#include "tcenterlinevectP.h"
//==========================================================================
//*********************************
// Skeleton re-organization
//*********************************
//==========================================================================
//----------------------------------------
// Skeleton re-organization Globals
//----------------------------------------
namespace {
VectorizerCoreGlobals *globals;
std::vector<unsigned int> contourFamilyOfOrganized;
JointSequenceGraph *currJSGraph;
ContourFamily *currContourFamily;
};
//==========================================================================
//--------------------------------------
// Skeleton re-organization
//--------------------------------------
// EXPLANATION: The raw skeleton data obtained from StraightSkeletonizer
// class need to be grouped in joints and sequences before proceding with
// conversion in quadratics - which works on single sequences.
// NOTE: Due to maxHeight, we have to assume that a single SkeletonGraph can
// hold
// more connected graphs at once.
// a) Isolate graph-like part of skeleton
// b) Retrieve remaining single sequences.
typedef std::map<UINT, UINT, std::less<UINT>> uintMap;
// void organizeGraphs(SkeletonList* skeleton)
void organizeGraphs(SkeletonList *skeleton, VectorizerCoreGlobals &g) {
globals = &g;
SkeletonList::iterator currGraphPtr;
Sequence currSequence;
uintMap jointsMap;
UINT i, j;
UINT counter = 0; // We also count current graph number, to associate
// organized graphs to their contour family
contourFamilyOfOrganized.clear();
for (currGraphPtr = skeleton->begin(); currGraphPtr != skeleton->end();
++currGraphPtr) {
SkeletonGraph &currGraph = **currGraphPtr;
currSequence.m_graphHolder = &currGraph;
// Separate single Points - can happen only when a single node gets stored
// in a SkeletonGraph.
if (currGraph.getNodesCount() == 1) {
globals->singlePoints.push_back(*currGraph.getNode(0));
++counter;
continue;
}
// Discriminate between graphs, two-endpoint single sequences, and circular
// ones
bool has1DegreePoint = 0;
for (i = 0; i < currGraph.getNodesCount(); ++i)
if (currGraph.getNode(i).degree() != 2)
if (currGraph.getNode(i).degree() == 1)
has1DegreePoint = 1;
else
goto _graph;
if (has1DegreePoint)
goto _two_endpoint;
else
goto _circulars;
_two_endpoint : {
// Find head
for (i = 0; currGraph.getNode(i).degree() != 1; ++i)
;
currSequence.m_head = i;
currSequence.m_headLink = 0;
// Find tail
for (++i;
i < currGraph.getNodesCount() && currGraph.getNode(i).degree() == 2;
++i)
;
currSequence.m_tail = i;
currSequence.m_tailLink = 0;
globals->singleSequences.push_back(currSequence);
++counter;
continue;
}
_graph : {
// Organize Graph-like part
globals->organizedGraphs.push_back(JointSequenceGraph());
JointSequenceGraph &JSGraph = globals->organizedGraphs.back();
contourFamilyOfOrganized.push_back(counter);
jointsMap.clear();
// Gather all sequence extremities
for (i = 0; i < currGraph.getNodesCount(); ++i) {
if (currGraph.getNode(i).degree() != 2) {
j = JSGraph.newNode(i);
// Using a map to keep one-to-one relation between j and i
jointsMap.insert(uintMap::value_type(i, j));
}
}
// Extract Sequences
for (i = 0; i < JSGraph.getNodesCount(); ++i) {
UINT joint = *JSGraph.getNode(i);
for (j = 0; j < currGraph.getNode(joint).getLinksCount(); ++j) {
currSequence.m_head = joint;
currSequence.m_headLink = j;
// Seek tail
UINT oldNode = joint,
thisNode = currGraph.getNode(joint).getLink(j).getNext();
while (currGraph.getNode(thisNode).degree() == 2) {
currGraph.node(thisNode).setAttribute(
ORGANIZEGRAPHS_SIGN); // Sign thisNode as part of a JSGraph
currSequence.advance(oldNode, thisNode);
}
currSequence.m_tail = thisNode;
currSequence.m_tailLink =
currGraph.getNode(thisNode).linkOfNode(oldNode);
JSGraph.newLink(i, jointsMap.find(thisNode)->second, currSequence);
}
}
}
// NOTE: The following may seem uncommon - you must observe that, *WHEN
// maxThickness<INF*,
// more isolated sequence groups may arise in the SAME SkeletonGraph; so,
// an organized
// graph may contain different unconnected basic graph-structures.
