/*
* -- SuperLU routine (version 3.0) --
* Univ. of California Berkeley, Xerox Palo Alto Research Center,
* and Lawrence Berkeley National Lab.
* October 15, 2003
*
*/
#include "slu_sdefs.h"
main(int argc, char *argv[])
{
/*
* Purpose
* =======
*
* The driver program SLINSOLX2.
*
* This example illustrates how to use SGSSVX to solve systems repeatedly
* with the same sparsity pattern of matrix A.
* In this case, the column permutation vector perm_c is computed once.
* The following data structures will be reused in the subsequent call to
* SGSSVX: perm_c, etree
*
*/
char equed[1];
yes_no_t equil;
trans_t trans;
SuperMatrix A, A1, L, U;
SuperMatrix B, B1, X;
NCformat *Astore;
NCformat *Ustore;
SCformat *Lstore;
float *a, *a1;
int *asub, *xa, *asub1, *xa1;
int *perm_r; /* row permutations from partial pivoting */
int *perm_c; /* column permutation vector */
int *etree;
void *work;
int info, lwork, nrhs, ldx;
int i, j, m, n, nnz;
float *rhsb, *rhsb1, *rhsx, *xact;
float *R, *C;
float *ferr, *berr;
float u, rpg, rcond;
mem_usage_t mem_usage;
superlu_options_t options;
SuperLUStat_t stat;
extern void parse_command_line();
#if ( DEBUGlevel>=1 )
CHECK_MALLOC("Enter main()");
#endif
/* Defaults */
lwork = 0;
nrhs = 1;
equil = YES;
u = 1.0;
trans = NOTRANS;
/* Set the default input options:
options.Fact = DOFACT;
options.Equil = YES;
options.ColPerm = COLAMD;
options.DiagPivotThresh = 1.0;
options.Trans = NOTRANS;
options.IterRefine = NOREFINE;
options.SymmetricMode = NO;
options.PivotGrowth = NO;
options.ConditionNumber = NO;
options.PrintStat = YES;
*/
set_default_options(&options);
/* Can use command line input to modify the defaults. */
parse_command_line(argc, argv, &lwork, &u, &equil, &trans);
options.Equil = equil;
options.DiagPivotThresh = u;
options.Trans = trans;
if ( lwork > 0 ) {
work = SUPERLU_MALLOC(lwork);
if ( !work ) {
ABORT("DLINSOLX: cannot allocate work[]");
}
}
/* Read matrix A from a file in Harwell-Boeing format.*/
sreadhb(&m, &n, &nnz, &a, &asub, &xa);
if ( !(a1 = floatMalloc(nnz)) ) ABORT("Malloc fails for a1[].");
if ( !(asub1 = intMalloc(nnz)) ) ABORT("Malloc fails for asub1[].");
if ( !(xa1 = intMalloc(n+1)) ) ABORT("Malloc fails for xa1[].");
for (i = 0; i < nnz; ++i) {
a1[i] = a[i];
asub1[i] = asub[i];
}
for (i = 0; i < n+1; ++i) xa1[i] = xa[i];
sCreate_CompCol_Matrix(&A, m, n, nnz, a, asub, xa, SLU_NC, SLU_S, SLU_GE);
Astore = A.Store;
printf("Dimension %dx%d; # nonzeros %d\n", A.nrow, A.ncol, Astore->nnz);
if ( !(rhsb = floatMalloc(m * nrhs)) ) ABORT("Malloc fails for rhsb[].");
if ( !(rhsb1 = floatMalloc(m * nrhs)) ) ABORT("Malloc fails for rhsb1[].");
if ( !(rhsx = floatMalloc(m * nrhs)) ) ABORT("Malloc fails for rhsx[].");
sCreate_Dense_Matrix(&B, m, nrhs, rhsb, m, SLU_DN, SLU_S, SLU_GE);
sCreate_Dense_Matrix(&X, m, nrhs, rhsx, m, SLU_DN, SLU_S, SLU_GE);
xact = floatMalloc(n * nrhs);
ldx = n;
sGenXtrue(n, nrhs, xact, ldx);
sFillRHS(trans, nrhs, xact, ldx, &A, &B);
for (j = 0; j < nrhs; ++j)
for (i = 0; i < m; ++i) rhsb1[i+j*m] = rhsb[i+j*m];
if ( !(perm_c = intMalloc(n)) ) ABORT("Malloc fails for perm_c[].");
if ( !(perm_r = intMalloc(m)) ) ABORT("Malloc fails for perm_r[].");
if ( !(etree = intMalloc(n)) ) ABORT("Malloc fails for etree[].");
if ( !(R = (float *) SUPERLU_MALLOC(A.nrow * sizeof(float))) )
ABORT("SUPERLU_MALLOC fails for R[].");
if ( !(C = (float *) SUPERLU_MALLOC(A.ncol * sizeof(float))) )
ABORT("SUPERLU_MALLOC fails for C[].");
if ( !(ferr = (float *) SUPERLU_MALLOC(nrhs * sizeof(float))) )
ABORT("SUPERLU_MALLOC fails for ferr[].");
if ( !(berr = (float *) SUPERLU_MALLOC(nrhs * sizeof(float))) )
ABORT("SUPERLU_MALLOC fails for berr[].");
/* Initialize the statistics variables. */
StatInit(&stat);
/* ------------------------------------------------------------
WE SOLVE THE LINEAR SYSTEM FOR THE FIRST TIME: AX = B
------------------------------------------------------------*/
sgssvx(&options, &A, perm_c, perm_r, etree, equed, R, C,
&L, &U, work, lwork, &B, &X, &rpg, &rcond, ferr, berr,
&mem_usage, &stat, &info);
printf("First system: sgssvx() returns info %d\n", info);
if ( info == 0 || info == n+1 ) {
