<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.1" language="zh_CN">
<context>
    <name>AddFxContextMenu</name>
    <message>
        <source>Insert FX</source>
        <translation>插入特效</translation>
    </message>
    <message>
        <source>Add FX</source>
        <translation>添加特效</translation>
    </message>
    <message>
        <source>Replace FX</source>
        <translation>替换特效</translation>
    </message>
    <message>
        <source>Insert </source>
        <translation>插入 </translation>
    </message>
    <message>
        <source>Add </source>
        <translation>添加 </translation>
    </message>
    <message>
        <source>Replace </source>
        <translation>替换 </translation>
    </message>
</context>
<context>
    <name>AdjustPaletteDialog</name>
    <message>
        <source>Adjust Current Level to This Palette</source>
        <translation>调整当前层级到此调色板</translation>
    </message>
    <message>
        <source>Tolerance</source>
        <translation>容差</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>应用</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
</context>
<context>
    <name>CameraPainter</name>
    <message>
        <source>&amp;Reset Center</source>
        <translation>重置中点(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Activate</source>
        <translation>激活(&amp;A)</translation>
    </message>
</context>
<context>
    <name>CameraSettingsWidget</name>
    <message>
        <source>Width:</source>
        <translation type="vanished">宽度：</translation>
    </message>
    <message>
        <source>Height:</source>
        <translation type="vanished">高度：</translation>
    </message>
    <message>
        <source>XPx:</source>
        <translation type="vanished">XPx:</translation>
    </message>
    <message>
        <source>XDpi:</source>
        <translation type="vanished">XDpi:</translation>
    </message>
    <message>
        <source>YDpi:</source>
        <translation type="vanished">YDpi:</translation>
    </message>
    <message>
        <source>Use Current Level Settings</source>
        <translation>使用当前层级设定</translation>
    </message>
    <message>
        <source>Bad camera preset</source>
        <translation>不正确的相机预设</translation>
    </message>
    <message>
        <source>&apos;%1&apos; doesn&apos;t seem a well formed camera preset. 
Possibly the preset file has been corrupted</source>
        <translation>&apos;%1&apos; 不像是正确格式的相机预设。
预设文件可能已经损坏了</translation>
    </message>
    <message>
        <source>Preset name</source>
        <translation>预设名</translation>
    </message>
    <message>
        <source>Enter the name for %1</source>
        <translation>输 %1 的名字</translation>
    </message>
    <message>
        <source>YPx:</source>
        <translation type="vanished">YPx：</translation>
    </message>
    <message>
        <source>AR:</source>
        <translation type="vanished">AR：</translation>
    </message>
    <message>
        <source>Add</source>
        <translation>添加</translation>
    </message>
    <message>
        <source>Remove</source>
        <translation>移除</translation>
    </message>
    <message>
        <source>Force Squared Pixel</source>
        <translation>强制方形像素</translation>
    </message>
    <message>
        <source>Error : Preset Name is Invalid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>The preset name must not use &apos;,&apos;(comma).</source>
        <translation type="unfinished">预设名中不能使用 &apos;,&apos;(逗号)。</translation>
    </message>
</context>
<context>
    <name>ChannelHisto</name>
    <message>
        <source>Red</source>
        <translation>红</translation>
    </message>
    <message>
        <source>Green</source>
        <translation>绿</translation>
    </message>
    <message>
        <source>Blue</source>
        <translation>蓝</translation>
    </message>
    <message>
        <source>Alpha</source>
        <translation>透明度</translation>
    </message>
    <message>
        <source>RGBA</source>
        <translation>RGBA</translation>
    </message>
</context>
<context>
    <name>CleanupCameraSettingsWidget</name>
    <message>
        <source>Closest:</source>
        <translation type="vanished">最靠近的：</translation>
    </message>
    <message>
        <source>E/W:</source>
        <translation type="vanished">东西向：</translation>
    </message>
    <message>
        <source>N/S:</source>
        <translation type="vanished">南北向：</translation>
    </message>
    <message>
        <source>DPI:</source>
        <translation type="vanished">DPI：</translation>
    </message>
    <message>
        <source>Name:</source>
        <translation type="vanished">名称：</translation>
    </message>
    <message>
        <source>Path:</source>
        <translation type="vanished">路径：</translation>
    </message>
    <message>
        <source>Field settings</source>
        <translation type="vanished">格子设定</translation>
    </message>
    <message>
        <source>XPx:</source>
        <translation type="vanished">XPx：</translation>
    </message>
    <message>
        <source>YPx:</source>
        <translation type="vanished">YPx：</translation>
    </message>
    <message>
        <source>Resulting Level Info</source>
        <translation type="vanished">完成层级信息</translation>
    </message>
</context>
<context>
    <name>ColumnPainter</name>
    <message>
        <source>&amp;Reset Center</source>
        <translation>重置中心(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Open Subxsheet</source>
        <translation>打开子摄影表(&amp;O)</translation>
    </message>
</context>
<context>
    <name>DVGui</name>
    <message>
        <source>OK</source>
        <translation>确定</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
</context>
<context>
    <name>DVGui::CleanupColorField</name>
    <message>
        <source>Brightness:</source>
        <translation>亮度：</translation>
    </message>
    <message>
        <source>Contrast:</source>
        <translation>对比度：</translation>
    </message>
    <message>
        <source>Color Threshold</source>
        <translation type="vanished">颜色阀值</translation>
    </message>
    <message>
        <source>White Threshold</source>
        <translation type="vanished">白场阀值</translation>
    </message>
    <message>
        <source>H Range</source>
        <translation>色相范围</translation>
    </message>
    <message>
        <source>Line Width</source>
        <translation>线宽</translation>
    </message>
    <message>
        <source>Color Thres</source>
        <translation>颜色阀值</translation>
    </message>
    <message>
        <source>White Thres</source>
        <translation>白场阀值</translation>
    </message>
</context>
<context>
    <name>DVGui::DvTextEdit</name>
    <message>
        <source>Bold</source>
        <translation>粗体</translation>
    </message>
    <message>
        <source>Italic</source>
        <translation>斜体</translation>
    </message>
    <message>
        <source>Underline</source>
        <translation>下划线</translation>
    </message>
    <message>
        <source>Align Left</source>
        <translation>左对齐</translation>
    </message>
    <message>
        <source>Align Center</source>
