#include "tools/tooloptions.h"
// TnzTools includes
#include "tools/tool.h"
#include "tools/toolhandle.h"
#include "tools/toolcommandids.h"
#include "selectiontool.h"
#include "vectorselectiontool.h"
#include "rasterselectiontool.h"
#include "brushtool.h"
#include "fullcolorbrushtool.h"
#include "tooloptionscontrols.h"
//#include "rgbpickertool.h"
#include "rulertool.h"
// TnzQt includes
#include "toonzqt/dvdialog.h"
#include "toonzqt/menubarcommand.h"
#include "toonzqt/gutil.h"
#include "toonzqt/dvscrollwidget.h"
// iwsw commented out temporarily
//#include "toonzqt/ghibli_3dlut_converter.h"
// TnzLib includes
#include "toonz/tobjecthandle.h"
#include "toonz/tstageobject.h"
#include "toonz/txsheethandle.h"
#include "toonz/tstageobjectspline.h"
#include "toonz/tframehandle.h"
#include "toonz/palettecontroller.h"
#include "toonz/txshlevelhandle.h"
#include "toonz/preferences.h"
#include "toonz/tstageobjecttree.h"
// TnzCore includes
#include "tproperty.h"
#include "tenv.h"
// Qt includes
#include <QPainter>
#include <QToolBar>
#include <QDockWidget>
#include <QHBoxLayout>
#include <QComboBox>
#include <QLabel>
#include <QPushButton>
#include <QToolButton>
#include <QResizeEvent>
#include <QList>
#include <QSignalMapper>
#include <QPushButton>
#include <QPropertyAnimation>
#include <QEasingCurve>
#include <QStackedWidget>
// tcg includes
#include "tcg/tcg_deleter_types.h"
TEnv::IntVar ArrowGlobalKeyFrame("EditToolGlobalKeyFrame", 0);
//=============================================================================
// ToolOptionToolBar
ToolOptionToolBar::ToolOptionToolBar(QWidget *parent) : QToolBar(parent) {
setObjectName("toolOptionsPanel");
setMaximumHeight(25);
}
//-----------------------------------------------------------------------------
void ToolOptionToolBar::addSpacing(int width) {
QWidget *spaceW = new QWidget(this);
spaceW->setFixedWidth(width);
addWidget(spaceW);
}
//=============================================================================
// ToolOptionsBox
ToolOptionsBox::ToolOptionsBox(QWidget *parent) : QFrame(parent) {
setObjectName("toolOptionsPanel");
setStyleSheet("#toolOptionsPanel {border: 0px; margin: 1px;}");
setFrameStyle(QFrame::StyledPanel);
setFixedHeight(26);
m_layout = new QHBoxLayout;
m_layout->setMargin(0);
m_layout->setSpacing(5);
m_layout->addSpacing(5);
setLayout(m_layout);
}
//-----------------------------------------------------------------------------
ToolOptionsBox::~ToolOptionsBox() {
std::for_each(m_controls.begin(), m_controls.end(),
tcg::deleter<ToolOptionControl>());
std::for_each(m_labels.begin(), m_labels.end(), tcg::deleter<QLabel>());
}
//-----------------------------------------------------------------------------
QLabel *ToolOptionsBox::addLabel(QString name) {
QLabel *label = new QLabel(name);
label->setFixedHeight(20);
m_layout->addWidget(label);
m_labels[name.toStdString()] = label;
return label;
}
//-----------------------------------------------------------------------------
void ToolOptionsBox::addLabel(std::string propName, QLabel *label) {
m_labels[propName] = label;
}
//-----------------------------------------------------------------------------
void ToolOptionsBox::addSeparator() {
DVGui::Separator *separator = new DVGui::Separator();
separator->setOrientation(false);
separator->setFixedWidth(17);
m_layout->addWidget(separator, 0);
}
//-----------------------------------------------------------------------------
void ToolOptionsBox::addControl(ToolOptionControl *control) {
m_controls[control->propertyName()] = control;
}
//-----------------------------------------------------------------------------
ToolOptionControl *ToolOptionsBox::control(
const std::string &controlName) const {
QMap<std::string, ToolOptionControl *>::const_iterator ct =
m_controls.find(controlName);
return (ct == m_controls.end()) ? 0 : ct.value();
}
//-----------------------------------------------------------------------------
void ToolOptionsBox::updateStatus() {
QMap<std::string, ToolOptionControl *>::iterator it;
for (it = m_controls.begin(); it != m_controls.end(); it++)
it.value()->updateStatus();
}
//=============================================================================
// ToolOptionControlBuilder
ToolOptionControlBuilder::ToolOptionControlBuilder(ToolOptionsBox *panel,
TTool *tool,
TPaletteHandle *pltHandle,
ToolHandle *toolHandle)
: m_panel(panel)
, m_tool(tool)
, m_pltHandle(pltHandle)
, m_toolHandle(toolHandle)
, m_singleValueWidgetType(SLIDER)
, m_enumWidgetType(COMBOBOX) {}
//-----------------------------------------------------------------------------
QLabel *ToolOptionControlBuilder::addLabel(TProperty *p) {
QLabel *label = new QLabel(p->getQStringName());
hLayout()->addWidget(label, 0);
return label;
}
//-----------------------------------------------------------------------------
void ToolOptionControlBuilder::visit(TDoubleProperty *p) {
QLabel *label = addLabel(p);
m_panel->addLabel(p->getName(), label);
ToolOptionSlider *control = new ToolOptionSlider(m_tool, p, m_toolHandle);
hLayout()->addWidget(control, 100);
// storing the control in the map for updating values later
m_panel->addControl(control);
CommandManager *cm = CommandManager::instance();
if (p->getName() == "Size:") {
QAction *a;
a = cm->getAction("A_IncreaseMaxBrushThickness");
control->addAction(a);
QObject::connect(a, SIGNAL(triggered()), control, SLOT(increase()));
a = cm->getAction("A_DecreaseMaxBrushThickness");
control->addAction(a);
QObject::connect(a, SIGNAL(triggered()), control, SLOT(decrease()));
}
if (p->getName() == "Hardness:") {
QAction *a;
a = cm->getAction("A_IncreaseBrushHardness");
control->addAction(a);
QObject::connect(a, SIGNAL(triggered()), control, SLOT(increase()));
a = cm->getAction("A_DecreaseBrushHardness");
control->addAction(a);
QObject::connect(a, SIGNAL(triggered()), control, SLOT(decrease()));
}
hLayout()->addSpacing(5);
}
//-----------------------------------------------------------------------------
void ToolOptionControlBuilder::visit(TDoublePairProperty *p) {
QLabel *label = addLabel(p);
m_panel->addLabel(p->getName(), label);
ToolOptionPairSlider *control = new ToolOptionPairSlider(
m_tool, p, QObject::tr("Min:"), QObject::tr("Max:"), m_toolHandle);
hLayout()->addWidget(control, 150);
m_panel->addControl(control);
if (p->getName() == "Size:" || p->getName() == "Size") {
CommandManager *cm = CommandManager::instance();
QAction *a;
a = cm->getAction("A_IncreaseMaxBrushThickness");
control->addAction(a);
QObject::connect(a, SIGNAL(triggered()), control, SLOT(increaseMaxValue()));
a = cm->getAction("A_DecreaseMaxBrushThickness");
control->addAction(a);
QObject::connect(a, SIGNAL(triggered()), control, SLOT(decreaseMaxValue()));
a = cm->getAction("A_IncreaseMinBrushThickness");
control->addAction(a);
QObject::connect(a, SIGNAL(triggered()), control, SLOT(increaseMinValue()));
a = cm->getAction("A_DecreaseMinBrushThickness");
control->addAction(a);
QObject::connect(a, SIGNAL(triggered()), control, SLOT(decreaseMinValue()));
}
hLayout()->addSpacing(5);
}
//-----------------------------------------------------------------------------
void ToolOptionControlBuilder::visit(TIntPairProperty *p) {
QLabel *label = addLabel(p);
m_panel->addLabel(p->getName(), label);
ToolOptionIntPairSlider *control = new ToolOptionIntPairSlider(
m_tool, p, QObject::tr("Min:"), QObject::tr("Max:"), m_toolHandle);
hLayout()->addWidget(control, 100);
m_panel->addControl(control);
if (p->getName() == "Size:") {
CommandManager *cm = CommandManager::instance();
QAction *a;
a = cm->getAction("A_IncreaseMaxBrushThickness");
control->addAction(a);
QObject::connect(a, SIGNAL(triggered()), control, SLOT(increaseMaxValue()));
a = cm->getAction("A_DecreaseMaxBrushThickness");
control->addAction(a);
QObject::connect(a, SIGNAL(triggered()), control, SLOT(decreaseMaxValue()));
a = cm->getAction("A_IncreaseMinBrushThickness");
control->addAction(a);
QObject::connect(a, SIGNAL(triggered()), control, SLOT(increaseMinValue()));
a = cm->getAction("A_DecreaseMinBrushThickness");
control->addAction(a);
QObject::connect(a, SIGNAL(triggered()), control, SLOT(decreaseMinValue()));
}
hLayout()->addSpacing(5);
}
//-----------------------------------------------------------------------------
void ToolOptionControlBuilder::visit(TIntProperty *p) {
QLabel *label = addLabel(p);
m_panel->addLabel(p->getName(), label);
ToolOptionIntSlider *control =
new ToolOptionIntSlider(m_tool, p, m_toolHandle);
if (m_singleValueWidgetType == FIELD) {
control->enableSlider(false);
control->setFixedWidth(45);
}
hLayout()->addWidget(control, 100);
m_panel->addControl(control);
if (p->getName() == "Size:") {
CommandManager *cm = CommandManager::instance();
QAction *a;
a = cm->getAction("A_IncreaseMaxBrushThickness");
control->addAction(a);
QObject::connect(a, SIGNAL(triggered()), control, SLOT(increase()));
a = cm->getAction("A_DecreaseMaxBrushThickness");
control->addAction(a);
QObject::connect(a, SIGNAL(triggered()), control, SLOT(decrease()));
}
hLayout()->addSpacing(5);
}
//-----------------------------------------------------------------------------
void ToolOptionControlBuilder::visit(TBoolProperty *p) {
ToolOptionCheckbox *control = new ToolOptionCheckbox(m_tool, p, m_toolHandle);
hLayout()->addWidget(control, 0);
m_panel->addControl(control);
if (p->getId() != "") {
std::string actionName = "A_ToolOption_" + p->getId();
QAction *a = CommandManager::instance()->getAction(actionName.c_str());
if (a) {
control->addAction(a);
QObject::connect(a, SIGNAL(triggered()), control, SLOT(doClick()));
}
}
hLayout()->addSpacing(5);
}
//-----------------------------------------------------------------------------
void ToolOptionControlBuilder::visit(TStringProperty *p) {