// Further, remaining circular sequences may still exist. Therefore:
// Proceed with remaining circulars extraction
_circulars : {
// Extract all circular sequences
// Find a sequence point
for (i = 0; i < currGraph.getNodesCount(); ++i) {
if (!currGraph.getNode(i).hasAttribute(ORGANIZEGRAPHS_SIGN) &&
currGraph.getNode(i).degree() == 2) {
unsigned int curr = i, currLink = 0;
currSequence.next(curr, currLink);
for (; curr != i; currSequence.next(curr, currLink))
currGraph.node(curr).setAttribute(ORGANIZEGRAPHS_SIGN);
// Add sequence
currSequence.m_head = currSequence.m_tail = i;
currSequence.m_headLink = 0;
currSequence.m_tailLink = 1;
globals->singleSequences.push_back(currSequence);
}
}
}
}
}
//==========================================================================
//******************************
// Junction Recovery
//******************************
// EXPLANATION: Junction recovery attempts to reshape skeleton junctions when
// possible. The original polygons shape must not be exceedingly broken, and
// no visible shape alteration must found.
// WARNING: Currently not working together with
// globals->currConfig->m_maxThickness<INF.
//--------------------------------------------------------------------------
//------------------
// Globals
//------------------
namespace {
const double roadsMaxSlope = 0.3;
const double shapeDistMul = 1;
const double hDiffMul = 0.3;
const double lineDistMul = 1;
const double pullBackMul = 0.2;
}
//--------------------------------------------------------------------------
//-------------------------
// Roads Extraction
//-------------------------
// SMALL ISSUE: The following is currently done for both side
// of a sequence...
inline void findRoads(const Sequence &s) {
unsigned int curr, currLink, next;
unsigned int roadStart, roadStartLink;
double d, hMax, length;
bool lowSlope, roadOn = 0;
curr = s.m_head;
currLink = s.m_headLink;
for (; curr != s.m_tail; s.next(curr, currLink)) {
next = s.m_graphHolder->getNode(curr).getLink(currLink).getNext();
d = planeDistance(*s.m_graphHolder->getNode(curr),
*s.m_graphHolder->getNode(next));
lowSlope =
fabs(s.m_graphHolder->getNode(curr).getLink(currLink)->getSlope()) <
roadsMaxSlope
? 1
: 0;
// Entering event in a *possibile* road axis
if (!roadOn && lowSlope) {
length = 0;
hMax = s.m_graphHolder->getNode(curr)->z;
roadStart = curr;
roadStartLink = currLink;
}
// Exit event from a """
else if (roadOn && !lowSlope && (length > hMax))
// Then sign ROAD the sequence from roadStart to curr.
for (; roadStart != curr; s.next(roadStart, roadStartLink))
s.m_graphHolder->node(roadStart)
.link(roadStartLink)
->setAttribute(SkeletonArc::ROAD);
// Now update vars
if (lowSlope) {
length += d;
if (hMax < s.m_graphHolder->getNode(next)->z)
hMax = s.m_graphHolder->getNode(next)->z;
}
roadOn = lowSlope;
}
// At sequence end, force an exit event
if (roadOn && (length > hMax))
for (; roadStart != curr; s.next(roadStart, roadStartLink))
s.m_graphHolder->node(roadStart)
.link(roadStartLink)
->setAttribute(SkeletonArc::ROAD);
}
//--------------------------------------------------------------------------
// Find the 'roads' of the current Graph.