        <translation>居中对齐</translation>
    </message>
    <message>
        <source>Align Right</source>
        <translation>右对齐</translation>
    </message>
</context>
<context>
    <name>DVGui::FileField</name>
    <message>
        <source>...</source>
        <translation>...</translation>
    </message>
</context>
<context>
    <name>DVGui::LineEdit</name>
    <message>
        <source>A file name cannot contains any of the following chracters: /\:*?&quot;&lt;&gt;|.</source>
        <translation>文件名不可以包含如下的任一字符： /\:*?&quot;&lt;&gt;|。</translation>
    </message>
</context>
<context>
    <name>DVGui::ProgressDialog</name>
    <message>
        <source>Toonz</source>
        <translation>OpenToonz</translation>
    </message>
</context>
<context>
    <name>DVGui::RadioButtonDialog</name>
    <message>
        <source>Toonz</source>
        <translation>OpenToonz</translation>
    </message>
</context>
<context>
    <name>DVGui::ToneCurveField</name>
    <message>
        <source>Channel:</source>
        <translation>通道：</translation>
    </message>
</context>
<context>
    <name>DVGui::ValidatedChoiceDialog</name>
    <message>
        <source>Apply</source>
        <translation>应用</translation>
    </message>
    <message>
        <source>Apply to All</source>
        <translation>全部应用</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
</context>
<context>
    <name>DvTextEdit</name>
    <message>
        <source>Bold</source>
        <translation type="vanished">粗体</translation>
    </message>
    <message>
        <source>Italic</source>
        <translation type="vanished">斜体</translation>
    </message>
    <message>
        <source>Underline</source>
        <translation type="vanished">下划线</translation>
    </message>
    <message>
        <source>Align Left</source>
        <translation type="vanished">左对齐</translation>
    </message>
    <message>
        <source>Align Center</source>
        <translation type="vanished">居中对齐</translation>
    </message>
    <message>
        <source>Align Right</source>
        <translation type="vanished">右对齐</translation>
    </message>
</context>
<context>
    <name>EaseInOutSegmentPage</name>
    <message>
        <source>Ease In:</source>
        <translation>缓入：</translation>
    </message>
    <message>
        <source>Ease Out:</source>
        <translation>缓出：</translation>
    </message>
</context>
<context>
    <name>FileField</name>
    <message>
        <source>...</source>
        <translation type="vanished">...</translation>
    </message>
</context>
<context>
    <name>FileSegmentPage</name>
    <message>
        <source>File Path:</source>
        <translation>文件路径：</translation>
    </message>
    <message>
        <source>Column:</source>
        <translation>列：</translation>
    </message>
    <message>
        <source>Unit:</source>
        <translation>单位：</translation>
    </message>
</context>
<context>
    <name>FlipConsole</name>
    <message>
        <source> FPS </source>
        <translation>FPS</translation>
    </message>
    <message>
        <source>Save</source>
        <translation>保存</translation>
    </message>
    <message>
        <source>Snapshot</source>
        <translation>快照</translation>
    </message>
    <message>
        <source>Define Sub-camera</source>
        <translation>定义子相机</translation>
    </message>
    <message>
        <source>Background Colors</source>
        <translation>背景色</translation>
    </message>
    <message>
        <source>Framerate</source>
        <translation>帧率</translation>
    </message>
    <message>
        <source>Playback Controls</source>
        <translation>回放控制</translation>
    </message>
    <message>
        <source>Color Channels</source>
        <translation>颜色通道</translation>
    </message>
    <message>
        <source>Set Key</source>
        <translation>设定键</translation>
    </message>
    <message>
        <source>Histogram</source>
        <translation>直方图</translation>
    </message>
    <message>
        <source>&amp;Save Images</source>
        <translation>保存图像(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Snapshot</source>
        <translation>快照(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Compare to Snapshot</source>
        <translation>和快照比较(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Define Sub-camera</source>
        <translation>定义子相机(&amp;D)</translation>
    </message>
    <message>
        <source>&amp;White Background</source>
        <translation>白背景(&amp;W)</translation>
    </message>
    <message>
        <source>&amp;Black Background</source>
        <translation>黑背景(&amp;B)</translation>
    </message>
    <message>
        <source>&amp;Checkered Background</source>
        <translation>棋盘格背景(&amp;C)</translation>
    </message>
    <message>
        <source>Set the playback frame rate</source>
        <translation>设置回放帧率</translation>
    </message>
    <message>
        <source>&amp;First Frame</source>
        <translation>第一帧(&amp;F)</translation>
    </message>
    <message>
        <source>&amp;Previous Frame</source>
        <translation>前一帧(&amp;P)</translation>
    </message>
    <message>
        <source>Pause</source>
        <translation>暂停</translation>
    </message>
    <message>
        <source>Play</source>
        <translation>播放</translation>
    </message>
    <message>
        <source>Loop</source>
        <translation>循环</translation>
    </message>
    <message>
        <source>&amp;Next frame</source>
        <translation>下一帧(&amp;N)</translation>
    </message>
    <message>
        <source>&amp;Last Frame</source>
        <translation>最后一帧(&amp;L)</translation>
    </message>
    <message>
        <source>Red Channel</source>
        <translation>红通道</translation>
    </message>
    <message>
        <source>Red Channel in Grayscale</source>
        <translation>红通道（灰阶）</translation>
    </message>
    <message>
        <source>Green Channel</source>
        <translation>绿通道</translation>
    </message>
    <message>
        <source>Green Channel in Grayscale</source>
        <translation>绿通道（灰阶）</translation>
    </message>
    <message>
        <source>Blue Channel</source>
        <translation>蓝通道</translation>
    </message>
    <message>
        <source>Blue Channel in Grayscale</source>
        <translation>蓝通道（灰阶）</translation>
    </message>
    <message>
        <source>Alpha Channel</source>
        <translation>透明通道
</translation>
    </message>
    <message>
        <source>&amp;Soundtrack </source>
        <translation>声轨(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Histogram</source>
        <translation>直方图(&amp;H)</translation>
    </message>
    <message>
        <source> FPS	</source>
        <translation> FPS→</translation>
    </message>
    <message>
        <source> Frame  </source>
        <translation type="vanished"> 帧  </translation>
    </message>
    <message>
        <source>Set the current frame</source>
        <translation>设置当前帧</translation>
    </message>
    <message>
        <source>Drag to play the animation</source>
        <translation>拖动播放动画</translation>
    </message>
    <message>