QLabel *label = addLabel(p);
m_panel->addLabel(p->getName(), label);
ToolOptionTextField *control = new ToolOptionTextField(m_tool, p);
m_panel->addControl(control);
hLayout()->addWidget(control);
hLayout()->addSpacing(5);
}
//-----------------------------------------------------------------------------
void ToolOptionControlBuilder::visit(TEnumProperty *p) {
QWidget *widget;
ToolOptionControl *control;
switch (m_enumWidgetType) {
case POPUPBUTTON: {
ToolOptionPopupButton *obj = new ToolOptionPopupButton(m_tool, p);
obj->setToolTip(p->getQStringName());
control = obj;
widget = obj;
break;
}
case COMBOBOX:
default: {
QLabel *label = addLabel(p);
m_panel->addLabel(p->getName(), label);
ToolOptionCombo *obj = new ToolOptionCombo(m_tool, p, m_toolHandle);
control = obj;
widget = obj;
break;
}
}
hLayout()->addWidget(widget, 100);
m_panel->addControl(control);
hLayout()->addSpacing(5);
if (p->getId() != "") {
std::string actionName = "A_ToolOption_" + p->getId();
QAction *a = CommandManager::instance()->getAction(actionName.c_str());
if (a) {
widget->addAction(a);
QObject::connect(a, SIGNAL(triggered()), widget, SLOT(doShowPopup()));
}
TEnumProperty::Range range = p->getRange();
TEnumProperty::Range::iterator it;
QSignalMapper *signalMapper = 0;
int index = 0;
for (it = range.begin(); it != range.end(); ++it, ++index) {
std::string item = ::to_string(*it);
std::string itemActionName = actionName + ":" + item;
a = CommandManager::instance()->getAction(itemActionName.c_str());
if (a) {
widget->addAction(a);
if (signalMapper == 0) {
signalMapper = new QSignalMapper(widget);
QObject::connect(signalMapper, SIGNAL(mapped(int)), widget,
SLOT(doOnActivated(int)));
}
QObject::connect(a, SIGNAL(triggered()), signalMapper, SLOT(map()));
signalMapper->setMapping(a, index);
}
}
}
}
//-----------------------------------------------------------------------------
void ToolOptionControlBuilder::visit(TStyleIndexProperty *p) {
QLabel *label = addLabel(p);
m_panel->addLabel(p->getName(), label);
StyleIndexFieldAndChip *chip =
new StyleIndexFieldAndChip(m_tool, p, m_pltHandle, m_toolHandle);
hLayout()->addWidget(chip, 0);
m_panel->addControl(chip);
}
//----------------------------------------------------------------------------------
void ToolOptionControlBuilder::visit(TPointerProperty *p) {
assert(!"not implemented");
}
//=============================================================================
// GenericToolOptionsBox
GenericToolOptionsBox::GenericToolOptionsBox(QWidget *parent, TTool *tool,
TPaletteHandle *pltHandle,
int propertyGroupIdx,
ToolHandle *toolHandle)
: ToolOptionsBox(parent) {
setObjectName("toolOptionsPanel");
ToolOptionControlBuilder builder(this, tool, pltHandle, toolHandle);
if (tool && tool->getProperties(propertyGroupIdx))
tool->getProperties(propertyGroupIdx)->accept(builder);
m_layout->addStretch(1);
}
//-----------------------------------------------------------------------------
ArrowToolOptionsBox::ArrowToolOptionsBox(
QWidget *parent, TTool *tool, TPropertyGroup *pg, TFrameHandle *frameHandle,
TObjectHandle *objHandle, TXsheetHandle *xshHandle, ToolHandle *toolHandle)
: ToolOptionsBox(parent)
, m_pg(pg)
, m_splined(false)
, m_tool(tool)
, m_frameHandle(frameHandle)
, m_objHandle(objHandle)
, m_xshHandle(xshHandle) {
setFrameStyle(QFrame::StyledPanel);
setObjectName("toolOptionsPanel");
setFixedHeight(26);
m_mainStackedWidget = new QStackedWidget(this);
/* --- General Parts --- */
// enable to choose target pegbar with combobox
m_currentStageObjectCombo = new QComboBox(this);
TEnumProperty *activeAxisProp =
dynamic_cast<TEnumProperty *>(m_pg->getProperty("Active Axis"));
if (activeAxisProp)
m_chooseActiveAxisCombo =
new ToolOptionCombo(m_tool, activeAxisProp, toolHandle);
TEnumProperty *autoSelectProp =
dynamic_cast<TEnumProperty *>(m_pg->getProperty("Auto Select Column"));
if (autoSelectProp)
m_pickCombo = new ToolOptionCombo(m_tool, autoSelectProp, toolHandle);
/* --- Position --- */
m_motionPathPosField =
new PegbarChannelField(m_tool, TStageObject::T_Path, "field", frameHandle,
objHandle, xshHandle, this);
m_ewPosField =
new PegbarChannelField(m_tool, TStageObject::T_X, "field", frameHandle,
objHandle, xshHandle, this);
m_nsPosField =
new PegbarChannelField(m_tool, TStageObject::T_Y, "field", frameHandle,
objHandle, xshHandle, this);
m_zField = new PegbarChannelField(m_tool, TStageObject::T_Z, "field",
frameHandle, objHandle, xshHandle, this);
m_noScaleZField = new NoScaleField(m_tool, "field");
m_ewPosLabel = new QLabel(tr("E/W:"), this);
m_nsPosLabel = new QLabel(tr("N/S:"), this);
// Lock E/W
TBoolProperty *lockProp =
dynamic_cast<TBoolProperty *>(m_pg->getProperty("Lock Position E/W"));
if (lockProp)
m_lockEWPosCheckbox =
new ToolOptionCheckbox(m_tool, lockProp, toolHandle, this);
// Lock N/S
lockProp =
dynamic_cast<TBoolProperty *>(m_pg->getProperty("Lock Position N/S"));
if (lockProp)
m_lockNSPosCheckbox =
new ToolOptionCheckbox(m_tool, lockProp, toolHandle, this);
// stacking order
m_soLabel = new QLabel(tr("SO:"), this);
m_soField = new PegbarChannelField(m_tool, TStageObject::T_SO, "field",
frameHandle, objHandle, xshHandle, this);
/* --- Rotation --- */
m_rotationField =
new PegbarChannelField(m_tool, TStageObject::T_Angle, "field",
frameHandle, objHandle, xshHandle, this);
/* --- Scale --- */
m_globalScaleField =
new PegbarChannelField(m_tool, TStageObject::T_Scale, "field",
frameHandle, objHandle, xshHandle, this);
m_scaleHField =
new PegbarChannelField(m_tool, TStageObject::T_ScaleX, "field",
frameHandle, objHandle, xshHandle, this);
m_scaleVField =
new PegbarChannelField(m_tool, TStageObject::T_ScaleY, "field",
frameHandle, objHandle, xshHandle, this);
TEnumProperty *scaleConstraintProp =
dynamic_cast<TEnumProperty *>(m_pg->getProperty("Scale Constraint:"));
if (scaleConstraintProp)
m_maintainCombo =
new ToolOptionCombo(m_tool, scaleConstraintProp, toolHandle);
// Lock Scale H
lockProp = dynamic_cast<TBoolProperty *>(m_pg->getProperty("Lock Scale H"));
if (lockProp)
m_lockScaleHCheckbox =
new ToolOptionCheckbox(m_tool, lockProp, toolHandle, this);
// Lock Scale V
lockProp = dynamic_cast<TBoolProperty *>(m_pg->getProperty("Lock Scale V"));
if (lockProp)
m_lockScaleVCheckbox =
new ToolOptionCheckbox(m_tool, lockProp, toolHandle, this);
/* --- Shear --- */
m_shearHField =
new PegbarChannelField(m_tool, TStageObject::T_ShearX, "field",
frameHandle, objHandle, xshHandle, this);
m_shearVField =
new PegbarChannelField(m_tool, TStageObject::T_ShearY, "field",
frameHandle, objHandle, xshHandle, this);
// Lock Shear H
lockProp = dynamic_cast<TBoolProperty *>(m_pg->getProperty("Lock Shear H"));
if (lockProp)
m_lockShearHCheckbox =
new ToolOptionCheckbox(m_tool, lockProp, toolHandle, this);
// Lock Scale V
lockProp = dynamic_cast<TBoolProperty *>(m_pg->getProperty("Lock Shear V"));
if (lockProp)
m_lockShearVCheckbox =
new ToolOptionCheckbox(m_tool, lockProp, toolHandle, this);
/* --- Center Position --- */
m_ewCenterField =
new PegbarCenterField(m_tool, 0, "field", objHandle, xshHandle, this);
m_nsCenterField =
new PegbarCenterField(m_tool, 1, "field", objHandle, xshHandle, this);
// Lock E/W Center
lockProp =
dynamic_cast<TBoolProperty *>(m_pg->getProperty("Lock Center E/W"));
if (lockProp)
m_lockEWCenterCheckbox =
new ToolOptionCheckbox(m_tool, lockProp, toolHandle, this);
// Lock N/S Center
lockProp =
dynamic_cast<TBoolProperty *>(m_pg->getProperty("Lock Center N/S"));
if (lockProp)
m_lockNSCenterCheckbox =
new ToolOptionCheckbox(m_tool, lockProp, toolHandle, this);
TBoolProperty *prop =
dynamic_cast<TBoolProperty *>(m_pg->getProperty("Global Key"));
if (prop)
m_globalKey = new ToolOptionCheckbox(m_tool, prop, toolHandle, this);
m_lockEWPosCheckbox->setObjectName("EditToolLockButton");
m_lockNSPosCheckbox->setObjectName("EditToolLockButton");
m_lockEWCenterCheckbox->setObjectName("EditToolLockButton");
m_lockNSCenterCheckbox->setObjectName("EditToolLockButton");
m_lockScaleHCheckbox->setObjectName("EditToolLockButton");
m_lockScaleVCheckbox->setObjectName("EditToolLockButton");
m_lockShearHCheckbox->setObjectName("EditToolLockButton");
m_lockShearVCheckbox->setObjectName("EditToolLockButton");
m_lockEWPosCheckbox->setText("");
m_lockNSPosCheckbox->setText("");
m_lockEWCenterCheckbox->setText("");
m_lockNSCenterCheckbox->setText("");
m_lockScaleHCheckbox->setText("");
m_lockScaleVCheckbox->setText("");
m_lockShearHCheckbox->setText("");
m_lockShearVCheckbox->setText("");
m_zField->setPrecision(4);
m_noScaleZField->setPrecision(4);
bool splined = isCurrentObjectSplined();
if (splined != m_splined) m_splined = splined;
setSplined(m_splined);
const int ITEM_SPACING = 10;
const int LABEL_SPACING = 3;
/* --- Layout --- */
/* --- Layout --- */
QHBoxLayout *mainLay = m_layout;
{
mainLay->addWidget(m_currentStageObjectCombo, 0);
mainLay->addWidget(m_chooseActiveAxisCombo, 0);
addSeparator();
mainLay->addWidget(m_mainStackedWidget, 1);
{
// Position
QFrame *posFrame = new QFrame(this);
QHBoxLayout *posLay = new QHBoxLayout();
posLay->setMargin(0);
posLay->setSpacing(0);
posFrame->setLayout(posLay);
m_mainStackedWidget->addWidget(posFrame);
{
posLay->addWidget(new QLabel(tr("Position"), this), 0);
posLay->addSpacing(ITEM_SPACING);
posLay->addWidget(m_motionPathPosField, 0);
posLay->addWidget(m_ewPosLabel, 0);
posLay->addSpacing(LABEL_SPACING);
posLay->addWidget(m_ewPosField, 10);
posLay->addWidget(m_lockEWPosCheckbox, 0);
posLay->addSpacing(ITEM_SPACING);
posLay->addWidget(m_nsPosLabel, 0);
posLay->addSpacing(LABEL_SPACING);
posLay->addWidget(m_nsPosField, 10);
posLay->addWidget(m_lockNSPosCheckbox, 0);
posLay->addSpacing(ITEM_SPACING);
posLay->addWidget(new QLabel(tr("Z:"), this), 0);
posLay->addSpacing(LABEL_SPACING);
posLay->addWidget(m_zField, 10);