void findRoads(const JointSequenceGraph &JSGraph) {
unsigned int i, j;
// For all Sequence of currGraph, extract roads
for (i = 0; i < JSGraph.getNodesCount(); ++i) {
for (j = 0; j < JSGraph.getNode(i).getLinksCount(); ++j)
// if(JSGraph.getNode(i).getLink(j)->isForward())
findRoads(*JSGraph.getNode(i).getLink(j));
}
}
//--------------------------------------------------------------------------
//----------------------------------
// Junction Recovery Classes
//----------------------------------
// Entering point of a Sequence inside a Junction Area
class EnteringSequence final : public Sequence {
public:
TPointD m_direction; // In this case, we keep
double m_height; // separated (x,y) and z coords.
// Also store indices toward the next (outer) joint
unsigned int m_initialJoint;
unsigned int m_outerLink;
EnteringSequence() {}
EnteringSequence(const Sequence &s) : Sequence(s) {}
};
//--------------------------------------------------------------------------
class JunctionArea {
public:
std::vector<EnteringSequence> m_enteringSequences;
std::vector<unsigned int> m_jointsAbsorbed;
TPointD m_newJointPosition;
JunctionArea() {}
// Initialize Junction Area
void expandArea(unsigned int initial);
// Calculate and evaluate area
bool checkShape();
bool solveJunctionPosition();
bool makeHeights();
bool calculateReconstruction();
// Substitute area over old configuration
bool sequencesPullBack();
void apply();
};
//--------------------------------------------------------------------------
//----------------------------
// Expansion Procedure
//----------------------------
// Junction Area expansion procedure
inline void JunctionArea::expandArea(unsigned int initial) {
unsigned int a;
unsigned int curr, currLink;
unsigned int i, iLink, iNext;
m_jointsAbsorbed.push_back(initial);
currJSGraph->node(initial).setAttribute(
JointSequenceGraph::REACHED); // Nodes absorbed gets signed
for (a = 0; a < m_jointsAbsorbed.size(); ++a) {
// Extract a joint from vector
curr = m_jointsAbsorbed[a];
for (currLink = 0; currLink < currJSGraph->getNode(curr).getLinksCount();
++currLink) {
Sequence &s = *currJSGraph->node(curr).link(currLink);
if (s.m_graphHolder->getNode(s.m_head)
.getLink(s.m_headLink)
.getAccess()) {
// Expand into all nearby sequences, until a ROAD is found
i = s.m_head;
iLink = s.m_headLink;
for (; i != s.m_tail &&
!s.m_graphHolder->getNode(i).getLink(iLink)->hasAttribute(
SkeletonArc::ROAD);
s.next(i, iLink))
;
// If the sequence has been completely run, include next joint in the
// expansion procedure AND sign it as 'REACHED'
if (i == s.m_tail) {
iNext = currJSGraph->getNode(curr).getLink(currLink).getNext();
if (!currJSGraph->node(iNext).hasAttribute(
JointSequenceGraph::REACHED)) {
currJSGraph->node(iNext).setAttribute(JointSequenceGraph::REACHED);
m_jointsAbsorbed.push_back(iNext);
}
// Negate access to this sequence
s.m_graphHolder->node(s.m_tail).link(s.m_tailLink).setAccess(0);
s.m_graphHolder->node(s.m_head).link(s.m_headLink).setAccess(0);
} else {
// Initialize and copy the entering sequence found
m_enteringSequences.push_back(EnteringSequence(s));
m_enteringSequences.back().m_head = i;
m_enteringSequences.back().m_headLink = iLink;
// Initialize entering directions
iNext = s.m_graphHolder->getNode(i).getLink(iLink).getNext();
m_enteringSequences.back().m_direction = planeProjection(
*s.m_graphHolder->getNode(i) - *s.m_graphHolder->getNode(iNext));
m_enteringSequences.back().m_direction =
m_enteringSequences.back().m_direction *
(1 / norm(m_enteringSequences.back().m_direction));
// Initialize entering height / slope
m_enteringSequences.back().m_height = s.m_graphHolder->getNode(i)->z;
// Also store pointer to link toward the joint at the end of sequence