        <source>Define Loading Box</source>
        <translation>定义加载框</translation>
    </message>
    <message>
        <source>Use Loading Box</source>
        <translation>使用加载框</translation>
    </message>
    <message>
        <source>&amp;Define Loading Box</source>
        <translation>定义加载框(&amp;D)</translation>
    </message>
    <message>
        <source>&amp;Use Loading Box</source>
        <translation>使用加载框(&amp;U)</translation>
    </message>
    <message>
        <source>Display Areas as Filled</source>
        <translation>将区域显示为已填充</translation>
    </message>
    <message>
        <source>&amp;Display Areas as Filled</source>
        <translation>将区域显示为已填充(&amp;D)</translation>
    </message>
</context>
<context>
    <name>FrameNavigator</name>
    <message>
        <source>Previous Frame</source>
        <translation>上一帧</translation>
    </message>
    <message>
        <source>Next Frame</source>
        <translation>下一帧</translation>
    </message>
</context>
<context>
    <name>FunctionExpressionSegmentPage</name>
    <message>
        <source>Expression:</source>
        <translation>表达式：</translation>
    </message>
    <message>
        <source>Unit:</source>
        <translation>单位：</translation>
    </message>
    <message>
        <source>There is a circular reference in the definition of the interpolation.</source>
        <translation>插值定义中存在循环引用。</translation>
    </message>
</context>
<context>
    <name>FunctionPanel</name>
    <message>
        <source>Link Handles</source>
        <translation>链接手柄</translation>
    </message>
    <message>
        <source>Unlink Handles</source>
        <translation>分开手柄</translation>
    </message>
    <message>
        <source>Reset Handles</source>
        <translation>重置手柄</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation>删除</translation>
    </message>
    <message>
        <source>Set Key</source>
        <translation>设定键</translation>
    </message>
    <message>
        <source>Activate Cycle</source>
        <translation>激活循环</translation>
    </message>
    <message>
        <source>Deactivate Cycle</source>
        <translation>不激活循环</translation>
    </message>
    <message>
        <source>Linear Interpolation</source>
        <translation>线性插值</translation>
    </message>
    <message>
        <source>Speed In / Speed Out Interpolation</source>
        <translation>速进/速出插值</translation>
    </message>
    <message>
        <source>Ease In / Ease Out Interpolation</source>
        <translation>缓入/缓出插值</translation>
    </message>
    <message>
        <source>Ease In / Ease Out (%) Interpolation</source>
        <translation>缓入/缓出(%)插值</translation>
    </message>
    <message>
        <source>Exponential Interpolation</source>
        <translation>指数运算插值</translation>
    </message>
    <message>
        <source>Expression Interpolation</source>
        <translation>表达式插值</translation>
    </message>
    <message>
        <source>File Interpolation</source>
        <translation>文件插值</translation>
    </message>
    <message>
        <source>Constant Interpolation</source>
        <translation>恒定插值</translation>
    </message>
    <message>
        <source>Fit Selection</source>
        <translation>适合到所选</translation>
    </message>
    <message>
        <source>Fit</source>
        <translation>适合</translation>
    </message>
    <message>
        <source>Similar Shape Interpolation</source>
        <translation>相似图形插值</translation>
    </message>
    <message>
        <source>Step 1</source>
        <translation>步长为1</translation>
    </message>
    <message>
        <source>Step 2</source>
        <translation>步长为2</translation>
    </message>
    <message>
        <source>Step 3</source>
        <translation>步长为3</translation>
    </message>
    <message>
        <source>Step 4</source>
        <translation>步长为4</translation>
    </message>
    <message>
        <source>Function Curves</source>
        <translation>动画曲线</translation>
    </message>
    <message>
        <source>Smooth</source>
        <translation>平滑</translation>
    </message>
    <message>
        <source>Frame Based</source>
        <translation>基于帧</translation>
    </message>
    <message>
        <source>Curve Shape</source>
        <translation>曲线形状</translation>
    </message>
</context>
<context>
    <name>FunctionSegmentViewer</name>
    <message>
        <source>Linear</source>
        <translation>线性</translation>
    </message>
    <message>
        <source>Speed In / Speed Out</source>
        <translation>速进/速出</translation>
    </message>
    <message>
        <source>Ease In / Ease Out</source>
        <translation>缓入/缓出</translation>
    </message>
    <message>
        <source>Ease In / Ease Out %</source>
        <translation>缓入/缓出(%)</translation>
    </message>
    <message>
        <source>Exponential</source>
        <translation>指数运算</translation>
    </message>
    <message>
        <source>Expression</source>
        <translation>表达式</translation>
    </message>
    <message>
        <source>File</source>
        <translation>文件</translation>
    </message>
    <message>
        <source>Constant</source>
        <translation>恒定</translation>
    </message>
    <message>
        <source>Range:</source>
        <translation type="vanished">范围：</translation>
    </message>
    <message>
        <source>Interpolation:</source>
        <translation>插值：</translation>
    </message>
    <message>
        <source>Step:</source>
        <translation type="vanished">步：</translation>
    </message>
    <message>
        <source>Similar Shape</source>
        <translation>相似形状</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>应用</translation>
    </message>
    <message>
        <source>&lt; </source>
        <translation>&lt; </translation>
    </message>
    <message>
        <source> &gt;</source>
        <translation> &gt;</translation>
    </message>
    <message>
        <source>Speed</source>
        <translation>速度</translation>
    </message>
    <message>
        <source>Ease</source>
        <translation>缓动</translation>
    </message>
    <message>
        <source>Ease%</source>
        <translation>缓动%</translation>
    </message>
    <message>
        <source>Expo</source>
        <translation>指数</translation>
    </message>
    <message>
        <source>Expr</source>
        <translation>Expr</translation>
    </message>
    <message>
        <source>Const</source>
        <translation>恒定</translation>
    </message>
    <message>
        <source>Similar</source>
        <translation>相似</translation>
    </message>
    <message>
        <source>????</source>
        <translation>????</translation>
    </message>
</context>
<context>
    <name>FunctionSelection</name>
    <message>
        <source>There is a circular reference in the definition of the interpolation.</source>
        <translation>该插值定义中存在循环引用。</translation>
    </message>
</context>
<context>
    <name>FunctionSheetCellViewer</name>
    <message>
        <source>Delete Key</source>
        <translation>删除键</translation>
    </message>
    <message>
        <source>Set Key</source>
        <translation>设置键</translation>
