向上两级)</translation>
    </message>
    <message>
        <source>Exit Sub-xsheet (3 or More Levels Up)</source>
        <translation>退出子摄影表(向上三级或更多)</translation>
    </message>
    <message>
        <source>Enter Sub-xsheet</source>
        <translation>进入子摄影表</translation>
    </message>
    <message>
        <source>Current Scene</source>
        <translation>当前场景</translation>
    </message>
</context>
<context>
    <name>TApp</name>
    <message>
        <source>Error allocating memory: not enough memory.</source>
        <translation>分配内存出错: 没有足够的内存。</translation>
    </message>
    <message>
        <source>It is not possible to save automatically an untitled scene.</source>
        <translation>无法自动保存未命名的场景。</translation>
    </message>
    <message>
        <source>It is not possible to automatically save an untitled scene.</source>
        <translation>无法自动保存未命名的场景。</translation>
    </message>
</context>
<context>
    <name>TaskSheet</name>
    <message>
        <source>Name:</source>
        <translation>名称:</translation>
    </message>
    <message>
        <source>Status:</source>
        <translation>状态:</translation>
    </message>
    <message>
        <source>Command Line:</source>
        <translation>命令行:</translation>
    </message>
    <message>
        <source>Server:</source>
        <translation>服务器:</translation>
    </message>
    <message>
        <source>Submitted By:</source>
        <translation>提交者:</translation>
    </message>
    <message>
        <source>Submitted On:</source>
        <translation>提交位置:</translation>
    </message>
    <message>
        <source>Submission Date:</source>
        <translation>提交日期:</translation>
    </message>
    <message>
        <source>Start Date:</source>
        <translation>开始日期:</translation>
    </message>
    <message>
        <source>Completion Date:</source>
        <translation>完成日期:</translation>
    </message>
    <message>
        <source>Duration:</source>
        <translation>处理时间:</translation>
    </message>
    <message>
        <source>Step Count:</source>
        <translation>步数;</translation>
    </message>
    <message>
        <source>Failed Steps:</source>
        <translation>失的步数:</translation>
    </message>
    <message>
        <source>Successful Steps:</source>
        <translation>成功歩数:</translation>
    </message>
    <message>
        <source>Priority:</source>
        <translation>优先级:</translation>
    </message>
    <message>
        <source>Output:</source>
        <translation>输出:</translation>
    </message>
    <message>
        <source>Frames per Chunk:</source>
        <translation>每块的帧数:</translation>
    </message>
    <message>
        <source>From:</source>
        <translation>开始:</translation>
    </message>
    <message>
        <source>To:</source>
        <translation>结束:</translation>
    </message>
    <message>
        <source>Step:</source>
        <translation>步长:</translation>
    </message>
    <message>
        <source>Shrink:</source>
        <translation>收缩:</translation>
    </message>
    <message>
        <source>Multiple Rendering:</source>
        <translation>多重渲染:</translation>
    </message>
    <message>
        <source>None</source>
        <translation>无</translation>
    </message>
    <message>
        <source>Fx Schematic Flows</source>
        <translation>特效示意图流程</translation>
    </message>
    <message>
        <source>Fx Schematic Terminal Nodes</source>
        <translation>特效示意图终端节点</translation>
    </message>
    <message>
        <source>Dedicated CPUs:</source>
        <translation>专用 CPU 数:</translation>
    </message>
    <message>
        <source>Single</source>
        <translation>一个</translation>
    </message>
    <message>
        <source>Half</source>
        <translation>一半</translation>
    </message>
    <message>
        <source>All</source>
        <translation>全部</translation>
    </message>
    <message>
        <source>Render Tile:</source>
        <translation>渲染区块:</translation>
    </message>
    <message>
        <source>Large</source>
        <translation>大</translation>
    </message>
    <message>
        <source>Medium</source>
        <translation>中</translation>
    </message>
    <message>
        <source>Small</source>
        <translation>小</translation>
    </message>
    <message>
        <source>Visible Only</source>
        <translation>仅可见</translation>
    </message>
    <message>
        <source>Overwrite</source>
        <translation>覆盖</translation>
    </message>
    <message>
        <source>Dependencies:</source>
        <translation>依赖项:</translation>
    </message>
    <message>
        <source>Remove -&gt;</source>
        <translation>素材 -&gt;</translation>
    </message>
    <message>
        <source>&lt;- Add</source>
        <translation>&lt;- 添加</translation>
    </message>
    <message>
        <source>Multimedia:</source>
        <translation>多媒体:</translation>
    </message>
    <message>
        <source>NoPaint</source>
        <translation>不上色</translation>
    </message>
    <message>