m_enteringSequences.back().m_initialJoint = curr;
m_enteringSequences.back().m_outerLink = currLink;
}
}
}
}
}
//--------------------------------------------------------------------------
//-----------------------
// Area Shape Test
//-----------------------
inline bool JunctionArea::checkShape() {
std::vector<EnteringSequence>::iterator a, b;
unsigned int node, contour, first, last, n;
TPointD A, A1, B, B1, P, P1;
bool result = 1;
// First, sign all outgoing arcs' m_leftGeneratingNode as end of
// control procedure
for (a = m_enteringSequences.begin(); a != m_enteringSequences.end(); ++a) {
node = a->m_graphHolder->getNode(a->m_head)
.getLink(a->m_headLink)
->getLeftGenerator();
contour = a->m_graphHolder->getNode(a->m_head)
.getLink(a->m_headLink)
->getLeftContour();
(*currContourFamily)[contour][node].setAttribute(ContourNode::JR_RESERVED);
}
// Now, check shape
for (a = m_enteringSequences.begin(), b = m_enteringSequences.end() - 1;
a != m_enteringSequences.end(); b = a, ++a) {
// Initialize contour check
first = a->m_graphHolder->getNode(a->m_head)
.getLink(a->m_headLink)
->getRightGenerator();
// last= b->m_graphHolder->getNode(b->m_head).getLink(b->m_headLink)
// ->getLeftGenerator();
contour = a->m_graphHolder->getNode(a->m_head)
.getLink(a->m_headLink)
->getRightContour();
n = (*currContourFamily)[contour].size();
// Better this effective way to find the last
unsigned int numChecked = 0;
for (last = first; !(*currContourFamily)[contour][last].hasAttribute(
ContourNode::JR_RESERVED) &&
numChecked < n;
last = (last + 1) % n, ++numChecked)
;
// Security check
if (numChecked == n) return 0;
A = planeProjection((*currContourFamily)[contour][first].m_position);
A1 = planeProjection(
(*currContourFamily)[contour][(first + 1) % n].m_position);
B = planeProjection((*currContourFamily)[contour][last].m_position);
B1 = planeProjection(
(*currContourFamily)[contour][(last + 1) % n].m_position);
for (node = first; !(*currContourFamily)[contour][node].hasAttribute(
ContourNode::JR_RESERVED);
node = (node + 1) % n) {
P = planeProjection((*currContourFamily)[contour][node].m_position);
P1 = planeProjection(
(*currContourFamily)[contour][(node + 1) % n].m_position);
// EXPLANATION:
// Segment P-P1 must be included in fat lines passing for A-A1 or B-B1
result &=
(fabs(cross(P - A, normalize(A1 - A))) < a->m_height * shapeDistMul &&
fabs(cross(P1 - A, normalize(A1 - A))) < a->m_height * shapeDistMul)
||
(fabs(cross(P - B, normalize(B1 - B))) < b->m_height * shapeDistMul &&
fabs(cross(P1 - B, normalize(B1 - B))) < b->m_height * shapeDistMul);
}
}
// Finally, restore nodes attributes
for (a = m_enteringSequences.begin(); a != m_enteringSequences.end(); ++a) {
node = a->m_graphHolder->getNode(a->m_head)
.getLink(a->m_headLink)
->getLeftGenerator();
contour = a->m_graphHolder->getNode(a->m_head)
.getLink(a->m_headLink)
->getLeftContour();
(*currContourFamily)[contour][node].clearAttribute(
ContourNode::JR_RESERVED);
}
return result;
}
//--------------------------------------------------------------------------
//--------------------------------------------
// Solve new junction position problem
//--------------------------------------------
inline bool JunctionArea::solveJunctionPosition() {
std::vector<EnteringSequence>::iterator a;
double Sx2 = 0, Sy2 = 0, Sxy = 0;
TPointD P, v, b;
double h;
// Build preliminary sums for the linear system
for (a = m_enteringSequences.begin(); a != m_enteringSequences.end(); ++a) {
h = a->m_height;
v = a->m_direction;
P = planeProjection(*a->m_graphHolder->getNode(a->m_head));
// Height-weighted problem
Sx2 += sq(v.x) * h;
Sy2 += sq(v.y) * h;
Sxy += v.x * v.y * h;