    </message>
    <message>
        <source>Linear Interpolation</source>
        <translation>线性插值</translation>
    </message>
    <message>
        <source>Speed In / Speed Out Interpolation</source>
        <translation>速进/速出插值</translation>
    </message>
    <message>
        <source>Ease In / Ease Out Interpolation</source>
        <translation>缓入/缓出插值</translation>
    </message>
    <message>
        <source>Ease In / Ease Out (%) Interpolation</source>
        <translation>缓入/缓出（%）插值</translation>
    </message>
    <message>
        <source>Expression Interpolation</source>
        <translation>表达式插值</translation>
    </message>
    <message>
        <source>File Interpolation</source>
        <translation>文件插值</translation>
    </message>
    <message>
        <source>Constant Interpolation</source>
        <translation>恒定插值</translation>
    </message>
    <message>
        <source>Exponential Interpolation</source>
        <translation>指数运算插值</translation>
    </message>
    <message>
        <source>Step 1</source>
        <translation>第 1 步</translation>
    </message>
    <message>
        <source>Step 2</source>
        <translation>第 2 步</translation>
    </message>
    <message>
        <source>Step 3</source>
        <translation>第 3 步</translation>
    </message>
    <message>
        <source>Step 4</source>
        <translation>第 4 步</translation>
    </message>
</context>
<context>
    <name>FunctionToolbar</name>
    <message>
        <source>Value</source>
        <translation>值</translation>
    </message>
    <message>
        <source>&amp;Function Editor Toggle</source>
        <translation>动画编辑器(&amp;F)</translation>
    </message>
</context>
<context>
    <name>FunctionTreeView</name>
    <message>
        <source>Save Curve</source>
        <translation>保存曲线</translation>
    </message>
    <message>
        <source>Load Curve</source>
        <translation>加载曲线</translation>
    </message>
    <message>
        <source>Export Data</source>
        <translation>导出数据</translation>
    </message>
    <message>
        <source>Show Animated Only</source>
        <translation>只显示已有动画的</translation>
    </message>
    <message>
        <source>Show All</source>
        <translation>显示全部</translation>
    </message>
</context>
<context>
    <name>FxColumnPainter</name>
    <message>
        <source>&amp;Disconnect from Xsheet</source>
        <translation>断开摄影表联接(&amp;D)</translation>
    </message>
    <message>
        <source>&amp;Connect to Xsheet</source>
        <translation>联接摄影表(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Paste Add</source>
        <translation>粘贴添加(&amp;P)</translation>
    </message>
    <message>
        <source>&amp;Preview</source>
        <translation>预览(&amp;P)</translation>
    </message>
    <message>
        <source>&amp;Open Subxsheet</source>
        <translation>打开子摄影表(&amp;O)</translation>
    </message>
    <message>
        <source>&amp;Uncache Fx</source>
        <translation>取消特效缓存(&amp;U)</translation>
    </message>
    <message>
        <source>&amp;Cache FX</source>
        <translation>缓存特效(&amp;C)</translation>
    </message>
</context>
<context>
    <name>FxOutputPainter</name>
    <message>
        <source>&amp;Delete</source>
        <translation>删除(&amp;D)</translation>
    </message>
    <message>
        <source>&amp;Activate</source>
        <translation>激活(&amp;A)</translation>
    </message>
    <message>
        <source>Output</source>
        <translation type="vanished">输出</translation>
    </message>
    <message>
        <source>Out</source>
        <translation type="vanished">Out</translation>
    </message>
</context>
<context>
    <name>FxPainter</name>
    <message>
        <source>&amp;Open Group</source>
        <translation>打开组(&amp;O)</translation>
    </message>
    <message>
        <source>&amp;Paste Replace</source>
        <translation>粘贴替换(&amp;P)</translation>
    </message>
    <message>
        <source>&amp;Paste Add</source>
        <translation>粘贴添加(&amp;P)</translation>
    </message>
    <message>
        <source>&amp;Delete</source>
        <translation>删除(&amp;D)</translation>
    </message>
    <message>
        <source>&amp;Disconnect from Xsheet</source>
        <translation>断开摄影表联接(&amp;D)</translation>
    </message>
    <message>
        <source>&amp;Connect to Xsheet</source>
        <translation>联接摄影表(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Create Linked FX</source>
        <translation>创建链接特效(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Unlink</source>
        <translation>不链接(&amp;U)</translation>
    </message>
    <message>
        <source>&amp;Make Macro FX</source>
        <translation>制作宏特效(&amp;M)</translation>
    </message>
    <message>
        <source>&amp;Explode Macro FX</source>
        <translation>展开宏特效(&amp;E)</translation>
    </message>
    <message>
        <source>&amp;Open Macro FX</source>
        <translation>打开宏特效(&amp;O)</translation>
    </message>
    <message>
        <source>&amp;Save As Preset...</source>
        <translation>另存预设(&amp;S)...</translation>
    </message>
    <message>
        <source>&amp;Preview</source>
        <translation>预览(&amp;P)</translation>
    </message>
    <message>
        <source>&amp;Uncache FX</source>
        <translation>取消特效缓存(&amp;U)</translation>
    </message>
    <message>
        <source>&amp;Cache FX</source>
        <translation>缓存特效(&amp;C)</translation>
    </message>
</context>
<context>
    <name>FxPalettePainter</name>
    <message>
        <source>&amp;Disconnect from Xsheet</source>
        <translation>解除摄影表联接(&amp;D)</translation>
    </message>
    <message>
        <source>&amp;Connect to Xsheet</source>
        <translation>联接摄影表(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Preview</source>
        <translation>预览(&amp;P)</translation>
    </message>
</context>
<context>
    <name>FxSchematicLink</name>
    <message>
        <source>&amp;Delete</source>
        <translation>删除(&amp;D)</translation>
    </message>
    <message>
        <source>&amp;Paste Insert</source>
        <translation>粘贴插入(&amp;P)</translation>
    </message>
</context>
<context>
    <name>FxSchematicPort</name>
    <message>
        <source>&amp;Disconnect from Xsheet</source>
        <translation>断开摄影表联接(&amp;D)</translation>
    </message>
    <message>
        <source>&amp;Connect to Xsheet</source>
        <translation>联接摄影表(&amp;C)</translation>
    </message>
</context>
<context>
    <name>FxSchematicScene</name>
    <message>
        <source>Cannot Paste Insert a selection of unconnected FX nodes.
Select FX nodes and related links before copying or cutting the selection you want to paste.</source>
        <translation>不能“粘贴插入”多个没联接的特效节点。
拷贝或剪切之前一起选上特效节点和它们的联接。</translation>
    </message>
    <message>
        <source>Cannot Paste Add a selection of unconnected FX nodes.
Select FX nodes and related links before copying or cutting the selection you want to paste.</source>
        <translation>不能“粘贴添加”多个没联接的特效节点。
拷贝或剪切之前一起选上特效节点和它们的联接。</translation>
    </message>
    <message>
        <source>Cannot Paste Replace a selection of unconnected FX nodes.