posLay->addSpacing(LABEL_SPACING);
posLay->addWidget(new QLabel(tr("("), this), 0);
posLay->addWidget(m_noScaleZField, 10);
posLay->addWidget(new QLabel(tr(")"), this), 0);
posLay->addSpacing(ITEM_SPACING);
posLay->addWidget(m_soLabel, 0);
posLay->addWidget(m_soField, 10);
posLay->addStretch(1);
}
// Rotation
QFrame *rotFrame = new QFrame(this);
QHBoxLayout *rotLay = new QHBoxLayout();
rotLay->setMargin(0);
rotLay->setSpacing(0);
rotFrame->setLayout(rotLay);
m_mainStackedWidget->addWidget(rotFrame);
{
rotLay->addWidget(new QLabel(tr("Rotation"), this), 0);
rotLay->addSpacing(ITEM_SPACING);
rotLay->addWidget(m_rotationField, 10);
rotLay->addStretch(1);
}
// Scale
QFrame *scaleFrame = new QFrame(this);
QHBoxLayout *scaleLay = new QHBoxLayout();
scaleLay->setMargin(0);
scaleLay->setSpacing(0);
scaleFrame->setLayout(scaleLay);
m_mainStackedWidget->addWidget(scaleFrame);
{
scaleLay->addWidget(new QLabel(tr("Scale"), this), 0);
scaleLay->addSpacing(ITEM_SPACING);
scaleLay->addWidget(new QLabel(tr("Global:"), this), 0);
scaleLay->addSpacing(LABEL_SPACING);
scaleLay->addWidget(m_globalScaleField, 10);
scaleLay->addSpacing(ITEM_SPACING);
scaleLay->addWidget(new QLabel(tr("H:"), this), 0);
scaleLay->addSpacing(LABEL_SPACING);
scaleLay->addWidget(m_scaleHField, 10);
scaleLay->addWidget(m_lockScaleHCheckbox, 0);
scaleLay->addSpacing(ITEM_SPACING);
scaleLay->addWidget(new QLabel(tr("V:"), this), 0);
scaleLay->addSpacing(LABEL_SPACING);
scaleLay->addWidget(m_scaleVField, 10);
scaleLay->addWidget(m_lockScaleVCheckbox, 0);
scaleLay->addSpacing(ITEM_SPACING);
scaleLay->addWidget(new QLabel(tr("Maintain:"), this), 0);
scaleLay->addSpacing(LABEL_SPACING);
scaleLay->addWidget(m_maintainCombo, 0);
scaleLay->addStretch(1);
}
// Shear
QFrame *shearFrame = new QFrame(this);
QHBoxLayout *shearLay = new QHBoxLayout();
shearLay->setMargin(0);
shearLay->setSpacing(0);
shearFrame->setLayout(shearLay);
m_mainStackedWidget->addWidget(shearFrame);
{
shearLay->addWidget(new QLabel(tr("Shear"), this), 0);
shearLay->addSpacing(ITEM_SPACING);
shearLay->addWidget(new QLabel(tr("H:"), this), 0);
shearLay->addSpacing(LABEL_SPACING);
shearLay->addWidget(m_shearHField, 10);
shearLay->addWidget(m_lockShearHCheckbox, 0);
shearLay->addSpacing(ITEM_SPACING);
shearLay->addWidget(new QLabel(tr("V:"), this), 0);
shearLay->addSpacing(LABEL_SPACING);
shearLay->addWidget(m_shearVField, 10);
shearLay->addWidget(m_lockShearVCheckbox, 0);
shearLay->addSpacing(ITEM_SPACING);
shearLay->addStretch(1);
}
// Center Position
QFrame *centerPosFrame = new QFrame(this);
QHBoxLayout *centerPosLay = new QHBoxLayout();
centerPosLay->setMargin(0);
centerPosLay->setSpacing(0);
centerPosFrame->setLayout(centerPosLay);
m_mainStackedWidget->addWidget(centerPosFrame);
{
centerPosLay->addWidget(new QLabel(tr("Center Position"), this), 0);
centerPosLay->addSpacing(ITEM_SPACING);
centerPosLay->addWidget(new QLabel(tr("E/W:"), this), 0);
centerPosLay->addSpacing(LABEL_SPACING);
centerPosLay->addWidget(m_ewCenterField, 10);
centerPosLay->addWidget(m_lockEWCenterCheckbox, 0);
centerPosLay->addSpacing(ITEM_SPACING);
centerPosLay->addWidget(new QLabel(tr("N/S:"), this), 0);
centerPosLay->addSpacing(LABEL_SPACING);
centerPosLay->addWidget(m_nsCenterField, 10);
centerPosLay->addWidget(m_lockNSCenterCheckbox, 0);
centerPosLay->addStretch(1);
}
}
addSeparator();
mainLay->addWidget(m_globalKey, 0);
mainLay->addSpacing(5);
QHBoxLayout *pickLay = new QHBoxLayout();
pickLay->setMargin(0);
pickLay->setSpacing(0);
mainLay->addLayout(pickLay, 0);
{
pickLay->addWidget(new QLabel(tr("Pick:"), this), 0);
pickLay->addWidget(m_pickCombo, 0);
}
}
/* --- signal-slot connections --- */
// swap page when the active axis is changed
connect(m_chooseActiveAxisCombo, SIGNAL(currentIndexChanged(int)),
m_mainStackedWidget, SLOT(setCurrentIndex(int)));
// when the current stage object is changed via combo box, then switch the
// current stage object in the scene
connect(m_currentStageObjectCombo, SIGNAL(activated(int)), this,
SLOT(onCurrentStageObjectComboActivated(int)));
/* --- Assigning shortcut keys --- */
if (activeAxisProp->getId() != "") {
std::string actionName = "A_ToolOption_" + activeAxisProp->getId();
QAction *a = CommandManager::instance()->getAction(actionName.c_str());
if (a) {
m_chooseActiveAxisCombo->addAction(a);
QObject::connect(a, SIGNAL(triggered()), m_chooseActiveAxisCombo,
SLOT(doShowPopup()));
}
TEnumProperty::Range range = activeAxisProp->getRange();
TEnumProperty::Range::iterator it;
QSignalMapper *signalMapper = 0;
int index = 0;
for (it = range.begin(); it != range.end(); ++it, ++index) {
std::string item = ::to_string(*it);
std::string itemActionName = actionName + ":" + item;
a = CommandManager::instance()->getAction(itemActionName.c_str());
if (a) {
m_chooseActiveAxisCombo->addAction(a);
if (signalMapper == 0) {
signalMapper = new QSignalMapper(m_chooseActiveAxisCombo);
QObject::connect(signalMapper, SIGNAL(mapped(int)),
m_chooseActiveAxisCombo, SLOT(doOnActivated(int)));
}
QObject::connect(a, SIGNAL(triggered()), signalMapper, SLOT(map()));
signalMapper->setMapping(a, index);
}
}
}
if (scaleConstraintProp) {
m_scaleHField->onScaleTypeChanged(m_maintainCombo->currentIndex());
m_scaleVField->onScaleTypeChanged(m_maintainCombo->currentIndex());
connect(m_maintainCombo, SIGNAL(currentIndexChanged(int)), m_scaleHField,
SLOT(onScaleTypeChanged(int)));
connect(m_maintainCombo, SIGNAL(currentIndexChanged(int)), m_scaleVField,
SLOT(onScaleTypeChanged(int)));
}
}
//-----------------------------------------------------------------------------
void ArrowToolOptionsBox::showEvent(QShowEvent *) {
connect(m_frameHandle, SIGNAL(frameSwitched()), SLOT(onFrameSwitched()));
// if some stage object is added/removed, then reflect it to the combobox
connect(m_xshHandle, SIGNAL(xsheetSwitched()), this,
SLOT(updateStageObjectComboItems()));
connect(m_xshHandle, SIGNAL(xsheetChanged()), this,
SLOT(updateStageObjectComboItems()));
// If the current stage object is switched, then synchronize it to the
// combobox
connect(m_objHandle, SIGNAL(objectSwitched()), this,
SLOT(syncCurrentStageObjectComboItem()));
// update the item list in m_currentStageObjectCombo
updateStageObjectComboItems();
}
//-----------------------------------------------------------------------------
void ArrowToolOptionsBox::hideEvent(QShowEvent *) {
disconnect(m_frameHandle, SIGNAL(frameSwitched()), this,
SLOT(onFrameSwitched()));
disconnect(m_xshHandle, SIGNAL(xsheetSwitched()), this,
SLOT(updateStageObjectComboItems()));
disconnect(m_xshHandle, SIGNAL(xsheetChanged()), this,
SLOT(updateStageObjectComboItems()));
disconnect(m_objHandle, SIGNAL(objectSwitched()), this,
SLOT(syncCurrentStageObjectComboItem()));
}
//-----------------------------------------------------------------------------
void ArrowToolOptionsBox::setSplined(bool on) {
m_splined = on;
// Activate on selecting spline
m_motionPathPosField->setVisible(on);
// DEactivate on selecting spline
m_ewPosField->setVisible(!on);
m_nsPosField->setVisible(!on);
m_ewPosLabel->setVisible(!on);
m_nsPosLabel->setVisible(!on);
m_lockEWPosCheckbox->setVisible(!on);
m_lockNSPosCheckbox->setVisible(!on);
}
//-----------------------------------------------------------------------------
bool ArrowToolOptionsBox::isCurrentObjectSplined() const {
TStageObjectId objId = m_objHandle->getObjectId();
return m_xshHandle->getXsheet()->getStageObject(objId)->getSpline() != 0;
}
//-----------------------------------------------------------------------------
void ArrowToolOptionsBox::updateStatus() {
// General
m_chooseActiveAxisCombo->updateStatus();
m_pickCombo->updateStatus();
// Position
m_motionPathPosField->updateStatus();
m_ewPosField->updateStatus();
m_nsPosField->updateStatus();
m_zField->updateStatus();
m_noScaleZField->updateStatus();
m_soField->updateStatus();
// Rotation
m_rotationField->updateStatus();
// Scale
m_globalScaleField->updateStatus();
m_scaleHField->updateStatus();
m_scaleVField->updateStatus();
m_maintainCombo->updateStatus();
// Shear
m_shearHField->updateStatus();
m_shearVField->updateStatus();
// Center Position
m_ewCenterField->updateStatus();
m_nsCenterField->updateStatus();
bool splined = isCurrentObjectSplined();
if (splined != m_splined) setSplined(splined);
}
//-----------------------------------------------------------------------------
void ArrowToolOptionsBox::onStageObjectChange() { updateStatus(); }
//-----------------------------------------------------------------------------
/*! update the object list in combobox
*/
void ArrowToolOptionsBox::updateStageObjectComboItems() {
// clear items
m_currentStageObjectCombo->clear();
TXsheet *xsh = m_xshHandle->getXsheet();
TStageObjectId id;
for (int i = 0; i < xsh->getStageObjectTree()->getStageObjectCount(); i++) {
id = xsh->getStageObjectTree()->getStageObject(i)->getId();
if (id.isColumn()) {
int columnIndex = id.getIndex();
if (xsh->isColumnEmpty(columnIndex)) continue;
}
TStageObject *pegbar = xsh->getStageObject(id);
QString itemName = QString::fromStdString(pegbar->getName());
// store the item with ObjectId data
m_currentStageObjectCombo->addItem(itemName, (int)id.getCode());
}
// synchronize
syncCurrentStageObjectComboItem();
}
//------------------------------------------------------------------------------
/*! syncronize the current item in the combobox to the selected stage object
*/
void ArrowToolOptionsBox::syncCurrentStageObjectComboItem() {
TStageObjectId curObjId = m_objHandle->getObjectId();
int index = m_currentStageObjectCombo->findData((int)curObjId.getCode());
// if the item is found
if (index >= 0) m_currentStageObjectCombo->setCurrentIndex(index);
// if not found, add a new item. (This may happens when selecting the empty
// column.)