b.x += h * (sq(v.y) * P.x - (v.x * v.y * P.y));
b.y += h * (sq(v.x) * P.y - (v.x * v.y * P.x));
}
// First check problem determinant
double det = Sx2 * Sy2 - sq(Sxy);
if (fabs(det) < 0.1) return 0;
// Now construct linear system
TAffine M(Sx2 / det, Sxy / det, 0, Sxy / det, Sy2 / det, 0);
m_newJointPosition = M * b;
// Finally, check if J is too far from the line extensions of the entering
// sequences
for (a = m_enteringSequences.begin(); a != m_enteringSequences.end(); ++a) {
P = planeProjection(*a->m_graphHolder->getNode(a->m_head));
if (tdistance(m_newJointPosition, a->m_direction, P) >
a->m_height * lineDistMul)
return 0;
}
return 1;
}
//--------------------------------------------------------------------------
//---------------------------------------
// Calculate optimal joint heights
//---------------------------------------
// Globals
namespace {
const std::vector<EnteringSequence> *currEnterings;
const std::vector<unsigned int> *heightIndicesPtr;
std::vector<double> *optHeights;
double optMeanError;
double hMax;
}
//--------------------------------------------------------------------------
inline bool checkCircles(std::vector<double> &heights) {
unsigned int i, j;
double cos, sin, frac;
TPointD vi, vj;
// Execute test on angle-consecutive EnteringSequences couples
for (j = 0, i = currEnterings->size() - 1; j < currEnterings->size();
i = j, ++j) {
vi = (*currEnterings)[i].m_direction;
vj = (*currEnterings)[j].m_direction;
sin = cross(vi, vj);
if (heights[i] == heights[j]) goto test_against_max_height;
frac = heights[i] / heights[j];
if (sin < 0) return 0;
cos = vi * vj;
if (cos < 0 && (frac < -cos || frac > (-1 / cos))) return 0;
test_against_max_height:
// Reusing cos
cos = (sin < 0.1)
? std::max(heights[i], heights[j])
: norm((vi * (heights[j] / sin)) + (vj * (heights[i] / sin)));
if (cos < hMax) return 0;
}
return 1;
}
//--------------------------------------------------------------------------
inline void tryConfiguration(const std::vector<unsigned int> &bounds) {
std::vector<double> currHeights(currEnterings->size());
double mean, currMeanError = 0;
unsigned int i, j, first, end;
for (i = 0, first = 0; i <= bounds.size(); first = end, ++i) {
end = i < bounds.size() ? end = bounds[i] + 1 : currEnterings->size();
// Calculate mean from first (included) to end (not included)
for (j = first, mean = 0; j < end; ++j)
mean += (*currEnterings)[(*heightIndicesPtr)[j]].m_height;
mean /= end - first;
// Check if the distance from extremities to mean is tolerable
if (std::max((*currEnterings)[(*heightIndicesPtr)[end - 1]].m_height - mean,
mean - (*currEnterings)[(*heightIndicesPtr)[first]].m_height) >
hDiffMul * mean)
return;
// Calculate squared error to mean
for (j = first; j < end; ++j)
currMeanError +=
sq((*currEnterings)[(*heightIndicesPtr)[j]].m_height - mean);
// Set calculated currHeights
for (j = first; j < end; ++j) currHeights[(*heightIndicesPtr)[j]] = mean;
}
// Update current maximum height
hMax = mean; // Global
// If this configuration could be better than current, launch circle test
if (optHeights->empty() || currMeanError < optMeanError) {
if (checkCircles(currHeights)) {
(*optHeights) = currHeights;
optMeanError = currMeanError;
}
}
}
//--------------------------------------------------------------------------
class hLess {
public:
std::vector<EnteringSequence> &m_entSequences;
hLess(std::vector<EnteringSequence> &v) : m_entSequences(v) {}
inline bool operator()(unsigned int a, unsigned int b) {
return m_entSequences[a].m_height < m_entSequences[b].m_height;
}
};
//--------------------------------------------------------------------------
// EXPLANATION: We build intervals on which height means are done.
