<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.0" language="zh_CN">
<context>
    <name>Preferences</name>
    <message>
        <source>Retas Level Format</source>
        <translation>RETAS 层级格式</translation>
    </message>
</context>
<context>
    <name>QObject</name>
    <message>
        <source>No restrictions for uncompressed avi video</source>
        <translation>非压缩 AVI 视频没有限制</translation>
    </message>
    <message>
        <source>video width must be a multiple of %1</source>
        <translation>视频宽度必须是 %1 的倍数</translation>
    </message>
    <message>
        <source>video lenght must be a multiple of %1</source>
        <translation>视频长度必须是 %1 的倍数</translation>
    </message>
    <message>
        <source>No restrictions for this codec</source>
        <translation>该编码没限制</translation>
    </message>
    <message>
        <source>Resolution restrictions:</source>
        <translation>分辨率限制：</translation>
    </message>
    <message>
        <source>It is not possible to communicate with the codec.
 Probably the codec cannot work correctly.</source>
        <translation>未能和编码器通讯。
可能是该编码器不能正确运行。</translation>
    </message>
    <message>
        <source>%1-%2</source>
        <translation></translation>
    </message>
    <message>
        <source>%1</source>
        <translation></translation>
    </message>
    <message>
        <source>Expected %1 argument(s) in %2, got %3</source>
        <translation>在 %2 中期待 %1 参数，实际有 %3</translation>
    </message>
    <message>
        <source>%1 is not a valid color (valid color names are &apos;red&apos;, &apos;transparent&apos;, &apos;#FF8800&apos;, ecc.)</source>
        <translation>%1 不是有效的颜色（有效的颜色名是类似：&apos;red&apos;, &apos;transparent&apos;, &apos;#FF8800&apos; 等等）</translation>
    </message>
    <message>
        <source>Vectorization failed</source>
        <translation>矢量化失败</translation>
    </message>
    <message>
        <source>Argument doesn&apos;t look like a file path : %1</source>
        <translation>参数看着不像文件路径：%1</translation>
    </message>
    <message>
        <source>Bad argument (%1): should be an Image (not empty)</source>
        <translation>不正确的参数（%1）：应当是非空的图像</translation>
    </message>
    <message>
        <source>Argument &apos;%1&apos; does not look like a FrameId</source>
        <translation>参数 &apos;%1&apos;不像帧 ID</translation>
    </message>
    <message>
        <source>First argument must be a scene : %1</source>
        <translation>第1个参数必须是场景：%1</translation>
    </message>
    <message>
        <source>Can&apos;t render empty scene</source>
        <translation>不能渲染空场景</translation>
    </message>
    <message>
        <source>New Camera  %1</source>
        <translation>新相机  %1</translation>
    </message>
    <message>
        <source>New Pegbar  %1</source>
        <translation>新定位尺  %1</translation>
    </message>
    <message>
        <source>Set Active Camera  %1 &gt; %2</source>
        <translation>设定激活的相机  %1 &gt; %2</translation>
    </message>
    <message>
        <source>Remove Spline  %1</source>
        <translation>移除样条线  %1</translation>
    </message>
    <message>
        <source>New Motion Path  %1</source>
        <translation>新建移动路径  %1</translation>
    </message>
    <message>
        <source>Link Motion Path  %1 &gt; %2</source>
        <translation>链接运动路径  %1 &gt; %2</translation>
    </message>
    <message>
        <source>Remove Object  %1</source>
        <translation>移除物件  %1</translation>
    </message>
    <message>
        <source>Remove Column  </source>
        <translation>移除列</translation>
    </message>
    <message>
        <source>Load into Current Palette  &gt; %1</source>
        <translation>加载到读取调色板  &gt; %1</translation>
    </message>
    <message>
        <source>Replace with Current Palette  &gt; %1</source>
        <translation>用当前调色板替换  &gt; %1</translation>