else {
TStageObject *pegbar = m_xshHandle->getXsheet()->getStageObject(curObjId);
QString itemName = QString::fromStdString(pegbar->getName());
// store the item with ObjectId data
m_currentStageObjectCombo->addItem(itemName, (int)curObjId.getCode());
// move the current index to it
m_currentStageObjectCombo->setCurrentIndex(
m_currentStageObjectCombo->findText(itemName));
}
}
//------------------------------------------------------------------------------
/*!change the current stage object when user changes it via combobox by hand
*/
void ArrowToolOptionsBox::onCurrentStageObjectComboActivated(int index) {
int code = m_currentStageObjectCombo->itemData(index).toInt();
TStageObjectId id;
id.setCode(code);
if (id == TStageObjectId::NoneId) {
std::cout << "Warning: "
"ArrowToolOptionsBox::onCurrentStageObjectComboActivated \nNo "
"stage object linked to the selected item found in the scene."
<< std::endl;
return;
}
// switch the current object
m_objHandle->setObjectId(id);
}
//=============================================================================
//
// SelectionToolOptionsBox
//
//=============================================================================
IconViewField::IconViewField(QWidget *parent, IconType iconType)
: QWidget(parent), m_iconType(iconType) {
setMinimumSize(21, 25);
}
void IconViewField::paintEvent(QPaintEvent *e) {
QPainter p(this);
// La pixmap e' alta 17 px, il widget 23. Per centrarla faccio il draw a 3 px.
p.drawPixmap(QRect(0, 3, 21, 17), m_pm[m_iconType]);
}
//-----------------------------------------------------------------------------
SelectionToolOptionsBox::SelectionToolOptionsBox(QWidget *parent, TTool *tool,
TPaletteHandle *pltHandle,
ToolHandle *toolHandle)
: ToolOptionsBox(parent)
, m_tool(tool)
, m_isVectorSelction(false)
, m_setSaveboxCheckbox(0) {
TPropertyGroup *props = tool->getProperties(0);
assert(props->getPropertyCount() > 0);
RasterSelectionTool *rasterSelectionTool =
dynamic_cast<RasterSelectionTool *>(tool);
SelectionTool *selectionTool = dynamic_cast<SelectionTool *>(tool);
ToolOptionControlBuilder builder(this, tool, pltHandle, toolHandle);
if (tool && tool->getProperties(0)) tool->getProperties(0)->accept(builder);
IconViewField *iconView =
new IconViewField(this, IconViewField::Icon_ScalePeg);
m_scaleXLabel = new QLabel(tr("H:"), this);
m_scaleXField = new SelectionScaleField(selectionTool, 0, "Scale X");
m_scaleYLabel = new QLabel(tr("V:"), this);
m_scaleYField = new SelectionScaleField(selectionTool, 1, "Scale Y");
m_scaleLink = new DVGui::CheckBox(tr("Link"), this);
IconViewField *rotIconView =
new IconViewField(this, IconViewField::Icon_Rotation);
m_rotationField = new SelectionRotationField(selectionTool, tr("Rotation"));
IconViewField *moveIconView =
new IconViewField(this, IconViewField::Icon_Position);
m_moveXLabel = new QLabel(tr("E/W:"), this);
m_moveXField = new SelectionMoveField(selectionTool, 0, "Move X");
m_moveYLabel = addLabel(tr("N/S:"));
m_moveYField = new SelectionMoveField(selectionTool, 1, "Move Y");
if (rasterSelectionTool) {
TBoolProperty *modifySetSaveboxProp =
rasterSelectionTool->getModifySaveboxProperty();
if (modifySetSaveboxProp)
m_setSaveboxCheckbox =
new ToolOptionCheckbox(rasterSelectionTool, modifySetSaveboxProp);
}
m_scaleXLabel->setEnabled(false);
m_scaleYLabel->setEnabled(false);
m_moveXLabel->setEnabled(false);
m_moveYLabel->setEnabled(false);
//--- layout ----
addSeparator();
hLayout()->addWidget(iconView, 0);
hLayout()->addWidget(m_scaleXLabel, 0);
hLayout()->addWidget(m_scaleXField, 10);
hLayout()->addWidget(m_scaleYLabel, 0);
hLayout()->addWidget(m_scaleYField, 10);
hLayout()->addSpacing(4);
hLayout()->addWidget(m_scaleLink, 0);
addSeparator();
hLayout()->addWidget(rotIconView, 0);
hLayout()->addWidget(m_rotationField, 10);
addSeparator();
hLayout()->addWidget(moveIconView, 0);
hLayout()->addWidget(m_moveXLabel, 0);
hLayout()->addWidget(m_moveXField, 10);
hLayout()->addWidget(m_moveYLabel, 0);
hLayout()->addWidget(m_moveYField, 10);
if (m_setSaveboxCheckbox) {
addSeparator();
hLayout()->addWidget(m_setSaveboxCheckbox, 0);
}
VectorSelectionTool *vectorSelectionTool =
dynamic_cast<VectorSelectionTool *>(tool);
if (vectorSelectionTool) {
m_isVectorSelction = true;
// change Thick
IconViewField *thicknessIconView =
new IconViewField(this, IconViewField::Icon_Thickness);
m_thickChangeField = new ThickChangeField(selectionTool, tr("Thickness"));
addSeparator();
hLayout()->addWidget(thicknessIconView, 0);
hLayout()->addWidget(m_thickChangeField, 10);
// Outline options
// Outline options
ToolOptionControlBuilder builder(this, tool, pltHandle, toolHandle);
builder.setEnumWidgetType(ToolOptionControlBuilder::POPUPBUTTON);
builder.setSingleValueWidgetType(ToolOptionControlBuilder::FIELD);
addSeparator();
if (tool && tool->getProperties(1)) tool->getProperties(1)->accept(builder);
m_capStyle = dynamic_cast<ToolOptionPopupButton *>(m_controls.value("Cap"));
m_joinStyle =
dynamic_cast<ToolOptionPopupButton *>(m_controls.value("Join"));
m_miterField =
dynamic_cast<ToolOptionIntSlider *>(m_controls.value("Miter:"));
m_miterField->setEnabled(m_joinStyle->currentIndex() ==
TStroke::OutlineOptions::MITER_JOIN);
onPropertyChanged();
}
hLayout()->addStretch(1);
// assert(ret);
bool ret = connect(m_scaleXField, SIGNAL(valueChange()),
SLOT(onScaleXValueChanged()));
ret = ret && connect(m_scaleYField, SIGNAL(valueChange()),
SLOT(onScaleYValueChanged()));
if (m_setSaveboxCheckbox)
ret = ret && connect(m_setSaveboxCheckbox, SIGNAL(toggled(bool)),
SLOT(onSetSaveboxCheckboxChanged(bool)));
// assert(ret);
updateStatus();
}
//-----------------------------------------------------------------------------
void SelectionToolOptionsBox::updateStatus() {
QMap<std::string, ToolOptionControl *>::iterator it;
for (it = m_controls.begin(); it != m_controls.end(); it++)
it.value()->updateStatus();
if (m_setSaveboxCheckbox) {
bool disable = m_setSaveboxCheckbox->checkState() == Qt::Checked;
for (int i = 0; i < hLayout()->count(); i++) {
QWidget *w = hLayout()->itemAt(i)->widget();
if (w && w != m_setSaveboxCheckbox) w->setEnabled(!disable);
}
if (disable) return;
}
m_scaleXField->updateStatus();
m_scaleXLabel->setEnabled(m_scaleXField->isEnabled());
m_scaleYField->updateStatus();
m_scaleYLabel->setEnabled(m_scaleXField->isEnabled());
m_rotationField->updateStatus();
m_moveXField->updateStatus();
m_moveXLabel->setEnabled(m_moveXField->isEnabled());
m_moveYField->updateStatus();
m_moveYLabel->setEnabled(m_moveYField->isEnabled());
if (m_isVectorSelction) {
m_thickChangeField->updateStatus();
onPropertyChanged();
}
}
//-----------------------------------------------------------------------------
void SelectionToolOptionsBox::onScaleXValueChanged() {
if (!m_scaleLink->isChecked() ||
m_scaleXField->getValue() == m_scaleYField->getValue())
return;
m_scaleYField->setValue(m_scaleXField->getValue());
m_scaleYField->applyChange();
}
//-----------------------------------------------------------------------------
void SelectionToolOptionsBox::onScaleYValueChanged() {
if (!m_scaleLink->isChecked() ||
m_scaleXField->getValue() == m_scaleYField->getValue())
return;
m_scaleXField->setValue(m_scaleYField->getValue());
m_scaleXField->applyChange();
}
//-----------------------------------------------------------------------------
void SelectionToolOptionsBox::onSetSaveboxCheckboxChanged(bool) {
updateStatus();
}
//-----------------------------------------------------------------------------
void SelectionToolOptionsBox::onPropertyChanged() {
// Check the selection's outline styles group.