// Their right Interval Bounds are supposed INCLUDED.
// Example: heights[]= {1, 2, 3, 4}; rightIntervalBounds[]={0, 2};
// => do height means on: {1}, {2,3}, {4}. (*)
// After means are calculated, a test on the obtained configuration is
// performed. Among those configurations which pass the test, the one
// with rightIntervalBounds.size()->min and, on same sizes,
// currMeanError->min is the 'best' configuration possible.
// If no height configuration pass the test, reconstruction fails.
//(*) NOTE: The right Interval Bounds will never include index n-1, which
// interferes with push_backs.
inline bool JunctionArea::makeHeights() {
std::vector<unsigned int> heightOrderedIndices;
std::vector<unsigned int> rightIntervalBounds;
std::vector<double> optimalHeights;
unsigned int i, n, m;
// Sort entering sequences' indices for increasing height/thickness
heightOrderedIndices.resize(m_enteringSequences.size());
for (i = 0; i < m_enteringSequences.size(); ++i) heightOrderedIndices[i] = i;
sort(heightOrderedIndices.begin(), heightOrderedIndices.end(),
hLess(m_enteringSequences));
// Initialize globals/references
currEnterings = &m_enteringSequences;
heightIndicesPtr = &heightOrderedIndices;
optMeanError = 0;
optHeights = &optimalHeights;
// Now build height-mean configurations and launch their tests
n = m_enteringSequences.size();
// The m=0 case is done first, apart
rightIntervalBounds.resize(0);
tryConfiguration(rightIntervalBounds);
for (m = 1; m < n && optimalHeights.empty(); ++m) {
// Initialize bounds
rightIntervalBounds.resize(1);
rightIntervalBounds[0] = 0;
while (!rightIntervalBounds.empty()) {
// Fill bounds if necessary
while (rightIntervalBounds.size() < m)
rightIntervalBounds.push_back(rightIntervalBounds.back() + 1);
tryConfiguration(rightIntervalBounds);
//'Advance' configuration: increment last index and pop those
// exceeding valid size. If bounds gets empty, done all configs
// with m+1 intervals.
while ((
++rightIntervalBounds.back(),
rightIntervalBounds.back() < n - 1 - (m - rightIntervalBounds.size())
? 0
: (rightIntervalBounds.pop_back(), !rightIntervalBounds.empty())))
;
}
}
if (!optimalHeights.empty()) {
for (i = 0; i < n; ++i) m_enteringSequences[i].m_height = optimalHeights[i];
return 1;
}
return 0;
}
//==========================================================================
//------------------------------
// Area Calculation Main
//------------------------------
class EntSequenceLess {
public:
EntSequenceLess() {}
inline bool operator()(const EnteringSequence &a, const EnteringSequence &b) {
// m_direction is normalized, therefore:
return a.m_direction.y >= 0
? b.m_direction.y >= 0 ? a.m_direction.x > b.m_direction.x : 1
: b.m_direction.y < 0 ? a.m_direction.x < b.m_direction.x : 0;
}
};
//--------------------------------------------------------------------------
bool JunctionArea::calculateReconstruction() {
unsigned int i;
if (m_enteringSequences.size() == 0) return 0;
// Apply preliminary tests for this Junction Area
// a) Check if endpoints got absorbed by the expansion process
for (i = 0; i < m_jointsAbsorbed.size(); ++i)
if (currJSGraph->getNode(m_jointsAbsorbed[i]).degree() == 1) return 0;
// b) Check if the contours shape resembles that of a crossing
sort(m_enteringSequences.begin(), m_enteringSequences.end(),
EntSequenceLess());
if (!checkShape()) return 0;
// c) Build the new junction Point plane position
if (!solveJunctionPosition()) return 0;
// d) Build joint optimal heights (each for entering sequence...)