        <source>Off</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>Remove &gt;&gt;</source>
        <translation>删除 &gt;&gt;</translation>
    </message>
    <message>
        <source>&lt;&lt; Add</source>
        <translation>&lt;&lt; 添加</translation>
    </message>
</context>
<context>
    <name>TaskTreeModel</name>
    <message>
        <source>Are you sure you want to remove ALL tasks?</source>
        <translation>确实要素材所有任务吗？</translation>
    </message>
    <message>
        <source>Remove All</source>
        <translation>全部删除</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
</context>
<context>
    <name>TaskTreeView</name>
    <message>
        <source>Start</source>
        <translation>开始</translation>
    </message>
    <message>
        <source>Stop</source>
        <translation>停止</translation>
    </message>
    <message>
        <source>Remove</source>
        <translation>删除</translation>
    </message>
</context>
<context>
    <name>TasksViewer</name>
    <message>
        <source>&amp;Start</source>
        <translation>开始(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Stop</source>
        <translation>停止(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Add Render Task</source>
        <translation>添加渲染任务(&amp;A)</translation>
    </message>
    <message>
        <source>&amp;Add Cleanup Task</source>
        <translation>添加清稿任务(&amp;A)</translation>
    </message>
    <message>
        <source>&amp;Save Task List</source>
        <translation>保存任务列表(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Save Task List As</source>
        <translation>另存任务列表(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Load Task List</source>
        <translation>加载任务列表(&amp;L)</translation>
    </message>
    <message>
        <source>&amp;Remove</source>
        <translation>素材(&amp;R)</translation>
    </message>
    <message>
        <source>Start</source>
        <translation>开始</translation>
    </message>
    <message>
        <source>Stop</source>
        <translation>停止</translation>
    </message>
    <message>
        <source>Add Render</source>
        <translation>添加渲染</translation>
    </message>
    <message>
        <source>Add Cleanup</source>
        <translation>添加清稿</translation>
    </message>
    <message>
        <source>Save</source>
        <translation>保存</translation>
    </message>
    <message>
        <source>Save As</source>
        <translation>另存为</translation>
    </message>
    <message>
        <source>Load</source>
        <translation>加载</translation>
    </message>
    <message>
        <source>Remove</source>
        <translation>删除</translation>
    </message>
</context>
<context>
    <name>TestPanel</name>
    <message>
        <source>Left:</source>
        <translation>左:</translation>
    </message>
    <message>
        <source>Right:</source>
        <translation>右:</translation>
    </message>
</context>
<context>
    <name>TimeStretchPopup</name>
    <message>
        <source>Time Stretch</source>
        <translation>时间伸缩</translation>
    </message>
    <message>
        <source>Selected Cells</source>
        <translation>所选帧格</translation>
    </message>
    <message>
        <source>Selected Frame Range</source>
        <translation>所选帧范围</translation>
    </message>
    <message>
        <source>Whole Xsheet</source>
        <translation>整个摄影表</translation>
    </message>
    <message>
        <source>Stretch:</source>
        <translation>伸缩:</translation>
    </message>
    <message>
        <source>Old Range:</source>
        <translation>旧范围:</translation>
    </message>
    <message>
        <source>Stretch</source>
        <translation>伸缩</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>New Range:</source>
        <translation>新范围:</translation>
    </message>
</context>
<context>
    <name>TimelineWidget</name>
    <message>
        <source>Recent Version</source>
        <translation>最近版本</translation>
    </message>
    <message>
        <source>Older Version</source>
        <translation>旧版本</translation>
    </message>
</context>
<context>
    <name>TopBar</name>
    <message>
        <source>Lock Rooms Tab</source>
        <translation>锁定工作区选项卡</translation>
    </message>
</context>
<context>
    <name>TrackerPopup</name>
    <message>
        <source>Tracking Settings</source>
        <translation>追踪设置</translation>
    </message>
    <message>
        <source>Threshold:</source>
        <translation>阈值:</translation>
    </message>
    <message>
        <source>Sensitivity:</source>
        <translation>灵敏度:</translation>
    </message>
    <message>
        <source>Variable Region Size</source>
        <translation>可变范围大小</translation>
    </message>
    <message>
        <source>Include Background</source>
        <translation>包含背景</translation>
    </message>
    <message>
        <source>Processing...</source>
        <translation>正在处理...</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Track</source>
        <translation>追踪</translation>
    </message>
</context>
<context>
    <name>VectorizerPopup</name>
    <message>
        <source>Convert-to-Vector Settings</source>