Select FX nodes and related links before copying or cutting the selection you want to paste.</source>
        <translation>不能“粘贴替换”多个没联接的特效节点。
拷贝或剪切之前一起选上特效节点和它们的联接。</translation>
    </message>
</context>
<context>
    <name>FxSettings</name>
    <message>
        <source>&amp;Camera Preview</source>
        <translation>相机预览(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Preview</source>
        <translation>预览(&amp;P)</translation>
    </message>
    <message>
        <source>&amp;White Background</source>
        <translation>白背景(&amp;W)</translation>
    </message>
    <message>
        <source>&amp;Black Background</source>
        <translation>黑背景(&amp;B)</translation>
    </message>
    <message>
        <source>&amp;Checkered Background</source>
        <translation>棋盘格背景(&amp;C)</translation>
    </message>
    <message>
        <source> : </source>
        <translation> : </translation>
    </message>
</context>
<context>
    <name>FxXSheetPainter</name>
    <message>
        <source>&amp;Paste Add</source>
        <translation>粘贴添加(&amp;P)</translation>
    </message>
    <message>
        <source>&amp;Preview</source>
        <translation>预览(&amp;P)</translation>
    </message>
    <message>
        <source>XSheet</source>
        <translation type="vanished">摄影表</translation>
    </message>
    <message>
        <source>X</source>
        <translation type="vanished">X</translation>
    </message>
</context>
<context>
    <name>GroupPainter</name>
    <message>
        <source>&amp;Open Group</source>
        <translation>打开组(&amp;O)</translation>
    </message>
</context>
<context>
    <name>Histogram</name>
    <message>
        <source>Logarithmic Scale</source>
        <translation>对数标度</translation>
    </message>
</context>
<context>
    <name>InfoViewer</name>
    <message>
        <source>File Info</source>
        <translation>文件信息</translation>
    </message>
</context>
<context>
    <name>KeyframeNavigator</name>
    <message>
        <source>Previous Key</source>
        <translation>上一个键</translation>
    </message>
    <message>
        <source>Set Key</source>
        <translation>设置键</translation>
    </message>
    <message>
        <source>Next Key</source>
        <translation>下一个键</translation>
    </message>
</context>
<context>
    <name>LineEdit</name>
    <message>
        <source>A file name cannot contains any of the following chracters: /\:*?&quot;&lt;&gt;|.</source>
        <translation type="vanished">文件名不能包含如下的任一字符：/\:*?&quot;&lt;&gt;|.</translation>
    </message>
</context>
<context>
    <name>PageViewer</name>
    <message>
        <source>Toggle Link to Studio Palette</source>
        <translation type="vanished">开关链接到工作室调色板</translation>
    </message>
    <message>
        <source>Remove Reference to Studio Palette</source>
        <translation type="vanished">移除工作室调色板引用</translation>
    </message>
    <message>
        <source>New Style</source>
        <translation type="vanished">新建样式</translation>
    </message>
    <message>
        <source>New Page</source>
        <translation type="vanished">新建页</translation>
    </message>
</context>
<context>
    <name>PaletteViewer</name>
    <message>
        <source>&amp;Save Palette As</source>
        <translation>另存调色板(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Save Palette</source>
        <translation>保存调色板(&amp;S)</translation>
    </message>
    <message>
        <source>Options</source>
        <translation>选项</translation>
    </message>
    <message>
        <source>&amp;Small Thumbnails View</source>
        <translation>小号缩略图视图(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Large Thumbnails View</source>
        <translation>大号缩略图视图(&amp;L)</translation>
    </message>
    <message>
        <source>&amp;List View</source>
        <translation>列表视图(&amp;L)</translation>
    </message>
    <message>
        <source>&amp;New Page</source>
        <translation>新建页(&amp;N)</translation>
    </message>
    <message>
        <source>&amp;New Style</source>
        <translation>新建样式(&amp;N)</translation>
    </message>
    <message>
        <source>&amp;Move Palette</source>
        <translation>移动调色板(&amp;M)</translation>
    </message>
    <message>
        <source>Color Model: </source>
        <translation type="vanished">颜色模型：</translation>
    </message>
    <message>
        <source>&amp;Palette Gizmo</source>
        <translation>调色板装置</translation>
    </message>
    <message>
        <source>New Page</source>
        <translation>新建页</translation>
    </message>
    <message>
        <source>Delete Page</source>
        <translation>删除页</translation>
    </message>
    <message>
        <source>Palette</source>
        <translation>调色板</translation>
    </message>
    <message>
        <source>Level Palette: </source>
        <translation>层级调色板：</translation>
    </message>
    <message>
        <source>Cleanup Palette</source>
        <translation>清理调色板</translation>
    </message>
    <message>
        <source>Studio Palette</source>
        <translation>工作室调色板</translation>
    </message>
    <message>
        <source>&amp;Small Thumbnails With Name View</source>
        <translation type="vanished">带名字的小号缩略图视图</translation>
    </message>
    <message>
        <source>Lock Palette</source>
        <translation>锁定调色板</translation>
    </message>
    <message>
        <source>&amp;Lock Palette</source>
        <translation>锁定调色板(&amp;L)</translation>
    </message>
    <message>
        <source>&amp;Medium Thumbnails View</source>
        <translation>中号缩略图视图(&amp;M)</translation>
    </message>
    <message>
        <source>Style Name</source>
        <translation>样式名</translation>
    </message>
    <message>
        <source>StudioPalette Name</source>
        <translation>工作室调色板名</translation>
    </message>
    <message>
        <source>Both Names</source>
        <translation>两种名字</translation>
    </message>
    <message>
        <source>Overwrite</source>
        <translation>覆盖</translation>
    </message>
    <message>
        <source>Don&apos;t Overwrite</source>
        <translation>不覆盖</translation>
    </message>
    <message>
        <source>Update</source>
        <translation>更新</translation>
    </message>
    <message>
        <source>Don&apos;t Update</source>
        <translation>不更新</translation>
    </message>
    <message>
        <source>     (Color Model: </source>
        <translation>     (颜色模型：</translation>
    </message>
    <message>
        <source>)</source>
        <translation>)</translation>
    </message>
</context>
<context>
    <name>PaletteViewerGUI::PageViewer</name>
    <message>
        <source>- No Styles -</source>
        <translation>- 无样式 -</translation>
    </message>
    <message>
        <source>Remove Links</source>
        <translation>移除链接</translation>
    </message>
    <message>
        <source>New Style</source>
        <translation>新建样式</translation>
    </message>
    <message>
        <source>New Page</source>
        <translation>新建页</translation>
    </message>
</context>
<context>
    <name>PalettesScanPopup</name>
    <message>
        <source>Search for Palettes</source>
        <translation>搜索调色板</translation>
    </message>
    <message>
        <source>Ok</source>
        <translation>好</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>&lt;files&gt;</source>
        <translation>&lt;文件&gt;</translation>
    </message>
</context>
<context>
    <name>ParamViewer</name>
    <message>
        <source>Swatch Viewer</source>
        <translation>样本查看器</translation>
    </message>
</context>
<context>
    <name>ParamsPageSet</name>
    <message>
        <source>Fx Help</source>
        <translation>特效帮助</translation>
    </message>
</context>
<context>
    <name>PegbarPainter</name>
    <message>
        <source>&amp;Reset Center</source>
        <translation>重置中心点(&amp;R)</translation>
    </message>
</context>
<context>
    <name>PointParamField</name>
    <message>
        <source>Y:</source>
        <translation>Y：</translation>
    </message>
    <message>
        <source>X:</source>
        <translation>X:</translation>
    </message>
</context>
<context>
    <name>ProgressDialog</name>
    <message>
        <source>Toonz</source>
        <translation type="vanished">TOONZ</translation>
    </message>
</context>
<context>
    <name>QObject</name>
    <message>
        <source>Information</source>
        <translation>信息</translation>
    </message>
    <message>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <source>Critical</source>
        <translation>严重警告</translation>
    </message>
    <message>
        <source>Question</source>
        <translation>问题</translation>
    </message>
    <message>
        <source>Styles you are going to delete are used to paint lines and areas in the animation level.