/* This is how you could access the solution matrix. */
float *sol = (float*) ((DNformat*) X.Store)->nzval;
if ( options.PivotGrowth ) printf("Recip. pivot growth = %e\n", rpg);
if ( options.ConditionNumber )
printf("Recip. condition number = %e\n", rcond);
Lstore = (SCformat *) L.Store;
Ustore = (NCformat *) U.Store;
printf("No of nonzeros in factor L = %d\n", Lstore->nnz);
printf("No of nonzeros in factor U = %d\n", Ustore->nnz);
printf("No of nonzeros in L+U = %d\n", Lstore->nnz + Ustore->nnz - n);
printf("FILL ratio = %.1f\n", (float)(Lstore->nnz + Ustore->nnz - n)/nnz);
printf("L\\U MB %.3f\ttotal MB needed %.3f\n",
mem_usage.for_lu/1e6, mem_usage.total_needed/1e6);
if ( options.IterRefine ) {
printf("Iterative Refinement:\n");
printf("%8s%8s%16s%16s\n", "rhs", "Steps", "FERR", "BERR");
for (i = 0; i < nrhs; ++i)
printf("%8d%8d%16e%16e\n", i+1, stat.RefineSteps, ferr[i], berr[i]);
}
fflush(stdout);
} else if ( info > 0 && lwork == -1 ) {
printf("** Estimated memory: %d bytes\n", info - n);
}
if ( options.PrintStat ) StatPrint(&stat);
StatFree(&stat);
Destroy_CompCol_Matrix(&A);
Destroy_Dense_Matrix(&B);
if ( lwork >= 0 ) { /* Deallocate storage associated with L and U. */
Destroy_SuperNode_Matrix(&L);
Destroy_CompCol_Matrix(&U);
}
/* ------------------------------------------------------------
NOW WE SOLVE ANOTHER LINEAR SYSTEM: A1*X = B1
ONLY THE SPARSITY PATTERN OF A1 IS THE SAME AS THAT OF A.
------------------------------------------------------------*/
options.Fact = SamePattern;
StatInit(&stat); /* Initialize the statistics variables. */
sCreate_CompCol_Matrix(&A1, m, n, nnz, a1, asub1, xa1,
SLU_NC, SLU_S, SLU_GE);
sCreate_Dense_Matrix(&B1, m, nrhs, rhsb1, m, SLU_DN, SLU_S, SLU_GE);
sgssvx(&options, &A1, perm_c, perm_r, etree, equed, R, C,
&L, &U, work, lwork, &B1, &X, &rpg, &rcond, ferr, berr,
&mem_usage, &stat, &info);
printf("\nSecond system: sgssvx() returns info %d\n", info);
if ( info == 0 || info == n+1 ) {
/* This is how you could access the solution matrix. */
float *sol = (float*) ((DNformat*) X.Store)->nzval;
if ( options.PivotGrowth ) printf("Recip. pivot growth = %e\n", rpg);
if ( options.ConditionNumber )
printf("Recip. condition number = %e\n", rcond);
Lstore = (SCformat *) L.Store;
Ustore = (NCformat *) U.Store;
printf("No of nonzeros in factor L = %d\n", Lstore->nnz);
printf("No of nonzeros in factor U = %d\n", Ustore->nnz);
printf("No of nonzeros in L+U = %d\n", Lstore->nnz + Ustore->nnz - n);
printf("L\\U MB %.3f\ttotal MB needed %.3f\n",
mem_usage.for_lu/1e6, mem_usage.total_needed/1e6);
if ( options.IterRefine ) {
printf("Iterative Refinement:\n");
printf("%8s%8s%16s%16s\n", "rhs", "Steps", "FERR", "BERR");
for (i = 0; i < nrhs; ++i)
printf("%8d%8d%16e%16e\n", i+1, stat.RefineSteps, ferr[i], berr[i]);
}
fflush(stdout);
} else if ( info > 0 && lwork == -1 ) {
printf("** Estimated memory: %d bytes\n", info - n);
}
if ( options.PrintStat ) StatPrint(&stat);
StatFree(&stat);
SUPERLU_FREE (xact);
SUPERLU_FREE (etree);
SUPERLU_FREE (perm_r);
SUPERLU_FREE (perm_c);
SUPERLU_FREE (R);
SUPERLU_FREE (C);
SUPERLU_FREE (ferr);
SUPERLU_FREE (berr);
Destroy_CompCol_Matrix(&A1);
Destroy_Dense_Matrix(&B1);
Destroy_Dense_Matrix(&X);
if ( lwork == 0 ) {
Destroy_SuperNode_Matrix(&L);
Destroy_CompCol_Matrix(&U);
} else if ( lwork > 0 ) {
SUPERLU_FREE(work);
}
#if ( DEBUGlevel>=1 )
CHECK_MALLOC("Exit main()");
#endif
}
/*
* Parse command line options to get relaxed snode size, panel size, etc.
*/
void
parse_command_line(int argc, char *argv[], int *lwork,
double *u, yes_no_t *equil, trans_t *trans )
{
int c;
extern char *optarg;
while ( (c = getopt(argc, argv, "hl:u:e:t:")) != EOF ) {
switch (c) {
case 'h':
printf("Options:\n");
printf("\t-l <int> - length of work[*] array\n");
printf("\t-u <int> - pivoting threshold\n");
printf("\t-e <0 or 1> - equilibrate or not\n");
printf("\t-t <0 or 1> - solve transposed system or not\n");
exit(1);
break;
case 'l': *lwork = atoi(optarg);
break;
case 'u': *u = atof(optarg);
break;
case 'e': *equil = atoi(optarg);
break;
case 't': *trans = atoi(optarg);
break;
}
}
}