        <translation>转换为矢量 设置</translation>
    </message>
    <message>
        <source>The current selection is invalid.</source>
        <translation>当前选区无效。</translation>
    </message>
    <message>
        <source>Cannot convert to vector the current selection.</source>
        <translation>无法把当前选区转换为矢量。</translation>
    </message>
    <message>
        <source>Centerline</source>
        <translation>中心线</translation>
    </message>
    <message>
        <source>Outline</source>
        <translation>轮廓线</translation>
    </message>
    <message>
        <source>Preserve Painted Areas</source>
        <translation>保留上色区域</translation>
    </message>
    <message>
        <source>TLV Levels</source>
        <translation>TLV 层级</translation>
    </message>
    <message>
        <source>Convert</source>
        <translation>转换</translation>
    </message>
    <message>
        <source>Add Border</source>
        <translation>添加边界</translation>
    </message>
    <message>
        <source>Conversion in progress: </source>
        <translation>正在进行转换: </translation>
    </message>
    <message>
        <source>Raster Levels</source>
        <translation>光栅层级</translation>
    </message>
    <message>
        <source>Toggle Swatch Preview</source>
        <translation>显示/隐藏样本预览</translation>
    </message>
    <message>
        <source>Toggle Centerlines Check</source>
        <translation>显示/隐藏中心线检查</translation>
    </message>
    <message>
        <source>Corners</source>
        <translation>角:</translation>
    </message>
    <message>
        <source>Start:</source>
        <translation>开始:</translation>
    </message>
    <message>
        <source>End:</source>
        <translation>结束:</translation>
    </message>
    <message>
        <source>Full color non-AA images</source>
        <translation>全色非 AA 图像</translation>
    </message>
    <message>
        <source>Enhanced ink recognition</source>
        <translation>增强描线识别</translation>
    </message>
    <message>
        <source>Save Settings</source>
        <translation>保存设置</translation>
    </message>
    <message>
        <source>Load Settings</source>
        <translation>加载设置</translation>
    </message>
    <message>
        <source>Reset Settings</source>
        <translation>重置设置</translation>
    </message>
    <message>
        <source>File could not be opened for read</source>
        <translation>文件不能打开读取</translation>
    </message>
    <message>
        <source>File could not be opened for write</source>
        <translation>文件不能打开写入</translation>
    </message>
    <message>
        <source>Save Vectorizer Parameters</source>
        <translation>保存矢量化的参数</translation>
    </message>
    <message>
        <source>Load Vectorizer Parameters</source>
        <translation>加载矢量化的参数</translation>
    </message>
    <message>
        <source>Mode</source>
        <translation>模式</translation>
    </message>
    <message>
        <source>Threshold</source>
        <translation>阈值</translation>
    </message>
    <message>
        <source>Accuracy</source>
        <translation>精度</translation>
    </message>
    <message>
        <source>Despeckling</source>
        <translation>去斑</translation>
    </message>
    <message>
        <source>Max Thickness</source>
        <translation>最大粗细</translation>
    </message>
    <message>
        <source>Thickness Calibration</source>
        <translation>粗细校准</translation>
    </message>
    <message>
        <source>Adherence</source>
        <translation>遵循</translation>
    </message>
    <message>
        <source>Angle</source>
        <translation>角度</translation>
    </message>
    <message>
        <source>Curve Radius</source>
        <translation>曲线半径</translation>
    </message>
    <message>
        <source>Max Colors</source>
        <translation>最大色数</translation>
    </message>
    <message>
        <source>Transparent Color</source>
        <translation>透明颜色</translation>
    </message>
    <message>
        <source>Tone Threshold</source>
        <translation>色调阈值</translation>
    </message>
</context>
<context>
    <name>VersionControl</name>
    <message>
        <source>The version control configuration file is empty or wrongly defined.
Please refer to the user guide for details.</source>
        <translation>版本控制配置文件是空的或错误定义。
请参考用户手册以获得更多细节。</translation>
    </message>
    <message>
        <source>The version control client application specified on the configuration file cannot be found.
Please refer to the user guide for details.</source>
        <translation>找不到版本控制客户端程序所指定的配置文件。
请参考用户手册以获得更多细节。</translation>
    </message>
    <message>
        <source>The version control client application is not installed on your computer.
Subversion 1.5 or later is required.
Please refer to the user guide for details.</source>
        <translation>您的电脑没有安装版本控制客户端程序。
要求 Subversion 1.5 或更新版。
请参考用户手册以获得更多细节。</translation>
    </message>
    <message>
        <source>The version control client application installed on your computer needs to be updated, otherwise some features may not be available.