    </message>
    <message>
        <source>Delete Studio Palette  : %1</source>
        <translation>删除工作室调色板  : %1</translation>
    </message>
    <message>
        <source>Create Studio Palette  : %1</source>
        <translation>创建工作室调色板  : %1</translation>
    </message>
    <message>
        <source>Delete Studio Palette Folder  : %1</source>
        <translation>删除工作室调色板文件夹  : %1</translation>
    </message>
    <message>
        <source>Create Studio Palette Folder  : %1</source>
        <translation>创建工作室调色板文件夹  : %1</translation>
    </message>
    <message>
        <source>Move Studio Palette Folder  : %1 : %2 &gt; %3</source>
        <translation>移动工作室调色板文件夹  : %1 : %2 &gt; %3</translation>
    </message>
    <message>
        <source>Arrange Styles  in Palette %1</source>
        <translation>在调色板 %1安排样式</translation>
    </message>
    <message>
        <source>Create Style#%1  in Palette %2</source>
        <translation>在调色板 %2中创建样式#%1</translation>
    </message>
    <message>
        <source>Add Style  to Palette %1</source>
        <translation>添加样式到调色板 %1</translation>
    </message>
    <message>
        <source>Add Page %1 to Palette %2</source>
        <translation>添加页 %1 到调色板 %2</translation>
    </message>
    <message>
        <source>Delete Page %1 from Palette %2</source>
        <translation>从调色板 %2 中删除页 %1</translation>
    </message>
    <message>
        <source>Load Color Model %1  to Palette %2</source>
        <translation>加载色彩模型 %1 到调色板 %2</translation>
    </message>
    <message>
        <source>Move Page</source>
        <translation>移动页</translation>
    </message>
    <message>
        <source>Rename Page  %1 &gt; %2</source>
        <translation>重命名页  %1 &gt; %2</translation>
    </message>
    <message>
        <source>Rename Style#%1 in Palette%2  : %3 &gt; %4</source>
        <translation>重命名调色板 %2 的样式#%1  : %3 &gt; %4</translation>
    </message>
    <message>
        <source>Add Fx  : </source>
        <translation>添加特效  : </translation>
    </message>
    <message>
        <source>Insert Fx  : </source>
        <translation>插入特效  : </translation>
    </message>
    <message>
        <source>Create Linked Fx  : %1</source>
        <translation>创建链接的特效  : %1</translation>
    </message>
    <message>
        <source>Replace Fx  : </source>
        <translation>替换特效  : </translation>
    </message>
    <message>
        <source>Unlink Fx  : %1 - - %2</source>
        <translation>解除特效链接  : %1 - - %2</translation>
    </message>
    <message>
        <source>Make Macro Fx  : %1</source>
        <translation>制作宏特效  : %1</translation>
    </message>
    <message>
        <source>Explode Macro Fx  : %1</source>
        <translation>展开宏特效  : %1</translation>
    </message>
    <message>
        <source>Create Output Fx</source>
        <translation>创建输出特效</translation>
    </message>
    <message>
        <source>Connect to Xsheet  : </source>
        <translation>联接到摄影表  : </translation>
    </message>
    <message>
        <source>Disconnect from Xsheet  : </source>
        <translation>解除摄影表链接 : </translation>
    </message>
    <message>
        <source>Delete Link</source>
        <translation>删除链接</translation>
    </message>
    <message>
        <source>Delete Fx Node : %1</source>
        <translation>删除特效节点 : %1</translation>
    </message>
    <message>
        <source>Paste Fx  :  </source>
        <translation>粘贴特效 : </translation>
    </message>
    <message>
        <source>Disconnect Fx</source>
        <translation>解除特效链接</translation>
    </message>
    <message>
        <source>Connect Fx : %1 - %2</source>
        <translation>联接特效 : %1 - %2</translation>
    </message>
    <message>
        <source>Rename Fx : %1 &gt; %2</source>
        <translation>重命名特效 : %1 &gt; %2</translation>
    </message>
    <message>
        <source>Group Fx</source>