</source>
        <translation>您要删除的样式已经用于动画层级的线和区域。</translation>
    </message>
    <message>
        <source>How do you want to proceed?</source>
        <translation>要怎么处理？</translation>
    </message>
    <message>
        <source>Delete Styles Only</source>
        <translation>仅删除样式</translation>
    </message>
    <message>
        <source>Delete Styles, Lines and Areas</source>
        <translation>删除样式，线和区域</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Cannot premultiply the selected file.</source>
        <translation>未能预合成所选文件。</translation>
    </message>
    <message>
        <source>Cannot premultiply a vector-based level.</source>
        <translation>未能预合成矢量层级。</translation>
    </message>
    <message>
        <source>Level %1 premultiplied.</source>
        <translation>层级 %1 完成预合成。</translation>
    </message>
    <message>
        <source>Frame %1 : conversion failed!</source>
        <translation>帧 %1 ：转换失败！</translation>
    </message>
    <message>
        <source>Save</source>
        <translation>保存</translation>
    </message>
    <message>
        <source>Discard</source>
        <translation>放弃更改</translation>
    </message>
    <message>
        <source>Yes</source>
        <translation>是</translation>
    </message>
    <message>
        <source>No</source>
        <translation>否</translation>
    </message>
    <message>
        <source>Stage Schematic</source>
        <translation>舞台简图</translation>
    </message>
    <message>
        <source>FX Schematic</source>
        <translation>特效简图</translation>
    </message>
    <message>
        <source>Fx Schematic</source>
        <translation type="vanished">特效简图</translation>
    </message>
    <message>
        <source>Save Motion Path</source>
        <translation>保存运动路径</translation>
    </message>
    <message>
        <source>Motion Path files (*.mpath)</source>
        <translation>运动路径(*.mpath)</translation>
    </message>
    <message>
        <source>Load Motion Path</source>
        <translation>加载运动路径</translation>
    </message>
    <message>
        <source>Can&apos;t paste styles there</source>
        <translation>此处不能粘贴样式</translation>
    </message>
    <message>
        <source>Can&apos;t modify color #0</source>
        <translation>颜色#0不可修改</translation>
    </message>
    <message>
        <source>There are more cut/copied styles than selected. Paste anyway (adding styles)?</source>
        <translation>剪切/拷贝的比选上的包含了更多的样式。还要粘贴（添加样式）吗？</translation>
    </message>
    <message>
        <source>Paste</source>
        <translation>粘贴</translation>
    </message>
    <message>
        <source>Palette</source>
        <translation>调色板</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>应用</translation>
    </message>
    <message>
        <source>This feature is not available in the demo version.
For more information visit the %1 site:</source>
        <translation type="vanished">功能在此演示版中不可用。要了解更多信息访问 %1 网站：</translation>
    </message>
    <message>
        <source>To request a trial license please contact </source>
        <translation type="vanished">请求使用许可证请联系</translation>
    </message>
    <message>
        <source>For further information visit </source>
        <translation type="vanished">更多信息访问</translation>
    </message>
    <message>
        <source>Fullpath:     </source>
        <translation>完整路径：</translation>
    </message>
    <message>
        <source>File Type:    </source>
        <translation>文件类型：  </translation>
    </message>
    <message>
        <source>Frames:       </source>
        <translation>帧：</translation>
    </message>
    <message>
        <source>Owner:        </source>
        <translation>所有者：</translation>
    </message>
    <message>
        <source>Size:         </source>
        <translation>大小：</translation>
    </message>
    <message>
        <source>Created:      </source>
        <translation>创建于：</translation>
    </message>
    <message>
        <source>Modified:     </source>
        <translation>修改于：</translation>
    </message>
    <message>
        <source>Last Access:  </source>
        <translation>最近访问于：</translation>
    </message>
    <message>
        <source>Image Size:   </source>
        <translation>图像大小：</translation>
    </message>
    <message>
        <source>SaveBox:      </source>
        <translation>保存框：</translation>
    </message>
    <message>
        <source>Bits/Sample:  </source>
        <translation>位率/样本：</translation>
    </message>
    <message>
        <source>Sample/Pixel: </source>
        <translation>样本/像素：</translation>
    </message>
    <message>
        <source>Dpi:          </source>
        <translation>DPI：</translation>
    </message>
    <message>
        <source>Orientation:  </source>
        <translation>方向：</translation>
    </message>
    <message>
        <source>Compression:  </source>
        <translation>压缩：</translation>
    </message>
    <message>
        <source>Quality:      </source>
        <translation>画质：</translation>
    </message>
    <message>
        <source>Smoothing:    </source>
        <translation>平滑：</translation>
    </message>
    <message>
        <source>Codec:        </source>
        <translation>编码器：</translation>
    </message>
    <message>
        <source>Alpha Channel:</source>
        <translation>透明通道：</translation>
    </message>
    <message>
        <source>Byte Ordering:</source>
        <translation></translation>
    </message>
    <message>
        <source>H Pos:</source>
        <translation>水平位置：</translation>
    </message>
    <message>
        <source>Palette Pages:</source>
        <translation>调色板页：</translation>
    </message>
    <message>
        <source>Palette Styles:</source>
        <translation>调色板样式：</translation>
    </message>
    <message>
        <source>Camera Size:      </source>
        <translation>相机大小：</translation>
    </message>
    <message>
        <source>Camera Dpi:       </source>
        <translation>相机DPI:</translation>
    </message>
    <message>
        <source>Number of Frames: </source>
        <translation>帧数：</translation>
    </message>
    <message>
        <source>Number of Levels: </source>
        <translation>层级数：</translation>
    </message>
    <message>
        <source>Output Path:      </source>
        <translation>输出路径：</translation>
    </message>
    <message>
        <source>Endianess:      </source>
        <translation>字节顺序：</translation>
    </message>
    <message>
        <source>It is not possible to delete the style #</source>
        <translation>未能删除样式#</translation>
    </message>
    <message>
        <source>It is not possible to delete styles #0 and #1.</source>
        <translation>未能删除样式 #0 和 #1。</translation>
    </message>
    <message>
        <source>It is not possible to find the %1 level.</source>
        <translation>未能找到层级 %1。</translation>
    </message>
    <message>
        <source>There was an error copying %1</source>
        <translation>拷贝 %1时发生了错误</translation>
    </message>
    <message>
        <source>It is not possible to find the level %1</source>
        <translation>未能找到层级 %1</translation>
    </message>
    <message>
        <source>Length:       </source>
        <translation>长度：</translation>
    </message>
    <message>
        <source>Channels: </source>
        <translation>通道：</translation>
    </message>
    <message>
        <source>Sample Rate: </source>
        <translation>采样率：</translation>
    </message>
    <message>
        <source>Sample Size:      </source>
        <translation>采样大小：</translation>
    </message>
    <message>
        <source>The file %1 does not exist.</source>
        <translation>文件 %1 不存在。</translation>
    </message>
    <message>
        <source>It is not possible to assing a shortcut with modifiers to the visualization commands.</source>
        <translation>不能分配带修饰键的快捷键给视觉化命令。</translation>
    </message>
    <message>
        <source>It is not possible to save the motion path.</source>
        <translation>未能保存运动路径。</translation>
    </message>
    <message>
        <source>It is not possible to load the motion path.</source>
        <translation>未能加载运动路径。</translation>
    </message>
    <message>
        <source>&lt;custom&gt;</source>
        <translation>&lt;自定义&gt;</translation>
    </message>
    <message>
        <source>Toonz 7.1</source>
        <translation type="vanished">OpenToonz</translation>
    </message>
    <message>
        <source>The file name cannot be empty or contain any of the following characters: (new line) \ / : * ? &quot; |</source>
        <translation>文件名不能为空或者包含如下任一字符：
\ / : * ? &quot; |</translation>
    </message>
    <message>
        <source>The source image seems not suitable for this kind of conversion</source>
        <translation>源图像似乎不适合此类转换</translation>
    </message>
    <message>
        <source>Deleting &quot;%1&quot;.