Subversion 1.5 or later is required.
Please refer to the user guide for details.</source>
        <translation>您电脑上安装的版本控制客户端程序需要更新，否则没法使用某些功能。
要求 Subversion 1.5 或更新版。
请参考用户手册以获得更多细节。</translation>
    </message>
</context>
<context>
    <name>ViewerHistogramPopup</name>
    <message>
        <source>Viewer Histogram</source>
        <translation>查看器直方图</translation>
    </message>
</context>
<context>
    <name>XsheetGUI::CellArea</name>
    <message>
        <source>Click to select keyframe, drag to move it</source>
        <translation>[点按]以选择关键帧，[拖动]以移动它</translation>
    </message>
    <message>
        <source>Click and drag to set the acceleration range</source>
        <translation>[点按并拖动]以设置加速范围</translation>
    </message>
    <message>
        <source>Click and drag to set the deceleration range</source>
        <translation>[点按并拖动]以设置减速范围</translation>
    </message>
    <message>
        <source>Set the cycle of previous keyframes</source>
        <translation>设置循环前面的关键帧</translation>
    </message>
    <message>
        <source>Click and drag to move the selection</source>
        <translation>[点按并拖动]以移动选区</translation>
    </message>
    <message>
        <source>Click and drag to play</source>
        <translation>[点按并移动]以播放</translation>
    </message>
    <message>
        <source>Click and drag to repeat selected cells</source>
        <translation>[点按并拖动]以重复所选的帧格</translation>
    </message>
    <message>
        <source>Open Memo</source>
        <translation>打开便签</translation>
    </message>
    <message>
        <source>Delete Memo</source>
        <translation>删除便签</translation>
    </message>
    <message>
        <source>Reframe</source>
        <translation>重新调节</translation>
    </message>
    <message>
        <source>Step</source>
        <translation>步长</translation>
    </message>
    <message>
        <source>Each</source>
        <translation>缩短帧</translation>
    </message>
    <message>
        <source>Replace</source>
        <translation>替换</translation>
    </message>
</context>
<context>
    <name>XsheetGUI::ColumnArea</name>
    <message>
        <source>Click to select camera</source>
        <translation>[点按]以选择摄影机</translation>
    </message>
    <message>
        <source>Camera Stand Toggle</source>
        <translation>显示/隐藏摄影机位</translation>
    </message>
    <message>
        <source>Render Toggle</source>
        <translation>显示/隐藏渲染</translation>
    </message>
    <message>
        <source>Lock Toggle</source>
        <translation>切换锁定</translation>
    </message>
    <message>
        <source>Click to play the soundtrack back</source>
        <translation>[点按]以播放音轨 back</translation>
    </message>
    <message>
        <source>Set the volume of the soundtrack</source>
        <translation>设置音轨的音量</translation>
    </message>
    <message>
        <source>Click to select the type of motion path</source>
        <translation>[点按]以选择运动路径类型</translation>
    </message>
    <message>
        <source>Click to select column, drag to move it</source>
        <translation>[点按]以选择列，[拖动]以移动它</translation>
    </message>
    <message>
        <source>Click to unlink column</source>
        <translation>[点按]以取消列的链接</translation>
    </message>
    <message>
        <source>Click and drag to link column</source>
        <translation>[点按并拖动]以链接列</translation>
    </message>
    <message>
        <source>Master column of linked columns</source>
        <translation>相链接列的主列</translation>
    </message>
    <message>
        <source>&amp;Subsampling 1</source>
        <translation>子采样 1(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Subsampling 2</source>
        <translation>子采样 2(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Subsampling 3</source>
        <translation>子采样 3(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Subsampling 4</source>
        <translation>子采样 4(&amp;S)</translation>
    </message>
    <message>
        <source>Preview Visibility Toggle</source>
        <translation>切换预览的可见性</translation>
    </message>
    <message>
        <source>Camera Stand Visibility Toggle</source>
        <translation>切换摄影机位的可见性</translation>
    </message>
    <message>
        <source>Alt + Click to Toggle Thumbnail</source>
        <translation>[Alt + 点按]以显示/隐藏缩略图</translation>
    </message>
    <message>
        <source>Reframe</source>
        <translation>重新调节</translation>
    </message>
    <message>
        <source>Subsampling</source>
        <translation>子采样</translation>
    </message>
</context>
<context>
    <name>XsheetGUI::ColumnTransparencyPopup</name>
    <message>
        <source>None</source>
        <translation>无</translation>
    </message>
    <message>
        <source>Red</source>
        <translation>红</translation>