        <translation>群组特效</translation>
    </message>
    <message>
        <source>Ungroup Fx</source>
        <translation>解组特效</translation>
    </message>
    <message>
        <source>Rename Group  : %1 &gt; %2</source>
        <translation>重命名组  : %1 &gt; %2</translation>
    </message>
    <message>
        <source>Set Keyframe</source>
        <translation>设定关键帧</translation>
    </message>
    <message>
        <source>Remove Keyframe</source>
        <translation>移除关键帧</translation>
    </message>
    <message>
        <source>Cycle</source>
        <translation>循环</translation>
    </message>
    <message>
        <source>The autocentering failed on the current drawing.</source>
        <translation>在当前绘图上的自动定位中点失败。</translation>
    </message>
    <message>
        <source>Move</source>
        <translation>移动</translation>
    </message>
    <message>
        <source>Edit Rotation</source>
        <translation>编辑旋转</translation>
    </message>
    <message>
        <source>Move E/W</source>
        <translation>左右移动</translation>
    </message>
    <message>
        <source>Move N/S</source>
        <translation>上下移动</translation>
    </message>
    <message>
        <source>Move Z</source>
        <translation>Z轴移动</translation>
    </message>
    <message>
        <source>Edit Stack Order</source>
        <translation>编辑堆栈顺序</translation>
    </message>
    <message>
        <source>Edit Scale W</source>
        <translation>编辑横向缩放</translation>
    </message>
    <message>
        <source>Edit Scale H</source>
        <translation>编辑纵向缩放</translation>
    </message>
    <message>
        <source>Edit Scale</source>
        <translation>编辑缩放</translation>
    </message>
    <message>
        <source>Edit PosPath</source>
        <translation>编辑位置路径</translation>
    </message>
    <message>
        <source>Edit Shear X</source>
        <translation>编辑横向切变</translation>
    </message>
    <message>
        <source>Edit Shear Y</source>
        <translation>编辑纵向切变</translation>
    </message>
    <message>
        <source>%1  %2  Frame : %3</source>
        <translation>%1  %2  帧 : %3</translation>
    </message>
    <message>
        <source>Set Keyframe   %1 at frame %2</source>
        <translation>设定关键帧   %1  在帧 %2</translation>
    </message>
    <message>
        <source>Remove Keyframe   %1 at frame %2</source>
        <translation>移除关键帧   %1  在帧 %2</translation>
    </message>
    <message>
        <source>Move Center   %1  Frame %2</source>
        <translation>移动中心   %1  帧 %2</translation>
    </message>
</context>
<context>
    <name>TScriptBinding::CenterlineVectorizer</name>
    <message>
        <source>Can&apos;t vectorize a %1 level</source>
        <translation>不能矢量化层级 %1</translation>
    </message>
    <message>
        <source>Can&apos;t vectorize a level with no frames</source>
        <translation>不能矢量化没有帧的层级</translation>
    </message>
    <message>
        <source>Can&apos;t vectorize a %1 image</source>
        <translation>不能参数化图像 %1</translation>
    </message>
    <message>
        <source>Bad argument (%1): should be an Image or a Level</source>
        <translation>不正确的参数 (%1)：应当是一个图像或层级</translation>
    </message>
</context>
<context>
    <name>TScriptBinding::FilePath</name>
    <message>
        <source>&quot;%1&quot;</source>
        <translation>&quot;%1&quot;</translation>
    </message>
    <message>
        <source>can&apos;t concatenate an absolute path : %1</source>
        <translation>不能衔接绝对路径：%1</translation>
    </message>
    <message>
        <source>%1 is not a directory</source>
        <translation>%1 不是目录</translation>
    </message>
    <message>
        <source>can&apos;t read directory %1</source>
        <translation>不能读取目录 %1</translation>
    </message>
</context>
<context>
    <name>TScriptBinding::Image</name>
    <message>
        <source>File %1 doesn&apos;t exist</source>