if (!makeHeights()) return 0;
return 1;
}
//==========================================================================
//---------------------------
// Sequences Pull Back
//---------------------------
// EXPLANATION: We have to insure that connecting entering sequences to the
// new junction point happens *smoothly*. In order to do this, wh withdraw
// entering sequences along the enterin road, until the angle given by the
// connecting line and the entering direction is small.
// However, sequence pull back can be done only under some constraints:
// * we have to remain inside a road axis
// * ........................ a given fat line around the entering direction
inline bool JunctionArea::sequencesPullBack() {
std::vector<EnteringSequence>::iterator a;
double alongLinePosition, distanceFromLine;
unsigned int i, iLink, tail;
TPointD P;
for (a = m_enteringSequences.begin(); a != m_enteringSequences.end(); ++a) {
i = a->m_head;
iLink = a->m_headLink;
// NOTE: updated tails are stored this way, *DONT* look in a->m_tail
// because these typically store old infos
tail =
currJSGraph->getNode(a->m_initialJoint).getLink(a->m_outerLink)->m_tail;
P = planeProjection(*a->m_graphHolder->getNode(a->m_head));
while (i != tail) {
alongLinePosition = a->m_direction * (m_newJointPosition - P);
distanceFromLine = tdistance(m_newJointPosition, a->m_direction, P);
if (alongLinePosition >= 0 &&
(distanceFromLine / alongLinePosition) <= 0.5)
goto found_pull_back;
// We then take the next arc and check it
if (!a->m_graphHolder->getNode(i).getLink(iLink)->hasAttribute(
SkeletonArc::ROAD))
return 0; // Pull back failed
a->next(i, iLink);
P = planeProjection(*a->m_graphHolder->getNode(i));
if (tdistance(P, a->m_direction, m_newJointPosition) >
std::max(pullBackMul * a->m_height, 1.0))
return 0; // Pull back failed
}
// Now checking opposite sequence extremity
if (alongLinePosition < 0 || (distanceFromLine / alongLinePosition) > 0.5)
return 0;
found_pull_back:
a->m_head = i;
a->m_headLink = iLink;
}
return 1;
}
//--------------------------------------------------------------------------
//----------------------------------------------
// Substitute new junction configuration
//----------------------------------------------
void JunctionArea::apply() {
std::vector<EnteringSequence>::iterator a;
unsigned int newJoint, newSkeletonNode;
unsigned int head, headLink, tail, tailLink;
unsigned int outerJoint, outerLink;
unsigned int i, next, nextLink;
// First, check if Entering Sequences pullback is possible
if (!sequencesPullBack()) return;
// Then, we can substitute the old configuration
// First, sign as 'ELIMINATED' all absorbed joints
for (i = 0; i < m_jointsAbsorbed.size(); ++i)
currJSGraph->node(m_jointsAbsorbed[i])
.setAttribute(JointSequenceGraph::ELIMINATED);
newJoint = currJSGraph->newNode();
for (a = m_enteringSequences.begin(); a != m_enteringSequences.end(); ++a) {
// Initialize infos
newSkeletonNode =
a->m_graphHolder->newNode(T3DPointD(m_newJointPosition, a->m_height));
// Retrieve sequence infos to substitute
// NOTE: We update *tail* infos in currJSGraph sequences after each "apply"
const JointSequenceGraph::Link &tempLink =
currJSGraph->getNode(a->m_initialJoint).getLink(a->m_outerLink);
head = tempLink->m_head;
headLink = tempLink->m_headLink;
tail = tempLink->m_tail;
tailLink = tempLink->m_tailLink;
outerJoint = tempLink.getNext();
// Find outerLink - from outerJoint to a->m_initialJoint
for (i = 0;
(currJSGraph->getNode(outerJoint).getLink(i)->m_tail != head) ||
(currJSGraph->getNode(outerJoint).getLink(i)->m_tailLink != headLink);
++i)
;
outerLink = i;
// Now, provide skeleton linkages
// NOTE: Discriminate between the following cases
// a) m_head->degree == 2
// b) m_head == m_tail
// c) m_head == original m_head - or, (m_head!=m_tail && m_head->deg>2)
if (a->m_graphHolder->getNode(a->m_head).degree() == 2) {
a->m_graphHolder->newLink(newSkeletonNode, a->m_head);
a->m_graphHolder->node(a->m_head)
.link(!a->m_headLink)
.setNext(newSkeletonNode);
a->m_graphHolder->node(a->m_head)
.link(!a->m_headLink)
->setAttribute(SkeletonArc::ROAD);
// Better clear road attribute or set it?