Are you sure?</source>
        <translation>要删除 &quot;%1&quot;。
确定吗？</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation>删除</translation>
    </message>
    <message>
        <source>Paste Style  in Palette : %1</source>
        <translation>粘贴样式到调色板：%1</translation>
    </message>
    <message>
        <source>Delete Style  from Palette : %1</source>
        <translation>从调色板：%1 删除样式</translation>
    </message>
    <message>
        <source>Cut Style  from Palette : %1</source>
        <translation>从调色板：%1 剪切样式</translation>
    </message>
    <message>
        <source>  to Palette : %1</source>
        <translation>到调色板：%1</translation>
    </message>
    <message>
        <source>Paste Color &amp;&amp; Name%1</source>
        <translation>粘贴颜色和名字%1</translation>
    </message>
    <message>
        <source>Paste Name%1</source>
        <translation>粘贴名字%1</translation>
    </message>
    <message>
        <source>Paste Color%1</source>
        <translation>粘贴颜色 %1</translation>
    </message>
    <message>
        <source>Paste%1</source>
        <translation>粘贴 %1</translation>
    </message>
    <message>
        <source>Blend Colors  in Palette : %1</source>
        <translation>在调色板 %1 中混合颜色</translation>
    </message>
    <message>
        <source>Toggle Link  in Palette : %1</source>
        <translation>在调色板 %1 开关链接</translation>
    </message>
    <message>
        <source>Remove Link  in Palette : %1</source>
        <translation>移除调色板 %1 的链接</translation>
    </message>
    <message>
        <source>Get Color from Studio Palette</source>
        <translation>从工作室调色板获取样式</translation>
    </message>
    <message>
        <source>Paste Object  </source>
        <translation>粘贴物体</translation>
    </message>
    <message>
        <source>Copy Keyframe</source>
        <translation>拷贝关键帧</translation>
    </message>
    <message>
        <source>Paste Keyframe  at Frame : %1</source>
        <translation>在帧 %1 粘贴关键帧</translation>
    </message>
    <message>
        <source>Delete Keyframe</source>
        <translation>删除关键帧</translation>
    </message>
    <message>
        <source>Move Keyframe</source>
        <translation>移动关键帧</translation>
    </message>
    <message>
        <source>Change Style   Palette : %1  Style#%2  [R%3 G%4 B%5] -&gt; [R%6 G%7 B%8]</source>
        <translation>改变样式   调色板：%1 スタイル#%2  [R%3 G%4 B%5] -&gt; [R%6 G%7 B%8]</translation>
    </message>
    <message>
        <source>Replace</source>
        <translation>替换</translation>
    </message>
    <message>
        <source>Modify Fx Param : %1</source>
        <translation>修改特效参数：%1</translation>
    </message>
    <message>
        <source>Modify Fx Param : %1 : %2 -&gt; %3</source>
        <translation>修改特效参数：%1 : %2 -&gt; %3</translation>
    </message>
    <message>
        <source>Modify Fx Param : </source>
        <translation>修改特效参数：</translation>
    </message>
    <message>
        <source>ON : %1</source>
        <translation>开：%1</translation>
    </message>
    <message>
        <source>OFF : %1</source>
        <translation>关：%1</translation>
    </message>
    <message>
        <source>Modify Fx Param : %1 : %2 Key</source>
        <translation>修改特效参数：%1 : %2 键</translation>
    </message>
    <message>
        <source>Add</source>
        <translation>添加</translation>
    </message>
    <message>
        <source>Remove</source>
        <translation>删除</translation>
    </message>
    <message>
        <source>Modify Fx Param : %1 : %2 Point</source>
        <translation>修改特效参数：%1 : %2 点</translation>
    </message>
    <message>
        <source>%1 : Linear ON</source>
        <translation>%1 : 线性开</translation>
    </message>
    <message>
        <source>%1 : Linear OFF</source>
        <translation>%1 : 线性关</translation>
    </message>
    <message>
        <source>Overwrite</source>
        <translation>覆盖</translation>
    </message>
    <message>
        <source>Don&apos;t Overwrite</source>
        <translation>不覆盖</translation>
    </message>
    <message>
        <source>Ok</source>
        <translation>好</translation>
    </message>
    <message>
        <source>Deletion of Lines and Areas from raster-based levels is not undoable.
Are you sure?</source>
        <translation>从光栅为基础的层级定义线和区域是不可行的。
确定吗？</translation>
    </message>
    <message>
        <source>Modify Fx Param : %1 Key : %2  Frame %3</source>
        <translation>修改特效参数：%1 键 : %2  帧 %3</translation>
    </message>
    <message>
        <source>Set</source>
        <translation>设定</translation>
    </message>
    <message>
        <source>OpenToonz 1.0</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QPushButton</name>
    <message>
        <source>OK</source>
        <translation>好</translation>
    </message>
</context>
<context>
    <name>RadioButtonDialog</name>
    <message>
        <source>Toonz</source>
        <translation type="vanished">TOONZ</translation>
    </message>
</context>
<context>
    <name>SchematicViewer</name>
    <message>
        <source>&amp;Fit to Window</source>
        <translation>适合到窗口(&amp;F)</translation>
    </message>
    <message>
        <source>&amp;Focus on Current</source>
        <translation>定焦到当前中心(&amp;F)</translation>
    </message>
    <message>
        <source>&amp;Reorder Nodes</source>
        <translation>重新排列节点(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Reset Size</source>
        <translation>重置大小(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Minimize Nodes</source>
        <translation>最小化节点(&amp;M)</translation>
    </message>
    <message>
        <source>&amp;Maximize Nodes</source>
        <translation>最大化节点(&amp;M)</translation>
    </message>
    <message>
        <source>&amp;New Pegbar</source>
        <translation>新建定位尺(&amp;N)</translation>
    </message>
    <message>
        <source>&amp;New Camera</source>
        <translation>新建相机(&amp;N)</translation>
    </message>
    <message>
        <source>&amp;New Motion Path</source>
        <translation>新建运动路径(&amp;N)</translation>
    </message>
    <message>
        <source>&amp;Schematic Toggle</source>
        <translation type="vanished">开关简图(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Swtich output port display mode</source>
        <translation type="unfinished">切换输出端口显示模式(&amp;S)</translation>
    </message>
</context>
<context>
    <name>SchematicWindowEditor</name>
    <message>
        <source>&amp;Close Editor</source>
        <translation>关闭编辑器(&amp;C)</translation>
    </message>
</context>
<context>
    <name>SimilarShapeSegmentPage</name>
    <message>
        <source>Reference Curve:</source>
        <translation>参考曲线：</translation>
    </message>
    <message>
        <source>Frame Offset:</source>
        <translation>帧偏移：</translation>
    </message>
    <message>
        <source>There is a syntax error in the definition of the interpolation.</source>
        <translation>插值定义中有个语法错误。</translation>
    </message>
    <message>
        <source>There is a circular reference in the definition of the interpolation.</source>
        <translation>插值定义中有个循环引用。</translation>
    </message>
</context>
<context>
    <name>SpecialStyleChooserPage</name>
    <message>
        <source>Plain color</source>
        <translation>纯色</translation>
    </message>