VectorSelectionTool *tool = (VectorSelectionTool *)m_tool;
int capStyle, joinStyle;
tool->selectionOutlineStyle(capStyle, joinStyle);
// Show a void icon when no homogeneous style is found
if (capStyle < 0)
m_capStyle->setIcon(QPixmap());
else
// m_capStyle->setIcon(m_capStyle->currentItem()->icon());
m_capStyle->setCurrentIndex(capStyle);
if (joinStyle < 0)
m_joinStyle->setIcon(QPixmap());
else
m_joinStyle->setCurrentIndex(joinStyle);
// m_joinStyle->setIcon(m_joinStyle->currentItem()->icon());
// Enable the miter field only in case the join is of type miter
m_miterField->setEnabled(joinStyle == TStroke::OutlineOptions::MITER_JOIN);
}
//=============================================================================
//
// GeometricToolOptionsBox
//
//=============================================================================
GeometricToolOptionsBox::GeometricToolOptionsBox(QWidget *parent, TTool *tool,
TPaletteHandle *pltHandle,
ToolHandle *toolHandle)
: ToolOptionsBox(parent)
, m_targetType(tool->getTargetType())
, m_poligonSideLabel(0)
, m_hardnessLabel(0)
, m_hardnessField(0)
, m_poligonSideField(0)
, m_shapeField(0)
, m_pencilMode(0) {
setFrameStyle(QFrame::StyledPanel);
setFixedHeight(26);
TPropertyGroup *props = tool->getProperties(0);
assert(props->getPropertyCount() > 0);
ToolOptionControlBuilder builder(this, tool, pltHandle, toolHandle);
if (tool && tool->getProperties(0)) tool->getProperties(0)->accept(builder);
builder.setEnumWidgetType(ToolOptionControlBuilder::POPUPBUTTON);
builder.setSingleValueWidgetType(ToolOptionControlBuilder::FIELD);
addSeparator();
if (tool && tool->getProperties(1)) tool->getProperties(1)->accept(builder);
hLayout()->addStretch(1);
m_hardnessField =
dynamic_cast<ToolOptionSlider *>(m_controls.value("Hardness:"));
if (m_hardnessField)
m_hardnessLabel = m_labels.value(m_hardnessField->propertyName());
m_shapeField = dynamic_cast<ToolOptionCombo *>(m_controls.value("Shape:"));
m_poligonSideField =
dynamic_cast<ToolOptionIntSlider *>(m_controls.value("Polygon Sides:"));
if (m_poligonSideField)
m_poligonSideLabel = m_labels.value(m_poligonSideField->propertyName());
m_pencilMode =
dynamic_cast<ToolOptionCheckbox *>(m_controls.value("Pencil Mode"));
if (m_shapeField->currentText().toStdWString() != L"Polygon") {
m_poligonSideLabel->setEnabled(false);
m_poligonSideField->setEnabled(false);
}
bool ret = connect(m_shapeField, SIGNAL(currentIndexChanged(int)), this,
SLOT(onShapeValueChanged()));
if (m_pencilMode) {
if (m_pencilMode->isChecked()) {
m_hardnessLabel->setEnabled(false);
m_hardnessField->setEnabled(false);
}
ret = ret && connect(m_pencilMode, SIGNAL(toggled(bool)), this,
SLOT(onPencilModeToggled(bool)));
}
ToolOptionPopupButton *m_joinStyle =
dynamic_cast<ToolOptionPopupButton *>(m_controls.value("Join"));
m_miterField =
dynamic_cast<ToolOptionIntSlider *>(m_controls.value("Miter:"));
m_miterField->setEnabled(m_joinStyle->currentIndex() ==
TStroke::OutlineOptions::MITER_JOIN);
assert(m_joinStyle && m_miterField);
connect(m_joinStyle, SIGNAL(activated(int)), this,
SLOT(onJoinStyleChanged(int)));
assert(ret);
}
//-----------------------------------------------------------------------------
void GeometricToolOptionsBox::updateStatus() {
QMap<std::string, ToolOptionControl *>::iterator it;
for (it = m_controls.begin(); it != m_controls.end(); it++)
it.value()->updateStatus();
}
//-----------------------------------------------------------------------------
void GeometricToolOptionsBox::onShapeValueChanged() {
bool enabled = m_shapeField->currentText() == QString("Polygon");
m_poligonSideLabel->setEnabled(enabled);
m_poligonSideField->setEnabled(enabled);
}
//-----------------------------------------------------------------------------
void GeometricToolOptionsBox::onPencilModeToggled(bool value) {
m_hardnessLabel->setEnabled(!value);
m_hardnessField->setEnabled(!value);
}
//-----------------------------------------------------------------------------
void GeometricToolOptionsBox::onJoinStyleChanged(int joinStyle) {
m_miterField->setEnabled(joinStyle == TStroke::OutlineOptions::MITER_JOIN);
}
//=============================================================================
//
// TypeToolOptionsBox
//
//=============================================================================
TypeToolOptionsBox::TypeToolOptionsBox(QWidget *parent, TTool *tool,
TPaletteHandle *pltHandle,
ToolHandle *toolHandle)
: ToolOptionsBox(parent), m_tool(tool) {
TPropertyGroup *props = tool->getProperties(0);
assert(props->getPropertyCount() > 0);
ToolOptionControlBuilder builder(this, tool, pltHandle, toolHandle);
if (tool && tool->getProperties(0)) tool->getProperties(0)->accept(builder);
m_layout->addStretch(0);
bool ret = true;
ToolOptionCombo *fontField =
dynamic_cast<ToolOptionCombo *>(m_controls.value("Font:"));
ret &&connect(fontField, SIGNAL(currentIndexChanged(int)), this,
SLOT(onFieldChanged()));
#ifndef MACOSX
ToolOptionCombo *styleField =
dynamic_cast<ToolOptionCombo *>(m_controls.value("Style:"));
ret &&connect(styleField, SIGNAL(currentIndexChanged(int)), this,
SLOT(onFieldChanged()));
#endif
ToolOptionCombo *sizeField =
dynamic_cast<ToolOptionCombo *>(m_controls.value("Size:"));
ret &&connect(sizeField, SIGNAL(currentIndexChanged(int)), this,
SLOT(onFieldChanged()));
ToolOptionCheckbox *orientationField = dynamic_cast<ToolOptionCheckbox *>(
m_controls.value("Vertical Orientation"));
ret = ret && connect(orientationField, SIGNAL(stateChanged(int)), this,
SLOT(onFieldChanged()));
assert(ret);
}
//-----------------------------------------------------------------------------
void TypeToolOptionsBox::updateStatus() {
QMap<std::string, ToolOptionControl *>::iterator it;
for (it = m_controls.begin(); it != m_controls.end(); it++)
it.value()->updateStatus();
}
//-----------------------------------------------------------------------------
void TypeToolOptionsBox::onFieldChanged() {
assert(m_tool);
m_tool->getViewer()->setFocus();
}
//=============================================================================
//
// PaintbrushToolOptionsBox
//
//=============================================================================
PaintbrushToolOptionsBox::PaintbrushToolOptionsBox(QWidget *parent, TTool *tool,
TPaletteHandle *pltHandle,
ToolHandle *toolHandle)
: ToolOptionsBox(parent) {
TPropertyGroup *props = tool->getProperties(0);
assert(props->getPropertyCount() > 0);
ToolOptionControlBuilder builder(this, tool, pltHandle, toolHandle);
if (tool && tool->getProperties(0)) tool->getProperties(0)->accept(builder);
hLayout()->addStretch(1);
m_colorMode = dynamic_cast<ToolOptionCombo *>(m_controls.value("Mode:"));
m_selectiveMode =
dynamic_cast<ToolOptionCheckbox *>(m_controls.value("Selective"));
if (m_colorMode->currentText().toStdWString() == L"Lines")
m_selectiveMode->setEnabled(false);
bool ret = connect(m_colorMode, SIGNAL(currentIndexChanged(int)), this,
SLOT(onColorModeChanged()));
assert(ret);
}
//-----------------------------------------------------------------------------
void PaintbrushToolOptionsBox::updateStatus() {
QMap<std::string, ToolOptionControl *>::iterator it;
for (it = m_controls.begin(); it != m_controls.end(); it++)
it.value()->updateStatus();
}
//-----------------------------------------------------------------------------
void PaintbrushToolOptionsBox::onColorModeChanged() {
bool enabled = m_colorMode->currentText() != QString("Lines");
m_selectiveMode->setEnabled(enabled);
}
//=============================================================================
//
// FillToolOptionsBox
//
//=============================================================================
FillToolOptionsBox::FillToolOptionsBox(QWidget *parent, TTool *tool,
TPaletteHandle *pltHandle,
ToolHandle *toolHandle)
: ToolOptionsBox(parent)
, m_targetType(tool->getTargetType())
, m_fillDepthLabel(0)
, m_fillDepthField(0)
, m_segmentMode(0) {
TPropertyGroup *props = tool->getProperties(0);
assert(props->getPropertyCount() > 0);
ToolOptionControlBuilder builder(this, tool, pltHandle, toolHandle);
if (tool && tool->getProperties(0)) tool->getProperties(0)->accept(builder);
m_layout->addStretch(0);
m_toolType = dynamic_cast<ToolOptionCombo *>(m_controls.value("Type:"));
m_colorMode = dynamic_cast<ToolOptionCombo *>(m_controls.value("Mode:"));
m_selectiveMode =
dynamic_cast<ToolOptionCheckbox *>(m_controls.value("Selective"));
m_fillDepthField =
dynamic_cast<ToolOptionPairSlider *>(m_controls.value("Fill Depth"));
if (m_fillDepthField)
m_fillDepthLabel = m_labels.value(m_fillDepthField->propertyName());
m_segmentMode =
dynamic_cast<ToolOptionCheckbox *>(m_controls.value("Segment"));
m_onionMode =
dynamic_cast<ToolOptionCheckbox *>(m_controls.value("Onion Skin"));
m_multiFrameMode =
dynamic_cast<ToolOptionCheckbox *>(m_controls.value("Frame Range"));
bool ret = connect(m_colorMode, SIGNAL(currentIndexChanged(int)), this,
SLOT(onColorModeChanged()));
ret = ret && connect(m_toolType, SIGNAL(currentIndexChanged(int)), this,
SLOT(onToolTypeChanged()));
ret = ret && connect(m_onionMode, SIGNAL(toggled(bool)), this,
SLOT(onOnionModeToggled(bool)));
ret = ret && connect(m_multiFrameMode, SIGNAL(toggled(bool)), this,
SLOT(onMultiFrameModeToggled(bool)));
assert(ret);
if (m_colorMode->currentText().toStdWString() == L"Lines") {
m_selectiveMode->setEnabled(false);
if (m_fillDepthLabel && m_fillDepthField) {