        <translation>文件 %1 不存在</translation>
    </message>
    <message>
        <source>Loaded first frame of %1</source>
        <translation>%1 的第一帧已经加载</translation>
    </message>
    <message>
        <source>Unexpected error while reading image</source>
        <translation>读取图像时发生了意想不到的错误</translation>
    </message>
    <message>
        <source>Unrecognized file type :</source>
        <translation>不可识别的文件类型：</translation>
    </message>
    <message>
        <source>Can&apos;t save a %1 image to this file type : %2</source>
        <translation>不能保存图像 %1 为这个文件类型：%2</translation>
    </message>
    <message>
        <source>Unexpected error while writing image</source>
        <translation>写入图像时发生了意想不到的错误</translation>
    </message>
</context>
<context>
    <name>TScriptBinding::ImageBuilder</name>
    <message>
        <source>Bad argument (%1): should be &apos;Raster&apos; or ToonzRaster&apos;</source>
        <translation>不正确的参数 (%1)：应当是“光栅”或者“Toonz光栅”</translation>
    </message>
    <message>
        <source>ImageBuilder(%1 image)</source>
        <translation>图像构建器（%1 图像）</translation>
    </message>
    <message>
        <source>%1 : %2</source>
        <translation>%1 : %2</translation>
    </message>
    <message>
        <source>Bad argument (%1): should be a Transformation</source>
        <translation>不正确的参数 (%1)：应当是几何变换</translation>
    </message>
</context>
<context>
    <name>TScriptBinding::Level</name>
    <message>
        <source>%1 frames</source>
        <translation>%1 帧</translation>
    </message>
    <message>
        <source>Bad argument (%1). It should be FilePath or string</source>
        <translation>不正确的参数 (%1)：应当是文件路径或者字符串</translation>
    </message>
    <message>
        <source>Exception loading level (%1)</source>
        <translation>加载层级时的例外 (%1)</translation>
    </message>
    <message>
        <source>File %1 doesn&apos;t exist</source>
        <translation>文件 %1 不存在</translation>
    </message>
    <message>
        <source>File %1 is unsupported</source>
        <translation>文件 %1 是不支持的</translation>
    </message>
    <message>
        <source>Exception reading %1</source>
        <translation>%1 读取时的例外</translation>
    </message>
    <message>
        <source>Can&apos;t save an empty level</source>
        <translation>不能保存空层级</translation>
    </message>
    <message>
        <source>Unrecognized file type :</source>
        <translation>不可识别的文件类型：</translation>
    </message>
    <message>
        <source>Can&apos;t save a %1 level to this file type : %2</source>
        <translation>不能保存层级 %1 为此文件类型：%2</translation>
    </message>
    <message>
        <source>Exception writing %1</source>
        <translation>%1 写入是的例外</translation>
    </message>
    <message>
        <source>frame index (%1) must be a number</source>
        <translation>帧索引 (%1) 必须是个数字</translation>
    </message>
    <message>
        <source>frame index (%1) is out of range (0-%2)</source>
        <translation>帧索引 (%1) 超出范围了 (0-%2)</translation>
    </message>
    <message>
        <source>second argument (%1) is not an image</source>
        <translation>第2个参数 (%1) 不是图像</translation>
    </message>
    <message>
        <source>can not insert a %1 image into a level</source>
        <translation>不能插入图像 %1 到层级中</translation>
    </message>
    <message>
        <source>can not insert a %1 image to a %2 level</source>
        <translation>不能插入图像 %1 到层级 %2 中</translation>
    </message>
</context>
<context>
    <name>TScriptBinding::OutlineVectorizer</name>
    <message>
        <source>Can&apos;t vectorize a %1 level</source>
        <translation>不能矢量化层级 %1</translation>
    </message>
    <message>
        <source>Can&apos;t vectorize a level with no frames</source>
        <translation>不能矢量化没有帧的层级</translation>
    </message>
    <message>