</context>
<context>
    <name>SpeedInOutSegmentPage</name>
    <message>
        <source>Speed in:</source>
        <translation type="vanished">变速进：</translation>
    </message>
    <message>
        <source>Speed out:</source>
        <translation type="vanished">变速出：</translation>
    </message>
    <message>
        <source>First Speed:</source>
        <translation>起点速度：</translation>
    </message>
    <message>
        <source>Handle:</source>
        <translation>控制：</translation>
    </message>
    <message>
        <source>/</source>
        <translation>/</translation>
    </message>
    <message>
        <source>Last Speed:</source>
        <translation>终点速度：</translation>
    </message>
    <message>
        <source>---</source>
        <translation>---</translation>
    </message>
</context>
<context>
    <name>SplinePainter</name>
    <message>
        <source>&amp;Delete</source>
        <translation>删除(&amp;D)</translation>
    </message>
    <message>
        <source>&amp;Save Motion Path...</source>
        <translation>保存运动路径(&amp;S)...</translation>
    </message>
    <message>
        <source>&amp;Load Motion Path...</source>
        <translation>加载运动路径(&amp;L)...</translation>
    </message>
</context>
<context>
    <name>StageSchematicScene</name>
    <message>
        <source>&amp;New Pegbar</source>
        <translation>新建定位尺(&amp;N)</translation>
    </message>
    <message>
        <source>&amp;New Motion Path</source>
        <translation>新建运动路径(&amp;N)</translation>
    </message>
    <message>
        <source>&amp;New Camera</source>
        <translation>新建相机(&amp;N)</translation>
    </message>
</context>
<context>
    <name>StudioPaletteTreeViewer</name>
    <message>
        <source>This folder is not empty. Delete anyway?</source>
        <translation>此文件夹不是空的。一定要删除吗？</translation>
    </message>
    <message>
        <source>New Palette</source>
        <translation>新建调色板</translation>
    </message>
    <message>
        <source>New Folder</source>
        <translation>新建文件夹</translation>
    </message>
    <message>
        <source>Delete Folder</source>
        <translation>删除文件夹</translation>
    </message>
    <message>
        <source>Load into Current Palette</source>
        <translation>加载到当前调色板</translation>
    </message>
    <message>
        <source>Merge to Current Palette</source>
        <translation>合并到当前调色板</translation>
    </message>
    <message>
        <source>Replace with Current Palette</source>
        <translation>用当前调色板替换</translation>
    </message>
    <message>
        <source>Delete Palette</source>
        <translation>删除调色板</translation>
    </message>
    <message>
        <source>Search for Palettes</source>
        <translation>搜索调色板</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation>删除</translation>
    </message>
    <message>
        <source>Adjust Current Level to This Palette</source>
        <translation>调整当前层级到此调色板</translation>
    </message>
    <message>
        <source>Convert to Studio Palette and Overwrite</source>
        <translation>转换工作站调色板并覆盖</translation>
    </message>
</context>
<context>
    <name>StudioPaletteViewer</name>
    <message>
        <source>&amp;New Folder</source>
        <translation type="vanished">新建文件夹</translation>
    </message>
    <message>
        <source>&amp;New Palette</source>
        <translation type="vanished">新建调色板</translation>
    </message>
    <message>
        <source>&amp;Search for Palettes</source>
        <translation type="vanished">搜索调色板(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Delete</source>
        <translation type="vanished">删除(&amp;D)</translation>
    </message>
</context>
<context>
    <name>StyleEditor</name>
    <message>
        <source>Apply</source>
        <translation>应用</translation>
    </message>
    <message>
        <source>Apply changes to current style</source>
        <translation>应用更改到当前样式</translation>
    </message>
    <message>
        <source>Auto</source>
        <translation type="vanished">自动</translation>
    </message>
    <message>
        <source>Automatically update style changes</source>
        <translation>自动更新样式</translation>
    </message>
    <message>
        <source>Return To Previous Style</source>
        <translation>返回前一样式</translation>
    </message>
    <message>
        <source>Current Style</source>
        <translation>当前样式</translation>
    </message>
    <message>
        <source>Plain</source>
        <translation>纯色</translation>
    </message>
    <message>
        <source>Texture</source>
        <translation>纹理</translation>
    </message>
    <message>
        <source>Special</source>
        <translation>特殊</translation>
    </message>
    <message>
        <source>Custom</source>
        <translation>自定义</translation>
    </message>
    <message>
        <source>Vector Brush</source>
        <translation>矢量笔刷</translation>
    </message>
    <message>
        <source>Settings</source>
        <translation>设定</translation>
    </message>
    <message>
        <source>Auto  
Apply</source>
        <translation>自动应用</translation>
    </message>
</context>
<context>
    <name>StyleEditorGUI::PlainColorPage</name>
    <message>
        <source>Wheel</source>
        <translation>色轮</translation>
    </message>
    <message>
        <source>HSV</source>
        <translation>HSV</translation>
    </message>
    <message>
        <source>Matte</source>
        <translation>不透明度</translation>
    </message>
    <message>
        <source>RGB</source>
        <translation>RGB</translation>
    </message>
</context>
<context>
    <name>StyleEditorGUI::SettingsPage</name>
    <message>
        <source>Autopaint for Lines</source>
        <translation>线自动上色</translation>
    </message>
</context>
<context>
    <name>StyleNameEditor</name>
    <message>
        <source>Name Editor</source>
        <translation>名字编辑器</translation>
    </message>
    <message>
        <source>OK</source>
        <translation>好</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>应用</translation>
    </message>
    <message>
        <source>Style Name</source>
        <translation>样式名</translation>
    </message>
    <message>
        <source>Name Editor: # %1</source>
        <translation>名字编辑器：# %1</translation>
    </message>
</context>
<context>
    <name>TMessageViewer</name>
    <message>
        <source>Errors</source>
        <translation>错误</translation>
    </message>
    <message>
        <source>Warnings</source>
        <translation>警告</translation>
    </message>
    <message>
        <source>Infos</source>
        <translation>信息</translation>
    </message>
    <message>
        <source> Clear </source>
        <translation> 清除 </translation>
    </message>
</context>
<context>
    <name>TablePainter</name>
    <message>
        <source>&amp;Reset Center</source>
        <translation>重置中心点(&amp;R)</translation>
    </message>
</context>
<context>
    <name>ToneCurveField</name>
    <message>
        <source>Channel:</source>
        <translation type="vanished">通道：</translation>
    </message>
</context>
<context>
    <name>VectorBrushStyleChooserPage</name>
    <message>
        <source>Plain color</source>
        <translation>纯色</translation>
    </message>
</context>
</TS>