m_fillDepthLabel->setEnabled(false);
m_fillDepthField->setEnabled(false);
}
if (m_toolType->currentText() == QString("Normal") ||
m_multiFrameMode->isChecked())
m_onionMode->setEnabled(false);
}
if (m_toolType->currentText().toStdWString() != L"Normal") {
if (m_segmentMode) m_segmentMode->setEnabled(false);
if (m_colorMode->currentText() == QString("Lines") ||
m_multiFrameMode->isChecked())
m_onionMode->setEnabled(false);
}
if (m_onionMode->isChecked()) m_multiFrameMode->setEnabled(false);
}
//-----------------------------------------------------------------------------
void FillToolOptionsBox::updateStatus() {
QMap<std::string, ToolOptionControl *>::iterator it;
for (it = m_controls.begin(); it != m_controls.end(); it++)
it.value()->updateStatus();
}
//-----------------------------------------------------------------------------
void FillToolOptionsBox::onColorModeChanged() {
bool enabled = m_colorMode->currentText() != QString("Lines");
m_selectiveMode->setEnabled(enabled);
if (m_fillDepthLabel && m_fillDepthField) {
m_fillDepthLabel->setEnabled(enabled);
m_fillDepthField->setEnabled(enabled);
}
if (m_segmentMode) {
enabled = m_colorMode->currentText() != QString("Areas");
m_segmentMode->setEnabled(
enabled ? m_toolType->currentText() == QString("Normal") : false);
}
enabled = m_colorMode->currentText() != QString("Lines") &&
!m_multiFrameMode->isChecked();
m_onionMode->setEnabled(enabled);
}
//-----------------------------------------------------------------------------
void FillToolOptionsBox::onToolTypeChanged() {
bool enabled = m_toolType->currentText() == QString("Normal");
if (m_segmentMode)
m_segmentMode->setEnabled(
enabled ? m_colorMode->currentText() != QString("Areas") : false);
enabled = enabled || (m_colorMode->currentText() != QString("Lines") &&
!m_multiFrameMode->isChecked());
m_onionMode->setEnabled(enabled);
}
//-----------------------------------------------------------------------------
void FillToolOptionsBox::onOnionModeToggled(bool value) {
m_multiFrameMode->setEnabled(!value);
}
//-----------------------------------------------------------------------------
void FillToolOptionsBox::onMultiFrameModeToggled(bool value) {
m_onionMode->setEnabled(!value);
}
//=============================================================================
//
// BrushToolOptionsBox classes
//
//=============================================================================
class BrushToolOptionsBox::PresetNamePopup final : public DVGui::Dialog {
DVGui::LineEdit *m_nameFld;
public:
PresetNamePopup() : Dialog(0, true) {
setWindowTitle(tr("Preset Name"));
m_nameFld = new DVGui::LineEdit();
addWidget(m_nameFld);
QPushButton *okBtn = new QPushButton(tr("OK"), this);
okBtn->setDefault(true);
QPushButton *cancelBtn = new QPushButton(tr("Cancel"), this);
connect(okBtn, SIGNAL(clicked()), this, SLOT(accept()));
connect(cancelBtn, SIGNAL(clicked()), this, SLOT(reject()));
addButtonBarWidget(okBtn, cancelBtn);
}
QString getName() { return m_nameFld->text(); }
void removeName() { m_nameFld->setText(QString("")); }
};
//=============================================================================
//
// BrushToolOptionsBox
//
//=============================================================================
BrushToolOptionsBox::BrushToolOptionsBox(QWidget *parent, TTool *tool,
TPaletteHandle *pltHandle,
ToolHandle *toolHandle)
: ToolOptionsBox(parent)
, m_tool(tool)
, m_presetNamePopup(0)
, m_pencilMode(0)
, m_hardnessLabel(0)
, m_joinStyleCombo(0)
, m_miterField(0) {
TPropertyGroup *props = tool->getProperties(0);
assert(props->getPropertyCount() > 0);
ToolOptionControlBuilder builder(this, tool, pltHandle, toolHandle);
if (tool && tool->getProperties(0)) tool->getProperties(0)->accept(builder);
m_hardnessField =
dynamic_cast<ToolOptionSlider *>(m_controls.value("Hardness:"));
if (m_hardnessField)
m_hardnessLabel = m_labels.value(m_hardnessField->propertyName());
m_pencilMode = dynamic_cast<ToolOptionCheckbox *>(m_controls.value("Pencil"));
m_presetCombo = dynamic_cast<ToolOptionCombo *>(m_controls.value("Preset:"));
// Preset +/- buttons
m_addPresetButton = new QPushButton(QString("+"));
m_removePresetButton = new QPushButton(QString("-"));
m_addPresetButton->setFixedSize(QSize(20, 20));
m_removePresetButton->setFixedSize(QSize(20, 20));
hLayout()->addWidget(m_addPresetButton);
hLayout()->addWidget(m_removePresetButton);
connect(m_addPresetButton, SIGNAL(clicked()), this, SLOT(onAddPreset()));
connect(m_removePresetButton, SIGNAL(clicked()), this,
SLOT(onRemovePreset()));
if (tool->getTargetType() & TTool::ToonzImage) {
assert(m_pencilMode);
bool ret = connect(m_pencilMode, SIGNAL(toggled(bool)), this,
SLOT(onPencilModeToggled(bool)));
assert(ret);
if (m_pencilMode->isChecked()) {
m_hardnessLabel->setEnabled(false);
m_hardnessField->setEnabled(false);
}
} else if (tool->getTargetType() & TTool::Vectors) {
// Further vector options
builder.setEnumWidgetType(ToolOptionControlBuilder::POPUPBUTTON);
builder.setSingleValueWidgetType(ToolOptionControlBuilder::FIELD);
addSeparator();
if (tool && tool->getProperties(1)) tool->getProperties(1)->accept(builder);
m_joinStyleCombo =
dynamic_cast<ToolOptionPopupButton *>(m_controls.value("Join"));
m_miterField =
dynamic_cast<ToolOptionIntSlider *>(m_controls.value("Miter:"));
m_miterField->setEnabled(m_joinStyleCombo->currentIndex() ==
TStroke::OutlineOptions::MITER_JOIN);
}
hLayout()->addStretch(1);
}
//-----------------------------------------------------------------------------
void BrushToolOptionsBox::updateStatus() {
QMap<std::string, ToolOptionControl *>::iterator it;
for (it = m_controls.begin(); it != m_controls.end(); it++)
it.value()->updateStatus();
if (m_miterField)
m_miterField->setEnabled(m_joinStyleCombo->currentIndex() ==
TStroke::OutlineOptions::MITER_JOIN);
}
//-----------------------------------------------------------------------------
void BrushToolOptionsBox::onPencilModeToggled(bool value) {
m_hardnessLabel->setEnabled(!value);
m_hardnessField->setEnabled(!value);
}
//-----------------------------------------------------------------------------
void BrushToolOptionsBox::onAddPreset() {
// Initialize preset name popup
if (!m_presetNamePopup) m_presetNamePopup = new PresetNamePopup;
if (!m_presetNamePopup->getName().isEmpty()) m_presetNamePopup->removeName();
// Retrieve the preset name
bool ret = m_presetNamePopup->exec();
if (!ret) return;
QString name(m_presetNamePopup->getName());
m_presetNamePopup->removeName();
switch (m_tool->getTargetType() & TTool::CommonImages) {
case TTool::VectorImage:
case TTool::ToonzImage: {
static_cast<BrushTool *>(m_tool)->addPreset(name);
break;
}
case TTool::RasterImage: {
static_cast<FullColorBrushTool *>(m_tool)->addPreset(name);
break;
}
}
m_presetCombo->loadEntries();
}
//-----------------------------------------------------------------------------
void BrushToolOptionsBox::onRemovePreset() {
switch (m_tool->getTargetType() & TTool::CommonImages) {
case TTool::VectorImage:
case TTool::ToonzImage: {
static_cast<BrushTool *>(m_tool)->removePreset();
break;
}
case TTool::RasterImage: {
static_cast<FullColorBrushTool *>(m_tool)->removePreset();
break;
}
}
m_presetCombo->loadEntries();
}
//=============================================================================
//
// EraserToolOptionsBox
//
//=============================================================================
EraserToolOptionsBox::EraserToolOptionsBox(QWidget *parent, TTool *tool,
TPaletteHandle *pltHandle,
ToolHandle *toolHandle)
: ToolOptionsBox(parent), m_pencilMode(0), m_colorMode(0) {
TPropertyGroup *props = tool->getProperties(0);
assert(props->getPropertyCount() > 0);
ToolOptionControlBuilder builder(this, tool, pltHandle, toolHandle);
if (tool && tool->getProperties(0)) tool->getProperties(0)->accept(builder);
hLayout()->addStretch(1);
m_toolType = dynamic_cast<ToolOptionCombo *>(m_controls.value("Type:"));
m_hardnessField =
dynamic_cast<ToolOptionSlider *>(m_controls.value("Hardness:"));
if (m_hardnessField)
m_hardnessLabel = m_labels.value(m_hardnessField->propertyName());
m_colorMode = dynamic_cast<ToolOptionCombo *>(m_controls.value("Mode:"));
m_invertMode = dynamic_cast<ToolOptionCheckbox *>(m_controls.value("Invert"));
m_multiFrameMode =
dynamic_cast<ToolOptionCheckbox *>(m_controls.value("Frame Range"));
m_pencilMode =
dynamic_cast<ToolOptionCheckbox *>(m_controls.value("Pencil Mode"));
bool ret = true;
if (m_pencilMode) {
ret = ret && connect(m_pencilMode, SIGNAL(toggled(bool)), this,
SLOT(onPencilModeToggled(bool)));
ret = ret && connect(m_colorMode, SIGNAL(currentIndexChanged(int)), this,
SLOT(onColorModeChanged()));
}
ret = ret && connect(m_toolType, SIGNAL(currentIndexChanged(int)), this,
SLOT(onToolTypeChanged()));
if (m_pencilMode && m_pencilMode->isChecked()) {
assert(m_hardnessField && m_hardnessLabel);
m_hardnessField->setEnabled(false);
m_hardnessLabel->setEnabled(false);
}
if (m_toolType && m_toolType->currentText() == QString("Normal")) {
m_invertMode->setEnabled(false);
m_multiFrameMode->setEnabled(false);
}
if (m_colorMode && m_colorMode->currentText() == QString("Areas")) {
assert(m_hardnessField && m_hardnessLabel && m_pencilMode);
m_pencilMode->setEnabled(false);
m_hardnessField->setEnabled(false);
m_hardnessLabel->setEnabled(false);
}
}
//-----------------------------------------------------------------------------