    </message>
    <message>
        <source>Green</source>
        <translation>绿</translation>
    </message>
    <message>
        <source>Blue</source>
        <translation>蓝</translation>
    </message>
    <message>
        <source>DarkYellow</source>
        <translation>暗黄</translation>
    </message>
    <message>
        <source>DarkCyan</source>
        <translation>暗青</translation>
    </message>
    <message>
        <source>DarkMagenta</source>
        <translation>暗红</translation>
    </message>
    <message>
        <source>N.B. Filter doesn&apos;t affect vector levels</source>
        <translation>N.B.过滤器对矢量层级无效</translation>
    </message>
    <message>
        <source>Filter:</source>
        <translation>过滤器:</translation>
    </message>
</context>
<context>
    <name>XsheetGUI::NoteArea</name>
    <message>
        <source>Frame</source>
        <translation>帧</translation>
    </message>
    <message>
        <source>Sec Frame</source>
        <translation>秒 帧</translation>
    </message>
    <message>
        <source>6sec Sheet</source>
        <translation>6秒表</translation>
    </message>
    <message>
        <source>3sec Sheet</source>
        <translation>3秒表</translation>
    </message>
</context>
<context>
    <name>XsheetGUI::NotePopup</name>
    <message>
        <source>Memo</source>
        <translation>便签</translation>
    </message>
    <message>
        <source>Post</source>
        <translation>张贴</translation>
    </message>
    <message>
        <source>Discard</source>
        <translation>丢弃</translation>
    </message>
</context>
<context>
    <name>XsheetGUI::RowArea</name>
    <message>
        <source>Onion Skin Toggle</source>
        <translation>显示/隐藏洋葱皮</translation>
    </message>
    <message>
        <source>Current Frame</source>
        <translation>当前帧</translation>
    </message>
    <message>
        <source>Relative Onion Skin Toggle</source>
        <translation>显示/隐藏相关洋葱皮</translation>
    </message>
    <message>
        <source>Fixed Onion Skin Toggle</source>
        <translation>显示/隐藏固定洋葱皮</translation>
    </message>
    <message>
        <source>Playback Start Marker</source>
        <translation>回放开始标记</translation>
    </message>
    <message>
        <source>Playback End Marker</source>
        <translation>回放结束标记</translation>
    </message>
    <message>
        <source>Set Start Marker</source>
        <translation>设置开始标记</translation>
    </message>
    <message>
        <source>Set Stop Marker</source>
        <translation>设置停止标记</translation>
    </message>
    <message>
        <source>Remove Markers</source>
        <translation>删除标记</translation>
    </message>
    <message>
        <source>Curren Frame</source>
        <translation>当前帧</translation>
    </message>
    <message>
        <source>Preview This</source>
        <translation>预览此帧</translation>
    </message>
    <message>
        <source>Double Click to Toggle Onion Skin</source>
        <translation>[双击]以显示/隐藏洋葱皮</translation>
    </message>
    <message>
        <source>Pinned Center : Col%1%2</source>
        <translation>钉住了的中心: 列%1%2</translation>
    </message>
    <message>
        <source>Set Auto Markers</source>
        <translation>设置自动标注</translation>
    </message>
</context>
<context>
    <name>XsheetGUI::Toolbar</name>
    <message>
        <source>New Vector Level</source>
        <translation>新矢量层级</translation>
    </message>
    <message>
        <source>New Toonz Raster Level</source>
        <translation>新Toonz光栅层级</translation>
    </message>
    <message>
        <source>New Raster Level</source>
        <translation>新光栅层级</translation>
    </message>
</context>
<context>
    <name>XsheetViewer</name>
    <message>
        <source>Untitled</source>
        <translation>未命名</translation>
    </message>
    <message>
        <source>Scene: </source>
        <translation>场景: </translation>
    </message>
    <message>
        <source> Frames</source>
        <translation> 帧</translation>
    </message>
    <message>
        <source>  (Sub)</source>
        <translation>  (子)</translation>
    </message>
    <message>
        <source>  Level: </source>
        <translation>层级: </translation>
    </message>
    <message>
        <source>   Selected: </source>
        <translation>      选中: </translation>
    </message>
    <message>
        <source> frame : </source>
        <translation> 帧: </translation>
    </message>
    <message>
        <source> frames * </source>
        <translation> 帧 * </translation>
    </message>
    <message>
        <source> column</source>
        <translation> 列</translation>
    </message>
    <message>
        <source> columns</source>
        <translation> 列</translation>
    </message>
</context>
</TS>