} else if (a->m_head == tail) {
a->m_graphHolder->newLink(newSkeletonNode, tail);
a->m_graphHolder->node(tail).link(tailLink).setNext(newSkeletonNode);
a->m_graphHolder->node(tail).link(tailLink)->setAttribute(
SkeletonArc::ROAD);
} else //(a->m_head == head)
{
// In this case, better introduce further a new substitute of head
unsigned int newHead = a->m_graphHolder->newNode(
T3DPointD(*a->m_graphHolder->getNode(a->m_head)));
a->m_graphHolder->newLink(newSkeletonNode, newHead);
a->m_graphHolder->newLink(newHead, newSkeletonNode);
// Link newHead on the other side
next = a->m_graphHolder->getNode(head).getLink(headLink).getNext();
nextLink = a->m_graphHolder->getNode(next).linkOfNode(head);
a->m_graphHolder->newLink(newHead, next);
a->m_graphHolder->node(next).link(nextLink).setNext(newHead);
}
// Finally, update joint linkings and sequence tails.
Sequence newSequence;
newSequence.m_graphHolder = a->m_graphHolder;
newSequence.m_head = newSkeletonNode;
newSequence.m_headLink = 0;
newSequence.m_tail = tail;
newSequence.m_tailLink = tailLink;
currJSGraph->node(outerJoint).link(outerLink).setNext(newJoint);
currJSGraph->node(outerJoint).link(outerLink)->m_tail = newSkeletonNode;
currJSGraph->node(outerJoint).link(outerLink)->m_tailLink = 0;
currJSGraph->newLink(newJoint, outerJoint, newSequence);
}
}
//--------------------------------------------------------------------------
//-------------------------------
// Junction Recovery Main
//-------------------------------
// EXPLANATION: Junction Recovery attempts reconstruction of badly-behaved
// crossings in the raw skeleton of the image.
// void inline junctionRecovery(Contours* polygons)
void junctionRecovery(Contours *polygons, VectorizerCoreGlobals &g) {
globals = &g;
unsigned int i, j;
std::vector<JunctionArea> junctionAreasList;
// For all joints not processed by the Recoverer, launch a new junction
// area reconstruction
for (i = 0; i < globals->organizedGraphs.size(); ++i) {
currJSGraph = &globals->organizedGraphs[i];
currContourFamily = &(*polygons)[contourFamilyOfOrganized[i]];
junctionAreasList.clear();
// First, graph roads are found and signed on the skeleton
findRoads(*currJSGraph);
// Then, junction areas are identified and reconstructions are calculated
for (j = 0; j < currJSGraph->getNodesCount(); ++j)
if (!currJSGraph->getNode(j).hasAttribute(JointSequenceGraph::REACHED)) {
junctionAreasList.push_back(JunctionArea());
junctionAreasList.back().expandArea(j);
if (!junctionAreasList.back().calculateReconstruction())
junctionAreasList.pop_back();
}
// Finally, reconstructions are substituted inside the skeleton
for (j = 0; j < junctionAreasList.size(); ++j) junctionAreasList[j].apply();
}
}