void EraserToolOptionsBox::updateStatus() {
QMap<std::string, ToolOptionControl *>::iterator it;
for (it = m_controls.begin(); it != m_controls.end(); it++)
it.value()->updateStatus();
}
//-----------------------------------------------------------------------------
void EraserToolOptionsBox::onPencilModeToggled(bool value) {
if (m_hardnessField && m_hardnessLabel) {
m_hardnessField->setEnabled(!value);
m_hardnessLabel->setEnabled(!value);
}
}
//-----------------------------------------------------------------------------
void EraserToolOptionsBox::onToolTypeChanged() {
bool value = m_toolType && m_toolType->currentText() != QString("Normal");
m_invertMode->setEnabled(value);
m_multiFrameMode->setEnabled(value);
}
//-----------------------------------------------------------------------------
void EraserToolOptionsBox::onColorModeChanged() {
bool enabled = m_colorMode->currentText() != QString("Areas");
if (m_pencilMode && m_hardnessField && m_hardnessLabel) {
m_pencilMode->setEnabled(enabled);
m_hardnessField->setEnabled(enabled ? !m_pencilMode->isChecked() : false);
m_hardnessLabel->setEnabled(enabled ? !m_pencilMode->isChecked() : false);
}
}
//=============================================================================
//
// RulerToolOptionsBox
//
//=============================================================================
class ToolOptionsBarSeparator final : public QWidget {
public:
ToolOptionsBarSeparator(QWidget *parent) : QWidget(parent) {
setFixedSize(2, 26);
}
void paintEvent(QPaintEvent *) {
QPainter p(this);
p.setPen(QColor(64, 64, 64));
p.drawLine(0, 0, 0, 25);
p.setPen(Qt::white);
p.drawLine(1, 0, 1, 25);
}
};
RulerToolOptionsBox::RulerToolOptionsBox(QWidget *parent, TTool *tool)
: ToolOptionsBox(parent), m_tool(tool) {
setFrameStyle(QFrame::StyledPanel);
setFixedHeight(26);
m_Xfld = new MeasuredValueField(this);
m_Yfld = new MeasuredValueField(this);
m_Wfld = new MeasuredValueField(this);
m_Hfld = new MeasuredValueField(this);
m_Afld = new MeasuredValueField(this);
m_Lfld = new MeasuredValueField(this);
m_XpixelFld = new QLabel(this);
m_YpixelFld = new QLabel(this);
m_WpixelFld = new QLabel(this);
m_HpixelFld = new QLabel(this);
m_Afld->setMeasure("angle");
if (Preferences::instance()->getUnits() == "pixel") {
m_Xfld->setMeasure("length.x");
m_Yfld->setMeasure("length.y");
m_Wfld->setMeasure("length.x");
m_Hfld->setMeasure("length.y");
m_Lfld->setMeasure("length.x");
}
m_Xfld->setObjectName("RulerToolOptionValues");
m_Yfld->setObjectName("RulerToolOptionValues");
m_Wfld->setObjectName("RulerToolOptionValues");
m_Hfld->setObjectName("RulerToolOptionValues");
m_Afld->setObjectName("RulerToolOptionValues");
m_Lfld->setObjectName("RulerToolOptionValues");
setStyleSheet(
"#RulerToolOptionValues {border:0px; background: rgb(196,196,196);}");
m_Xfld->setMaximumWidth(70);
m_Yfld->setMaximumWidth(70);
m_Wfld->setMaximumWidth(70);
m_Hfld->setMaximumWidth(70);
m_Afld->setMaximumWidth(70);
m_Lfld->setMaximumWidth(70);
m_Xfld->setReadOnly(true);
m_Yfld->setReadOnly(true);
m_Wfld->setReadOnly(true);
m_Hfld->setReadOnly(true);
m_Afld->setReadOnly(true);
m_Lfld->setReadOnly(true);
// layout
QHBoxLayout *lay = new QHBoxLayout();
lay->setMargin(0);
lay->setSpacing(3);
{
lay->addWidget(new QLabel("X:", this), 0);
lay->addWidget(m_Xfld, 0);
lay->addWidget(m_XpixelFld, 0);
lay->addSpacing(3);
lay->addWidget(new QLabel("Y:", this), 0);
lay->addWidget(m_Yfld, 0);
lay->addWidget(m_YpixelFld, 0);
lay->addSpacing(3);
lay->addWidget(new ToolOptionsBarSeparator(this), 0);
lay->addSpacing(3);
lay->addWidget(new QLabel("W:", this), 0);
lay->addWidget(m_Wfld, 0);
lay->addWidget(m_WpixelFld, 0);
lay->addSpacing(3);
lay->addWidget(new QLabel("H:", this), 0);
lay->addWidget(m_Hfld, 0);
lay->addWidget(m_HpixelFld, 0);
lay->addSpacing(3);
lay->addWidget(new ToolOptionsBarSeparator(this), 0);
lay->addSpacing(3);
lay->addWidget(new QLabel("A:", this), 0);
lay->addWidget(m_Afld, 0);
lay->addSpacing(3);
lay->addWidget(new QLabel("L:", this), 0);
lay->addWidget(m_Lfld, 0);
}
m_layout->addLayout(lay, 0);
m_layout->addStretch(1);
}
void RulerToolOptionsBox::updateValues(bool isRasterLevelEditing, double X,
double Y, double W, double H, double A,
double L, int Xpix, int Ypix, int Wpix,
int Hpix) {
m_Xfld->setValue(X);
m_Yfld->setValue(Y);
m_Wfld->setValue(W);
m_Hfld->setValue(H);
m_Afld->setValue(A);
m_Lfld->setValue(L);
m_XpixelFld->setVisible(isRasterLevelEditing);
m_YpixelFld->setVisible(isRasterLevelEditing);
m_WpixelFld->setVisible(isRasterLevelEditing);
m_HpixelFld->setVisible(isRasterLevelEditing);
if (isRasterLevelEditing) {
m_XpixelFld->setText(QString("(%1)").arg(Xpix));
m_YpixelFld->setText(QString("(%1)").arg(Ypix));
m_WpixelFld->setText(QString("(%1)").arg(Wpix));
m_HpixelFld->setText(QString("(%1)").arg(Hpix));
}
repaint();
}
void RulerToolOptionsBox::resetValues() {
m_Xfld->setValue(0);
m_Yfld->setValue(0);
m_Wfld->setValue(0);
m_Hfld->setValue(0);
m_Afld->setValue(0);
m_Lfld->setValue(0);
m_XpixelFld->setVisible(false);
m_YpixelFld->setVisible(false);
m_WpixelFld->setVisible(false);
m_HpixelFld->setVisible(false);
update();
}
//=============================================================================
//
// TapeToolOptionsBox
//
//=============================================================================
TapeToolOptionsBox::TapeToolOptionsBox(QWidget *parent, TTool *tool,
TPaletteHandle *pltHandle,
ToolHandle *toolHandle)
: ToolOptionsBox(parent)
, m_smoothMode(0)
, m_joinStrokesMode(0)
, m_toolMode(0)
, m_autocloseLabel(0)
, m_autocloseField(0) {
TPropertyGroup *props = tool->getProperties(0);
assert(props->getPropertyCount() > 0);
ToolOptionControlBuilder builder(this, tool, pltHandle, toolHandle);
if (tool && tool->getProperties(0)) tool->getProperties(0)->accept(builder);
hLayout()->addStretch(1);
if (!(tool->getTargetType() & TTool::Vectors)) return;
m_smoothMode = dynamic_cast<ToolOptionCheckbox *>(m_controls.value("Smooth"));
m_joinStrokesMode =
dynamic_cast<ToolOptionCheckbox *>(m_controls.value("JoinStrokes"));
m_toolMode = dynamic_cast<ToolOptionCombo *>(m_controls.value("Mode"));
m_typeMode = dynamic_cast<ToolOptionCombo *>(m_controls.value("Type"));
m_autocloseField =
dynamic_cast<ToolOptionSlider *>(m_controls.value("Distance"));
if (m_autocloseField)
m_autocloseLabel = m_labels.value(m_autocloseField->propertyName());
bool isNormalType = m_typeMode->currentText() == "Normal";
m_toolMode->setEnabled(isNormalType);
m_autocloseField->setEnabled(!isNormalType);
m_autocloseLabel->setEnabled(!isNormalType);
bool isLineToLineMode = m_toolMode->currentText() == "Line to Line";
m_joinStrokesMode->setEnabled(!isLineToLineMode);
bool isJoinStrokes = m_joinStrokesMode->isChecked();
m_smoothMode->setEnabled(!isLineToLineMode && isJoinStrokes);
bool ret = connect(m_typeMode, SIGNAL(currentIndexChanged(int)), this,
SLOT(onToolTypeChanged()));
ret = ret && connect(m_toolMode, SIGNAL(currentIndexChanged(int)), this,
SLOT(onToolModeChanged()));
ret = ret && connect(m_joinStrokesMode, SIGNAL(toggled(bool)), this,
SLOT(onJoinStrokesModeChanged()));
assert(ret);
}
//-----------------------------------------------------------------------------
void TapeToolOptionsBox::updateStatus() {
QMap<std::string, ToolOptionControl *>::iterator it;
for (it = m_controls.begin(); it != m_controls.end(); it++)
it.value()->updateStatus();
}
//-----------------------------------------------------------------------------
void TapeToolOptionsBox::onToolTypeChanged() {
bool isNormalType = m_typeMode->currentText() == "Normal";
m_toolMode->setEnabled(isNormalType);
m_autocloseField->setEnabled(!isNormalType);
m_autocloseLabel->setEnabled(!isNormalType);
}
//-----------------------------------------------------------------------------
void TapeToolOptionsBox::onToolModeChanged() {
bool isLineToLineMode = m_toolMode->currentText() == "Line to Line";
m_joinStrokesMode->setEnabled(!isLineToLineMode);
bool isJoinStrokes = m_joinStrokesMode->isChecked();
m_smoothMode->setEnabled(!isLineToLineMode && isJoinStrokes);
}
//-----------------------------------------------------------------------------
void TapeToolOptionsBox::onJoinStrokesModeChanged() {
bool isLineToLineMode = m_toolMode->currentText() == "Line to Line";
bool isJoinStrokes = m_joinStrokesMode->isChecked();
m_smoothMode->setEnabled(!isLineToLineMode && isJoinStrokes);
}
//=============================================================================
// RGBPickerToolOptions
//-----------------------------------------------------------------------------
//-----------------------------------------------------------------------------
/*! Label with background color
*/
class RGBLabel final : public QWidget {
QColor m_color;
public:
RGBLabel(QColor color, QWidget *parent) : QWidget(parent), m_color(color) {
setFixedSize(120, 20);
}
~RGBLabel() {}
void setColorAndUpdate(QColor color) {
if (m_color == color) return;
m_color = color;
update();
}
protected:
void paintEvent(QPaintEvent *pe) {
QPainter p(this);
p.setPen(Qt::NoPen);
// iwsw commented out temporarily
/*
if (Preferences::instance()->isDoColorCorrectionByUsing3DLutEnabled())
{
QColor convertedColor(m_color);
Ghibli3DLutConverter::instance()->convert(convertedColor);
p.setBrush(convertedColor);
}
else
*/
p.setBrush(m_color);
p.setBrush(m_color);
p.drawRect(rect());
// white text on dark color. black text on light color.