        <source>Can&apos;t vectorize a %1 image</source>
        <translation>不能矢量化图像 %1</translation>
    </message>
    <message>
        <source>Bad argument (%1): should be an Image or a Level</source>
        <translation>不正确的参数 (%1)：应当是图像或者层级</translation>
    </message>
    <message>
        <source>Invalid color : </source>
        <translation>无效的颜色：</translation>
    </message>
</context>
<context>
    <name>TScriptBinding::Rasterizer</name>
    <message>
        <source>Expected a vector image: %1</source>
        <translation>预期的矢量图像：%1</translation>
    </message>
    <message>
        <source>Expected a vector level: %1</source>
        <translation>预期的矢量层级：%1</translation>
    </message>
    <message>
        <source>Argument must be a vector level or image : </source>
        <translation>参数必须是矢量层级或图像：</translation>
    </message>
    <message>
        <source>%1 has no palette</source>
        <translation>%1 没有调色板</translation>
    </message>
</context>
<context>
    <name>TScriptBinding::Scene</name>
    <message>
        <source>File %1 doesn&apos;t exist</source>
        <translation>文件 %1 不存在</translation>
    </message>
    <message>
        <source>Exception reading %1</source>
        <translation>%1 读取时的例外</translation>
    </message>
    <message>
        <source>Exception writing %1</source>
        <translation>%1 写入时的例外</translation>
    </message>
    <message>
        <source>Bad level type (%1): must be Vector,Raster or ToonzRaster</source>
        <translation>不正确的层级类型 (%1)：必须是矢量，光栅或者 Toonz 光栅</translation>
    </message>
    <message>
        <source>Can&apos;t add the level: name(%1) is already used</source>
        <translation>不能添加层级：名字 (%1) 已被用</translation>
    </message>
    <message>
        <source>Can&apos;t load this kind of file as a level : %1</source>
        <translation>不能加载此类文件作为层级：%1</translation>
    </message>
    <message>
        <source>Could not load level %1</source>
        <translation>不能加载层级 %1</translation>
    </message>
    <message>
        <source>Level is not included in the scene : %1</source>
        <translation>层级不在场景：%1 中</translation>
    </message>
    <message>
        <source>%1 : Expected a Level instance or a level name</source>
        <translation>%1：预期层级矢量或者层级名</translation>
    </message>
    <message>
        <source>Level &apos;%1&apos; is not included in the scene</source>
        <translation>层级 &apos;%1&apos; 没有在这个场景中</translation>
    </message>
</context>
<context>
    <name>TScriptBinding::ToonzRasterConverter</name>
    <message>
        <source>Can&apos;t convert a %1 level</source>
        <translation>不能转换层级 %1</translation>
    </message>
    <message>
        <source>Can&apos;t convert a level with no frames</source>
        <translation>不能转换没有帧的层级</translation>
    </message>
    <message>
        <source>Can&apos;t convert a %1 image</source>
        <translation>不能转换图像 %1</translation>
    </message>
    <message>
        <source>Bad argument (%1): should be a raster Level or a raster Image</source>
        <translation>不正确的参数 (%1)：应当是光栅层级或者光栅图像</translation>
    </message>
</context>
<context>
    <name>TScriptBinding::Transform</name>
    <message>
        <source>Identity</source>
        <translation>标识</translation>
    </message>
    <message>
        <source>Translation(%1,%2)</source>
        <translation>移动（%1，%2）</translation>
    </message>
    <message>
        <source>Rotation(%1)</source>
        <translation>旋转（%1）</translation>
    </message>
    <message>
        <source>Scale(%1%)</source>
        <translation>缩放（%1%）</translation>
    </message>
    <message>
        <source>Scale(%1%, %2%)</source>
        <translation>缩放（%1%，%2%）</translation>
    </message>
    <message>
        <source>Transform(%1, %2, %3;  %4, %5, %6)</source>
        <translation>几何变换（%1，%2，%3；  %4，%5，%6）</translation>
    </message>
</context>
</TS>