int val = m_color.red() * 30 + m_color.green() * 59 + m_color.blue() * 11;
if (val < 12800)
p.setPen(Qt::white);
else
p.setPen(Qt::black);
p.setBrush(Qt::NoBrush);
p.drawText(rect(), Qt::AlignCenter, QString("R:%1 G:%2 B:%3")
.arg(m_color.red())
.arg(m_color.green())
.arg(m_color.blue()));
}
};
//-----------------------------------------------------------------------------
RGBPickerToolOptionsBox::RGBPickerToolOptionsBox(
QWidget *parent, TTool *tool, TPaletteHandle *pltHandle,
ToolHandle *toolHandle, PaletteController *paletteController)
: ToolOptionsBox(parent) {
setFrameStyle(QFrame::StyledPanel);
setFixedHeight(26);
m_currentRGBLabel = new RGBLabel(QColor(128, 128, 128), this);
QAction *pickScreenAction =
CommandManager::instance()->getAction("A_ToolOption_PickScreen");
QPushButton *button = new QPushButton(tr("Pick Screen"));
button->setFixedHeight(20);
button->addAction(pickScreenAction);
connect(button, SIGNAL(clicked()), pickScreenAction, SLOT(trigger()));
TPropertyGroup *props = tool->getProperties(0);
assert(props->getPropertyCount() > 0);
ToolOptionControlBuilder builder(this, tool, pltHandle, toolHandle);
if (tool && tool->getProperties(0)) tool->getProperties(0)->accept(builder);
m_realTimePickMode =
dynamic_cast<ToolOptionCheckbox *>(m_controls.value("Passive Pick"));
m_layout->addWidget(m_currentRGBLabel, 0);
m_layout->addStretch(1);
m_layout->addWidget(button, 0); // new in 6.4
if (m_realTimePickMode) {
connect(m_realTimePickMode, SIGNAL(toggled(bool)), m_currentRGBLabel,
SLOT(setVisible(bool)));
m_currentRGBLabel->setVisible(m_realTimePickMode->isChecked());
}
// for passive pick
connect(paletteController, SIGNAL(colorPassivePicked(const QColor &)), this,
SLOT(updateRealTimePickLabel(const QColor &)));
}
//-----------------------------------------------------------------------------
void RGBPickerToolOptionsBox::updateStatus() {
QMap<std::string, ToolOptionControl *>::iterator it;
for (it = m_controls.begin(); it != m_controls.end(); it++)
it.value()->updateStatus();
}
//-----------------------------------------------------------------------------
void RGBPickerToolOptionsBox::updateRealTimePickLabel(const QColor &pix) {
if (isVisible()) m_currentRGBLabel->setColorAndUpdate(pix);
}
//=============================================================================
// StylePickerToolOptions
//-----------------------------------------------------------------------------
StylePickerToolOptionsBox::StylePickerToolOptionsBox(
QWidget *parent, TTool *tool, TPaletteHandle *pltHandle,
ToolHandle *toolHandle, PaletteController *paletteController)
: ToolOptionsBox(parent) {
setFrameStyle(QFrame::StyledPanel);
setFixedHeight(26);
m_currentStyleLabel = new QLabel(" - - - ", this);
m_currentStyleLabel->setObjectName("SytlePickerValue");
setStyleSheet(
"#SytlePickerValue {color: black; border:0px; background: "
"rgb(196,196,196);}");
m_currentStyleLabel->setFixedSize(200, 20);
m_currentStyleLabel->setAlignment(Qt::AlignCenter);
TPropertyGroup *props = tool->getProperties(0);
assert(props->getPropertyCount() > 0);
ToolOptionControlBuilder builder(this, tool, pltHandle, toolHandle);
if (tool && tool->getProperties(0)) tool->getProperties(0)->accept(builder);
m_realTimePickMode =
dynamic_cast<ToolOptionCheckbox *>(m_controls.value("Passive Pick"));
m_layout->addWidget(m_currentStyleLabel, 0);
m_layout->addStretch(1);
// retrieve the "organize palette" checkbox from the layout and insert
// into rightmost of the tool option bar
ToolOptionCheckbox *organizePaletteCB =
dynamic_cast<ToolOptionCheckbox *>(m_controls.value("Organize Palette"));
m_layout->removeWidget(organizePaletteCB);
m_layout->addWidget(new ToolOptionsBarSeparator(this), 0);
m_layout->addWidget(organizePaletteCB);
organizePaletteCB->setToolTip(
tr("With this option being activated, the picked style will be\nmoved to "
"the end of the first page of the palette."));
if (m_realTimePickMode) {
connect(m_realTimePickMode, SIGNAL(toggled(bool)), m_currentStyleLabel,
SLOT(setVisible(bool)));
m_currentStyleLabel->setVisible(m_realTimePickMode->isChecked());
}
// for passive pick
connect(paletteController,
SIGNAL(stylePassivePicked(const int, const int, const int)), this,
SLOT(updateRealTimePickLabel(const int, const int, const int)));
}
//-----------------------------------------------------------------------------
void StylePickerToolOptionsBox::updateStatus() {
QMap<std::string, ToolOptionControl *>::iterator it;
for (it = m_controls.begin(); it != m_controls.end(); it++)
it.value()->updateStatus();
}
//-----------------------------------------------------------------------------
void StylePickerToolOptionsBox::updateRealTimePickLabel(const int ink,
const int paint,
const int tone) {
if (isVisible()) {
if (ink < 0)
m_currentStyleLabel->setText(" - - - ");
else
m_currentStyleLabel->setText(QString("INK: #%1 PAINT: #%2 TONE: %3")
.arg(ink)
.arg(paint)
.arg(tone));
}
}
//=============================================================================
// ToolOptions
//-----------------------------------------------------------------------------
ToolOptions::ToolOptions() : m_panel(0) {
QHBoxLayout *mainLayout = new QHBoxLayout();
mainLayout->setMargin(0);
mainLayout->setSpacing(0);
setLayout(mainLayout);
}
//-----------------------------------------------------------------------------
ToolOptions::~ToolOptions() {}
//-----------------------------------------------------------------------------
void ToolOptions::showEvent(QShowEvent *) {
TTool::Application *app = TTool::getApplication();
ToolHandle *currTool = app->getCurrentTool();
if (currTool) {
onToolSwitched();
connect(currTool, SIGNAL(toolSwitched()), SLOT(onToolSwitched()));
connect(currTool, SIGNAL(toolChanged()), SLOT(onToolChanged()));
}
TObjectHandle *currObject = app->getCurrentObject();
if (currObject) {
onStageObjectChange();
connect(currObject, SIGNAL(objectSwitched()), SLOT(onStageObjectChange()));
connect(currObject, SIGNAL(objectChanged(bool)),
SLOT(onStageObjectChange()));
}
TXshLevelHandle *currLevel = app->getCurrentLevel();
if (currLevel)
connect(currLevel, SIGNAL(xshLevelSwitched(TXshLevel *)), this,
SLOT(onStageObjectChange()));
}
//-----------------------------------------------------------------------------
void ToolOptions::hideEvent(QShowEvent *) {
TTool::Application *app = TTool::getApplication();
ToolHandle *currTool = app->getCurrentTool();
if (currTool) currTool->disconnect(this);
TObjectHandle *currObject = app->getCurrentObject();
if (currObject) currObject->disconnect(this);
TXshLevelHandle *currLevel = app->getCurrentLevel();
if (currLevel) currLevel->disconnect(this);
}
//-----------------------------------------------------------------------------
void ToolOptions::onToolSwitched() {
if (m_panel) m_panel->hide();
m_panel = 0;
TTool::Application *app = TTool::getApplication();
// Quando i seguenti non serviranno piu', rimuovere gli header corrispondenti
// in cima, thx
TFrameHandle *currFrame = app->getCurrentFrame();
TObjectHandle *currObject = app->getCurrentObject();
TXsheetHandle *currXsheet = app->getCurrentXsheet();
TPaletteHandle *currPalette =
app->getPaletteController()->getCurrentLevelPalette();
ToolHandle *currTool = app->getCurrentTool();
TTool *tool = app->getCurrentTool()->getTool();
if (tool) {
// c'e' un tool corrente
ToolOptionsBox *panel = 0;
std::map<TTool *, ToolOptionsBox *>::iterator it = m_panels.find(tool);
if (it == m_panels.end()) {
// ... senza panel associato
if (tool->getName() == T_Edit) {
TPropertyGroup *pg = tool->getProperties(0);
panel = new ArrowToolOptionsBox(0, tool, pg, currFrame, currObject,
currXsheet, currTool);
} else if (tool->getName() == T_Selection)
panel = new SelectionToolOptionsBox(0, tool, currPalette, currTool);
else if (tool->getName() == T_Geometric)
panel = new GeometricToolOptionsBox(0, tool, currPalette, currTool);
else if (tool->getName() == T_Type)
panel = new TypeToolOptionsBox(0, tool, currPalette, currTool);
else if (tool->getName() == T_PaintBrush)
panel = new PaintbrushToolOptionsBox(0, tool, currPalette, currTool);
else if (tool->getName() == T_Fill)
panel = new FillToolOptionsBox(0, tool, currPalette, currTool);
else if (tool->getName() == T_Eraser)
panel = new EraserToolOptionsBox(0, tool, currPalette, currTool);
else if (tool->getName() == T_Tape)
panel = new TapeToolOptionsBox(0, tool, currPalette, currTool);
else if (tool->getName() == T_RGBPicker)
panel = new RGBPickerToolOptionsBox(0, tool, currPalette, currTool,
app->getPaletteController());
else if (tool->getName() == T_Ruler) {
RulerToolOptionsBox *p = new RulerToolOptionsBox(0, tool);
panel = p;
RulerTool *rt = dynamic_cast<RulerTool *>(tool);
if (rt) rt->setToolOptionsBox(p);
} else if (tool->getName() == T_StylePicker)
panel = new StylePickerToolOptionsBox(0, tool, currPalette, currTool,
app->getPaletteController());
else
panel = tool->createOptionsBox(); // Only this line should remain out
// of that if/else monstrosity
/* DANIELE: Regola per il futuro - NON FARE PIU' COME SOPRA.
Bisogna cominciare a collegare il metodo virtuale
createOptionsBox() di ogni tool.
Chi ha tempo si adoperi un pochino per normalizzare
la situazione anche per i tool sopra, plz - basta spostare
un po' di codice... */
m_panels[tool] = panel;
layout()->addWidget(panel);
emit newPanelCreated();
} else {
// il panel c'e' gia'.
panel = it->second;
panel->updateStatus();
}
m_panel = panel;
m_panel->show();
} else {
// niente tool
}
}
//-----------------------------------------------------------------------------
void ToolOptions::onToolChanged() {
assert(m_panel);
ToolOptionsBox *optionBox = dynamic_cast<ToolOptionsBox *>(m_panel);
assert(optionBox);
optionBox->updateStatus();
}
//-----------------------------------------------------------------------------
void ToolOptions::onStageObjectChange() {
TTool *tool = TTool::getApplication()->getCurrentTool()->getTool();
if (!tool) return;
std::map<TTool *, ToolOptionsBox *>::iterator it = m_panels.find(tool);
if (it == m_panels.end()) return;
ToolOptionsBox *panel = it->second;
panel->onStageObjectChange();
}